Walk me thru replacing my good HD to Samsung EVO-840 500GB SSD

Please walk me thru replacing my good HD to Samsung EVO-840 500GB SSD. I need Help. I did back up to Time Machime. I do have a HD USB enclosure. Some level 6 and 7 reps are suggesting purchasing cloneing software to do the job. Please advise the best route for me. I also want to upgrade my memory at the same time. Much thanks.

Mustang69conv wrote:
...How and when do I transfer/install everything from my good old HD to my new SSD? What program do I use? How do I do it?...
Since you aren't upgrading your OS and you're not starting over with a new computer, your old HD is already fully compatible with what you want on your new SSD. So, with your HD installed in your external USB enclosure, boot from it (hold down the option key after the chime and pick the external drive), then clone the external onto the SSD after you partition the SSD to GUID Partition Table (click the Options..Button), one partition. Carbon Copy Cloner does the job for making a bootable clone; other software, such as Superduper does too. Assuming the SSD is big enough to receive the contents of the HD with room to spare, you're done.
Obviously it's also possible to do a fresh install of the OS you're already running and then use Setup Assistant to migrate your settings and files to the SSD. I've found, however, that some settings, such as Network configurations, can get lost that way, as can authorizations for software you've had to buy and register.

Similar Messages

I'm getting my "new iPad" on Friday. I'm replacing my original iPad (iPad 1). Since I will not be going to the Apple store to get my iPad, can someone walk me thru what I should do to set up my new iPad on Friday? I want to transfer my iPad 1 apps etc.

I'm getting my "new" iPad on Friday. I'm replacing my "original" iPad (1). Since I preordered and will be receiving my iPad directly I will not be picking it up from the Apple store, so no set up from them. Can someone walk me thru what I must to do get my new iPad up and running. I want to transfer my info, apps, etc. to my new iPad but I also want to pass on my old one to a family member who uses the same computer. How shall I proceed? Thanks!

If you want everything that's on your current iPad onto the new one, then you can first copy all purchases off the iPad to your computer's iTunes via File > Transfer Purchases. You can then backup your current iPad and restore the new iPad from that backup (a list of what is included in a backup is in this article - it excludes music, videos, synced photos). As the backup doesn't contain the actual apps, just their settings and content, for the restore to work completely you'll need all the relevant apps in your computer's iTunes library - otherwise the restore won't be able to install the apps and therefore their content (which is one reason to do File > Transfer Purchases, if that doesn't copy them over then you can re-download them for free : http://support.apple.com/kb/HT2519).
The restore won't copy passwords onto a different device, so you will need to re-enter your email, router, and any website passwords onto the new iPad.
Depending on what you want to remain on the iPad, you can then either leave it as it is or log out of your account on it (tap on it in Settings > Store) and then wipe it via Settings > General > Reset > Erase All Content And Settings.

I AM HAVING TROUBLE RESTORING MY REPLACEMENT APPLE 2 I-PAD, COULD YOU WALK ME THRU IT/

can u walk me thru to access my replacement i pad2

Read http://support.apple.com/kb/ht1766

Cost of Replacing Defective goods.

Hi SAP gurus,
I am a frehser & given a task on to replacing defective goods if returned with in 6 months will be replaced with the free. as well as Billing for replacement print the bill.
Can any please help me with detail configuration & what reports to be maintain.
Point will be rewarded.
Many thanks.
Regards
Rahul Chitte.

HI,
You can tackle this with normal sales scenario. Develop resturn sales document. Do copy control setting for the same.
Now, develop new PP for the return document.In that PP for the basic price develop routine with the help of abaper. The logic should be that it should compare billing date with your return sales order creation date or system date. If the diff.is more than six months then baisc price should be zero.
For invoice print manintain all setting and records in NACE.
Reward if useful
Thanks,
Pramod

SD Doc type SDF:Replace Defective goods

Dear Gurus,
Kindly provide a solution for this scenario
Replace defective goods if returned within 6 months
My client replaces defective goods free of cost if it is brought back within 6 months of the invoice date.
Please Please Suggest .............
Thanks in advance.
.........Satya

Hi
First, you have to create a "Return order (RE)"in t.code VA01, specify an "Order reason" and save it.
Return order can be created either with reference to the Sales order or Billing document.
It can also be created without any reference also.
If you want to replace with fresh goods, then create an order "Subsequent Delivery free-of-chrge (SDF) with reference to the "Return order (RE)", just created.
SDF contains a Delivery block. Remove the block in VA02 and create a Delivery from this SDF, but Billing is not relevant for it (check billing relevance field in Item category KLN/KLX).
Remember, SDF is always created with reference to the Return order(RE) .
SDF can be created before the Return Delivery as well as after the Return Delivery is created.

To replace defective goods free of cost if it is brought back

Hi all
can any one suggest me how to go about this scenario
how to replace defective goods free of cost if it is brought back within 6 months of the invoice date.
what is the process
thanks in advance
sri

Hi,
To replace defective goods a return process with a free of charge SO and delivery must be in place.
Process:
1. Create a returns sales order w.r.t the billing document of the defective goods
2. Create a returns delivery and do the PGR
3. Create a Sales Order (new order type or OR can be used) with the replacement qty, please note that the pricing here should be zero.
4. Do the delivery for this order and PGI.
5. Please note that billing is not required as we giving the goods free of charge.
In order to do the above process all the configurations should be in place. The returns SO item category should not be relevant for billing, similarly the subsequent SO item category should not be relevant for billing.
Hope this helps.
Regards,
Vinu

I have a pre-existing photoshop created image. I am new at a job and I'm trying to change it. Can someone walk me thru this? maybe via email or messenger? thanks

I have a new job and I have to use Photoshop for the first time. I have spent some time practicing and have figure a little out. I have a created job that I need to alter, both text and color. I can't figure out how to do any of this. Can someone please walk me thru this either in email or messenger. Thank you.

Can you upload a screenshot that shows the layer panel as well as the image?

PO return Order with replacing of goods

Hi
For not compliant goods, usually we create a PO Return Order by flagging the check-box "Return" and the check-box "Free of charge" if we ask to vendor to replace the goods.
Later we send the goods to the Vendor with MIGO and 161 movement-type.
Some days later the Vendor send to us new Goods, and we need to post it on our stock. Logically we think to post a "Return delivery" for the previous Original material documents, but teh system issue an error and do not permit to post the document.
How is the right operation to do to close the process ???
Thank-you for cooperation.
Claudio

hi,
i think u follow this -
step1) Create one PO with two line items first for return item(both tick of FOC and Return)
second one for procurement(normal with again FOC tick if reuired)
step2) when u need to send material out to vendor do GRN for first line item i.e 161.
step3) when u receive relacement then do normal GRN for second line item i.e 101.
this will give u a perfect tracking also .
any time u can find how much pending to send to vendor or how much yet to replace from vendor.
regards,
sujit

Please walk me thru creating a playlist in iTunes for internet radio stations

Please walk me thru creating a playlist in itunes specifically for internet radio. The itunes help page is not detail enough.

Create a new playlist
Open iTunes
Click the + button in the lower left corner of the window.
Name your playlist
Add radio stations:
On the left side of the iTunes window, at the top is the "Library" group. Under "Library" should be an item called "Radio." Click that to open the radio listings. If you do not see "Radio" in iTunes, go to the menu bar at the top of your screen and open iTunes > Preferences. In the preferences window, under the General tab, make sure Show > Radio is checked and click OK.
Find a station in the Radio listing.
Drag that station from the listing on the right side of the window to the new playlist you created on the left side, and drop.
You now have a playlist with a streaming radio station in it.
To add stations not listed in the iTunes radio listings:
Locate the stream URL (if you need further help, post which radio station you want exactly)
Copy the URL to your clipboard (command+C)
open iTunes
In the menu bar at the top of your screen, click on Advnaced > Open Stream...
Paste the URL (command+V)
Click OK
Your new radio stream should now appear in a playlist called "Internet Songs." Open that playlist.
Drag the station from the Internet Songs playlist into your own playlist.

For a book cover in Elements 9 I can't exchange the jpg for another. Can someone walk me thru it?

At the upper rt. and wrapping around the book cover is a jpg. I want to exchange it for another, but can't. I've tried deleting the photo and then importing another. That won't work. Tried opening another layer, but that doesn't work either. Do I open a layer and then import? Whatever I do the jpg pastes onto the entire BACKground of the cover/canvas! Can someone walk me thru this?! Is the problem that I need to be in a certain format from the left column of icons?!
Thank you!
[email protected]
Kristen

Kristen
From the nature of your question, it appears that you have posted in the wrong forum. This looks like a Photoshop Elements 9 (photo editing) question that you have posted in the Premiere Elements Forum (video editing).
If this is as I suspect, please repost your question in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move your thread from here to there. It might be quicker for you to repost your question in the Adobe Photoshop Elements Forum.
Photoshop Elements
ATR

I've downloaded the free pixel bender plugin for my mac (it says toolkit) for cs5 but I don't know how to put it in my filter list, can someone walk me thru it please?

I've downloaded the free pixel bender plugin for my mac (it says toolkit) for cs5 but I don't know how to put it in my filter list, can someone walk me thru it please?

Copy it in the respective plug-in folder.
Mylenium

HT4972 Can you walk me thru the steps to update my Ipad 1?

Can you walk me thru the steps to update my Ipad 1?

Please note, the iPad 1 can not be upgraded beyond 5.1.1.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Can someone walk me thru the procedure for removing a wifi profile - Thank you in advance for your help

I have a T-Moble hot spot - new - it connects to my ipad but does not connect to the internet for my gps use - it even will disconnect from my ipad often - the t-moble guy said I need to remove the wifi profile from my ipad and then restart my hot spot - would someone help a novice --walk me thru how to remove the wifi profile - thank you in advance!!! Steve

Here are two suggestions:
1. Go to Settings > WiFi. Then for each white arrow you find inside a blue circle on the right, click it, and then click "Forget this network" on top. Repeat for all occurrences of arrows in circles.
2. Go to Settings > General > Reset > Reset Network Settings and press that button.

Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
Thanks

I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

G62-234DX Hard drive dead. I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD. Error message appeared after windows loads files and starts windows from the recovery DVD. An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs. You will not be able to continue to recover this system with these discs. error: 0100-1425 -3627-3628-3623-3624. Hit OK and system powers down.

Hi:
If you purchased the recovery disks from HP, please see if making and running this first helps.
"CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

Walk me thru replacing my good HD to Samsung EVO-840 500GB SSD

Similar Messages

Maybe you are looking for