Want to check the redundancy of master data in the system

Hi,
I want to get rid of all redundant customers/materials/vendors in my SAP system.Any suggestions as to how I can check if a specific customer / vendor is being used currently by the business or not?
Edited by: Christino Ronaldo on Sep 27, 2010 8:24 AM

Hi,
I think one of the ways of doing it is to check if the orders (sales or purchase orders) are created for the each of the customer (or vendor) for last couple of years and then deciding with the FI team before getting rid of them.
For checking if the sales orders for each customer you can use table VBAK
For checking if the Purchase orders are created for each customer, you can use table EKKO.
You can also use transaction VA05N for checking if any sales order is created for a customer for a specified duration in case you are using ECC 6.0. Else, you can try with VA05. VA05 transaction will give you an idea about the customer and material for a specified duration and for a specific sales area.
Hope this helps
Thanks
Mukund S

Similar Messages

  • How to check the records in Master Data Table?

    Hi,
       I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
    I done the following way:
    Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
    But it's not showing the records.It's asking like CID from......To......
                                                                        CID(SID)from.............To.......
                                                                         here CID means customer id(characteristic).
    and showing some settings.
    Please guide me.
    Thanks & Regards

    Hi Sri,
    Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated  data in to master data info object.
    regards
    sap

  • Want to delete 0BPARTNER and 0PRODUCT master data

    Dear friends / Experts
    i want to delete the whole master data which is availabe in 0BPARTNER and 0PRODUCT  ,  while deleting the master data using right click and deleting --> am getting the message like some of the master data can not be deleted but using se11 i came to know that still 3 million records are available in database.
    so am kindly requesting you to help me out to delete those master data ..
    even i have tried using 'RSDMD_DEL_MASTER_DATA'  functional module too.
    but same result i got i.e. some master data can not be deleted.
    please help me friends....
    thanks in advance...
    regrds
    anand

    Hi,
    As mentioned earlier, you need to delete all the transaction data wherever this master data is being used. One option is to use to the where used list from the master data and the other and more effective way to do the same is to first right click and delete the master data, it will give u a message that all the master data cannot be deleted. After that goto t-code SLG1 and check the log for deletion, it will tell u the exact objects where this master data is being used and then you can go ahead and delete the same.
    You can also use t-code SE14 to delete the data but keep it as the last option.
    Regards,
    Arminder singh

  • DTP to load master data, gives the message 'No more data available'.

    hi,
    when i execute the DTP to load master data from DSO, it executes and gives the message 'No more data available'. The request is green but no data is transferred from the DSO to master data.
    I want the DSO data to get into master data how do i do it?

    Hi Hardik,
    Since the request is green, there is no error in extraction. But, as they've rightly pointed out, the Update mode of the DTP must be Delta and there must not be any new Master data that you are looking for.
    Compare the data and check if the Delta DTP should bring anything at all i.e. new records. If there are no new records, then the Delta DTP will not bring any more data. Else, change mode to Full and check again.
    Reg,
    Dhaval

  • Need to find out the number of Master data records transfered to the BW

    Hi,
    We need to find out the number of Master data (example -0MAT_PLANT_ATTR) records to be transfered to BW side. This is a delta extract.  We are preparing test scripts to check the master data extract ( full & delta) from ECC6 TO BI 7.0..
    Advance Thanks.

    Hi,
    Goto RSA3 and run that master data extractor in D mode if you want to know the number of records in delta and in F mode if you want to know the Full volume. But make sure that you set data records/calls and the display extr calls numbers so that you get the total number of records.
    The other option is goto the master data source table and look at the number of records in that table. That'll give you an idea of the total number of records in the table.
    One other option is to goto RSA7 , select the delta datasource and hit the display button. You'll get to know the number of entries in the delta queue that way as well.
    Cheers,
    Kedar

  • How to make the Deprtmnt field in the cost center master data as required ?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Eli,
    Thanks for the quick reply
    while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in  create mode itself.
    thanks
    regards
    Suresh

  • PA30, attaching documents through the employee personal master dat

    Dear freinds,
    We are attaching documents through the employee personal master data
    PA30, Our client wants to know where exactly these attachments are
    getting saved; Our SAP environment is ECC6.0 on AIX 5.3. so i exactly would like to know what is the exact path where these documents are getting saved on AIX machine.
    I would appreciate if you can tell us where exactly these documents are
    getting saved at OS level, any particular file system you think,
    because I probed in but couldnu2019t find where exactly there are on the
    OS..
    Regards
    ayush

    hello,
    SAP generally recommends that you store employee documents with a bar code. You can find the documentation to 'Storage Within Personnel Administration' using the following path:
    => Help => SAP Library => Human Resources => Personnel Management (PA)=> Personnel Administration (PA-PA) => Storage Within Personnel Administration (PA-PA)
    In the SAP Standard it is not possible to tie original documents to specific personnel numbers in the PA30 transaction. The only exceptions are two specific scenarios where you can tie original documents in the PA30 transaction:
    1. late storing with bar code
    2. late storing without bar code
    During both scenarios you start out in the Trx PA30. If the bar code entry is deactivated the actual key data will have to be transferred to the document in any case, otherwise you will be asked to enter a barcode again. Therefore the document would be transferred to the scanning location and then assigned to a specific business object.
    Unfortunately it is NOT possible to upload a document directly into archive in the PA30 any other way.
    Let me emphasize once more that PA30 can not be used for storing infotype specific documents. Via the special scenarios mentioned already by my colleague you are able to assign documents to the specific infotypes but the storing has to be completed outside of PA30.
    Using the option Extras -> Assign facsimile in PA30 will be interpreted by the system as start for late scanning with barcode thus the error message.
    Hope this help
    Sarah

  • Master data on the fly - How to guide - Error

    Dear experts,
    I am trying to implement the solution for creating master data on the fly in a data manager package as proposed in the how to guide for BPC 7.5 (http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f08895ab-f152-2e10-7d8b-950a8e5eba0c). We are on 7.5 NW SP 09 and apparently the included solution is not working properly.
    The installation as explained in the how-to-guide was successful and all the files could be transported into the system. Furthermore I created the package as indicated.
    When trying to execute the package and adding a new member in the costcenter dimension (P_CC) the package status is successful. Nevertheless no new masterdata was created.
    I observed that in UJFS a new file gets created for P_CC.xml with the new dimension-members but the corresponding xlt and xls files are missing. After processing the dimension in BPC Admin the old structure returns along with the xls and xlt files.
    It seems as if the delivered BADi (ZUJ_IMP_DM_MDOF) is not working properly. Did anyone try implement the proposed the solution already and what was your experience? Did some of you already experience a similair issue?
    Thank you and best regards
    Felix

    Hi Felix / Carlton,
    Master data on fly is mainly based on retrieving / updating XML file of the respective dimension.
    SAP BPC 7.5 with SP greater than 08 will not support.
    Kindly check the note 1696602..N
    Hope this will be helpful.
    KR
    Gokul

  • What is the Sequence of Master data and Transaction data R/3 to APO

    Hi guys,
    What is the Sequence of Master data and Transaction data R/3 to APO  through CIF?

    Hi,
    Master data,
    Material Indipendent data can be sent without any dependency.
    Material Dependent data sequence is as follow.
    Plant,
    MRP areas,
    Supply area,
    Material,
    MRP area material,
    planning material,
    ATP check,
    Purchase info recards,
    schedule agg,
    PPM or PDS (But before PPM or PDS  work center should send to apo) If PDS is sending then BOM should send before PDS.
    Transaction data.
    As per the business requirement what is planning in apo.
    Regards,
    Kishore Reddy.

  • Regarding chossing the Business Partner Master Data

    Dear All,
                 I have one query regarding chossing the Business Partner Master Data. Let take an exapmle 
    suppose 2 sales person are making the sales Quotation and every sales Persons only making the quotaion
    for the specified leads or customers.Suppose Sales Person 'A' makes the quotaiton for 5 Leads and Sales
    Person 'B' makes the quotation for the different 5 persons.Now i want when  i Login into sales person 'A' Login
    and choose the Business Partner by pressing tab in sales quotation window , then that Sales Person 'A' can
    see only the Specified BP list which are belonging to his region.
    Thanks All.

    The access to Item Master and BP Master cannot be restricted to Users through Authorization. This is a known limitation of SBO.
    You can try this by using SDK.
    You can use Data Ownership Authorization, which means the marketing documents created by Sales Person 'A' will not be viewed by Sales Person 'B'
    Refer this thread for details
    [Customer master restriction in Marketing document.........;

  • Sync the FS Item (CX 13)  Master data in QA systems

    I have requirement like this, Synchronize all new FS Items (T-Code CX13) from production to the QA and Development environments, on average there are approximately 20 new FS Items set up in a month. ( this is the reson to do this: The weekly job to update the FI GL master data from production to Dev and QA environments, does not include the ECCS FS Item master data. This causes failed testing for projects, enhancements. At this time ASSAP team manually enters the FS Item in QA environments. This is very disruptive and time consuming and causes delays in testing. )
    Can you please suggest me the best way to do this.
    Thanks
    Frank

    Hi,
    Any master data changes to a "non modifiable" client can be sent using one of the two options :
    1. Transport Request
    2. ALE (IDoc)
    Most probably the master data change he wants to transport requires an ALE setup between the two systems.
    Regards,
    Jovito

  • Fm to create, modify delimit the records in master data for org mag

    hi,
        There is a fm hr_infotype_operation to create, modify, delimit the records for one infotype of pernrs.
    Like this I want fm through which i can create, modify the records to master data of organisational management (OM). Whatever the infotype i will enter in that fm and data it will create a new record in OM master data. 
              If anybody know this, please tell me.
    thanks & regards,
        Sekhar.

    Hi,
    Try RH_UPDATE_INFTY.
    RH_INSERT_INFTY.
    RH_DELETE_INFTY.
    Regards,
    Dilek

  • Master data on the fly in BPC 7.5

    Hi All,
    We  need to use the Master data on the fly functionality. We have already gone through the SDN document to confirgure it but while importing the objects mentioned in the document TR we face below problem.
    "However, after checking the components of this TR, it is observed that this TR is for BPC 7.5, SP 06 and our BPC system is on SP08"
    Also, it refers to  two components ANAXSA, OPMFND which would not be installed as part of BPC installation.
    The document does not provide any information on the support pack level or the additional components.
    If anyone has already used this functionality in BPC 7.5 NW version, then please do let me know whether there are any issues associated with this BPC version in implementing this functionality.
    Thanks and Regards,
    Umesh Jethwani.

    Hi Chanaveer,
    UJD_ADMIN_RUN_OPTIMIZE can be used only for executing the FULL & LITE OPTIMIZER packages.
    Looking at the code of UJD_RUN_OPTIMIZE_PACKAGE it seems this FM can be used to trigger process chain from BW.
    Please refer below link on SDN showing how to load Master Data on FLY in SAP BPC 10.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2020b522-cdb9-2e10-a1b1-873309454fce?QuickLink=index&overridelayout=true
    Thanks,
    Rohit

  • Regarding the Time dependent master data error

    Hi Masters,
            I've loaded the time dependent master data from flat file only two fields. When I checked that corresponding characteristics in maintain master data, that contains by default from date 01.01.2007and to date 31.12.9999 this date also. Could you please help me to rectify this error.
    Thanks in advance
    Raja.S

    Hi Antonino La Vela
          I have 2 Project Manger and in different duration for different project.
    Following datas are my data in Excel sheet.
    PM Name                    To date             From Date           Costcenter
    Ragunath                    01.09.2007        01.06.2006           Project name1
    Ramana mani              01.02.2008         02.09.2007          Project name2
    while loading above data, I'm getting following data in maintain master data
    PM name                   To Date             From Date           Costcenter
                                     31.12.9999         01.01.1000
    Ragunath                   31.05.2007         01.01.1000
    Ragunath                   01.09.2007         01.06.2007            Project Name1
    Ragunath                   31.12.9999         02.09.2007 
    Ramana mani             01.09.2007          01.01.1000
    Raman mani               01.02.2008          02.09.2007           Project Name2
    Raman mani               31.12.9999           02.02.2008   
    Could you please help me, how this unnecessary datas are loaded by default?
    Thanks in Advance
    Raja.S

  • Master Data on the fly

    Hello team,
    i am want to create a tool kind of thing for master data creation on the fly.
    I got some doc about this but all are specific to a single dimension.
    I wat to create the standard tool which can work for any dimensions.
    I used EPM function to take the environment ,model ,dimension name & dimension property in the excel sheet i am unable to find a way to send these data values to the script of my data manager package.
    Can anyone help me in sending the data from excel sheet to the script of the data manager package?
    Thanks & regards
    Ronit Kumar

    In the How-To document "Master Data on the Fly" the custom process chain was used with REPLACEPARAMx_KEY and REPLACEPARAMx_VALUE
    It's better to use standard chain and pass just 2 variables:
    First variable: DIMNAME
    Second variable: Some string with ID,Description,Properties etc... (some syntax has to be defined)
    Both variables will be processed by badi to create new master data!
    Vadim

Maybe you are looking for

  • Date and Time Stamp Removal?

    Does anyone know how to digitally remove the date and time stamp on the face of the photo once the photos are loaded in Aperture, short of doing re-touch? Working in Aperture 3.

  • How to get my photos off my phone?

    The other night i put my phone on the charger and it was charging fine. When i woke up it only had 13% battery and it wouldn't charge. I used several different charges in all different ports and it still wouldn't work and still wont. I know it's not

  • Updated version of iTunes won't open HELP!

    After updating my version of iTunes to the most current version it now will not open. After telling iTunes to "run" the hour glass appears next to the mouse pointer and that is the extent of its attempt to open. The hour glass appears, then disappear

  • Particular Vendor Account assignment in Financial Statement Version

    Hello,         I am preparing Financial Statement Version. There are around 50 vendors and out of that 2 vendors have been paid in advance. I need to show that 2 particular vendors in Financial Statement Version, the problem is there is only one reco

  • Document user status not changed from follow-up document

    Hi gurus! My task is to set new user status of primary document (service order) from follow-up document (task) after follow-up document is created. To do this I've created Badi-impl. of ORDER_SAVE Badi and in PREPARE method when saving newly created