Wait time for 5 min in process chain

hi Guru,
how to add in the process chin for wait time 5 min.
two flat files are there, once the complete of first flat file wait for another 5 min for the second flat file load.
my question how to add a condition for 5 min wait time , the flat file load after 5 min(means second process is trigger after 5 min).
Thanks in advance
Edited by: priya das on Sep 29, 2008 5:02 AM

See if below threads are useful -
waiting time in process chain
Set delay for process in process chain (BI7)

Similar Messages

How to add wait time for any of the process in Process chains?

HI
I want to add the wait time for the process in the process chains. How to do it?
Regards
Priya

Hi there,
Here you go:
REPORT ZREPORTNAME. "the name of your report
WAIT UP TO 90 SECONDS. "a wait is set to 90 seconds before starting the chain
"call your chain to be executed after that
CALL FUNCTION 'RSPC_CHAIN_START'
EXPORTING
I_CHAIN = 'ZYOURCHAIN'. "the name of the chain you wish to run
Diogo.

How can we recognize the time taking for executing any process chain

Hi,
I have one metachain which consists of several local process chain. It was executed successfully. So how can I find out total time for executing this meta chain.Is there any way to find out that this process execution time is lile some hours and some mins.

ST13 trans description is Analysis & Service Tools Launch pad and is part of the ST-A/PI plugin. See Note 69455 - Servicetools for Applications ST-A/PI (ST14, RTCCTOOL, ST12) aand talk to your Basis folks to find out if they can install it since it sounds like it is not installed at your site.
Here's a list of functions the tool provides - only some are BW specific, so if you can not get ST13 authorization, see if you can at least run the pgm
Analysis/Service Tools
Name                     Title
RTCCTOOL              SAP Servicetools Update
ST12                        Single transaction analysis
SDCCVIEWER          SDCC: View data from ST-A/PI subroutines
SOS_CUSTOMER_DATA                Customer Checks for Security Optimitation
BATCH_JOB_ANALYSIS               Batch job analysis
CMO_SYSTEM_MONITORING            CMO - System Monitoring
ITSTRACEVIEW                     ITS trace viewer (SAPjulep) for EBP/CRM
STAD_DATA_GET                    Select STAD data and put to download
BPSTOOLS                         BW-BPS Performance Toolset
BIIPTOOLS                        BI-IP Performance Toolset
BW_QUERY_ACCESSES                BW: aggregate/InfoCube accesses of queries
BW_QUERY_USAGE                   BW: query usage statistics
BW-TOOLS                         BW Tools
SEM_BCS_STATISTIC_ANALYSIS       SEM-BCS: Statistic Analysis
BWQUAC_CUST                      BW Query Alert Collector Customizing
TABLE_ANALYSIS                   Table Analysis Tools
UPGRADE_TOOLS                    Tools for Upgrade
MASS_MAN_MONITORING              Monitoring for Mass Data
CUST_DMA_TAANA                   DVM: Settings for ST14 CA
PROJBROWSER                      Service Software: Local project browser
ANALYSISBROWSER                  Service Software: Analysis browser
SDCC_DOWNLOAD_SIMULATION         SDCC download simulation for ST-A/PI collectors
TEXTBROWSER                      Service Software: Short&Longtext browser
SET_SDCC_PRODUCTIVE_CLIENT       Manually set analysis client for SDCC datacollection
There were a few OSS Notes relating to ST03N dumping you might want to review to see if they need to be applied
Nothing is ever as easy as it ought to be.

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

What does the option 'Settings- incorrect waiting time for status' do ?

Hi All
We had an infopackage that seemed to be hanging this morning . (Yellow Status) I was advised to access the option 'Settings->incorrect waiting time for status' and set the wait time to 7 minutes (from 7 hours). This changed the status to Red.
I then re-ran the ipak and reset the ''Settings->incorrect waiting time for status' to 7 hours. This made the red process go back to yellow and the run time started going up again.
Can someone explain what is going on. Have I got 2 instances of the same ipak running simulateously. Why did the red one come back to life even thoug I deleted the request in data target for that ipak.
Thanx
HKF

Thanks, Verdi - the first time I enabled,/ or disabled, I hadn't realised what had actually changed, as I think I'm so used to seeing my links open in Safari anyway!

To find the time required by the process chain to complete

Hi Experts,
I am calulating the average time required by the process chain to compete.
Is there any way to find the time required by the process chain to complete..
Thanks in advance.
Regards,
Ashwin

Hi,
There is a Tool provided by SAP to do the Process Chain Analysis.
It is basically a ABAP Program /SSA/BWT which provides the following BW Tools:
a)Process Chain Analysis : this tool is used to perform the Runtime analysis of the Process Chains. The analysis can be performed not only at Process Chain level but also at the Process Type level.
b)Detailed Request Analysis
c)Aggregate Toolset
d)Infoprovider BPPO Analysis
So you can go through the program and analyse the runtime of your Process Chains.
Regards,
Abhishek
Edited by: Abhishek Dutta on Aug 13, 2008 7:13 AM

ABAP Routine for Deleting and creating index for ODS in Process chains

Any pointers for the ABAP Routine code for deleting and creating index for ODS in Process chains.

Hi Sachin,
find the following ABAP code to delete ODS ondex.
data : v_ods type RSDODSOBJECT.
move 'ODSname' to v_ods .
CALL FUNCTION 'RSSM_PROCESS_ODS_DROP_INDEXES'
EXPORTING
I_ODS = v_ods.
To create index:
data : v_ods type RSDODSOBJECT.
move 'ODSname' to v_ods .
CALL FUNCTION 'RSSM_PROCESS_ODS_CREA_INDEXES'
EXPORTING
I_ODS = v_ods.
hope it helps....
regards,
Raju

When will I receive my I phone 6 case which i ordered along with the Iphone6 ?As per the website it says october . How long is the wait time for the Iphone 6 case?

When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?

While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value. Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered. For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather" Apple iPhone 6 Case. The store had plenty of all the other colors, but that specific case and color had sold out that morning.

Pointers for optimizing system performance (run time) while running DP process chain with parallel processing

Hi Experts,
We are running APO DP process chain with parallel processing in our company, we are experiencing some issues regarding run time of process chain, need your help on below points;
- What are the ways we can optimize process chain run time.
- Special points we need to take care of in case of parallel processing profiles used in process chain.
- Any specific sequence to be followed for different processes in process chain - if there is some best practice followed.
- Any notes suggesting ways to improve system performance for APO version 7 with different enhancement packs 1 and 2.
Any help will be really appreciated.
Regards

HI Neelesh,
There are many ways to optimize performance of the process chains (background jobs) in APO system.
Firstly I would recommend you to identify the pain areas (steps) which are completing with more runtimes. Then each one of the step has got different approaches to decrease the runtime.
Like you may end up with steps like infopackage executions, DTPs, DP mass processing jobs etc which might be running with more runtimes. So now target each one of them differently and find out the ways to optimize. At the same time the approach you follow should be technically possible with basis perspective (system load and utilization) as well.
And coming to parallel processing, you can use parallel processing for different for different jobs. You can further r explore on the same using parallel processing. Like loading an infocube, mass processing, infopackage execution, DTP, TSCOPY etc.
Check the below link for more info
Performance problems in DP mass processing
Let me know if you require further info.
Regards,
Raj

ABAP Program for set local process chain failed

I would like to execute ABAP Program in local process chain. If the condition is in the pre-defined bussiness rule, local process chain is set to fail.
Currently I use ABAP and Raise Message Error = Message Type E for cancel program. After program is cancelled, local process chain don't know its status, wait for job SAP_CCMS_MONI_BATCH_DP to determine status of process chain and then further execute subsequent process.
I 'm not sure that our solution is right or not about set process chain to fail via ABAP. Please suggest us if there are other solution to set process chain as failed.

Hi.
Plz see my answer to similar question in [this thread|Re: Manage a message at the end of process chain on Web planning Application].
Regards.

Long wait time for /sap/webcuif/uif_callback

STAD shows following record indicating a very long wait time. Seems the application /sap/webcuif/uif_callback mentioned in the record is a CRM WebClient UI framework related service defined in transaction SICF. I did not observe such long wait time on other HTTP requests and applications. Why could this happen? How to analyze further? The system is CRM703 SP03.
CPU time                       0 ms
RFC+CPIC time                  0 ms
Total time in workprocs        3 ms
   Response time           49.658 ms
Wait for work process     49.655 ms
Processing time                2 ms
Load time                      0 ms
Generating time                0 ms
Roll (in+wait) time            0 ms
Database request time          0 ms
Enqueue time                   0 ms
Number      Roll ins            1
             Roll outs           1
             Enqueues            0
Load time   Program             0 ms
             Screen              0 ms
             CUA interf.         0 ms
Roll time   Out                 0 ms
             In                  0 ms
             Wait                0 ms
Frontend    No.roundtrips       0
             GUI time            0 ms
             Net time            0 ms
Call number                                         6
Connection-Id          6CAE8B34B9581ED49BF5441DA68E2F2A
Communication step     Send/Receive
Timestamp              20141119 131100 CST
Host                   XXXXXXXXX
Port                   8001
Path                   /sap/webcuif/uif_callback
Status phrase          OK
Status code              200
Protocol               HTTP
Method                 POST
Virtual host               0
Calling time                                        2 ms
Remote exec. time                                   0 ms
Data send time                                      0 ms
Data receive time                                   0 ms
Idle time                                           1 ms
Sent data                                         107 Bytes
Received data                                   2.682 Bytes
Thanks.
Regards,
Jason

Hello Jason,
the "Wait for work process" means the request was at the dispatcher queue waiting for a work process.
Probably at that time all the DIA work processes in that instance were occupied.
was that the case?
kind regards,
Mercedes

Configuration Guide for Transaction Banking Process Chain - 0TB_DM_INIT_P01

Hi All,
Just wondering whether there is any Configuration Guide available for various Transaction Banking Process Chains, like, [0TB_DM_INIT_P01|http://help.sap.com/saphelp_nw70/helpdata/en/7e/0d6a99cbdf4873998b533e088b6a1b/frameset.htm], etc.
These process chains in Activity Status Coversion (i.e. Dormancy management) are quite complex and I have been able to activate the chains - but while running some of the processes are giving errors...
So, was wondering whether any Building Block Configuration Guide like CRM Analytics (or, others) available or not?
If not, should I just open an OSS ticket to get official guide from SAP?
Thanks for help.
~SSH.

Hi All,
Just wondering whether there is any Configuration Guide available for various Transaction Banking Process Chains, like, [0TB_DM_INIT_P01|http://help.sap.com/saphelp_nw70/helpdata/en/7e/0d6a99cbdf4873998b533e088b6a1b/frameset.htm], etc.
These process chains in Activity Status Coversion (i.e. Dormancy management) are quite complex and I have been able to activate the chains - but while running some of the processes are giving errors...
So, was wondering whether any Building Block Configuration Guide like CRM Analytics (or, others) available or not?
If not, should I just open an OSS ticket to get official guide from SAP?
Thanks for help.
~SSH.

Authorizations setting for running the process chain

Hai
Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id. I have all authorization rights .
Pls let me knw
kumar

Hi,
Authorizations for Process Chains
Use
You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
·        You control whether a user is allowed to perform specific activities.
·        You control whether a user is allowed to schedule the processes in a chain.
The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
See also: Display/Maintenance of Process Chain Attributes ® Execution User.
Features
For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
Display/Maintain Process Chain Attributes
Use
You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
Features
You can display or maintain the following attributes for a process chain:
Process Chain ® Attribute ® ...
Information
Description
( Rename)
You can change the name of the process chain.
Display Components
Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
Documents
You can create and display documents for a process chain.
For more information, see Documents.
Last Changed By
Displays the technical attributes of the process chain:
·        When it was last changed and who by
·        When it was last activated and who by
·        Object directory entry
Evaluation of Process Status
If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as unimportant for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in unimportant processes of the subchain.
Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
Polling Indicator
With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
By selecting the indicator:
-         A high level of process security is guaranteed, and
-         External scheduling tools can be provided with the status of the distributed processes.
However, the system uses more resources; and a background process is required.
Monitoring
With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
By default CCMS switches on the automatic process chain monitoring.
For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
Alerting
You can send alerts using alert management when errors occur in a process chain.
For more information, see Send Alerts for Process Chains.
Background Server
You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
Processing Client
If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC) The chain is activated after import and scheduled, if necessary, in this client.
Execution User
In the standard setting a BI background user executes the process chain (BWREMOTE).
You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
The setting is transported.
The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
Job Priority
You use this attribute to set the job priority for all of the jobs in a process chain.
Hareesh

Is it possible to change the wait time for when you enter an incorrect password on your iphone/ipad?

I reaaally hate how anti-procrastination apps like ColdTurkey don't work for apple products, because what's the point of restricting internet usage on the computer when you can just access it from your apple device? There's no point in using the parental controls or setting passwords for obvious reasons, either.
So I had an idea: from what I know, after guessing the password incorrectly 6 times, the device is locked for 1 min, 7 times, 5 min etc. So I was thinking, is it possible to change the settings, for example, to lock the phone for 60min after 3 wrong password attempts? This would be incredibly helpful!!
(if you know a way but don't want to post it here, please email me instead!)

Thanks a lot Rob. That works.
"Rob Woollen" <[email protected]> wrote in message
news:3f29b665$[email protected]..
java -Djava.io.tmpdir=<tmpdir path> weblogic.appc
-- Rob
Bernhard Lenz wrote:
I realized that weblogic.appc creates a working directory
/var/tmp/appcgen
when compiling ejbs. What happens if 2 developers run weblogic.appc atthe
same time? Will they be using the same temp directory and therefore getin
each others way? I'd rather like to create a temp directory which isunique
for the machine. Our build scripts would be able to create such adirectory
but I couldn't find anything in appc to set the temp directory.
Do you have any advice?
Thanks for your help.
Greetings
Bernie

Maintain a common email list at one place for all the process chains

Hello BW Gurus,
I have built a process chain and listed the email ids and pager numbers to be notified should an error occur.
But I need to provide the same list for other process chains( around 15) and to avoid me adding the same id's and pager numbers in all the process chains....is there a table/group that I can maintain and use that group in all the process chains?
Thanks in advance,
-madhuri

hi Madhuri,
welcome to SDN ...
try to maintain/change the distribution list by clicking on the search option for a name, then searching for the required distribution list. double click it and in next screen(display mode), switch to edit mode and add/remove the recipents there.
hope this helps.

Wait time for 5 min in process chain

Similar Messages

Maybe you are looking for