Wait time for RFC response

Hi experts,
I am calling an RFC in a remote SAP R/3 system from another SAP system (say CRM).
Is there a timeout parameter value that can be set to a time limit that a calling system can wait for a response from the RFC call? In other words, how can I set up a time parameter in the ABAP program to wait for the RFC and if can not get a response; continue with a set of code.
Any suggestion greatly appreciated <REMOVED BY MODERATOR>
Abbey Qayum
Edited by: Alvaro Tejada Galindo on Feb 25, 2008 2:58 PM

Just to calrify my question;
An RFC is being called in R/3.
The calling system is say CRM.
The question is:
1) If the RFC called system (R/3) is down, what would be the expected response from the called system (R/3) to the requesting system (CRM)? i.e what happens when the called system is down/connection breaks down?
When calling the RFC in R/3, I noticed that the call hangs up and the hour glass shows and waits for the RFC reponse for a long time. How can this be prevented? That is, the RFC call should timeout after a certain time if you don't get a response from the called system. How and where this timeout can be set in the ABAP.
Thanks

Similar Messages

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

What does the option 'Settings- incorrect waiting time for status' do ?

Hi All
We had an infopackage that seemed to be hanging this morning . (Yellow Status) I was advised to access the option 'Settings->incorrect waiting time for status' and set the wait time to 7 minutes (from 7 hours). This changed the status to Red.
I then re-ran the ipak and reset the ''Settings->incorrect waiting time for status' to 7 hours. This made the red process go back to yellow and the run time started going up again.
Can someone explain what is going on. Have I got 2 instances of the same ipak running simulateously. Why did the red one come back to life even thoug I deleted the request in data target for that ipak.
Thanx
HKF

Thanks, Verdi - the first time I enabled,/ or disabled, I hadn't realised what had actually changed, as I think I'm so used to seeing my links open in Safari anyway!

When will I receive my I phone 6 case which i ordered along with the Iphone6 ?As per the website it says october . How long is the wait time for the Iphone 6 case?

When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?

While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value. Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered. For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather" Apple iPhone 6 Case. The store had plenty of all the other colors, but that specific case and color had sold out that morning.

How to add wait time for any of the process in Process chains?

HI
I want to add the wait time for the process in the process chains. How to do it?
Regards
Priya

Hi there,
Here you go:
REPORT ZREPORTNAME. "the name of your report
WAIT UP TO 90 SECONDS. "a wait is set to 90 seconds before starting the chain
"call your chain to be executed after that
CALL FUNCTION 'RSPC_CHAIN_START'
EXPORTING
I_CHAIN = 'ZYOURCHAIN'. "the name of the chain you wish to run
Diogo.

Long wait time for /sap/webcuif/uif_callback

STAD shows following record indicating a very long wait time. Seems the application /sap/webcuif/uif_callback mentioned in the record is a CRM WebClient UI framework related service defined in transaction SICF. I did not observe such long wait time on other HTTP requests and applications. Why could this happen? How to analyze further? The system is CRM703 SP03.
CPU time                       0 ms
RFC+CPIC time                  0 ms
Total time in workprocs        3 ms
   Response time           49.658 ms
Wait for work process     49.655 ms
Processing time                2 ms
Load time                      0 ms
Generating time                0 ms
Roll (in+wait) time            0 ms
Database request time          0 ms
Enqueue time                   0 ms
Number      Roll ins            1
             Roll outs           1
             Enqueues            0
Load time   Program             0 ms
             Screen              0 ms
             CUA interf.         0 ms
Roll time   Out                 0 ms
             In                  0 ms
             Wait                0 ms
Frontend    No.roundtrips       0
             GUI time            0 ms
             Net time            0 ms
Call number                                         6
Connection-Id          6CAE8B34B9581ED49BF5441DA68E2F2A
Communication step     Send/Receive
Timestamp              20141119 131100 CST
Host                   XXXXXXXXX
Port                   8001
Path                   /sap/webcuif/uif_callback
Status phrase          OK
Status code              200
Protocol               HTTP
Method                 POST
Virtual host               0
Calling time                                        2 ms
Remote exec. time                                   0 ms
Data send time                                      0 ms
Data receive time                                   0 ms
Idle time                                           1 ms
Sent data                                         107 Bytes
Received data                                   2.682 Bytes
Thanks.
Regards,
Jason

Hello Jason,
the "Wait for work process" means the request was at the dispatcher queue waiting for a work process.
Probably at that time all the DIA work processes in that instance were occupied.
was that the case?
kind regards,
Mercedes

Wait time for 5 min in process chain

hi Guru,
how to add in the process chin for wait time 5 min.
two flat files are there, once the complete of first flat file wait for another 5 min for the second flat file load.
my question how to add a condition for 5 min wait time , the flat file load after 5 min(means second process is trigger after 5 min).
Thanks in advance
Edited by: priya das on Sep 29, 2008 5:02 AM

See if below threads are useful -
waiting time in process chain
Set delay for process in process chain (BI7)

What's wait time for ATT order nowadays?

I see from Apple's retail web site that most locations now have plenty of inventory.
Does anyone have any idea what the wait time is for iPhones ordered thru ATT?
I have a rather complocated change in my plan to make and feel that ATT will be better to handle than Apple store but I have a really narrow window of time to get one i.e. Aug 19-22.
Message was edited by: nedhamilton

Go to your AT&T store and ask for an iPhone 8G or 16G whatever floats your boat as far as music and video memory goes. When I went there, I paid for a pre-order $208.95. They pinged my credit card on July 19th and didn't charge it until it was shipped on 7/29 and picked up on 7/30. 7/31 they fulfilled the charge.
So it's at least 12 days yes. But if they don't have it in stock then it's that much of a wait time.

11 hour wait time for movie rental!

Over Christmas I got a 2nd generation Apple TV. I was excited but didn't have the time to try it out until tonight. I rented Iron Man 2 in HD and after letting it load for over an hour, I came back to watch it, only to see a wait time of over 11 hours. Is their anything I can due to speed it up? I have no problems renting movies on my macbook. I'm very frustrated.

I'm not an expert either, but the basic idea is that the DNS servers route the internet traffic and commonly cache web pages to speed them up. DNS services claim to be faster than your internet provider and usually provide some claimed protection against fraudulent sites. They also offer some filtering options.
I was using OpenDNS. You can get the idea of what it does here: http://www.opendns.com/solutions/household/
However, if you don't know what it is, then you're probably not using it. You would have to deliberately set it up.
I may be wrong, but I think the idea that these services cause an issue is that your download has to go through the one place rather than finding the fastest place. So, there is a backlog with lots of people now downloading internet video. I've read in a few spots that this is B.S., but since I'm not a computer engineer, I really don't know either. I can only say that on the one test, it was faster without OpenDNS than it was with it.
I'm going to keep trying and see. I'd rather keep OpenDNS if I can.

Too msuch wait time for APEX page rendering

Oracle XE 11gR2 64-bit
RHEL 64-bit
Using EPG
Logged in as sys/sysdba
==================
This is based on the thread at Too much time on network wait!
Referring back to the thread above which seems to have gone 'cold' and for some strange reason the second page of that thread no longer appears/exists.
But on that second page someone mentioned the solution below (with the idea that the EPG was causing the issue of pages rendering slow. Page render fine using Glassfish in another environment).
exec dbms_xdb.cfg_update( updatexml( dbms_xdb.cfg_get(), '/xdbconfig/sysconfig/call-timeout/text()', '300', 'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd"'));
I'd like to try this solution out. However, it fails to even run for me so I was hoping for some clarification.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
SQL> exec dbms_xdb.cfg_update( updatexml( dbms_xdb.cfg_get(), '/xdbconfig/sysconfig/call-timeout/text()', '300', 'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd"'));
BEGIN dbms_xdb.cfg_update( updatexml( dbms_xdb.cfg_get(), '/xdbconfig/sysconfig/call-timeout/text()', '300', 'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd"')); END;
ERROR at line 1:
ORA-06550: line 1, column 28:
PLS-00201: identifier 'UPDATEXML' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
SQL>
Thank you.

the idea that the EPG was causing the issue of pages rendering slow. Page render fine using Glassfish in another environment). Probably the value of the SHARED_SERVERS parameter needs to be increased.
See this article for more info:
http://ora-00001.blogspot.no/2008/04/adventures-with-apex-part-one-boosting.html
- Morten
http://ora-00001.blogspot.com

Is it possible to change the wait time for when you enter an incorrect password on your iphone/ipad?

I reaaally hate how anti-procrastination apps like ColdTurkey don't work for apple products, because what's the point of restricting internet usage on the computer when you can just access it from your apple device? There's no point in using the parental controls or setting passwords for obvious reasons, either.
So I had an idea: from what I know, after guessing the password incorrectly 6 times, the device is locked for 1 min, 7 times, 5 min etc. So I was thinking, is it possible to change the settings, for example, to lock the phone for 60min after 3 wrong password attempts? This would be incredibly helpful!!
(if you know a way but don't want to post it here, please email me instead!)

Thanks a lot Rob. That works.
"Rob Woollen" <[email protected]> wrote in message
news:3f29b665$[email protected]..
java -Djava.io.tmpdir=<tmpdir path> weblogic.appc
-- Rob
Bernhard Lenz wrote:
I realized that weblogic.appc creates a working directory
/var/tmp/appcgen
when compiling ejbs. What happens if 2 developers run weblogic.appc atthe
same time? Will they be using the same temp directory and therefore getin
each others way? I'd rather like to create a temp directory which isunique
for the machine. Our build scripts would be able to create such adirectory
but I couldn't find anything in appc to set the temp directory.
Do you have any advice?
Thanks for your help.
Greetings
Bernie

Waiting time for Apple Care...

Hello!
I'm an italian guy with the "usuals" MBP problems... the Moo Sound it isn't for me a big problem, the whine disturb me a lot.... but, I hate the space bar that doesn't works... VeryoftenIwritelikethisline...
So I think to call Apple to send MBP for assistance. I use this Mac for work every day and my old Powerbook it is already sell... how many time Apple take for assistance? It is possible to make a little poll in the forum?
thank you!
max

Support from Apple varies depending on several factors i.e. type of failure, parts on hand, location of nearest facility, etc. In your case, it’s really hard to tell. Who knows, perhaps they will simply exchange the unit based on the defective keyboard. Anyway, good luck.
p.s. My future wife lives in Verona and I will be there later this month.
Ciao
2.16 MBP (FW 1.0.1) Week-12 build Mac OS X (10.4.6) G4 Tower (OS 9/10), Dell 620 WorkStation (XP Pro), Gateway P4 (XP Home)

Average waiting time for applecare standard service replacement????

Does anyone know how long it usually takes returning you Iphone 4 on the standard replacement option rather than the advanced option which applecare provide you. I sent my iphone on last saturday on the 7th and its not been 9 days but I suppose techniqually its probaly only 5 days seing as delivery only operates in Australia from Monday to Friday. Thats what I thought anyway. There are the floods in Queensland not to forgot so thats probaly held up mail aswell. But with all this would anyone find this odd that I havent heard anything or should I not worry about it?

yeh i'll give that a try actually. I havent asked them the status by phone yet. oh i don't know if you've seen the email they send you with the repair ID on before but it says you must return the Iphone 4 with 10 business days to avoid cancellation. Would Monday to Friday only count as business days or is it from the day I requested the repair and replacement service?

Can I avoid the 24 hours wait time for a membership renewal?

Any ideas? I need to get into InDesign now, not tomorrow.
Best,
Andreas

How do I do that? I already have it installed via the creative cloud.
By the way 24 hours have passed and it's still not renewed. Of course I cannot contact someone else beside the forums here...

Should clients of long-running processes wait for a response?

I am a bit confused by the worklist tutorial where the client waits around for
a response from the worklist process that blocks on human input. This may be okay
for the sample application, but is it a realistic scenario? Have you designed
any practical worklist processes this way? I would have thought that the client
of a worklist process would simply trigger the process and go away. Eventually
when the human involved in the process would take some action, the process would
then, for example, send a message to some application. What do you think? I would
be interested in your opinions and perhaps some real examples of how you are using
worklists.
Thanks.
P.S. Is it even possible for a worklist client to trigger the process and go away?
Would the process die because the client has gone out of scope?

I agree with your comments. In being honest as well, we unfortunately do have SRs that get behind or missed. It's very frustrating on our side as well when we have these come up. We have implemented a number of technologies and also human touch to help us catch these and continue to focus on ways to overcome these delays. I know it's frustrating for you as well.
Our customer satisfaction is very high and actually continues to increase each Qtr. Our data shows us our three key satisfaction areas are; speed of response, speed of resolution and followup.
Chat support helps us in response time, but sometimes may hinder us in resolution times. Especially with more complex issues. Our goals were not to totally replace the phones with chats, but to use chat to allow us to respond more quickly, which it has done. We're now focusing our folks to realize it's still ok to call you when the Chat is hindering resolution and it would be quicker to talk live about the issue.
We resolve over half of the SRs on the first day. We continue to focus on speeding up the resolution of those that go beyond the first day. A couple things we've implemented are we call you back at least every 2 days when the SR is in Novell's court and at least every 5 days when it's in your court. We've also implemented timed escalation for SRs and are now looking at also escalating when progress is not being made after a certain number of days (rather that just time open). The goal is to get you in the hands of the right person asap to speed up the resolution time.
We're also having Managers call you on more and more SRs before being closed to double check your satisfaction with the SR.
Our dream is to never have you need to ask us for attention on a SR. We continue to make progress on it.
I look forward to your thoughts and other ideas you may have to help us improve,
-Todd
Todd Abney
Technical Support Director
Novell

Wait time for RFC response

Similar Messages

Maybe you are looking for