Want to Create SliderView using JavaFX,like we desingHTML page using JQuery

I want to create a slider view using javafx2.0.3, when we click on left button the images moves left and come from right side. Like we are creating using JQuery in HTML. from left to right. Anyone know, how it is possinle in Javafx 2.0, Please tell me.
Edited by: 924666 on Mar 31, 2012 3:50 PM

Thank you sir for your valuable time.
But will try which you told. But what i want. In Center view need to display 4 images, and in right side have 1 button. when we click on right button, the 4 images moves right side, and next 4 images comes from left side in the center view.
Can you explain me , how it is possible? Please

Similar Messages

If I want to create a Group that is Group by page,Is that feasible?

Hi, Expert
I want to limit record number(50 records) per page,
and it will have a total column which is amount Salary,
so now I had set some formulas into report
First(in report Details)
WhilePrintingRecords;
Global   numbervar   DataCount   :=   DataCount   +   1;
ps.This variable counts record number and limits record within 50 records per page
   when record passover 50, it will re-set variable to 0(this formulas set in Group Footer)
second(in Group Footer)
WhilePrintingRecords;
   Global numbervar DataCount := 0;
ps.for re-set variable
third(New Page After)
Truncate ({@DataCount}/50)*50={@DataCount} and OnLastRecord=false
ps.For Next page
Fourth
WhilePrintingRecords;
Global numbervar pagetol;
   salarytol:=salarytol +{table;1.amount}
Fifth
Global numbervar pagetol;
if (Truncate ({@DataCount}/50)*50)={@DataCount} then
   pagetol:=0;
If I want to create a Group that is Group by page(50 records per page), because I want
to grand total of salary per page,Is that feasible?
How to achieve this goal??
Thanks & Regards

Thanks lanWaterMan
Actually, my care is Report View,
my report will have Three Summary columns,
one is for 50 records,
second is for data type,
another is for all of records.
I will put the First Summary column behind(below) the last records
So it will look like "Grand total"(for 50 records 1 total).
And the Second Summary column will lay on Group footer(sum data group by data type).
And the last Summary column will lay on every page's bottom(sum all of data).
If I put first summary column in page footer, It will lay on bottom of page, not behind the last records(per fiftieth record).
So I think if I create group1 for 50 records(put in first Summary column on group1 footer) and group2 for data type(put in second Summary column on group2 footer),
then put the last summary column into page footer. Maybe, it will look like what i want.
Thanks & Regards

I have a iPhone, and iPad. I just got a iPod. I want to create a new account for the iPod and use the same credit card information. Is this possible?

I have an iPhone, and IPad. I just got a iPod. I want to create a new apple ID for the iPod so I can access face time and messages separately. However can I use the same credit card account?

Just do it. You can use the same credit card for multiple accounts.

I want to create report on Sybase which provider I should use.

I want to create report on Sybase which is good provider that I should use. I don't want to use the DSN.

CR no longer has a native Sybase driver. Your only option is to u se ODBC or possibly a JDBC driver if they have one or their client supports one. Look on Sybases site for options.

Using JavaFX on secure (SSL) pages

On IE, when displaying a JavaFX applet on a secure page, a dialog is displayed warning the user: "This page contains both secure and nonsecure items. Do you want to display the nonsecure items?" At least some of the remote resources required for JavaFX can only be accessed using http rather than https (e.g. "http://dl.javafx.com/1.2/dtfx.js".) So long as it's required that JavaFX deployment use these remote sites, please make sure that they're all available via both http and https.
That said, is there a way to configure the jnlps (that in turn reference other jnlps) to reference their resources using either http or https, perhaps based on the protocol used to reference them in the first place?

Do you still see the https: protocol on the location bar?
If that is the case then that means that there is content on that page that comes via an insecure http: link.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to import html5 animation (created/published using flash) into a web page using Dreamweaver.

I have created an animation in Flash and published it as a html5 animation.
How do I get this into an exisitng web page using Dreamweaver?

Hi Nancy,
I am using Flash CC2014 which publishing as html.
(When I publish as html with edge animate you can create an oam file which allow the inserting of the resulktant animation into a web page)
The files produced with Flash CC 2014 are: html try.html and html.try
I was hoping I could use some way to just insert the html animation produced by Flash.
Source Code in html file is ....
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>html try</title>
<script src="http://code.createjs.com/easeljs-0.7.1.min.js"></script>
<script src="http://code.createjs.com/tweenjs-0.5.1.min.js"></script>
<script src="http://code.createjs.com/movieclip-0.7.1.min.js"></script>
<script src="html try.js"></script>
<script>
var canvas, stage, exportRoot;
function init() {
canvas = document.getElementById("canvas");
exportRoot = new lib.htmltry();
stage = new createjs.Stage(canvas);
stage.addChild(exportRoot);
stage.update();
stage.enableMouseOver();
createjs.Ticker.setFPS(lib.properties.fps);
createjs.Ticker.addEventListener("tick", stage);
</script>
</head>
<body onload="init();" style="background-color:#D4D4D4">
<canvas id="canvas" width="550" height="400" style="background-color:#99CCFF"></canvas>
</body>
</html>
Tony

I want to set up firefox with 2 seperate home pages, using google with 2 different email addresses

I use igoogle, and I have 2 separete email addresses which I use for seperate reasons, as I will be setting up a web page using one of them. As to this I wondered if there was a way to set up having 2 shortcuts or 2 downloads of firefox with each one having a different homepage, but still using igoogle.
Do I need to download another copy of firefox and while setting it up, set it up with the different email address? Or is there another way of doing this? Or is it something that cannot be done?

I use igoogle, and I have 2 separete email addresses which I use for seperate reasons, as I will be setting up a web page using one of them. As to this I wondered if there was a way to set up having 2 shortcuts or 2 downloads of firefox with each one having a different homepage, but still using igoogle.
Do I need to download another copy of firefox and while setting it up, set it up with the different email address? Or is there another way of doing this? Or is it something that cannot be done?

Creating a tree structure like Windows file explorer using Jdev

Hi All,
Is it possible to develop a tree structure like windows in JDEV and then same page I want to move to oracle apps.
This tree I am creating for Showing Employee information. Like Parents & childs under it. i.e. Managers and employee reporting to managers.
Please let me know if it is possible, if yes how , what is method of doing this.
Thanks
Ganesh Mane

Yes. This possible with ADF Faces RC, which provides an af:tree component. Have a look at the Fusion Order Demo, which uses the tree to implement a similar usecase to the one you describe.
http://www.oracle.com/technology/products/jdev/samples/fod/index.html
Regards,
RiC

I wanted to create two partitions on my iMac w/ Lion using a Recovery USB i created using Lion Recovery Disk Assistant but I keep getting Partition failed message saying "couldn't unmount disk"

I have this recently purchased iMac that comes with a Lion but I wanted to have two partitions on the hard disk. I know that the Recovery HD partition is on the same hard disk so I downloaded the Lion Recovery Disk Assistant and created a Recovery disk using a USB. I boot up the system using the USB Recovery disk and run Disk Utility to create 2 Partitions on the hard disk but I get a Failed partition message saying "couldn't unmount disk". What could be the problem here?

admench wrote:
Thanks for your continued help Tony. Do you mean normal boot into the regular operating system setting i.e. no keys held down in bootup? I think I have tried this, with the same result.
Yes, that's what I meant. If that doesn't work, verify that you have a G.U.I.D. partition scheme (you probably do):

I want to create a document in Illustrator that i can use for Print and Web - using 2 different colourspaces.

Is it possible to do this? I need to create a document so that I can export as a high quality CMYK for print and export the same file as RGB jpeg / pdf for web and email use. Do I have to create the document with 2 different colourspaces, or can I change / convert the colourspace after I have created and finished the document? or is there some simple way to select an RGB / CMYK option when saving/exporting?
look forward to your reply!
Tom

Tom,
In addition to what Monika said, the document can be either CMYK or RGB Colr Mode, but not both.
And you are right in starting with the CMYK because that will ensure (to the degree possible) that the CMYK and RGB versions match in colour (gamut, the CMYK gamut being the more linited and almost entirely included in the RGB gamut); this will prevent more vivid RGB colours which will make the CMYK colours seem duller.

Using 'Fb like' buttons for page content

I want to add a 'Fb like' button to individual photos in my site. I have a like button that links to my Fb page and 'likes' that, but what I would really like is for photos to appear in their activity instead of just the page address.
I tried adding an anchor and entering the page address with the anchor, but the button won't generate. Any ideas?

Hi,
Yes Weblogic controls the users/groups, but it can delegate this to, for example, an LDAP, active directory etc.
Take a loot at JHeadStart if you want to store user / group access in the database.
Depending on how much you can to restrict with security, you can make fields read only or not rendered at all based on the user roles.
When using JHeadStart it provides a map with user roles to access in EL.
If you write the code yourself, which is rather trivial, you can use:
acesContext.getCurrentInstance().getExternalContext().isUserInRole("role name");And just expose this as a bean on the session.
Or just create a map implementation which does the same, but thats a bit more code.
-Anton

Want to show UIX Media Model link in new page using jdev1012

Hi, I hope you can help me.
I have a read only table in uix page
there's a Column of type ORDDOC
here is my code for this column:
<column>
<columnHeader>
<styledText text="${bindings.Doc.label}" styleClass="DefaultFont"/>
</columnHeader>
<contents>
<media
model="${ctrl:createMediaModel(uix.current.Doc,'AppModulLocal')}"
shortDesc="${uix.current.DocName == null ? 'Doc' : uix.current.DocName}"
styleClass="DefaultFont"/>
</contents>
</column>
So it works all fine, i get a link to this file, but if I click on this link it shows this file in the same window as my application.
And i want to get this link open in a new Window. Just like i could make it with link-tag (targetFrame property) and so I'm trying to find a solution to get the medie link in new page.
So, is there a possibility to geht this media link in new window ?
I hope somebody know this problem and can help me.
Thanks a lot
Sebastian
Message was edited by:
Sebastian_ME
Message was edited by:
Sebastian_ME

Hi, I hope you can help me.
I have a read only table in uix page
there's a Column of type ORDDOC
here is my code for this column:
<column>
<columnHeader>
<styledText text="${bindings.Doc.label}" styleClass="DefaultFont"/>
</columnHeader>
<contents>
<media
model="${ctrl:createMediaModel(uix.current.Doc,'AppModulLocal')}"
shortDesc="${uix.current.DocName == null ? 'Doc' : uix.current.DocName}"
styleClass="DefaultFont"/>
</contents>
</column>
So it works all fine, i get a link to this file, but if I click on this link it shows this file in the same window as my application.
And i want to get this link open in a new Window. Just like i could make it with link-tag (targetFrame property) and so I'm trying to find a solution to get the medie link in new page.
So, is there a possibility to geht this media link in new window ?
I hope somebody know this problem and can help me.
Thanks a lot
Sebastian
Message was edited by:
Sebastian_ME
Message was edited by:
Sebastian_ME

I have an iPhone 4 with ios7, but I'm not using it like a phone, just using it like an ipod. Everytime I try to connect my iPhone it said that "iTunes cannot connect to this iPhone. An unknown error occurred. (0xE8000084)." What should I do?

Please help

you cannot update this software because you have not owned the major version of this software
Shouldn't give away the secret of how easy it is.....

How to use attachemnt fucntion in JSP page using Attachemnt functionality ?

Hi all
I would want to know is any body worked attachement functionality to add attachements in sshr functions.I would want to add one attchement to my SIT which i created in core HR .But i need to add attachements in SSHR for these SIT.Would appreciate if anybody can throw some light on these area.Your suggestions are greatly appreciated.
Cheers
Kumar

Hi Kumar
I don't think that the attahcment functionality in SSHR links in with the attachment functionality in core! The SSHR attachments are attached to the workflow records and are usually to give the approver some more information to help the approval process.
SSHR attachments usually get set in the review page, and this may not always equate to a single form in core.
So, I don't think you will be able to do what you are trying to do.
Regards
Tim

Using cfselect onBlur to reload page using a Flash form

I am having trouble trying to get <cfselect onBlur=""> to work inside of a <cfform format="flash"> using Flash. As soon as I put any value into the quotation marks, the Flash form no longer displays.

The current code I have using your syntax is the following:
<cfset thisPage = "http://#cgi.server_name#">
<cfif len(trim(cgi.server_port))>
<cfset thisPage ="#thisPage#:#cgi.server_port##cgi.script_name#?#cgi.query_string#">
<cfelse>
<cfset thispage ="#thisPage##cgi.script_name#?#cgi.query_string#">
</cfif>
<cfform name="fQuiz" preloader="false" format="flash" height="750" preservedata="yes">
<cfselect query="qDescriptionsByInteraction" name="description" id="s3" display="MEDIABITNAME" value="MEDIABITID" width="200" label="Description (video):" onChange="getURL('#thispage#')"></cfselect>
</cfform>

Want to Create SliderView using JavaFX,like we desingHTML page using JQuery

Similar Messages

Maybe you are looking for