Want to design a "clean" pop up window

I would like to create a pop up window that is basically a music player. I want this because I would like people to be able to turn on the music and listen continuously as they browse the site (it's a local music site).
I created a separate html file for the pop up and added a behavior and set the size. Here is what I get:
It's pretty ugly. What I would like is:
1) player should open in the left corner of the page
2) No url bar
I'm not opposed to doing it another way - any suggestions?
Thanks,
Gary

Sorry, but you can't remove browser default address bars from traditional pop-up windows. They're ever present to protect your site visitors from interacting with unknown sites/pages.
For clean pop-ups, use a modal window like floatbox: http://randomous.com/floatbox/demo
The only downside here is that your site visitors cannot interact with pages while the modal window is in focus.
In terms of copyright, you need WRITTEN permission from the recording artists / composers before you post their songs on your site. This is to protect you and the site owner from costly litigation later.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

I need help with deactivation.
I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Help wanted in designing a MPLS POP

Hello,
I have made a basic MPLS POP design and would really be thankful if anyone in the forum can help me to "vet" and improve it further and give critical comments.
The POP design is based on VNO model (Virtual Network Operator)
NetPros willing to extend help can contact me on [email protected] or [email protected]
Thanks in advance.
Cheers,
~Sultan

The customer premises equipment (CPE) runs ordinary IP forwarding and normally does not run MPLS.If the CPE does run MPLS, it uses it independently from the provider. It is important to note that the edge LSRs are part of the provider network and are controlled by the provider.

Need help with pop up window!

I'm working on an online graphic design portfolio and one of the pages features online animated Flash banners. The site can be viewed here...
http://truetilldeathhq.com/Skiz/main8_v7.html
I created a pop up window that displays a swf of the banner by putting this code on the View Banner link of each example of work...
on (release) {
var jscommand:String = "window.open('http://www.truetilldeathhq.com/Skiz/banners/336x280DuvalCX9.html','win','height= 296,width=352,left=112,top=330,toolbar=no,resizable=no,location=no,scrollbars=no ');";getURL("javascript:" + jscommand + " void(0);");
Two problems though. First is in Firefox the location bar with the url to the swf is visible, even though I set location=no as a variable in the code (it works ok in Safari). The window is also resizable in Firefox and Safari even though the variable is set to resizable=no. How can I fix this?
Second problem, even though I painstakingly set the left and top variables by trial and error to get the pop up window to open exactly in the center of the "stage" area of the site, when I post it and view it in a browser, the window pops up lower. When I'm in the fla of the site and I preview it in a browser, it's fine, but for some reason when I post the files online and then open it from http://truetilldeathhq.com/Skiz/main8_v7.html, the pop ups come in lower. Any fixes or advice on this?
Thanks for your help!

Forgive me for my ignorance, but I'm new to Flash and any kind of scripting and I didn't quite follow that page you directed me to. Right now I'm working up a Flash template and the action on the link for the banner pages looks like this:
on(rollOver) {
this.gotoAndPlay("s1");
on(rollOut, releaseOutside) {
this.gotoAndPlay("s2");
on (release) {
_root.popup_pressed=1;
_root.scrHEIGHT=240
_root.scroller.scroller.gotoAndStop(2);
_root.TM_title = "Work 1 read more";
_root.READ = 1;
_root.scroller.gotoAndPlay("s1");
How can I work up the on (release) so I'll get a simple pop up window, say 728x90, no scrollbars or resizing, that will open somewhere in the middle of the site? If I wanted a title to the pop up window, how would I do that?
Again, thanks so much for your time and excuse my newbieness.

Borderless pop up window

Hi
I have added a pop up widow to a site to display sizing information for garments, but it does look just like another window, what I want to achieve is a pop up window that is borderless and looks more like an image, any suggestions on how to achieve this

Hello Peter,
Take a look at this useful article on modal popups by Mary Lou on tympanus:
Nifty Modal Window Effects
You might want to skip the animation part for now!
Cheers,
Subhadeep

How save factory software on T400 and reinstall after clean install of Windows 7

Hi
I have a Thinkpad T400 2764-CTO Running Vista Business 32-bit and want to do a clean install to Windows 7 Pro.
Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

Please review the HP software and driver download page for drivers/software that are compatible with Windows 7. Also note that there is a BIOS update for Windows Vista that improves the system's ability to function with WIndows 7. Also read "Alerts" and other information regarding this product and Windows 7.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How backup/save software installed on T400 before doing clean install of Windows 7?

Hi
I have a Thinkpad T400 2764-CTO Running Vista Business 32-bit and want to do a clean install to Windows 7 Pro.
Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

"In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?"
As Maliha said (or implied) that doesn't work. Just copying installed programs doesn't set up the registry entries or any data folders and files they may use in your user files.
You might consider copying your entire user directory to large flash or DVD or external hard drive as a way to preserve your personal data and program data files. Things like Thunderbird mail or Firefox bookmarks are in C:\users\kathleenklein\appdata\... (which may not be visible unless you make them so) and can be plugged back into your Windows 7 install.
"I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated."
First, have you made your factory recovery media? That ensures that you can revert to factory Lenovo setup if you ever want to. To give the machine to your little brother, for instance. It will burn a pair of CDs and one or more DVDs.
You can/should also use R&R to save a current whole-disk image to external media. That lets you fall back to your current setup if necessary. This is likely to be fairly large. An external hard drive is usually required. Use advanced R&R to set up the target and start things off. Once you are sure that Win 7 is going to work for you, you can get rid of the saved Vista image and use the drive for your Windows 7 backups. You do make backups...
R&R can't (AFAIK) save your Vista user stuff and restore it to WIn 7.
Is this a clean install using Lenovo media or is it Microsoft vanilla? I just did a MS Vanilla 7 install. Since the service and recovery partitions in the Lenovo Visa drive configuration will be useless in a WIn 7 install (if MS vanilla) I used the advanced option and had the Win 7 install delete all partitions and just do its thing. It created a small boot partition and used the rest of the drive for C:
After installing '7, install the latest TVSU and let it pull down the basic/necessary Lenovo drivers and apps. After that you may choose to install the latest R&R. Surprisingly, it can be used to make backups even without the Lenovo partitions present. I've verified that by making a full image and restoring to a bare drive.
It's handy to Install '7, do a MS update, install TVSU, do a Lenovo update, install R&R and then burn a recovery set of CDs and DVDs so you can rewind to a sort of base-usefull-initially-updated condition should that be necessary.
As you probably already know, start here for your Lenovo Win 7 downloads: ThinkVantage Technologies Updates
Likely more or less than you wanted - but you asked
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Installing clean copy of Windows 7 without out-of-box state software?

I have the Toshiba Satellite A505-S6025 model and was wanting to do a clean install of Windows 7 on it. Without using the system recovery option and having it formated too out-of-box state. I was just wondering if it would effect the computer in any way? Because I know their are lots of system programs that come a long with it for key features. What do you think?

Perhaps I can add some usefull information here. Most, if not all, computer manufacturers no longer provide recovery disks. Some provide these at a small cost. They do provide intruction how to make these disks. There is a great amount of free information available on the internet how to do this. The hard drive on new machines usually has 2 partitions, 1 is the recovery partition (dive), the other is the system partition (generally drive "C"). These partitions also contain the product bloatwhere specific to there products. Most users find these utilities very useful. If you format the drive and install a fresh operating system (lets say Windows 7) you generally will only have 1 partition (drive "C") without the product utilities. The machine will work just fine. Keep in mind, you will have to download and install new drivers and operating system updates and perhaps will need to make some system changes, such as screen resolution. I DO NOT SUGGEST THIS FOR MOST USERS. Most users are starting to understand the need to backup their DATA, very few backup the system. Anyone that buys a new machine should first make the system recovery disks, then do all the system and driver updates and back up once again. I suggest purchasing a USB hard drive and a product such as CMS Bounceback. Backup the entire system, perhaps weekly or monthly depending on your useage. In the event of a hard drive failure, you can swop the drive and be back in business in less than 1 hour. You can also backup from the spare hard drive.
Stuff Happens !

Almost finished with site, really need help with pop up window!!!!!

I've got one last thing to finish up on this site I've been working on. I've posted what I've worked up so far at:
http://truetilldeathhq.com/main8_v7/main8_v7.html
I still have to finish linking the actual banner swfs on the Online Banners page, which will display animated banner ads for the portfolio. Ideally, when the user clicked the View Banner link, I wanted to have the banners display in a similar pop up window like the other examples of the work (with same title area, close button, etc., click the Detailed View button on Merchandise page for example). That was problematic due to different frame rates of the banner swfs, getting the pop up window to contain just the stage area of the swf and not the working area, getting the window to pop up in the middle and not get cut off at the right side, etc. Like I said, ideally I'd like to do this, so if anyone has a relatively quick fix, I'm all ears.
I figured my best route now is to somehow have Flash trigger an html pop up window when the link is clicked and have it display in the middle of the page at the exact dimensions of the banner. Anybody know the best way to do this? I'm at my wits end and I really have to have this finished for Monday so any help is more than appreciated, thank big time in advance!

Forgive me for my ignorance, but I'm new to Flash and any kind of scripting and I didn't quite follow that page you directed me to. Right now I'm working up a Flash template and the action on the link for the banner pages looks like this:
on(rollOver) {
this.gotoAndPlay("s1");
on(rollOut, releaseOutside) {
this.gotoAndPlay("s2");
on (release) {
_root.popup_pressed=1;
_root.scrHEIGHT=240
_root.scroller.scroller.gotoAndStop(2);
_root.TM_title = "Work 1 read more";
_root.READ = 1;
_root.scroller.gotoAndPlay("s1");
How can I work up the on (release) so I'll get a simple pop up window, say 728x90, no scrollbars or resizing, that will open somewhere in the middle of the site? If I wanted a title to the pop up window, how would I do that?
Again, thanks so much for your time and excuse my newbieness.

Clean install of Windows 7, product key failed

I wanted to do a clean install of windows. I have a Windows 7 Home Premium 64 product key on the bottom of the laptop. So I made a windows 7 usb boot drive from an iso file from Microsoft's website and formatted the hard drive. I installed Windows 7 with no problems. I go to type in the product key and activate Windows and it fails. Microsoft support says the product key is blocked and that HP is responsible for supporting pre-loaded Windows laptops.
Why is the Windows product key written on the bottom of my computer blocked? And how do i fix it?

Actually HP would ask you to contact MS. And MS would advice you to get Recovery media from HP. This is what is going to happen. You can try your luck with MS first.
MS withdrew all the Windows 7 ISO support, especially to OEMs 2 weeks back.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Satellite L500-128 - Clean installation of Windows 7 64bit

hello guys. I want to make some questions
I have windows vista in my laptop and I want to make a clean installation with windows 7 64 bit. I have seen that drivers are ok in the site. So here are my questions
a) should i delete the hidden recovery partition or not? (eisa config if i remember correct)
b) I have taken 4 dvds with toshiba recovery disc creator. If I erase every partition in the laptop how can I restore my DVDs? With a programme in Windows or just setting bios to boot from dvds and then the procedure is automatic? Is the first dvd bootable?
thanks in advance and sorry for my english

Hi buddy,
> so the disks i took backup what is it?
I assume you mean the Toshbia recovery disk. Right?
If yes this disk contains an image of factory settings. That means if you use this disk and install it, you have the same settings as you purchased it. So its called recovery disk / factory settings.
The recovery disk will always work. You can create 10 partition and/or install Linux. The recovery disk will always work and restore factory settings. With this disk you are on the safely side. :)
Furthermore the recovery disk doesnt contain programs that you have installed yourself. You can install what you want but the content on recovery disk is always the same.
> so where is the partition that the toshiba programme made backup???
To be honest this question isnt clear and detailed.
Generally the installed programs from Toshiba dont create a backup autmatically.
If you mean the HDD recovery option, the folder with this content and files is stored on the second partition in folder HDDrecovery. As I already wrote, the files are always the same and have nothing to do with the programs that you install. If you delete this folder, you cant use the HDD recovery option anymore.
And Windows recovery environment has nothing to do with Toshiba. You will find this feature on all Vista and Windows 7 computers. But both versions are completely different.
Last but not least if you want to create a backup of your current settings with all installed applications, tools, etc. you have to use an additional backup software like Acronis True Image. It creates also an image but of your current settings. ;)

Thinkpad S440: installing a clean copy of windows 7 professional

Hi there,
I wanted to install a clean copy of windows 7 professional on my thinkpad s440. With the initial install, I've had peculiar issues with some devices and the Lenovo software. The power manager caused a massive slowdown on resuming from sleep if I had memory-intensive applications open, which was completely resolved when I uninstalled it. There's been other issues with WiFi stability, webcam use and mousepad behaviour among others.
I have a couple of questions before going ahead with this. Firstly, the laptop has no visible signs of any COA or windows 7 product key. As the laptop only comes with the recovery partition and no disks, how do I know the windows 7 installation will activate successfully or that I won't need a CD key during the install?
If I use the digitalriver file to create USB bootable install media, is there a md5 checksum or something else I can do to ensure what I download is not corrupted or altered in any way? It's not easy using the internet without connection errors happening over a few hours especially with what I have to use in China!!
Any help appreciated!

My question is basically how to reinstall windows 7 without the Lenovo bloatware, especially if I don't have any Windows 7 CD key available.
I have searched for this before and anything I read assumes I have a CD drive, or a CD key for windows 7 professional or that I had windows 8 pro and used downgrade rights. None of those scenarios apply to me.
Can anyone out there help with this? Thanks in advance!

Is the pop up window that asks if you want your Mac cleaned up really from Apple?

We have been receiving a lot of pop up windows whenever using our new Mac and it always asks if we want to clean up our Mac and then the box says "Continue". I am very suspecious of this and cannot find out if it is for real and don't want to select it to see what happens. Can anyone help give info on this? From looking at other discussions, apparently others are also receiving this. Thank you, Noel

Of course not, and it probably comes from an application called MacKeeper, which is useless. See > https://discussions.apple.com/docs/DOC-3691
OS X has got its own maintenance scripts to keep your computer work correctly, so there's no need for cleaning apps.
To get rid of those messages, remove all the temporary files from Safari. Open Safari, go to Safari menu (on the menu bar) > Preferences > Privacy, and choose Remove All Private Data

I cant install an update to Firefox and cant remove the old version because a "Setup" pop up window "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" appears, reboots change nothing. What should I do?

A friend said she downloaded an update to Firefox (a version of 6, I believe) but didn't install the update, but the desktop icon was gone. The only way to launch Firefox was from the Programs folder. When clicking on the Firefox file, a "Setup" pop up window appeared stating "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" Clicking "No" does not launch Firefox and clicking "Yes" reboots the computer, but nothing changes after restart and the same series of events keeps re-occurring. When clicking on the safe mode file, Firefox was launched. I went to "Add/Remove Programs" and found Mozilla Firefox 3.6.3. When attempting to remove the program, the same reboot "Setup" pop up appears, and the same non-results as previously described, persisted. I deleted all Firefox files and deleted the update set up .exe files. I again tried to remove the Firefox 3.6.3 program, with the same outcome as the previous attempt(s). I went to the Firefox website and downloaded the updated Firefox 7.0.1 set up .exe file, saved and ran it. When I reached the Setup Wizard page that prompts a "Standard" or "Custom" installation, I clicked on Standard and the same reboot pop up window appeared, again with no change after the reboot. So I have a Program installed (Firefox 3.6.3) with no files, and which can not be removed, an executed update/download .exe for Firefox 7.0.1 that can not be completely installed due to the failure to update by reboot problem. I'm out of ideas on how to try to resolve these problems. Any help would be greatly appreciated! Thank you

Try a clean reinstall.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
* Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help.

Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help., Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help.

Remember you can only build an iPad app using your Single Edition solution (which is included in your CC membership). So you'd need a Pro or Enterprise version of DPS to be able to create the Android version.
You can create pop-ups in InDesign using the slideshow options and a multi-state object. But it's all manual labour so you'll spend a lot of time on this, also depending on the layout of your design.

Want to design a "clean" pop up window

Similar Messages

Maybe you are looking for