Want to transport Zsapscript in local objects to quality server ?

Hi all,
I want to transport Zsapscript which is stored in my local objects to quality server ? can you tel people
tel me how to do it ?
thanks,
Siva.

Hi Siva,
Local objects can't be tranportable.
you have to assign a tranport request to the local object.
steps to assing the tranport request to local object
1) go to SE80
2)Search with the Local objects from the drop down in the Repository Broweser
3) selct your script and right click on that, then go to Other funtions--> Change package assginment
4) here you can create or assign the tranport request.
Regards!

Similar Messages

How to change Transport request into local object $temp.?

Hi experts,
I would like to know to how to change a Transport request into and local object.
I have already assigned Infopackage to TR, but its not required. We dont want this infopackage to be transported to prod. So how can i change that as a local object.
Please put our valuable inputs.
Thanks in advance.
Regards,
Dubbu

Go To that Infopackage ,
Extras Menu----Object catalog entry. There you can change package name.
or
In SE09---Under the transport requests you can search for the infopackage name and delete from the TR.
Regards,
Srikanth
Edited by: srikanth on Feb 19, 2009 2:26 PM
Edited by: srikanth on Feb 19, 2009 2:27 PM

How to change transport request to local object again--plz help

Hi all,
By mistake I saved my FM in transport request.It is not released yet.I want it to be back in local object.Issue is that,when i deleted subrequest and that object from se09,package is not getting changed because the Function group is SAP standard,and not allowing changes.
Plz help.....I am in real problem..
Thanks in advance
Meena

Hi,
Goto SE01,
enter the TR number
DISPLAY
Expand the TR object list
Place cursor on the object & right click & select DELETE object
You will get a popup asking the object is locked..do u want to proceed.. say YES
This will remove the object from the TR..
Now you can delete the TR if it doesnt hv any other objects. If you delete the TR then object wud authomatically come under local objects.
else...
Open the object & goto attributes.. change the class & save.
Best regards,
Prashant

Error while transporting the badi from dev to quality server

Dear Freinds
         Iam getting the error " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
        i expended the error (with return code as 8) and i found th below errors
Multiple active implementations for definition HRECM00_CALCBASE
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
The errors affect the following components:
    BC-DWB-CEX (Customer Enhancements)
What exactly this error iam not able to trace . Before releasing the object from the
development server i have see any error's are there the extended check hasnt given me any errors either.
The help for this error says that
"Procedure
Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
i have did what sap has said ............. i can see that in the quality server a custom badi
of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
any one have idea on this error pleae let me know.
regards
saymala r.

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
    EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Cannot move ID objects to Quality Server using CTS

Dear Friends,
We are using PI 7.1. We have created necessary HTTP & TCP/IP Destinations in PI QA server and then transported using CTS all SLD & ESR objects.
Now we are struck up during moving ID objects from DEV PI to QA PI.
Please give me your solutions to resolve this issue.
Thanks
John

Are you getting any specific error at any point? First make sure that SLD transport is properly done, with objects of both Dev and QA system and transport targets properly defined.
Regards,
Prateek

Error while releasing object to quality server

Hi,
   I have written follo select stmt ,
    SELECT BELNR                                                              "Case1
           GJAHR
           EBELN
           EBELP
           DMBTR FROM EKBE
                 INTO TABLE IT_EKBE
                 FOR ALL ENTRIES IN IT_BKPF2
                 WHERE BELNR = IT_BKPF2-AWKEY+0(10).
When doing syntax chk , getting warning as "Lenth specification of AWKEY is ignored when FOR ALL ENTRIES IN used".
I activated the object.
Bur while releasing it to quality , in Code inspector 1 error is coming saying
"Large table EKBE : No first field of a table index in WHERE condition".But still i managed to release it.
What is the meaning of that Error. Is it that i m not using a primary key in WHERE cond while accessing a huge table EKBE ?
Is it going to impact anywhere in quality or production server as requset got released with ERROR ?
How to remove such errors which r appearing in code inspector and not in Syntax check.
Waiting 4 ur replies ....
Thanks,
Poonam.

HI,
FOR ALL entries expects fields of same length...
U need to change ur code..Put a field of type belnr and pass the values
loop at it_bkpf2.
it_bkpf2-belnr = IT_BKPF2-AWKEY+0(10).
modify it_bkpf2.
endloop.
SELECT BELNR "Case1
GJAHR
EBELN
EBELP
DMBTR FROM EKBE
INTO TABLE IT_EKBE
FOR ALL ENTRIES IN IT_BKPF2
WHERE BELNR = IT_BKPF2-belnr.
Regards,
Nagaraj

Error in Transporting Open Hub Destination Objects

Hi Experts,
When i transport the open-hub destination to Quality server from development, the error No Rule Type Exists occurs while activating the transformation.
The objects are transported but transformation & DTPs are inactive.
Please assist as this is for the first time Open-Hubs are being transported in my system.
Any help will be greatly appreciated.
Thanks,
Sumit

Hi,
the return code is 8
I checked and here is error log:-
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
   Activation of Objects with Type Transformation
   Checking Objects with Type Transformation
   Checking Transformation 08FM6JIPU6MCLHM2LWBY02OT6SXOPDNY
   No rule exists
Checking Transformation 09RS1PONVSGIHIJEHRGDCWPP4UD87TBY
   No rule exists
Checking Transformation 0MJTLNXZAUI7SKRWPKEFUIOCMB8X5TWQ
   No rule exists
Saving Objects with Type Transformation
Thanks,
Sumit

How to Transport Sender/Receiver ID objects in SXMB_ADM to Quality System ?

Hi,
   I want to transport Sender/Reciever ID configuration to Quality system.
   Can you please let me know how can i do that ?
   Also can you please let me know the tables in which these configurations are stored ?
Thanks
sourav

Hi
If the QA system has different client than Dev will it get migrated via transport request as you have mentioned above?
I have manually created an entry in my transport request.
     R3TR TABU Table keys: Client = 250 and Object_key = XYZ.
     My QA system has different client than dev. QA is 300. Dev is 250.
    When I migrate this request will the table entries automatically maintained/updated with client 300 in QA?
Thanks
Gopal

Transporting ODS from Developement to Quality server

Hi,
In Quality server I am haveing ODS with out one navigational attribute included in it but it contains data.same is avaliable in development with navigation attribute object included in it.Now we want to transport this ODS from development to Quality.Kindly let us know if we need to delete the data from ODS in quality before moving this ods which is in the delevopment.Technical name for both ods is same.
Regards,

Hi,
You don't have to delete the data. The transport will work fine. But, the more data you have, the longer the transport will take.
Cheers,
Kedar

Error : While Importing the Objects in Quality

Dear all,
I'm facing some error while transporting the Objects to quality server. The error's like
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1110LS does not exist
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
Anyone suggest me how to solve this error..,
Thanx in Advance..
Regards,
Saran

Hi saran,
Check the source system connectivity of the Quality system. Also check whether you have transported the datasources related to those objects that you transported from DEV to QAS.
First you need to transport the Datasources created in R/3 and then replicate them in QAS/Prod and then transport the objects in BW from DEV to QAS/Prod.
Check all these things and if still the problem persists... Refer to the below threads which may help u...
Transport Problem - Reference to Transfer Structure not available
No Source system exist
Assign points if this helps u...
Regards,
KK.

Assign a local object to a transport number

Hi mates,
I have created a structure and as I wanted to save a activate it I entered my transport number. However the system returned with the message "No suitable task available under request transport number xxxxxxxxx".
- Why this happened ?
- Can I save the structure under local objects and assign it to a transport afterwards if yes how can I do it ?
Thanks for you comments
Kami

When you save an object, the transport layer it goes to (if any) is determined by the package. If you assign to package $tmp, you won't be asked for a transport.
If you assign to a package that is defined to use local, then the transport required will be a local one.
To transport the object to another system, you should assign it to a package that is defined to transport to the other system.
However, so long as an object is on a transport, when you release the tp, you can place the tp file at the OS level in the appropriate directory of the destination system, and simply add it to the import queue.
matt

Local object to transport request for a form

Hi,
I have a form saved as local object and want to convert it as transport request.
how to save this form created by se71 as a transportable object.
thanks!

Hi,
I dont think this can be done through SE71.Please follow the following procedure.
First create a new Transport request in SE01.
Goto SE80-->Local objects
Here right click on your object name and reassign the package to your desired package name.
Here it will ask for the Request.Give your previously request here.
This will assign your form to the new request you created.
Regards
Avinash

How to make local Object Request as Transportable Request

Hi,
I have saved as local Object , Now i need to make has transportable request.
Can any body tell how to do?
Regds,
C.V.
Message was edited by:
P.C.V.

Hi Chakri,
Drag and drop that object into right screen of Transport connector tool and then click on Click on Truck button to create the Transport request.
With rgds,
Anil Kumar Sharma .P

Local Object Program Transport to Request

Hi Friends,
I was created one "Z " Report in local object package and Created new Request . But I do not know how to transport local object package to Request package.
Please give me clear information,
Thanks
Saravanan R

Hi Saravanan,
open your code in SE38.
then in menu bar click GOTO->OBJECT DIRECTORY ENTRY
it will now show you the current package which y\would be $TMP for you.
change it to a package. click F4 on that field if you have a Z package better use it.
then when you click save it will ask you a transport request number. either you can select a transport request which you have created before or you can create there it self clicking the create button.
after the TR is assigned, activate the code again.( as now it will be inactive status)
now you can release the TR from TCODE: SE01 or SE09 or SE10. for releasing you have to release the task first and then the TR.
after it is released you can import it from the server to which the target has been set.
Hope this helps
Somu

Only want to transport security objects in BPC

Hi,
I only want to transport Security objects in BPC from DEV to QAS
Is it possible ?
I setup the UJT_TRANS_CHG table entries in DEV the following way -
- Security - Development
- All others - Production
Will that work ? Is it going to mess up anything in QAS system ?
Do I need to have the same setup in QAS system also ?
Any help would be highly appreciated.
thanks
J

Basically what it is saying is that you always need to have the following TLOGO objects in the UJT_TRANS_CHG table set to "Development". This is required by the framework, If they are not set this way, you run the risk of messing up the objects in the target system. Also, I bellieve that as of SP7 and above, you don't have to worry about this, as these 4 TLOGO are harded coded in the framework to always be triggered regardless of the setting in the UJT_TRANS_CHG table.
ASET
APPM
DIME
DIMA
So again, all you need to do is make sure that these TLOGOs are set to Development, as well as the security ones, and the security data will be transported successfully. Remember that you must transport your UJT_TRANS_CHG records to the target system before transporting the AppSet.
Regards,
Rich Heilman

Want to transport Zsapscript in local objects to quality server ?

Similar Messages

Maybe you are looking for