Want to include more than one domains for SSO

I have 3 authentication sources (3 NTLMs).I have hooked one to SSO and want to do same to the other 2. Do i need to do anything special in the PTconfig settings or anywhere else.Like what will happen to DefaultAuthCourcePrefix -- <DefaultAuthSourcePrefixvalue="1stdomain"/>

Actually, 5.0 will support multiple auth source prefixes with SSO out of the box, if the SSO itself provides the domain/prefix and the prefix of the portal user accounts is the same as the one the SSO provides.
In the case of NTLM, since Windows provides the domain name, you just need to make sure your authentication sources use the domain name as the Plumtree prefix:
http://portal.plumtree.com/portal/server.pt/gateway/PTARGS_0_13271_574734_0_0_18/windows_integrated_authentication_sso_with_multiple_nt_domains.htm

Similar Messages

BDC: To Include more than one value in one field.

Hi All,
I want to include more than one value in a particular filed, while its running in back ground.
The requirement is like this
perform bdc_field using 'PNPABKRS-LOW'
'01'.
01 is a filed on employee payroll type : management staff.
02 - Filed staff
03 - work men
How can i include 02 and 03 also for the perform.
it has to check whether the employee can belongs to any of the above three.
Thanks in Advance,
Points Rewarded for Help full answer.

Hi, Ramesh,
You can not use all the 3 fields at the same time, instead you can pass on one variable in that perform.
eg.
take all your staff value in one internal table and use the following code
loop at i_tab into wa_tab.
data : l_variable type string.
perform bdc_field using 'PNPABKRS-LOW' wa_tab-staff.
endloop.
in first run of loop it will take value '01', in second '02' and so on.
regards,
vikas
plz reward if helpful.

Wanted to catch more than one record in selected rows

Hi all,
I am using the following function to catch the selected rows.
CALL METHOD w_grid->get_selected_rows
IMPORTING
et_index_rows = i_selected_rows.
it is catching only one row.
but i want to catch more than one record.
for example i will select more than one record from the grid and press the approve button. so that the status will change in the database.
but what is happening is if i select 2 or more records it is approving only first record. because in the i_selected_rows only first row is catching. what i have to do to catch other select rows also.
thanking u.
regards,
giri.

Hi,
CALL METHOD w_grid->get_selected_rows
IMPORTING
et_index_rows = i_selected_rows[] ."<<<< try to put these into []
please not open multiple threads
a®

More than one version for orgunit attr

Hello all,
I want to load more than one version for ORGUNIT.
I'm able to load few hierarchy version for orgunit but only one version (the active one) for the attributes and texts of ORGUNIT .
Furthermore in my R/3 implmentation position is a part of orgunit hierarchy.
this means that position is also part of a specific version of orgunit.
But when loading POSITION into BW we can only load the active plvar so i
actually lose the information existing in other plvar for position in R3.
How can i extract and load more the one version for position and orgunit ?

Yes, there are multiple models. Buy one designated for your country.

[Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]

Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
     at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
     at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
     at WLSecurityTest.runTest(WLSecurityTest.java:75)
     at WLSecurityTest.<init>(WLSecurityTest.java:66)
     at WLSecurityTest.main(WLSecurityTest.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
     at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
     at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
     at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
     at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
     at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
     at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
     at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
     at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;

If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains).

Configure workflow notification mailer for more than one domain

Hi ,
Is it possible to configure workflow notification mailer for two different Domains ?
We are using more than one domain so the notifcations/mails has be to be directed to more than one domain .
please guide me through some docs .
Regards .

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

More than one domain name

Hello.
I have more than one domain name that I want re-route to one web address. How can I do this with i-web? I also want to know how to set up a personal email address for my web site, (ex. [email protected]) Im not sure how to do this either with i-web.
Thanks!!!!
Alan

You need to enter a personal domain name in your .Mac account and then you have the option of using CNAME once and then web forwarding for the rest. You need to go to your domain name registrar/hosting company and alter the DNS setting for this and also use the masked or unmasked web forwarding options.
If you want to use the e-mail option, then this will also be done through your hosting company. .Mac just hosts the site, not the domain name.

Creating more than one account for a single user

I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
Thanks for all the help! It feels good to be a part of the goodguys team =)
Thanks again!

Ghost,
First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
Scott

More than one index for a column.

Hi,
I am trying to create more than one index for a particular column of the table.But oracle does not allow more than one index for a column.
I just want to make sure whether we can add more than one index for a column
and if yes what are the scenarios.
Because as far as i know some database allows more than one index for a single column.

You cannot create more than one index for the same column(s).This is not so true Nicolas. Look at following example:
SQL> create index idx_mytest_id on mytest(id);
Index created.
SQL> create index idx_mytest_id_desc on mytest(id desc);
Index created.
SQL> create index idx_fbi_mytest_id_upper on mytest(upper(id));
Index created.
SQL> create index idx_fbi_mytest_id_upper_desc on mytest(upper(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_lower_id on mytest(lower(id));
Index created.
SQL> create index idx_fbi_mytest_id_lower_id_dsc on mytest(lower(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_tr_up on mytest(trunc(upper(id)));
Index created.
-- I can still continue but for this example this will be enough
SQL> select index_name from dba_indexes where table_name = 'MYTEST';
INDEX_NAME
IDX_MYTEST_ID
IDX_FBI_MYTEST_ID_UPPER
IDX_MYTEST_ID_DESC
IDX_FBI_MYTEST_ID_UPPER_DESC
IDX_FBI_MYTEST_ID_LOWER_ID
IDX_FBI_MYTEST_ID_LOWER_ID_DSC
IDX_FBI_MYTEST_ID_TR_UP
7 rows selected.You can see 7 indexes for one column (ID) and I could still continue...
So according this test we can say you can't create more than one index for one column (or the same group of columns in case of composite index) with same condition(s).
Message was edited by:
Ivan Kartik
Or simplified: you can't create the same index for same column(s) twice :-)

More than one style for a single link state?

RH 8 outputting CHM
Hello,
Is it possible to define more than one style for a single link state?
For example, I would like a link in the footer of my master page to be smaller than the links that appear in the body of my topics. I want to retain behavior, and simply change the point size.
I can't simply hand format in Design mode, because my link is within a script. Or, am I missing something easy here?
Thanks much.

I'm pleased to say I figured out how to change the formatting of a hyperlink embedded within a script.
Within the script, I used a var string to reproduce the text in my link. Then I used another var to change the string size.
So, here's the part of my script that produces what I'm after:
var mailDisplay = 'Was this information helpful? ';
var str = 'Was this information helpful?';
var mailDisplay = str.fontsize("1");
Upon generation of the CHM, the script trumps the CSS. It's a beautiful thing.

Pass more than one argument for action in the URL

Hi,
i've created a DesktopURL object with which i refere back to the Front Page. With the same URL i want to minimize two channels at the same time. I know that i can minimize one channel with the "action=minimize&provider=myProvider" attribute.
Is there a way to pass more than one provider for an action ?
Or exists another way to do that ?
thx

In fact, my code was completely right. I tried with commas and it hasn't work. When I tried again without commas it worked perfectly...
Nevertheless, thanks for the advice!
Gilmar

SapScript - Print table out_par - more than one entry for object

Hi Gurus,
following problem.
I have a SapScript form and call an external program from within the form.
In this programm I get more than one entry for the same out_par-value - this is correct.
My problem now is that on the form there is only printed one of the entrys.
Here my coding in SapScript.
/:           DEFINE &ZZ_OBJECT& = '        '
/:           PERFORM LESEN_OBJEKTLIST IN PROGRAM ZIHFORM
/:           USING &CAUFVD-AUFNR&
/:           CHANGING &ZZ_OBJECT&
/:           ENDPERFORM
*           All involved object:
*           &ZZ_OBJECT&
Many thanks in advance for your help.
Regards

In Sapscript PERFORM-ENDPERFORM statements, the parameters can contain only one value as they are variables of type character & length 80.
If you want multiple values in your CHANGING parameters, fetch all of them in different variables. Also, in your program store them in the same order, in the output internal table of structure ITCSY.
Check this thread
http://wiki.sdn.sap.com/wiki/display/profile/ExternalSubroutinesinSAPScript

Can we have more than one contructor for one class?

I need to provide more than one constructor for one class because I need to have one parameter passed to one constructor and many to another. Is that possible and how it will affects in the instantiation of the object?
Thanks again
Jorg3

One more note about constructors...
if you define a constructor to take argument(s)
and don't define the default constructor it is not available.
Example
public class myClass
   public static void main(String args[])
      // Ok
      myClass c = new myClass("Hello World");
     // Not Ok
     myClass c2 = new myClass();
   } // main
   public myClass(String name)
      named = name;
   } // myClass
String named = null;
} // myClassIf you want to be able to construct the object with the default and parameter constructors, you must declare them all...
public class myClass
   public static void main(String args[])
      // Ok
      myClass c = new myClass("Hello World");
     // Ok
     myClass c2 = new myClass();
   } // main
   public myClass()
      named = "No Name";
   } // myClass
   public myClass(String name)
      named = name;
   } // myClass
String named = null;
} // myClass

MORE THAN ONE DOMAIN NAME WITHIN MY MOBILEME ACCOUNT ?

I own more than one domain name. Can Mobileme host more than one of them and keep them separate for viewers so that somebody logging in to website 1 does not also get the files etc for website 2 ?

mrs green wrote:
Can Mobileme host more than one of them...
Welcome to the discussions, Mrs Green. MobileMe doesn't host domain names +per se+ — MobileMe accepts a re-direction of a domain name to its servers. MobileMe will accept only one domain name re-directed via CNAME, but can accept more re-directed domain names via "WebForwarding".
...and keep them separate for viewers so that somebody logging in to website 1 does not also get the files etc for website 2 ?
See +"WebForward with Cloaking (or masking)"+ here:
http://iwebfaq.org/site/iWeb_Domains.html

Set more than one InputVerifier for a JComponent

Is it possible to set more than one InputVerfier for a JComponent. For example, there is one InputVerfier which checks for null values, and another which checks for date format. Can I have both these InputVerfiers attached to a single JComponent ?
regards,
nirvan.

The problem is not the InputVerifier, the problem is you want to use multiple different classes to do the validation. Even if you use another approach you would still have the problem of invoking two different validation classes.
The other approach for validating input fields is to do the validation in the actionPerformed of your "Process/Submit" (or whatever you want to call it) button.
If you want to validate data as it is entered you would use a DocumentFilter.

Want to include more than one domains for SSO

Similar Messages

Maybe you are looking for