*** WARNING = DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_H
Hi Guys - I have installed EHP5 ready system and now I am upgrading it. It is a brand new system and it tuns on Oracle 11g and Linux Redhat. I am on downtime phase and upgrade after switching the kernel trys to start the system. I tried to start the system myself I am getting the following error on dev_disp trace file:
I have also tried to upgrade the kernel to the latest there is but I have had no luck.
Please help.
Wed Jul 27 19:22:44 2011
kernel runs with dp version 130000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
length of sys_adm_ext is 588 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 27742) [dpxxdisp.c 1275]
shared lib "dw_xml.so" version 90 successfully loaded
shared lib "dw_xtc.so" version 90 successfully loaded
shared lib "dw_stl.so" version 90 successfully loaded
shared lib "dw_gui.so" version 90 successfully loaded
shared lib "dw_mdm.so" version 90 successfully loaded
shared lib "dw_rndrt.so" version 90 successfully loaded
shared lib "dw_abp.so" version 90 successfully loaded
shared lib "dw_sym.so" version 90 successfully loaded
shared lib "dw_aci.so" version 90 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >devsand01_T12_00 <
DpShMCreate: sizeof(wp_adm) 52072 (2264)
DpShMCreate: sizeof(tm_adm) 5581368 (27768)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 80000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/576056/576064
DpShMCreate: sizeof(comm_adm) 576064 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2296)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3928
DpShMCreate: SHM_DP_ADM_KEY (addr: 2af0b5455000, size: 6464088)
DpShMCreate: allocated sys_adm at 2af0b5455008
DpShMCreate: allocated wp_adm_list at 2af0b54580f0
DpShMCreate: allocated wp_adm at 2af0b54582d8
DpShMCreate: allocated tm_adm_list at 2af0b5464e48
DpShMCreate: allocated tm_adm at 2af0b5464e90
DpShMCreate: allocated wp_ca_adm at 2af0b59b78d0
DpShMCreate: allocated appc_ca_adm at 2af0b59cb158
DpShMCreate: allocated comm_adm at 2af0b59de9e0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 2af0b5a6b428
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 2af0b5a6b4d0
DpShMCreate: allocated j2ee_adm at 2af0b5a6b508
DpShMCreate: allocated ca_info at 2af0b5a6c468
DpShMCreate: allocated wall_adm at 2af0b5a6c480
DpCommAttachTable: attached comm table (header=2af0b59de9e0/ft=2af0b59de9e8)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (2 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x2af0bbca3000
EsStdInit: Extended Memory 4096 MB allocated
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13054]
Wed Jul 27 19:22:52 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
Wed Jul 27 19:23:01 2011
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1661]
***LOG Q0K=> DpMsAttach, mscon ( devsand01) [dpxxdisp.c 12296]
use SAPLOCALHOST=<devsand01> as internal hostname
MBUF state LOADING
DpStartStopMsg: send start message (myname is >devsand01_T12_00 <)
DpStartStopMsg: start msg sent
**START Linux Memory Parameter Check
virtual memory: hard-limit = UNLIMITED
virtual memory: soft-limit = UNLIMITED
core size: hard-limit = UNLIMITED
core size: soft-limit = 0 MB
data segment size: hard-limit = UNLIMITED
data segment size: soft-limit = UNLIMITED
stack size: hard-limit = UNLIMITED
stack size: soft-limit = 10 MB
max open files: hard-limit = 65536
max open files: soft-limit = 65536
Page Size: 4 KB
kernel.shmmax = 65536 MB
kernel.shmall = 16777216 MB
**END Linux Memory Parameter Check
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Wed Jul 27 19:23:51 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Jul 27 19:23:52 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Jul 27 19:23:53 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Jul 27 19:24:01 2011
DpModState: change server state from STARTING to ACTIVE
Wed Jul 27 19:24:07 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Jul 27 19:24:21 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Jul 27 19:29:30 2011
DpSigInt: caught signal 2
DpHalt: shutdown server >devsand01_T12_00 < (normal)
DpModState: change server state from ACTIVE to SHUTDOWN
DpHalt: stop work processes
Wed Jul 27 19:29:31 2011
DpHalt: stop gateway
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
DpHalt: waiting for termination of gateway ...
Wed Jul 27 19:29:32 2011
DpStartStopMsg: send stop message (myname is >devsand01_T12_00 <)
DpStartStopMsg: stop msg sent
Wed Jul 27 19:29:33 2011
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12687]
MBUF state OFF
MBUF component DOWN
DpHalt: cleanup EM
DpHalt: cleanup event management
DpHalt: cleanup shared memory/semaphores
DpCleanupSharedResources: removing request queue
***LOG Q05=> DpHalt, DpHalt ( 27742) [dpxxdisp.c 11266]
DpHalt: *** shutdown completed - server stopped ***
t
I knew you are going to ask for dev_w0 log. I have to tell you why I can not produce the latest dev_w01 log.
I have downloaded extended version of the Linux kernel not knowing that extended version is for Linux 6.0.
My OS version is Redhat 5.7. Since I applied the extended version of the Linux kernel, I can no longer produce a newer version of the dev_w0 log.
I tried to backout and install the unicode kernel 720 for Linux, but for some reason all the libraries are either missing or pointing to Redhat 6.0. I am not sure how to proceed.
However I have the upgrade logs, That I can paste. This is the output of troublesav.log:
ENV: PATH=/dat/sapsw/erp_6.0/EHPI/abap/tools:/oracle/T12/112_64/bin:/us
/java-1.4.2-ibm-sap.x86_64/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/u
sr/X11R6/bin:/usr/sap/T12/SYS/exe/uc/linuxx86_64:/usr/sap/T12/SYS/exe/r
t12adm:.
ENV: SAPSYSTEMNAME=T12
ENV: auth_shadow_upgrade=0
ENV: dbms_type=ORA
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=T12
EXECUTING /dat/sapsw/erp_6.0/EHPI/abap/tools/SAPCAR (/dat/sapsw/erp_6.0
p/tools/SAPCAR) -cf /dat/sapsw/erp_6.0/EHPI/abap/log/SAPehpi_troubletic
sar -C /dat/sapsw/erp_6.0/EHPI/abap -A /dat/sapsw/erp_6.0/EHPI/abap/tmp
.LST
tslx06:t12adm 88>
>> 2011/07/28 05:59:32 END OF PHASE MAIN_NEWBAS/STARTSAP_NBAS
>> Current module status: stopped in MAIN_NEWBAS/STARTSAP_NBAS
>> Waiting for request handler...
>> Received 'next' action for unit 'EXECUTE'.
>>>> Repeat Phase <<<<
RESTART: Stopped in phase MAIN_NEWBAS/STARTSAP_NBAS
01) * Repeat phase MAIN_NEWBAS/STARTSAP_NBAS to continue at the point
it stopped
02) - Exit this program
Choose action: Repeat phase MAIN_NEWBAS/STARTSAP_NBAS to continue at th
e point it stopped
Execution of MAIN module "Downtime II: Conversion, Main Import, XPRAs"
begins at 20110728092442
>> 2011/07/28 09:24:42 START OF PHASE MAIN_NEWBAS/STARTSAP_NBAS
Stopping system first...
Waiting 20 seconds for proper system stop...
Starting system ...
>> 2011/07/28 09:25:46 END OF PHASE MAIN_NEWBAS/STARTSAP_NBAS
tslx06:t12adm 90>
Error logs from startsap_saphostagent.log:
start hostcontrol using profile /usr/sap/hostctrl/exe/host_profile
[ERROR] Already Running (pid=4455)
start hostcontrol using profile /usr/sap/hostctrl/exe/host_profile
[ERROR] Already Running (pid=4455)
start hostcontrol using profile /usr/sap/hostctrl/exe/host_profile
[ERROR] Already Running (pid=26230)
start hostcontrol using profile /usr/sap/hostctrl/exe/host_profile
shell-init: error retrieving current directory: getcwd: cannot access p
arent directories: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access p
arent directories: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access p
arent directories: No such file or directory
Similar Messages
-
Warning asl : dropping ctlmsg cannot alloc msg block
hello
we have solaris 2.6 intel on compaq proliant 5500 machine.
Also oracle 7.3.4 server running on it.
we have upgraded its memory 1 GB to 2GB for 2 mounths.
System hangs after reaching a point which gives an error message on console like
"Warning asl : dropping ctlmsg cannot alloc msg block".
and we have an error message on /var/adm/message file like "Aug 3 10:36:58 cll inetd[167]: accept: Not enough space"
can anybody help us?
thanksEnabled Extensions:
com.microsoft.safari.binghighlights-UBF8T346G9 (24 - 1.0.24) Bing Highlights
org.siracusafamily.reloadbutton-6STWMHAZC2 (1.2 - 1.2) Reload Button
com.readability.safari-6K2928F88K (20 - 1.10) Readability
com.lastpass.lpsafariextension-N24REP3BMN (3.1.21 - 3.1.21) LastPass
com.wondershare.safari.allmytube-YZC2T44ZDX (4.8.0.0 - 4.8.0.0) AllMyTube
com.dashlane.dashlanesafari-5P72E3GC48 (1 - 2.4.0.55923) Dashlane
One or more Safari extensions are the cause for Safari crashing.
Can you access Safari > Preferences > Extensions before Safari crashes??
If not, startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Then launch Safari. Then go to Safari > Preferences > Extensions. Uninstall all the extensions then quit and relaunch Safari to test.
Once you are in Safe Mode, click Restart from the Apple () menu.
You also need to uninstall Rapport. You don't need to be in Safe Mode to do this.
Instructions here > Uninstalling Rapport on Mac OS X | Trusteer
FYI, Rapport software has caused many Mac users problems as noted from the results of an ASC search here. -
Report "completed with warning " APP-FND-00500: AFPPRN received a return
hi ,
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORG_ID='200'
P_PO_NO_FROM='9068'
P_PO_NO_TO='9068'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Report Builder: Release 6.0.8.25.0 - Production on Fri Dec 2 16:56:40 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 6098208
Number of copies : 1
Printer : wkwcomm
wkwcomm: service-unavailable
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.Please post the details of the application release, database version and OS.
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?Is this a custom or seeded concurrent program?
Is the issue with this report only?
Is this output from the printer that the report complete successfully with warning?
Do you get an output file?
wkwcomm: service-unavailableIs wkwcomm the printer name (queue name)?
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1Apps Print Requests Fail with lp: unable to print file: client-error-not-found [ID 359890.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=APP-FND-00500&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001 -
How to handle very high volume msgs in XI
I have a scenario where 6 million msgs/ hour(xml) have to be picked form source and to be sent to target ,
How do we handle this high volume of data is there any good practice
Pls suggest .Hi Anubhav,
if you just have to send source file to target system without doing any mapping, then it dont use XI for it.......because you have a very high volume of msgs and for this such load, XI will start putting your msgs in wait status and may be the JAVA engine may go down because of insufficient memory.......
So better have an FTP utility in target system.....connect to source system by this...and move the files from source to target by this FTP utility......
But if you have to do a mapping from source msg to target msg, then use XI....but try doing the mapping by graphical mapping and dont go for ABAP mapping to reduce memory usage for your scenario.......
Thanks,
Rajeev Gupta -
1473R DMA timeout at high speed?
I'm using a 1473R with a Basler line camera spl2048-140km. I managed to modify the example to run the camera on both 8 tap 8 bit mode and 4 tap 12bit mode. Both run well at low speed. However, there are two issues when I try to run it at high speed.
If I set the frame trigger at relatively high speed before I start the acquiring (like 30kHz), a DMA timeout error will jump out as soon as I start it (error -8999). If I set it at low speed (like 100Hz), it will run fine as I increase it to 30kHz after it starts.
Another issue is, when I try to push the speed of the camera to its limit, which is 70kHz for single channel mode and 140kHz for dual channel mode, I will always have the error -8999. It happens when the speed reaches 100kHz in 8 tap 8 bit mode, and 50kHz at 4 tap 12 bit mode. I wonder where the bottle neck is and if there will be a way to solve it.
Thanks!I'm not that familiar with the FPGA code for the 1473R, but I am fairly sure that the DRAM example has been tested with fairy fast cameras. That said, it seems from looking at it that it does not have a good feedback mechanism if PCIe bandwidth is not available. It's only feedback seems to be if the host DMA buffer fills up (e.g. host code doesn't read it fast enough). Since PCIe/memory bandwidth is extremely host-dependent, it is quite possible this example is not well tested with the combination of very fast cameras and some systems that have more jittery PCIe bandwidth. I'm not sure of the specifics of the DMA FIFO behavior, but my assumption is that the number of elements remaining really only concerns itself with host space available. For most situations, the minimal amount of FIFO built into the DMA engine likely makes this work fine.
First, I'd try instrumenting the code to figure out which specific part in the FPGA code is timing out. The example doesnt seem to track all the error cases well.
Assuming it is the host DMA that times out AND it always reports that there is free space available, my suggestion would be to modify the code to let the DMA step retry with the same data the next clock cycle on a Timeout and let the data back-up in DRAM as needed.
Eric -
WARNING JBO-35007 after validator throws msg
Could somebody help me understand what is going on here? I am trying to create a simple creation form on a table that has a field being populated with a db sequence. All seems to work fine until I put a backing bean method validator on one of the fields. Now when the validator fails (throws msg) and I try to correct the input I get the JBO-35007 msg. It seems that when the 35007 message comes back the iterator is now pointing at the first row in the table, instead of the newly created row. I am using 10.1.3.1.0 ADF BC w/ JSF. I have created the db objects (see below) and created an entity object with the id set to db_sequence, then a vo. The only other field in the table is description. I have created a simple validator that states if the user input a Z show an error. (see below). Can anyone tell me what I am doing wrong? I have tried to set refresh to never (thinking that was doing some weird invoke create and I have tried setting the enableTokenValidation to false to no avail.
Thanks,
Doug
create table x1 (x_id varchar2(10), description varchar2(30));
ALTER TABLE x1 ADD
CONSTRAINT x1_PK
PRIMARY KEY (x_id)
ENABLE
VALIDATE;
CREATE SEQUENCE x_id_S
START WITH 1;
CREATE OR REPLACE TRIGGER ASSIGN_x_id BEFORE INSERT ON x1
FOR EACH ROW
BEGIN
IF :NEW.x_ID IS NULL OR :NEW.x_ID < 0 THEN
SELECT x_ID_s.NEXTVAL
INTO :NEW.x_ID
FROM DUAL;
END IF;
END;
-- just get some data in
insert into x1 values (null, 'a');
insert into x1 (null, 'b');
commit;
validator
import javax.faces.application.FacesMessage;
import javax.faces.component.UIComponent;
import javax.faces.context.FacesContext;
import javax.faces.validator.ValidatorException;
public class Test {
public Test() {
public void description_validator(FacesContext facesContext,
UIComponent uiComponent, Object object) {
String myString = (String) object;
if (myString.equals("Z")) {
FacesMessage myFaceMsg = new FacesMessage("Do not use Z",
"Must enter something other Z.");
myFaceMsg.setSeverity(myFaceMsg.SEVERITY_ERROR);
throw new ValidatorException(myFaceMsg);
}Thanks for the quick reply. I have work on this a couple more hours this morning and still no luck. This can't be this complicated. I tried to set the refresh renderModel to ${!adfFacesContext.postback} and still no luck. I wasn't sure how to get the bindings.XId.inputValue < 0 in there as I kept getting coersion errors. I even tried to set it to no refresh and no luck. When I create the same type of scenario without the DBSequence I do not get the JBO-35007, so it has to be something in my entity object. Any other ideas? I guess I can redesign and use transient vo's, but that kind of defeats the purpose of all this cool ADF BC stuff. This is just a simple input form with some validation, I should be able to do this, right?
-
Unexpected error msg returned by stored procedure (called by 'C' program)
My 'C' code is calling an Oracle stored procedure that can either return a record or not ~ depending on if rows already exist having the existing coordinates. In this case, there are not any existing records so I would expect the stored procedure to return an error code of 100 ~ for "no rows found". Instead, it is returning ORA-21000: error number argument to raise_application_error of 100". Do I need to change my 'C' code to look for a return code of -21000 to represent "no rows found" from my stored procedure, or is error code 100 still what I should be checking for and I am encountering a different problem ?
VickiSo, are you trying to copy the error codes over from Sybase as well (i.e. an error code of 100 in your Sybase application translates to "no data found")?
RAISE_APPLICATION_ERROR allows you to raise custom errors, but the error numbers have to be in the range -20000 to -20999 (i.e. ORA-20000 through ORA-20999). You can use RAISE to re-raise Oracle's NO_DATA_FOUND message, though that won't match the error number 100 you're expecting. It would also be pointless to have an exception handler that just raises the same error again, so you'd want to remove the error handler entirely if it would just RAISE again.
Justin -
What is higher prio factory deffect or physical damage?
Hi all.
My question is following.
I cracked my screen but this screen had well known ghosting issue (burn-in, pixel retention).
In apple store they refer to some articles. One of them says
'Apple does not respond for internal damage caused by accident'
It is known that apple chage lcds in case of burn in. The guy from store said that because of crack
they will not change the screen that from the beginning was factory defect.
So if i bring that laptop with burn in defect but without crack they would change it, in case of crack
no.
I am not agree with that.
Best regards,
Vladimir.Liz, nice "seeing" you again. I always appreciate your help.
I hear what you're saying about a Nexus acting as an FCF, but I am not sure whether you're saying that a Nexus in NPV mode is considered a hop.
Anyway, I have heard this debate before on the blogosphere. Whether a device is considered a hop or not seems to be a point of contention. I am also reading INCITS BB5 in its totality, yet I dont see any definition of what is considered a hop. Albeit, I havent finished reading it yet.
In my humble opinion, it makes sense to me to think of an FCoE hop as being any DCB switch that is passing FCoE traffic and acting on a level higher than the PHY and MAC layers. For example, a hop would be a device that is aggregating FCoE traffic/FLOGIs from all the blades in the chassis, or performing FIP snooping, or changing the VN-port to VF-port constructs between the CNAs and the ToR FCF forwarder switch port – basically, a device that is acting on the FCoE traffic and changing the manner in which it is presented to the ToR switch port would make the device a “hop,” just like a Nexus in NPV mode. -
Error during log on to GUI 720
Hi Experts,
I am having problems logging on to my newly installed ERP (on my stand alone system via a virtual machine- Oracle virtual box) via gui 720, I keep getting the following message:
partner' 192.168.0.28' not reached
WSAECONNREFUSED
Regads.
Brynethere is no firewall on the server(it is a virtual machine) no antivirus is installed and windows firewall is turned off; i can successfully ping the IP.
Here are the last lines of the logs
dev.disp:
Fri Jun 03 13:13:58 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:13:59 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:00 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:01 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:02 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:03 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:04 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:05 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:06 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:07 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:08 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:09 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:10 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:11 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:12 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:13 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:14 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:15 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:30 2011
SoftCancel request for T15 U18 M0 received from IC_MAN
Fri Jun 03 13:14:36 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:37 2011
DpHdlDeadWp: restart wp (pid=2064) automatically
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:38 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 20:59:30 2011
DpSigInt: caught signal 2
DpHalt: shutdown server >ecc1_ECC_00 < (normal)
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes
Fri Jun 03 20:59:31 2011
Stop gateway
Stop icman
Terminate gui connections
wait for end of work processes
wait for end of gateway
waiting for termination of gateway ...
Fri Jun 03 20:59:32 2011
wait for end of icman
waiting for termination of icman ...
Fri Jun 03 20:59:33 2011
waiting for termination of icman ...
Fri Jun 03 20:59:34 2011
DpStartStopMsg: send stop message (myname is >ecc1_ECC_00 <)
DpStartStopMsg: stop msg sent
Fri Jun 03 20:59:35 2011
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
MBUF state OFF
MBUF component DOWN
cleanup EM
Fri Jun 03 20:59:37 2011
***LOG Q05=> DpHalt, DPStop ( 2812) [dpxxdisp.c 10371]
Dev-w0
M switch on control 0x40 for W11 (0x0 -> 0x40)
M switch on control 0x40 for W12 (0x0 -> 0x40)
B ***LOG BY4=> sql error 12571 performing SEL on table USR41 [dbtrtab#6 @ 3908] [dbtrtab 3908 ]
B ***LOG BY0=> ORA-12571: TNS:packet writer failure [dbtrtab#6 @ 3908] [dbtrtab 3908 ]
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThUsrDelEntry (*, *, ecc1_ECC_00 ) o.k.
M ThICommit3: full commit, set time, keep resources, redispatch
M ThICommit3: db unusable
M ThExecShutDown: ThUsrDelEntry o.k.
M ThExecShutDown: called rsau_log_system_stop
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20110603 131102 ECC1
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=000000000AB7F128,usrhp=00000000081D6428)
C Detaching from DB Server (con_hdl=0,svchp=000000000AB7F128,srvhp=0000000015DAF118)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=2310, com_tx=935)
B statistics db_con_rollback (roll_total=11, roll_tx=3)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 620) [dpnttool.c 327] -
Installation problem with SolMan on SUSE 9,0 / Oracle
Hi Experts,
I have just started to work with SAP environment. My first challenge is to install Solution Manager on SUSE 9.0 Linux. I have faced quite lot of error messages and managed to solve them with help of support and forum pages. But the last mile seems to be the hardest one. Installation stopped on phase 42 / 45 (Configure System Landscape Directory) with following errors:
WARNING 2007-02-08 09:18:13
Execution of the command "/usr/sap/HSM/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysnr=01 -c ashost=haukka -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SLDDSUSER -p XXXXXX -message_file UserCheck.message" finished with return code 4. Output:
Warning: tmpfs at /dev/shm is configured quite small with 1956 MB! Minimum value is 2048 MB.
Recommended size is 75 % of RAM + swap.
Warning: tmpfs at /dev/shm is configured quite small with 1956 MB! Minimum value is 2048 MB.
Recommended size is 75 % of RAM + swap.
Feb 8, 2007 9:18:10 AM Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Feb 8, 2007 9:18:11 AM Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=haukka SYSNR=01 GWHOST=haukka GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'haukka:sapgw01' not reached
TIME Thu Feb 8 09:18:11 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 2
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:456)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:922)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3171)
at com.sap.security.tools.UserCheck.main(UserCheck.java:172)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Feb 8, 2007 9:18:12 AM Info: Leaving with return code 4
INFO 2007-02-08 09:18:13
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
INFO 2007-02-08 09:18:13
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
ERROR 2007-02-08 09:18:13
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=haukka SYSNR=01 GWHOST=haukka GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'haukka:sapgw01' not reached
TIME Thu Feb 8 09:18:11 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 2
ERROR 2007-02-08 09:18:13
FCO-00011 The step createSLDDSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|createSLDDSUser was executed with status ERROR .
I have stopped the installation, rebooted the system and started the installation again. Well that didnt help at all. After that I have to start Oracle database and listener to proceed with old installation.
Can you give me any advices how to solve this problem and finish the installation?
Grateful for help.
JukkaHi Dolores,
Thank you for your advices.
I would appreciate further assistance with this problem because I couldnt work it out jet.
I logged in to the Visual Admin by using go file in usr/sap/HSM/DVEBMGS01/j2ee/admin.
The Visual Administrator screen is opening but I cannot connect in.
The error message popping up is "Cannot open connection on host xx.yy.xx.yy and port 50004".
The login parameters specified are:
Display name: j2ee
User name: Administrator / (J2EE_ADMIN)
Host: localhost
HTTP Port: 50004
Load balancing method: manual
Transport layer: default
I tried with two different username, see above.
I also tried DDIC user logon via ssh command in Shell console, but didnt succeed.
Here is the information in some of those files your mentioned:
trc file: "dev_rd", trc level: 1, release: "700"
Wed Jan 31 10:47:35 2007
***LOG S00=> GwInitReader, gateway started ( 19402) [gwxxrd.c 1677]
systemid 387 (Intel x86 with Linux)
relno 7000
patchlevel 0
patchno 46
intno 20050900
make: single threaded, Unicode, optimized
pid 19402
gateway runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
Wed Jan 31 10:47:37 2007
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Wed Jan 31 10:48:05 2007
Bind service sapgw01 (socket) to port 3301
Wed Jan 31 10:48:06 2007
GwPrintMyHostAddr: my host addresses are :
1 : [192.168.229.131] haukka (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
Wed Jan 31 10:48:07 2007
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Wed Jan 31 10:48:57 2007
DpShMCreate: sizeof(wp_adm) 12744 (1416)
DpShMCreate: sizeof(tm_adm) 4011160 (19956)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/520056/520064
DpShMCreate: sizeof(comm_adm) 520064 (1032)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (68)
DpShMCreate: sizeof(vmc_adm) 0 (1596)
DpShMCreate: sizeof(wall_adm) (38456/34360/80/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x457a0000, size: 4663248)
DpShMCreate: allocated sys_adm at 0x457a0000
DpShMCreate: allocated wp_adm at 0x457a1e88
DpShMCreate: allocated tm_adm_list at 0x457a5050
DpShMCreate: allocated tm_adm at 0x457a5080
DpShMCreate: allocated appc_ca_adm at 0x45b7f598
DpShMCreate: allocated comm_adm at 0x45b81b18
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x45c00a98
DpShMCreate: allocated gw_adm at 0x45c00ad8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x45c00b08
Wed Jan 31 10:48:58 2007
MtxInit: -2 0 0
Wed Jan 31 10:49:38 2007
GwDpInit: attached to gw_adm at 0x45c00ad8
Wed Jan 31 10:49:39 2007
***LOG Q0I=> NiIWrite: writev (32: Broken pipe) [nixxi.cpp 3797]
ERROR => NiIWrite: SiSendV failed for hdl 1 / sock 12
(SI_ECONN_BROKEN; UD; ST; 127.0.0.1:0) [nixxi.cpp 3797]
LOCATION SAP-Gateway on host haukka / sapgw01
ERROR connection to partner 'localhost:0' broken
TIME Wed Jan 31 10:49:39 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 3797
DETAIL NiIWrite
SYSTEM CALL writev
ERRNO 32
ERRNO TEXT Broken pipe
COUNTER 1
ERROR => GwIConnectHandle GwWrite failed (NIECONN_BROKEN) [gwxxrd.c 8689]
C-STACK -
(CTrcStack2+0x78)[0x80c1938]
(SigIGenAction+0x2d1)[0x81e9451]
[0xffffe440]
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Thu Feb 8 09:15:05 2007
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
SapSSLInit failed => https support disabled
Webservice thread started, listening on port 50013
Trusted http connect via Unix domain socket '/tmp/.sapstream50013' enabled.
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid HSM
systemid 387 (Intel x86 with Linux)
relno 7000
patchlevel 0
patchno 48
intno 20050900
make: single threaded, Unicode, optimized
pid 19381
Wed Jan 31 10:48:07 2007
CCMS: start to initalize 3.X shared alert area (first segment).
Wed Jan 31 10:48:10 2007
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 48
Release check o.K.
Wed Jan 31 10:49:57 2007
MBUF state ACTIVE
Wed Jan 31 10:50:11 2007
DpModState: change server state from STARTING to ACTIVE
Wed Jan 31 10:50:18 2007
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
For some reason the latest files are dated 1.2.2007?
Hopefully You can see the problem from this log file information.
As I mentioned earlier I am a green novice at SAP systems and Linux.
Best regards
Jukka -
Syntax Error while running step 34 (35) after unicode conversion
Hello,
We are converting our test system to Unicode to find out how to do it
in our production system. We are at step 34/35 (Starting RFC job's) in
the database installation so we are almost done but we have encounted a
problem that we can't find a solution to. The error log in Sapinst give this
information:
ERROR 2008-11-09 11:19:19 [iaxxrfcimp.cpp:1103] CAbRfcImpl::performFunctionCall FRF-00025 Unable to call function.
Error message: ?`>?/?????????>??????/_???&<?(????????????????????????????????????????????????? .
At the same time we can read the following text in dev_w1 (and dev_w0 and so on):
A *** ERROR => Syntax error in program SAPLBTCH [abgen.c 1388]
A *** ERROR => > Include LBTCHF39 line 173 [abgen.c 1390]
A *** ERROR => > Statement "âu2018âu2018âu2018âu2018âu2018IF" is not defined. Check your spelling. spelling. [abgen.c 1393]
The error don't always look the same, here is another example:
A *** ERROR => Syntax error in program SAPLSALC [abgen.c 1388]
A *** ERROR => > Include LSALCU54 line 55 [abgen.c 1390]
A *** ERROR => > No component exists with the name "MTSYSIDâu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". "MTSYSID [abgen.c 1393]
A *** ERROR => > âu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". [abgen.c 1395]
The common thing is Syntax error. If we try to log in to the system using SAP Gui we get this message: "Syntax error in program SAPMS380".
In the file dev_disp we can read a lot of these:
Tue Nov 11 14:06:32 2008
*** WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
But we should have enough WP since noone has loggen on to the system.
Facts:
Tue Nov 11 14:06:07 2008
kernel runs with dp version 138000(ext=102000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 524 bytes
sysno 60
sid S01
systemid 274 (HP (IA-64) with HP-UX)
relno 6400
patchlevel 0
patchno 258
intno 20020600
make: single threaded, Unicode, 64 bit
pid 20538
HPUX on Intel IA64 with Oracle 10.0.2.0.2
SAP ERP Central Component 5.0
SAP_ABA 640 0021 SAPKA64021
SAP_BASIS640 0021 SAPKB64021
Please let me know that there is some small setting that I can change to regenerate the programs or something like that...
Br Linus HellsingHello Ralph
Here they are:
TOC files
SAPAPPL0.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL0.001 1024
SAPAPPL1.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL1.001 1024
EXPORT log:
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110703
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL0".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(GSI) INFO: dbname = "S0120081016081020 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno = "1220008646"
(EXP) TABLE: "/BDL/LOCK"
(EXP) TABLE: "/BEV1/BO_CONT"
(EXP) TABLE: "/BEV1/BO_ENQUEUE"
(EXP) TABLE: "/BEV1/CLCONT1"
(EXP) TABLE: "/BEV1/CLDEB"
and so on
(EXP) TABLE: "ADR9S2"
(CNV) WARNING: code page conversion problem
Number of substitutions: 4
(row 30 of current buffer, table ADRC)
CLIENT 30 30 30 |000 |
ADDRNUMBER 30 30 30 30 30 31 34 38 36 39 |0000014869 |
DATE_FROM 30 30 30 31 30 31 30 31 |00010101 |
NATION 20 | |
(CNV) WARNING: code page conversion problem
Number of substitutions: 2
(row 41 of current buffer, table ADRC)
CLIENT 30 30 30 |000 |
ADDRNUMBER 30 30 30 30 30 32 31 39 38 32 |0000021982 |
DATE_FROM 30 30 30 31 30 31 30 31 |00010101 |
NATION 20 | |
(RSCP) INFO: 51 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRC"
(RSCP) INFO: 3 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRCOMC"
and then its the same with table SETHEADERT and SKAT and SNAP and STXH.
I will not include the whole file as it is 14213 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110701
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL1".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(GSI) INFO: dbname = "S0120081016081020 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno = "1220008646"
(EXP) TABLE: "/BDL/ADDONKEYS"
(EXP) TABLE: "/BDL/BADHOST"
and so on until
(EXP) TABLE: "SEWADATCOL"
(EXP) TABLE: "SFHX"
(CNV) WARNING: code page conversion problem
Number of substitutions: 1
(row 3519 of current buffer, table SFIWP)
LANGU 4a |J |
WORDF 82 41 45 82 a8 82 ad 95 4b 97 56 82 aa 82 a0 82 |.AE.¨..K.V.ª. .|
WORDF c8 82 55 45 82 b7 81 42 20 20 20 20 20 20 20 20 |È.UE.·.B |
WORDF 20 20 20 20 20 20 20 20 | |
and table STERM_TEXT. As before I will not include it all, the log file is 7775 lines long.
IMPORT log
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102704
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102705
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/LOCK created #20081106103642
(IMP) INFO: import of /BDL/LOCK completed (0 rows) #20081106103642
(DB) INFO: /BDL/LOCK~0 created #20081106103642
(DB) INFO: /BEV1/BO_CONT created #20081106103642
and so on until the end:
(DB) INFO: ZWF_STATUSCHANGE created #20081106173307
(IMP) INFO: import of ZWF_STATUSCHANGE completed (0 rows) #20081106173307
(DB) INFO: ZWF_STATUSCHANGE~0 created #20081106173307
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106173307
/sapmnt/S01/exe/R3load: START OF LOG: 20081107092517
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107092541
/sapmnt/S01/exe/R3load: START OF LOG: 20081107111014
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107111041
The log file is 81163 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102703
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/ADDONKEYS created #20081106103603
(IMP) INFO: import of /BDL/ADDONKEYS completed (0 rows) #20081106103603
(DB) INFO: /BDL/ADDONKEYS~0 created #20081106103603
(DB) INFO: /BDL/BADHOST created #20081106103603
(IMP) INFO: import of /BDL/BADHOST completed (0 rows) #20081106103603
(DB) INFO: /BDL/BADHOST~0 created #20081106103603
And so on until the end:
(DB) INFO: ZWF_INVH created #20081107211801
(IMP) INFO: import of ZWF_INVH completed (116640 rows) #20081107211817
(DB) INFO: ZWF_INVH~0 created #20081107211818
(DB) INFO: ZWF_INVI created #20081107211818
(IMP) INFO: import of ZWF_INVI completed (20557 rows) #20081107211820
(DB) INFO: ZWF_INVI~0 created #20081107211820
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107211820
The log file is 52583 lines long.
There are 55 import log files and 28 export log files.
I hope some of this information is helpful for you and thank you again for your assistance!
Br Linus Hellsing -
I upgraded ERP SR2 kernel level 114 from 111 so now in dispatcher the message is "dispatcher started but dialog queue in standstill"
dev-disp:
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
I increased the no of dialog workprocess and reduced abap/buffer as well but went in vain.dev_disp:-
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DEV
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 114
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3948
Tue Jan 15 16:08:20 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3948) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 114 successfully loaded
shared lib "dw_xtc.dll" version 114 successfully loaded
shared lib "dw_stl.dll" version 114 successfully loaded
shared lib "dw_gui.dll" version 114 successfully loaded
shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Jan 15 16:08:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MRVdev_DEV_00 <
DpShMCreate: sizeof(wp_adm) 22208 (1480)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F280050, size: 6278096)
DpShMCreate: allocated sys_adm at 000000000F280050
DpShMCreate: allocated wp_adm at 000000000F282150
DpShMCreate: allocated tm_adm_list at 000000000F287810
DpShMCreate: allocated tm_adm at 000000000F287870
DpShMCreate: allocated wp_ca_adm at 000000000F7DAF40
DpShMCreate: allocated appc_ca_adm at 000000000F7E0D00
DpShMCreate: allocated comm_adm at 000000000F7E2C40
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F8698D0
DpShMCreate: allocated gw_adm at 000000000F869950
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F869980
DpShMCreate: allocated wall_adm at 000000000F869990
Tue Jan 15 16:08:25 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( MRVdev) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >MRVdev_DEV_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Tue Jan 15 16:08:33 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Tue Jan 15 16:08:34 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Tue Jan 15 16:24:54 2008
DpSigInt: caught signal 2
DpHalt: shutdown server >MRVdev_DEV_00 < (normal)
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes
Tue Jan 15 16:24:55 2008
Stop gateway
Stop icman
Terminate gui connections
wait for end of work processes
wait for end of gateway
waiting for termination of gateway ...
Tue Jan 15 16:24:56 2008
wait for end of icman
waiting for termination of icman ...
Tue Jan 15 16:24:57 2008
waiting for termination of icman ...
Tue Jan 15 16:24:58 2008
waiting for termination of icman ...
Tue Jan 15 16:24:59 2008
waiting for termination of icman ...
Tue Jan 15 16:25:00 2008
waiting for termination of icman ...
Tue Jan 15 16:25:01 2008
waiting for termination of icman ...
Tue Jan 15 16:25:02 2008
waiting for termination of icman ...
Tue Jan 15 16:25:03 2008
waiting for termination of icman ...
Tue Jan 15 16:25:04 2008
waiting for termination of icman ...
Tue Jan 15 16:25:05 2008
DpStartStopMsg: send stop message (myname is >MRVdev_DEV_00 <)
DpStartStopMsg: stop msg sent
Tue Jan 15 16:25:06 2008
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
MBUF state OFF
MBUF component DOWN
cleanup EM
***LOG Q05=> DpHalt, DPStop ( 3948) [dpxxdisp.c 10371]
dev_w0:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Jan 15 16:08:25 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\DEV\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\DEV\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\DEV\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.109)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 114
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2416
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2416) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Tue Jan 15 16:08:26 2008
M DpShMCreate: sizeof(wp_adm) 22208 (1480)
M DpShMCreate: sizeof(tm_adm) 5584592 (27784)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F280050, size: 6278096)
M DpShMCreate: allocated sys_adm at 000000000F280050
M DpShMCreate: allocated wp_adm at 000000000F282150
M DpShMCreate: allocated tm_adm_list at 000000000F287810
M DpShMCreate: allocated tm_adm at 000000000F287870
M DpShMCreate: allocated wp_ca_adm at 000000000F7DAF40
M DpShMCreate: allocated appc_ca_adm at 000000000F7E0D00
M DpShMCreate: allocated comm_adm at 000000000F7E2C40
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F8698D0
M DpShMCreate: allocated gw_adm at 000000000F869950
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F869980
M DpShMCreate: allocated wall_adm at 000000000F869990
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host MRVdev
M
M Tue Jan 15 16:08:27 2008
M calling db_connect ...
C Thread ID:2412
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\DEV\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 110
C patchcomment MSSQL: Connect error handling (1053754)
C np:(local) connection used on MRVDEV
C CopyLocalParameters: dbuser is 'dev'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Tue Jan 15 16:08:28 2008
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 500 dynamic statements (2876000 bytes), total 35836104 bytes
C Using shared procedure name cache MRVDEV_DEVDEV_DEV_MEM initialized by another process.
C Connected to db server : [MRVDEV] server_used : [np:(local)], dbname: DEV, dbuser: dev
C pn_id:MRVDEV_DEVDEV_DEV
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080115 160827 MRVDEV
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jan 15 16:08:31 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 000000001BC30050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFED0E0050, size: 61440000)
M SHM_PAGING_AREA (addr: 000000001C070050, size: 32768000)
M SHM_ROLL_ADM (addr: 000000001DFC0050, size: 615040)
M SHM_PAGING_ADM (addr: 000000001E060050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001E0F0050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000001E180050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 15, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000236B0160, size: 30000000, end: 000000002534C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000025350160, size: 10240000, end: 0000000025D14160)
B dbexpbuf: Buffer EIBUF (addr: 0000000025D30170, size: 4194304, end: 0000000026130170)
B dbexpbuf: Buffer ESM (addr: 0000000026140170, size: 4194304, end: 0000000026540170)
B dbexpbuf: Buffer CUA (addr: 0000000026550170, size: 3072000, end: 000000002683E170)
B dbexpbuf: Buffer OTR (addr: 0000000026840170, size: 4194304, end: 0000000026C40170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Tue Jan 15 16:08:32 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000013912930
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002FFE00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002FFE0580
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 9288kb, dir_size: 9228kb.
A Attached to PXA (address 000007FFF0B80050, size 250000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FEEA000 leng=20955136 end=000007FF512E6000)
A >> Shm MMADM area (addr=000007FF503C3ED0 leng=244096 end=000007FF503FF850)
A >> Shm MMDAT area (addr=000007FF50400000 leng=15622144 end=000007FF512E6000)
A RFC Destination> destination MRVdev_DEV_00 host MRVdev system DEV systnr 0 (MRVdev_DEV_00)
A RFC Options> H=MRVdev,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 15838 bytes at 0000000030150050
N
N Tue Jan 15 16:08:33 2008
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\DEV\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\DEV\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Tue Jan 15 16:08:36 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.114.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
C
C Tue Jan 15 16:10:03 2008
C The IRow interface is supported by this OLEDB provider
M
M Tue Jan 15 16:24:54 2008
M in_ThErrHandle: 1
M ThResetEmMagic: reset em magic for T15/M0/I1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M invalidate act fields from T15/M0
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (25104 bytes) to local buf
M PfWriteIntoFile: write 25104 bytes into stat-file
M PfWriteIntoFile: writing Index
M min. start :1200393513/517503
M min. end :1200393513/619030
M max. end :1200394485/667609
M wpid :-1
M tasktypes :51324
M max. resp :8557745
M max. cpu :203125
M max.db
M no. of recs :125
M no. of bytes :25104
M PfWriteIntoFile: updated fileindex for file stat.DAT with endtime 1200394485 (15:1:2008 10:54:45)
M PfWriteIntoFile: updated fileindex
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: wrote buffer to file
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES YES NO 000 255 255 20080115 160827 MRVDEV
B Disconnected from connection 0
B statistics db_con_commit (com_total=5, com_tx=0)
B statistics db_con_rollback (roll_total=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2416) [dpnttool.c 327] -
Unable to start the SAP instance - work processes are terminated
Hello,
We are implementing SAP ECC 6.0 on iSeries, i5/OS V5R4.
The application server & the database server are implemented on one centralized physical iSeries server.
We recently attempted to copy one SAP system (DEV) from one iSeries server to another, through restoring from an Entire System backup.
After successfully conducting the restore onto the new (destination) iSeries server, and conducting all the necessary host name changes to be the same as the host name of the source system, we encountered a problem when trying to start the SAP : all the jobs under sub-system R3_00 are started, except the jobs constituting the SAP work processes; i.e. WP00, WP01, etc.
The following is the file holding the SAP start log :
/usr/sap/<SID>/DVEBMGS00/work/sapstart.log
SAP-R/3-Startup Program Rel 700 V1.8 (2003/04/24)
Starting at 2008/04/07 13:55:49
Startup Profile: "/usr/sap/PRO/SYS/profile/START_DVEBMGS00_MASAPPRO"
Execute Pre-Startup Commands
(47) Local: /usr/sap/PRO/SYS/exe/run/cleanipc 00 remove
(47) Executing "/usr/sap/PRO/SYS/exe/run/cleanipc 00 remove"...
(47) Okay!
(47) Local: CLRLIB LIB(R3WRK00)
(47) Executing CL command "CLRLIB LIB(R3WRK00)"...
(47) Okay!
(47) Local: /usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n
(47) Executing "/usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n"...
(47) Okay!
Starting Programs
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/saposcol" asynchronously...
(47) Okay, child's pid=52.
(52) Starting: local /usr/sap/PRO/SYS/exe/run/saposcol
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=53.
(53) Starting: local /usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=54.
(54) Starting: local /usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=55.
(55) Starting: local /usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=56.
(56) Starting: local /usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=57.
(57) Starting: local /usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Waiting for Child Processes to terminate.
(47) **** 2008/04/07 13:55:56 Child 53 terminated with Status 0 . ****
(47) **** 2008/04/07 13:56:25 Child 54 terminated with Status 0 . ****
Thank you in advance for your cooperation.
Best regards.
Reda KhalifaHello,
I did delete all the SAP-related SQL Packages, using the command : DLTR3PKG, then IPL the server, then try to start the SAP system, but with no success (the same previous status)
As per your request, the following are contents of the four log files :
dev_disp.new, dev_disp, dev_w0, dev_rd :
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 52
Tue Apr 8 13:47:32 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 52) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
WARNING => DpNetCheck: NiServToNo(sapdp00) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
Tue Apr 8 13:47:33 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed ((null)--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:43 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Apr 8 11:47:43 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
17 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
18 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
19 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
20 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
21 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
22 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
23 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
24 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
25 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
26 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
27 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
28 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
29 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
30 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
31 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
32 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
33 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
34 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Tue Apr 8 11:47:43 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 2032]
Dump of tm_adm structure: Tue Apr 8 11:47:43 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Apr 8 11:47:43 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:48 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >MASAPPRO_PRO_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x1808c5508 )
ShmKeyPermission( 76 ) = 0777 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 1, 3 )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x700000070000000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 2, 3 )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x700000080000000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x700000090000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 4 ) = 0777 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 14 ) = 0777 (octal)
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 11 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 19 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 33 ) = 0777 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 41 ) = 0777 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 42 ) = 0777 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 43 ) = 0777 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 45 ) = 0777 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 44 ) = 0777 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 54 ) = 0777 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 46 ) = 0777 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 47 ) = 0777 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 64 ) = 0777 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 65 ) = 0777 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 9 ) = 0777 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 8 ) = 0777 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 17 ) = 0777 (octal)
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 18 ) = 0777 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 6 ) = 0777 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 34 ) = 0777 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 58 ) = 0777 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 7 ) = 0777 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 40 ) = 0777 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 76 ) = 0777 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 51 ) = 0777 (octal)
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 77 ) = 0777 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 78 ) = 0777 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 52, 3 )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x7000000a0000000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 30 ) = 0777 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 70 ) = 0777 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 56 ) = 0777 (octal)
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 10 ) = 0777 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x700000020000000 )
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0xfffffffffffe900 )
ShmKeyPermission( 62 ) = 0777 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
Sem2Lock: LockObjPtr = 0x700000030000158, Yield = 1
ERROR => e=2 semctl(4,0,IPC_RMID,..) (2: No such file or directory) [semux.c 2098]
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0xfffffffffffe910 )
ShmKeyPermission( 31 ) = 0777 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 52) [dpxxdisp.c 10594]
shutdown completed - server stopped ***
Good Bye .....
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 9197
Thu Jan 31 05:54:08 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 9197) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Jan 31 05:54:09 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0x7000000d0000000
EsStdInit: Extended Memory 12288 MB allocated
<ES> 3071 blocks reserved for free list.
ES initialized.
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:47 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:49 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:51 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:53 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:00 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:02 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:03 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:06 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:08 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:13 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:21 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:23 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:25 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:28 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:30 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:32 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( MASAPPRO) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >MASAPPRO_PRO_00 <)
DpStartStopMsg: start msg sent
Thu Jan 31 05:55:32 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:34 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 98
Release check o.K.
Thu Jan 31 05:56:06 2008
MBUF state ACTIVE
Thu Jan 31 05:56:07 2008
DpModState: change server state from STARTING to ACTIVE
Thu Jan 31 05:57:28 2008
change reqtype of W0 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 0DIABTC) [dpxxdisp.c 13661]
change reqtype of W1 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 1DIABTC) [dpxxdisp.c 13661]
Thu Jan 31 08:00:55 2008
change reqtype of W0 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 0BTCDIA) [dpxxdisp.c 13661]
change reqtype of W1 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 1BTCDIA) [dpxxdisp.c 13661]
Thu Jan 31 08:44:38 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 12 / sock 19
(SI_ECONN_BROKEN/73; I4; ST; 10.2.4.135:1179) [nixxi.cpp 4248]
Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T42 is 10.2.4.135(10.2.4.135)
***LOG Q04=> DpRTmPrep, NiBufReceive (347 ALSALI 42 training4 ) [dpxxdisp.c 11375]
RM-T42, U347, 900 ALSALI, training4, 08:44:28, M0, W1, SBWP, 2/1
Thu Jan 31 09:09:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 77 / sock 84
(SI_ECONN_BROKEN/73; I4; ST; 10.2.3.76:1233) [nixxi.cpp 4248]
Network error of client T109, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T109 is 10.2.3.76(10.2.3.76)
***LOG Q04=> DpRTmPrep, NiBufReceive (462 ASEDKY 109 amrsedke ) [dpxxdisp.c 11375]
RM-T109, U462, 900 ASEDKY, amrsedke, 08:49:14, M0, W1, VA05, 2/1
Thu Jan 31 09:55:17 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 49 / sock 56
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.50:1158) [nixxi.cpp 4248]
Network error of client T81, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T81 is 10.2.14.50(10.2.14.50)
***LOG Q04=> DpRTmPrep, NiBufReceive (364 MHASSAN 81 Motazhassan ) [dpxxdisp.c 11375]
RM-T81, U364, 900 MHASSAN, Motazhassan, 09:54:12, M1, W6, , 4/2
Thu Jan 31 09:55:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 108 / sock 51
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.52:1158) [nixxi.cpp 4248]
Network error of client T168, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T168 is 10.2.14.52(10.2.14.52)
***LOG Q04=> DpRTmPrep, NiBufReceive (1380 MKADY 168 AtaFathy ) [dpxxdisp.c 11375]
RM-T168, U1380, 900 MKADY, AtaFathy, 09:54:12, M0, W3, ZSDS, 2/2
Thu Jan 31 10:01:29 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 122 / sock 129
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.53:1144) [nixxi.cpp 4248]
Network error of client T67, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T67 is 10.2.14.53(10.2.14.53)
***LOG Q04=> DpRTmPrep, NiBufReceive (1230 MALGOHARY 67 Mohamedelgoh) [dpxxdisp.c 11375]
RM-T67, U1230, 900 MALGOHARY, Mohamedelgohary, 09:41:13, M0, W2, FBCJ, 2/1
Thu Jan 31 10:21:30 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 100 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T100, U402, 900 EABDELHAKAM, EmanHakam, 10:00:29, M1, W1, , 3/1
Thu Jan 31 10:25:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 65 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T65, U1129, 900 MSAAD, MOHAMMEDSAAD, 10:04:38, M0, W6, , 2/0
Thu Jan 31 10:27:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 189 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T189, U1638, 000 , MaryRose2, 10:06:37, M0, W5, SESS, 2/0
Thu Jan 31 11:01:54 2008
SoftCancel request for T107 U2249 M1 received from REMOTE_TERMINAL
Thu Jan 31 11:05:12 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 188 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T188, U2347, 900 MABDELGHANY, ManStore, 10:43:54, M0, W10, , 2/0
Thu Jan 31 11:12:30 2008
Network error of client T190, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T190 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2917 HAEZZ 190 hanyezzeldin) [dpxxdisp.c 11375]
RM-T190, U2917, 900 HAEZZ, hanyezzeldin, 11:12:18, M0, W3, VELO, 2/1
Thu Jan 31 11:13:14 2008
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 38334
-IN-- req_info LOGOFF CANCELMODE
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
Thu Jan 31 11:13:15 2008
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk 4 wp_id 0
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 40183
-IN-- req_info LOGOFF CANCELMODE
Thu Jan 31 11:16:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 57 / sock 64
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.139:1185) [nixxi.cpp 4248]
Network error of client T86, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T86 is 10.2.7.139(10.2.7.139)
***LOG Q04=> DpRTmPrep, NiBufReceive (834 RMOAWAD 86 roshdimoawad) [dpxxdisp.c 11375]
RM-T86, U834, 900 RMOAWAD, roshdimoawad, 10:56:06, M1, W12, FBL5, 3/2
Thu Jan 31 11:19:13 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 105 / sock 112
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.120:1207) [nixxi.cpp 4248]
Network error of client T143, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T143 is 10.2.7.120(10.2.7.120)
***LOG Q04=> DpRTmPrep, NiBufReceive (552 IFEKRY 143 ibrahimfekry) [dpxxdisp.c 11375]
RM-T143, U552, 900 IFEKRY, ibrahimfekry, 11:19:06, M0, W1, FB01, 3/1
Thu Jan 31 11:56:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:43 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:46 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:57:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:14 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:41 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:47 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:49 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:53 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:02 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:03 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:04 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:05 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:07 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:08 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:09 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:12 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:15 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:20 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:19:50 2008
DpHdlDeadWp: restart wp (pid=9213) automatically
Thu Jan 31 12:19:56 2008
Network error of client T180, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Thu Jan 31 12:19:56 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:19:57 2008
Client address of T180 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2942 HAEZZ 180 hanyezzeldin) [dpxxdisp.c 11375]
RM-T180, U2942, 900 HAEZZ, hanyezzeldin, 11:51:33, M0, W0, VELO, 2/1
Thu Jan 31 12:19:58 2008
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6908]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id REMOTE_TERMINAL tid 180 wp_ca_blk 5 wp_id -1
-IN-- action SEND_TO_WP uid 2942 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 375 rq_id 49950
Thu Jan 31 12:21:27 2008
ERROR => W0 (pid 9340) died [dpxxdisp.c 14319]
Thu Jan 31 12:21:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:30:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 52 / sock 158
(SI_ECONN_BROKEN/73; I4; ST; 10.2.5.110:1255) [nixxi.cpp 4248]
Network error of client T113, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T113 is 10.2.5.110(10.2.5.110)
***LOG Q04=> DpRTmPrep, NiBufReceive (2713 MMAGDY 113 MOHAMEDMAGDI) [dpxxdisp.c 11375]
RM-T113, U2713, 900 MMAGDY, MOHAMEDMAGDI, 12:27:33, M1, W8, FB1D, 4/2
Thu Jan 31 12:39:20 2008
SoftCancel request for T117 U2416 M1 received from REMOTE_TERMINAL
Thu Jan 31 12:54:32 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:56:17 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:59:34 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 108 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T108, U4450, 900 EABDELHAKAM, EmanHakam, 12:38:22, M0, W7, FTR0, 2/2
Thu Jan 31 13:06:12 2008
ERROR => DpRqCheck: T162 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198] -
ERROR disp+work.exe WSAECONNRESET: Connection reset by peer
Hi,
I've a Netweaver 2004s installed on Windows 2003 Server and SQL Server. The name of the amchine is solution and the domain where it's on is grupotec.local, so when I start it from SAP MMC, the dispatcher appears with yellow colour. When I read the trace, an error appears:
Wed Apr 16 18:10:18 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4361]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1484
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1460) [nixxi.cpp 4361]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4912)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
***LOG Q0I=> NiPGetHostByName: hostname 'solution.gruposap.local' not found: gethostbyname (11004: WSANO_DATA: Valid name, no data record of requested type) [ninti.c 320]
Wed Apr 16 18:10:19 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Apr 16 18:10:20 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Apr 16 18:10:21 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Apr 16 18:10:22 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Wed Apr 16 18:10:23 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
The abap stack works fine, I'm able to logon and work with the system BUT the java stack doesn't work. I've looking for this error in SAP Notes page, SDN portal,... also I've revised:
-file host, located C:\WINDOWS\system32\drivers\etc contains a line 192.168.100.42 solution.grupotec.local SAPTRANSHOST and the last line of this file is in blank
this machine was in domain 'solution.gruposap.local' and now is in the domain solution.grupotec.local
In order to solve it, I've chequed:
-SQL Server 2003 is up and running
-I've taken out and in the machine from the domain
-I've turned off the machine in order it refresh the new domain(solution.grupotec.local )
-Filesystem has enough free space
-I've updated SAP Kernel
Please could you help me?
Thanks and regardsHi,
full computer name:solution.grupotec.local
domain:grupotec.local
SID:SOL
DBSID:SOLUTION
number SOL instances:
C:\usr\sap\SOL\DVEBMGS01
C:\usr\sap\SOL\SCS00
DEFAULT.PFL:
j2ee/dbtype mss
j2ee/dbhost SOLUTION
j2ee/dbname SOL
SAPSYSTEMNAME SOL
SAPGLOBALHOST SOLUTION
j2ee/scs/host SOLUTION
j2ee/scs/system 00
j2ee/ms/host SOLUTION
j2ee/ms/port 3900
rdisp/bufrefmode sendoff,exeoff
rdisp/mshost SOLUTION
rdisp/msserv sapmsSOL
rdisp/msserv_internal 3901
login/system_client 001
SAPDBHOST SOLUTION
dbms/type mss
dbs/mss/server SOLUTION
dbs/mss/dbname SOL
dbs/mss/schema sol
About message server:
in the file services(C:\WINDOWS\system32\drivers\etc):
sapmsSOL 3601/tcp # SAP System Messaging Service Port
and when I type command netstat:
C:\Documents and Settings\soladm.SOLUTION>netstat -a
Active Connections
Proto Local Address Foreign Address State
TCP solution:epmap solution.grupotec.local:0 LISTENING
TCP solution:microsoft-ds solution.grupotec.local:0 LISTENING
TCP solution:1031 solution.grupotec.local:0 LISTENING
TCP solution:ms-sql-s solution.grupotec.local:0 LISTENING
TCP solution:sapdp00 solution.grupotec.local:0 LISTENING
TCP solution:sapmsSOL solution.grupotec.local:0 LISTENING
TCP solution:3901 solution.grupotec.local:0 LISTENING
and log for message server, the file C:\usr\sap\SOL\DVEBMGS01\work\dev_ms:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 3528] Fri Apr 18 12:28:32 2008
[Thr 3528] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, optimized
pid 144
[Thr 3528] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 144) [msxxserv.c 1824]
[Thr 3528] load acl file = C:\usr\sap\SOL\SYS\global\ms_acl_info.DAT
[Thr 3528] MsGetOwnIpAddr: my host addresses are :
[Thr 3528] 1 : [192.168.100.42] solution.grupotec.local (HOSTNAME)
[Thr 3528] 2 : [127.0.0.1] solution.grupotec.local (LOCALHOST)
[Thr 3528] MsHttpInit: full qualified hostname = solution.grupotec.local
[Thr 3528] HTTP logging is switch off
[Thr 3528] set HTTP state to LISTEN
[Thr 3528] MsHttpOwnDomain: own domain[1] = grupotec.local
[Thr 3528] ms/icf_info_server : deleted
[Thr 3528] *** I listen to port sapmsSOL (3601) ***
[Thr 3528] *** I listen to internal port 3901 (3901) ***
[Thr 3528] *** HTTP port 8101 state LISTEN ***
[Thr 3528] CUSTOMER KEY: >M0059840091<
[Thr 3528] Fri Apr 18 12:28:55 2008
[Thr 3528] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
[Thr 3528] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
Edited by: Raul Aguilar on Apr 18, 2008 1:21 PM -
Java problem - J2EE status info unavailable
Hi
( Environment: ECC6 patched to NW SP16 / Unicode / 700 Kernel patch 173 / Dbserver=DB2/400 )
When I start the Application server instance (Windows) with J2EE after applying SP16 of JSPM support package patches, the disp+work.exe on the System Management console has a yellow light and status of :
Running, message server connection ok; dialog queue time 0.00sec; J2EE status info unavailable.
The dev_jcontrol trace file has the error messages:
trc file: "U:\usr\sap\WFD\D00\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 2308
system name : WFD
system nr. : 00
started at : Thu Sep 25 15:46:00 2008
arguments :
arg[00] : U:\usr\sap\WFD\D00\exe\jcontrol.EXE
arg[01] : pf=
sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=64990
arg[04] : -DSAPSYSTEM=00
arg[05] : -DSAPSYSTEMNAME=WFD
arg[06] : -DSAPMYNAME=dfbhl6_WFD_00
arg[07] : -DSAPPROFILE=
sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 2040] Thu Sep 25 15:46:00 2008
[Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c 841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c 841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c 841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
[Thr 2040] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 3504] JControlDPMessageProxy: Thread 3504 started as handler thread for R/3 dispatcher messages.
[Thr 2040] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 2040] JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
[Thr 2040] JControlCheckRunMode: run mode of the instance = safe
[Thr 2040] Instance is disabled -> terminate.
[Thr 2040] JControlCloseProgram: started (exitcode = -11113)
[Thr 2040] JControlCloseProgram: good bye... (exitcode = -11113)
Any ideas what is wrong? Have tried restarting the Application server.
regards
Michael.Hi,
*I am too getting the following error "Running, message server connection ok; dialog queue time 0.00sec; J2EE status info unavailable."*
the trace is as follows. Kindly help
thanks
Denis.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid DM0
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 2228
Fri Nov 20 15:43:45 2009
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2228) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Fri Nov 20 15:43:50 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapserver_DM0_01 <
DpShMCreate: sizeof(wp_adm) 14080 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05DC0040, size: 4608920)
DpShMCreate: allocated sys_adm at 05DC0040
DpShMCreate: allocated wp_adm at 05DC1E28
DpShMCreate: allocated tm_adm_list at 05DC5528
DpShMCreate: allocated tm_adm at 05DC5558
DpShMCreate: allocated wp_ca_adm at 0618AAF0
DpShMCreate: allocated appc_ca_adm at 061908B0
DpShMCreate: allocated comm_adm at 061927F0
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 062136B0
DpShMCreate: allocated gw_adm at 062136F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06213720
DpShMCreate: allocated wall_adm at 06213728
Fri Nov 20 15:43:51 2009
MBUF state OFF
Fri Nov 20 15:43:53 2009
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1022 blocks reserved for free list.
ES initialized.
Fri Nov 20 15:43:54 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2724
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1044
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
Fri Nov 20 15:43:55 2009
***LOG Q0K=> DpMsAttach, mscon ( sapserver) [dpxxdisp.c 11414]
Fri Nov 20 15:43:56 2009
DpStartStopMsg: send start message (myname is >sapserver_DM0_01 <)
DpStartStopMsg: start msg sent
Fri Nov 20 15:43:57 2009
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Nov 20 15:44:00 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
Fri Nov 20 15:44:01 2009
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Fri Nov 20 15:44:37 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:44:57 2009
J2EE server info
start = TRUE
state = STARTED
pid = 1064
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1081
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:45:17 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:45:37 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2656
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1107
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:45:57 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:46:19 2009
J2EE server info
start = TRUE
state = STARTED
pid = 1428
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1113
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:46:37 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:46:46 2009
MBUF state ACTIVE
Fri Nov 20 15:46:53 2009
DpModState: change server state from STARTING to ACTIVE
Fri Nov 20 15:46:57 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3192
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1131
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:47:17 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:47:37 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3180
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1141
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:47:57 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:48:08 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 15:48:17 2009
J2EE server info
start = TRUE
state = STARTED
pid = 952
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1147
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:48:37 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:48:58 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3192
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1156
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:49:17 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:49:37 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3660
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1164
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:50:01 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:50:21 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2208
argv[0] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DM0\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1171
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DM0
argv[7] = -DSAPMYNAME=sapserver_DM0_01
argv[8] = -DSAPPROFILE=D:\usr\sap\DM0\SYS\profile\DM0_DVEBMGS01_sapserver
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Nov 20 15:50:41 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Nov 20 15:51:01 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Fri Nov 20 15:59:24 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 15:59:25 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 15:59:45 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 15:59:46 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
SoftCancel request for T16 U19 M0 received from IC_MAN
Fri Nov 20 15:59:51 2009
SoftCancel request for T15 U18 M0 received from IC_MAN
Fri Nov 20 15:59:52 2009
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6815]
Fri Nov 20 15:59:56 2009
SoftCancel request for T14 U17 M0 received from IC_MAN
Fri Nov 20 16:01:09 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 16:01:10 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 16:01:15 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 16:01:16 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 16:01:17 2009
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Nov 20 16:01:18 2009
SoftCancel request for T16 U22 M0 received from IC_MAN
Fri Nov 20 16:01:23 2009
SoftCancel request for T15 U21 M0 received from IC_MAN
Fri Nov 20 16:01:28 2009
SoftCancel request for T14 U20 M0 received from IC_MAN
Fri Nov 20 16:01:29 2009
ERROR => DpRqCheck: T14 in state TM_SLOT_FREE [dpxxdisp.c 6753]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5104]
Fri Nov 20 16:01:30 2009
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5901): [dpxxdisp.c 5106]
-IN-- sender_id DISPATCHER tid 14 wp_ca_blk 50 wp_id 1
-IN-- action SEND_TO_WP uid 20 appc_ca_blk -1 type DIA
-IN-- new_stat WP_WAIT mode 0 len 672 rq_id 527
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH
Maybe you are looking for
-
How do I get a refund on a song that stop loading on my IPad?
Money Missing for my iTunes acct. how do I fine out why?
-
<h1> Please comment on the client code </h1> Need Expert comments for the WS that I have created, deployed and consumed. I am learning webservices. I need somebody "expert at Webservices" to have a look at the client I have written and tell me if it
-
Nokia n95 maps licence problem and gps not working
hi i have n95 and i formated it all and it's mass memory, now when i open maps i don't find my license, also i can't update it, i can't dowload maps for my phone, so i can't navigate without internet, also gps lock not working and when i use pc suit
-
Can I crop painted lines in Illustrator using pathfinder?
Hi everyone, This is a question from a total Illustrator newbie but I've been Googling like mad to no avail, so any help would be much appreciated! I'm experimenting with creating seamless patterns using shapes. I know how to crop shapes using the pa
-
10.4.6 Updated, Mac OS X Setup Assistant Launches?
Anyone know why the OS X Setup Assistant launched? It launched as an app, in an inset window, while the rest of the iMac ran as-normal. It reminded me of how Classic runs on Macs that can still use it - an inset window holding the app. After looking