"Wait for sound" code not working in Mac OS X with 11.5
Here is the code:
on exitFrame me
if sound(1) status <>0 then go to the frame
end
This worked fine in Director MX 2004, but in Director 11.5 it is causing unpredictable results in Mac OS X (works fine in Windows). Sometimes it stalls on the frame, sometimes it ignores the code, etc. Can someone suggest a solution here? The code should pause the playhead until the sound completes in channel one, then move onto the next frame (like the old "if sound busy" code). Thanks in advance for any help with this. I did search this forums and could not find this issue addressed.
I may have answered my own question. Does anyone see a problem with this code?
onexitFrame.me
if (sound(1).isBusy())then
_movie.go(_movie.frame)
end if
end
Similar Messages
-
When I play my music and use YouTube and stuff like that my sound is not working what is going on with my iPhone 4s
Hi Jillianfromny!
I have an article here that seems to describe your issue, and can provide some troubleshooting steps for you to follow that will help you resolve this issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
As you can see, this is a very simple code to play a sound.
however it is not working, i don't see any reason why is not
working but it says that play is not a property of snd."ChicoNERD" <[email protected]> wrote in
message
news:gi18it$1v3$[email protected]..
> As you can see, this is a very simple code to play a
sound.
> however it is not working, i don't see any reason why is
not working but
> it
> says that play is not a property of snd.
>
> <?xml version="1.0" encoding="utf-8"?>
> <mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
> layout="absolute">
>
> <mx:Panel width="300" height="150" title="MP3
Player">
> <mx:Script>
> <![CDATA[
> var snd:Sound = new Sound(new
URLRequest("smallSound.mp3"));
> snd.play();
>
> ]]>
> </mx:Script>
> </mx:Panel>
> </mx:Application>
Youi can't issue function calls unless you're within a
function.
HTH;
Amy -
Hi can you help the sound is not working on my Mac I have went into settings and there are no option for interal speaker help
Read the documentation at the links. They won't hurt your data.
Basically smc reset is shutdown, pull your plug for 15 seconds, plug it back in, wait 5 seconds, and reboot. Harmless to you. Resets the smc.
Pram reset is similar but you need to push commnd-option-P-R after the boot chime. Read what does.
smc and pram reset -
Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host> -
Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.
No sound form :
- Speaker?
- Headphones?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Sound is not working for my TV Shows
My sound is not working for just my TV Shows. Sound for the music is just fine. I would appreciate any help given. Thanks!
If you go back 4 pages you'll find a lot of responses about the same problem. Towards the bottom of this link to that page, Lex came up with a band-aid for the problem until iTunes gets it fixed. Lex's fix worked for me and some others. Since I did as he suggested, I have downloaded two movies and put them over to my iPod. I can also see them on my computer screen and hear them too.
Possible Temp Help -
Sound is not working for Siri, voice mail, ringer tones, movies or music. I was told by verizon that the speaker maybe out, but that i might want to try and reload or update my itunes by plgging into my home computer... will this help and if so how do I do this?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
My iPhone's sound does not work except for the alarm and the volume bar is not there.
Hi, thank you in advance if you can help.
When my iphone 4 is not plugged in to headphones the sound does not work, and if I try to adjust the sound with the plus and minus buttons in the side it comes up like normal saying "Ringer" but then there is no bar underneath it. Sometimes the sound will work for a couple of minutes. However, there is definitely no problem with the speaker as the alarm always works perfectly fine.
I have tried restoring it, this did not help.what you could even try is to write down a few contacts that you would need to get through a single day, restore it to factory, punch in those few odd contacts,
No. What he should be doing is syncing his contacts to an app on his computer or cloud service, then sync them back to the phone (without restoring the backup).
Never rely on the backup for contacts. The contact info stored there may be incomplete and is only meant to maintain the recent calls and favorites lists. -
Unknown Audio Driver Needed for HP Pavillion DV6910us because sound is not working
1.HP Pavilion DV6910us
2. Came with Windows Vista but computer was re-imaged and now has Windows 7
Sound is not working and the error says No Audio Output Device is installedWould like to know the product number of the notebook as it i essential for us to look for the drivers and solutions. Below link helps you find the product and the serial number oif the notebook.
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
Let us know for more!
"I work for HP."
Click the Kudos star to say thanks
Please mark Accept As Solution if it solves your problem
Regards
Sreenag -
i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution
Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy -
Action Script 3 code not working for start and stop button?
Ok so I have this simple animation I created of a circle that moves from one side of the stage to the other. I have added a new layer and called it buttons. On this layer I have added 2 buttons. One for start and another one for stop. The purpose is to get my circle to move from one side of the stage to the other but be able to use my buttons so that I can start and stop the animations at random times during playback. I fixed all my compiler errors now the problem lies in that everytime I click the start or the stop button I get an output error. I have a 3rd layer in which is titled actions and this is where all my code is posted. I removed that layer and placed my code in the first frame of the buttons layer to see if this would change anything but I still get the same output errors. So I just added back my actions layer. What could I be doing wrong? I have made sure to name all my movie clips and buttons correctly and I even added an instance name to them.
Here is my code and the errors I am getting when I press the play and stop button on test-
start_btn.addEventListener(MouseEvent.CLICK, startCircle);
stop_btn.addEventListener(MouseEvent.CLICK, stopCircle);
function startCircle(e:MouseEvent):void{
circle.play();
function stopCircle(e:MouseEvent):void{
circle.stop();
green_btn.addEventListener(MouseEvent.CLICK, greenCircle);
red_btn.addEventListener(MouseEvent.CLICK, redCircle);
function greenCircle(e:MouseEvent):void{
circle.play();
function redCircle(e:MouseEvent):void{
circle.stop();
Here are my output errors-
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at exercise2_fla::MainTimeline/redCircle()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at exercise2_fla::MainTimeline/greenCircle()ok so my circle is my movie clip and it is titled circle and the instance name is circle. Am I supposed to change MovieClip to circle? I put the code at the top of my actions script but for some reason it did not work. I did change play to stop and it got the movie clip to stop when I do test movie but my buttons still do not work. So I changed stop back to play. Strange.
I did try changing MovieClip to circle but that did not work so I did Circle with a capital C and that did me no good eigther.
I meant to add that I did get an error that said- 1180 Call to a possibly undefined method circle. -
WAITING FOR TIME CODE....again
Hi, when I try to capture from DV device, the capture window appears "PREVIEW DISABLED" I can remote the dv device, mark time code in or out, play tape, pause tape, the time code in the capture window run and is the same taht the tape, but when I do batch capture, cpture clip or capture now, the preview window of catpure says : "WAITING FOR TIME CODE" "DEVICE MUST IN VTR MODE WHEN DEVICE CONTROL IS ENABLED" and when I abort the capture this message apperas: "THIS OPERATION COULD NOT BE COMPLETED AS THERE IS NO VIDEO", Quicktime pro is unabled to capture too, but IMOVIE capture without this problem. I download the firewire sdk from developer connection of apple and use AVCVideo Cap, and no problem for cature, so , my Firewire or dv devices are ok, with DVHSCap I capture PRO HD JVC very well.
Resume , I think there is a problem with quicktime and DV format, My Ibook G4 with FCP 5.0.1 capture from DV devices OK, without problem. If anybody resolved this please comment with us. I work to day with FCP 6.0.4 and quicktime 7.5 and Mac os 10.4.11 and 10.5.4 the problem is afected my PowerPC G5 and my powerbook intel. Another point of interest is that this problem is RANDOM, some times I can capture from DV devices in the first time, some times I can't capture.Hey AL
How ya doin buddy?
"Either way, try an Easy Setup>DV Converter, to match your video standard (Pal or NTSC)."
Yep - did that
Yes actually my older Sony TVR-310 camcorder IS a digital unit which can also play back analog tapes.
As I'm getting my way around now in FCE, I'm coming to some conclusions in regard to FCE's capture capability.
First let me say that I've also tried capturing some footage in FCE with my other Sony TVR-950, and have had dropped frames, and also breaks in time code.
I thought dropped frames were strictly a PC issue?
Anyway, it appears to me that FCE is VERY sensitive to time code issues NO matter which camera is in the chain.
In fact, I've also read here where folks have a lot of trouble with their Canon GL2's as well. Some of you have even suggested to do your captures in a cheaper Mini DV, or a clam-shell playback machine. This conserves the heads on your GL2 as well.
But why would FCE do better in regard to capturing and time code, with a cheaper Mini DV Camcorder? Perhaps I'm missing something here?
Perhaps iMovie doesn't care about the same issue?
Now my main question is:
Ok I'll use iMovie6 HD (tried and true), to capture ALL my footage and just save the DV files to be edited later (imported) into FCE.
Does this sound like a viable solution to FCE's time code issues?
Will my iMovie captures be JUST AS GOOD as if they were done in FCE?
Thanx so much guys!
Mike -
Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?
Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
I came home, banged the phone against the wall and it worked.
Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well. -
My own built fullscreen mode flv player is not working in Mac OS
I built a flv player, it is just a normal video player with a
fullscreen mode.
The video player is work fine in Window IE, FF, and Safari.
But not not working in Mac OS X, leopard & tiger &
May I know what might cause this problem?
I m usng action script 3, flash cs3 & all my browsers
already upgrade to latest version of Flash Player.
Help!!!I am running Mac OS X 10.10.1 Yosemite and iPhoto Version 9.6 (910.29). Automatic updates in the Mac App Store is turned on for my iMac and it shows no updates available. I was told directly by Apple Support on the date that I wrote this article (Nov 8, 2014) that there were no Canon drivers and photo transfer software that worked with Yosemite. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution. At that time I was running Mac OS X 10.10 (because the 10.10.1 update was not yet available) and the most up-to-date version of iPhoto for Mac OS X 10.10 that was available at that time, at least per the Mac App Store. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution.
With the Mac OS X 10.10.1 update if the camera is in PTP communications mode the thumbnails now appear in the Import screen in iPhoto almost immediately. If the camera is returned to Normal communications mode; however, it takes forever for the thumbnails to appear. I have been waiting 10 minutes and iPhoto has generated only 14 thumbnails. So it appears that there is still something not working properly between the original Canon EOS Digital Rebel and Mac OS X Yosemite 10.10.1 when the communications mode on the camera is set to Normal.
Maybe you are looking for
-
HT4113 HELP TO UNLOCK MY I POD TOUCH
HELP ME TO UNLOCK MY I POD TOUCH
-
Can i use Iphone 5s contract free t mobile ( USA) in india with local carrer???
Hi , my friend is in USA and buy contract free T-mobile iphone 5s from apple store for me and i m in india He will send me phone by this week I want to know should i unlock it or directly can use with my local gsm sim .
-
Forms 6i error FRM-41351 Cannot navigate out of current form
Does anybody know why this error occurs? I have an ordinary Forms 6i module, running in 2-tier (client-server) mode. When I try to do an EXIT_FORM, I get an error: "FRM-41351: Cannot navigate out of current form" My form is called from a top-level fo
-
Project Search in cProjects 4.0 - Displays all projects
Hi Experts, Project Search in cProjects fetches all projects - across all users and across all project types. This includes projects of project types the user is not authorized to. Well, the user cannot open any of these projects (unless he has autho
-
I am trying to run the following pl/sql where in i want to send an email . DECLARE l_mailhost VARCHAR2(64) := 'mail.mycompany.com'; l_from VARCHAR2(64) := '[email protected]'; l_to VARCHAR2(64) := '[email protected]'; l_mail_conn UTL_SMTP.connection;