Want to Create a Report Server Kindly Help?

Hello Everyone,
My name is Sarmad and I am a student of BS(Software Engineering) in 5th semester now. I have assigned a project on 'Oracle Report Server'. My instructor requirements are that it should generate 'Matrix Reports' and i have to use Oracle Database 10g XE. I have researched a lot on Internet and found that following tools are necessary to make a report server on Oracle for Win 7 32 Bit OS:
1. Oracle Forms and Reports 11g for Win 7 32 Bit
2. Oracle Web Logic Server 11g (10.3.5) for Win 7 32 Bit
3. Oracle Data Base 10g XE for Win 7 32 Bit
Therefore, I installed Data base first and then i installed Web Logic Server and integrated my Data base's sample DB HR within the 'Data Sources' link present in Web Logic Server's Administration Console. Connection test went successful for Web Logic Server and Database. Then i installed Oracle Forms and Reports for Development mode and it also installed successfully on my system.
Now the issue is that i want to integrate Oracle Reports and Forms services with Oracle Web Logic Server. I don't know how to do that and also i don't have any idea whether i may need any further tools or these are enough to generate reports as i think that there should be some Report Layout builder so that data coming from Web Logic Server should be presented in that layout i.e. Matrix Layout.
Kindly help me out in this and guide me through.
Thanks!

hi
I am not saying wrong about this question but how can you expect some one to give the code..if you any doubt in terms of logic or if u need any clarification on the functionality how the element behave, the people around here would definitely help you out...
But straight forward asking the code i believe you might not get the correct answer sometimes..Narrow down your question so that people around here could help you out if they can
Regards
Ramesh Kumar S

Similar Messages

I want to create a report with more than 64 column's.

I want to create a report with more than 64 column's. I have generated Query the XML.When I tried to create a template for the report.I have Inserted the colum's Wizard and finish it throughing error message. "you cannot create atable with more that 63 coloum's "

Hi ,
Can u Check the below thread
More than 63 columns in rtf template

Creating 10gAS report server cluster

Please guide us to create 10g Report Server Cluster
version 10.1.2.0.2
platform RHEL-4
Regards,
Achyot

Hi ,
There is no need for setting up a common mapped drive as cache. You can specify their own individual cache directories
* Server does duplicated job check in this server first
* If it did not find, sends request to all servers in the cluster
* If a server in the cluster has duplicated job, the job will be sent to that server to fetch the cached output
So there is not need for common mapped cache directory.
I read the note you mentioned. In the common settings required for cluster-members mentioned there, I could not find "cachedir" (If that is why you put a common directory) . Some settings could be different in cluster members.
Thanks
Ratheesh
The statements and opinions expressed here are my own and not that of my employer.

I want the create this report but how to???????????????????????????????

I'm created my oracle10g database with oracle XE databaselink and create view on XE for my customer report. And then create simple report. Everythings ok but when I push the run report report came with all data but I don't want to when push the run button. I want to run and then write customer ID and then push the GO button and then only came to 1 data or info. Can I do this and how???
Help me please, I'm working about this a few days but I can't do anything :(((
This is so important for me, help me please...

Hi,
OK
Assuming you are using Page 1 for the report, do the following:
1 - Create a new HTML Region called "Search" and put this above your report on the page layout
2 - Add a normal Text item called "P1_CUSTOMER_ID" into the new region - this will be where your user enters in the CUSTOMER_ID value that they want the report to filter by
3 - Add a Hidden Item called "P1_DISPLAY" into the new region. Set the Default Value for this item to N. If this is 'Y', the report will be shown - if this is 'N' the report is hidden
4 - Add a button called "P1_SEARCH" into the new region
5 - Add a button called "P1_RESET" into the new region
6 - Update your SQL statement to include a WHERE clause:
SELECT ....
FROM ....
WHERE CUSTOMER_ID = :P1_CUSTOMER_ID
(you may have to do TO_NUMBER(:P1_CUSTOMER_ID) if your CUSTOMER_ID field is numeric)
7 - Add a branch to the page that branches to Page 1 and sets P1_DISPLAY to Y. Set this branch to be run only when the P1_SEARCH button is clicked
8 - Add another branch to the page that branches to Page 1 and sets P1_DISPLAY to N. Ensure that this has a higher sequence number than the first branch
9 - Finally, add a Conditional Display to the report region. Set the Condition Type to "Value of Item in Expression 1 = Expression 2". Enter P1_DISPLAY into Expression 1 and Y into Expression 2
Regards
Andy

I want to create a dulicate server

Dear all,
I have win2012 R2 server. I have 15 user on it. I have terminal server and another database software over there. now the point of security I want to create another server. where all reflection must
be done. please suggest me the way by which if one server failed then the all process/users should have to redirect to another server. what i have do for that? please suggest which kind of server I have to configure.and how to configure it,Thanks in advance

I'd look at virtualizing these roles onto a two host setup. I'd ask them more over here about the hardware / configuration details.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv&filter=alltypes%2Cnoreplies&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Report Server (Please help ! )

Hello!
I have installed infrastructure and AS onsame machine. In startthe default report server (rep_myserver) performe very well but after about 60 reports it went to down. Now when i try to start it from AS Home page it start and immidiatly stoped.
Log files are showing only start and stop time without any other details. Trace files are also empty.
Please help me to solve this problem. Is it a configration problem or i need a patch to solveit.
Thanks
UsmanRana

Hi UsmanRana,
Make sure your rep_myserver.conf file has the following line in it and that it isn't commented out:
<trace traceOpts="trace_all">
Then restart your report server and look in the "logs" subdirectory for the rep_myserver.trc file. It should show you what happened that caused the report server to shut down.
regards,
Stewart

How to create the Report Server tnsnames entry

Hi
I'm trying to integrate Oracle Forms with Oracle Reports and the document says that I have to know the tnsnames.ora entry for the report server. In other versions it was created automatically but in 11g there is no configuration. How do I configure this?
Regards,
Néstor Boscán

In 11g in the opmn.xml the environment variable TNS_ADMIN is set for the reports servers; in addition to the "normal" location under $ORACLE_HOME/network/admin you have to add a tnsnames.ora in $INSTANCE_HOME/config if memory serves (just take a look in the opmn.xml for the exact location)
cheers

Want to create custom report under report field in OEM 11G

Dear all
I would like to create custom report on OEM 11G. I have query which is executed and verified from TOAD. But after placed report element it shows an error that table/view not exits. But it doesn't ask any database user name and password.So let me like to know how to do this. I want add more and more reports after the success of this.. Ho can it be done?Please advice.
Note:-
The data is getting from OEM repository i think so.. But i need a report which is get data from various apps and system tables. So how to display result from this table and shown to EBS reports.
Regards,
Gobinath.R
Associate consultant
Petrofac Information Services Private Limited
Chennai.
Edited by: Gopinath on May 18, 2012 4:23 AM

Report should be based on tables in repository database. Mostly sysman tables we will be using for reporting. If you need other database tables then you need to create dblink to those targets in sysman schemas. To my knowledge that's the only way you can refer to other db tables in reports.
Regards,
Satheesh Shanmugam

Unable to create a reports server to test web.show_document in Forms 10.1.2

Hi all,
In Forms 10.1.2 DS, I'm trying to use the web.show_document built-in to 'generate' a report from a .jsp file. This JSP file was created by wizard through creating a report object in the Object Navigator. The code I'm using from a push button is as follows:
web.show_document('http://<hostname>:8889/reports/rwservlet?report=<dirpath>\Sales.jsp&userid=<username/password@connectstring&server=<server_name>'
As far as I am aware no 'reports server' has been created so I've tried the following command in a dos window:
rwserver -install <server_name>
but this just raises an 'alert' indicating that I should consult an installation guide to setup and install the server. So my questions are:
(1) Is what I'm trying to do supported in DS?
(2) What installation guide should I consult?
Any information on this would be gratefully appreciated,
Kevin.

Hi Inol,
Thanks for the response. I agree with the comment about exposing user details, I'm just doing a bit of experimenting at the moment! I tried to do what you suggest in terms of changing the URL but whether I reference the server or leave it out, the subsequent browser session seems to hang and then eventually I get a 'Page Not Found' response. On using the URL 'http://127.0.0.1:8889/reports/rwservlet/showenv?', I get an 'Access Denied' Error Page. Is there something additional I need to set up with regards to Reports to get this to work?
regards,
Kevin.

I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Help please

I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Does anyone have the same problem or know how to fix it?

In Lion the Finder folder is now invisible. To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion for the first time or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an applicaiton.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
OT

Want to create a Report from scratch!!!

Hi,
I tried to create a report using the document provided by oracle but in vain. Could anyone give a guideline on how to carry on with this task. Or a link to where I can find an interesting user guide.
Thanks in Advance.

There is also a doc on our pages to get you started building templates ... very simple to get started:
http://www.oracle.com/technology/products/xml-publisher/xmlpclient.html
Look for the XML Publisher Templates by Example
then once you have had some practice ... take it to Apps
http://www.oracle.com/technology/products/xml-publisher/xmlpapps.html
regards
Tim

Wanted to create a report

Hi gurus,
i want to compare data from two tables
if the record in first table and second table is same , show in one color, else show in different color.
any idea, & suggestion to do this ?
Please it is urgent

Ok, here's an example then -
Using the standard EMP table
jes@DBTEST> select * from emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7839 KING PRESIDENT 17-NOV-81 5000 10
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7566 JONES MANAGER 7839 02-APR-81 2975 20
7788 SCOTT ANALYST 7566 09-DEC-82 3000 20
7902 FORD ANALYST 7566 03-DEC-81 3000 20
7369 SMITH CLERK 7902 17-DEC-80 800 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7876 ADAMS CLERK 7788 12-JAN-83 1100 20
7900 JAMES CLERK 7698 03-DEC-81 950 30
7934 MILLER CLERK 7782 23-JAN-82 1300 10
14 rows selected.Create another table as a copy of the EMP table -
jes@DBTEST> create table emp_copy as select * from emp;
Table created.Change one of the rows in the copy
jes@DBTEST> update emp_copy set job = 'CODER' where ename = 'SCOTT';
1 row updated.
jes@DBTEST> commit;
Commit complete.Now run a query against the EMP table, checking for a matching row in the EMP_COPY table
jes@DBTEST> select e.empno,
e.ename,
e.job,
(select count(*) from emp_copy ecopy
where
ecopy.empno = e.empno
and ecopy.ename = e.ename
and ecopy.job = e.job) as match
from emp e;
EMPNO ENAME JOB MATCH
7839 KING PRESIDENT 1
7698 BLAKE MANAGER 1
7782 CLARK MANAGER 1
7566 JONES MANAGER 1
7788 SCOTT ANALYST 0
7902 FORD ANALYST 1
7369 SMITH CLERK 1
7499 ALLEN SALESMAN 1
7521 WARD SALESMAN 1
7654 MARTIN SALESMAN 1
7844 TURNER SALESMAN 1
7876 ADAMS CLERK 1
7900 JAMES CLERK 1
7934 MILLER CLERK 1
14 rows selected.So you can see that the SCOTT row was the only row that there wasn't a matching record in the EMP_COPY table (based on the comparison of the three columns).
Hence you could create your own (row based) report template that had a condition based on the MATCH column which outputs the row in one colour if the value is '1' (i.e a match) and a different colour if the value is '0' (i.e. no match).
You could then do the reverse query for the other region (i.e. comparing EMP_COPY against EMP).
There are other ways of doing this, but since you want to display in two seperate regions, this is an easier way of achieving this. Obviously you will need to adapt the queries if you want the comparison to be based on different (or more) columns than just the three I used.

I want to create a report based on date ranges...

I have surfed the forum and seen all of the responses and can't get anything to work.
This is where I am:
select     OBJECT_ID,
     EVENT_CATEGORY,
     EVENTS_TITLE,
     EVENTS_DATE,
OBJECT_ID "Click Icon For More Info"
     from EVENTS
where     EVENT_CATEGORY = :P3_EVENT_CATEGORY and EVENTS_DATE between to_date(:P3_START_DATE,'DD-MON-RR HH:MI') and to_date(:P3_END_DATE,'DD-MON-RR HH:MI');
When I input actual data for my querry:
select     OBJECT_ID,
     EVENT_CATEGORY,
     EVENTS_TITLE,
     EVENTS_DATE,
OBJECT_ID "Click Icon For More Info"
     from EVENTS
where EVENT_CATEGORY = 'Category 1' and EVENTS_DATE between '04-MAY-06 10:57 AM' and '12-MAY-06 02:27 PM'
It works!
Please help

Either
1. Make sure the page is submitted so that those 2 items (P3_START_DATE and P3_END_DATE) get saved into session state and can be used by the report
or
2. Make sure both the items have the apppropriate Source or Default values defined so that the initial run of the page will display the report properly
or
3. Put a condition on the report region to not display until 1 (or both) of those 2 items have a non-null value.
Hope this helps.

Want to create a "pop-up" newbie help!

I am new to this. My first folio...
I have a graph with a point on it. I want to click on the point and have a pop up appear over the graph and then be able to close it and go back go the graph..
HELP! I've tried a few different options, but nothing is working!
Thank you!

Here's is a technique giving by Bob Bringhust, http://blogs.adobe.com/indesigndocs/2010/12/hot-spot-button-workaround -for-indesign-dig-pubs.html
Laxman

Want to create Ineractive report by using pl/sql block

Hi,
But If have to read different informations for different tables, how can I do ?
For example:
for s in (SELECT srv_sys_name,ddb_dbname
FROM search_master
WHERE ( ddb_dbname like '%'||:p7_ddb_dbname||'%' AND :p7_ddb_dbname IS NOT NULL ))
loop
apex_collection.add_member(p7_col, s.srv_sys_name, s.ddb_dbname );
end loop;
If I have an other table to look to get other informations, i don't know what to do ?
It's my problem for now.
Thanks in advance. Bye.

HTML_DB 1.6 + Apex 4.0 + Hyperion user wrote:
But If have to read different informations for different tables, how can I do ?
For example:
for s in (SELECT srv_sys_name,ddb_dbname
FROM search_master
WHERE ( ddb_dbname like '%'||:p7_ddb_dbname||'%' AND :p7_ddb_dbname IS NOT NULL ))
loop
apex_collection.add_member(p7_col, s.srv_sys_name, s.ddb_dbname );
end loop;If I have an other table to look to get other informations, i don't know what to do ?Generally, perform a join combining the tables.
Additionally, creating collections row-by-row is horribly inefficient. Use the <tt>APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY_B</tt> bulk methods instead.
However in this case the the PL/SQL and collection-based approach is unnecessary. Base the IR on the query (plus joins to whatever other tables are necessary):
select srv_sys_name,ddb_dbname
from search_master
where ddb_dbname like :p7_ddb_dbname_qryand compute hidden item <tt>p7_ddb_dbname_qry</tt> to include the value of <tt>p7_ddb_dbname</tt> and wildcard characters as required.
Finally, note that <tt>LIKE</tt> searches using leading-edge wildcards on large data sets can be inefficient as this eliminates the possibility of using indexes on the searched column.
(Always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.)

Want to Create a Report Server Kindly Help?

Similar Messages

Maybe you are looking for