Warning: NT_GWINDOWS section found
Hello All,
Can someone explain to me the signifigance of the following dbx warning:
dbx: warning: NT_GWINDOWS section found. Possible stack overflow condition
Specifically, could this warning have any bearing on the accuracy of a core files stack trace?
Thanks in advance.
I suspect that if a frame shows up in the stack trace it will be accurately reported. The kinds of problems you might see would be missing stack frames at the top of the stack. In other words the most recent few frames might be missing. You might try using the 'pstack' command on the core file, it might do a better job of handling the NT_GWINDOWS data.
Similar Messages
-
'no loadable sections found in added symbol-file system-supplied DSO'
Hi,
I installed eclipse today and tried to run a hello-world C++ code, and it always gave me the warning:
no loadable sections found in added symbol-file system-supplied DSO at ...
Anybody knows what it is?upgrade 3.8.2 solved the problem
-
Warning : No Rate found in the opening period
Hello,
i want to make the currency translation and it works, but everytime there is one message that irritates me.
SPRunConversion Version 7.0.114
Warning : No Rate found in the opening period
20081200 - 18 Rows Calulated
20081200 - 0 Rows Updated
What is the opening period and where can i set the parameter for each entity?
Thx
Dirk
Edited by: Dirk Unkelbach on Oct 2, 2009 11:59 AM
Edited by: Dirk Unkelbach on Oct 2, 2009 12:00 PM
Edited by: Dirk Unkelbach on Oct 2, 2009 12:01 PMHi Dirk,
Opening period is normaly used for carry forward rules, but you get this warning in currency conversion also.
You can set the parameters for Opening Period in the CATEGORY Dimension.
First Parameter is OPENING_PERIOD : if its blank it uses the last month of a year (=> DEC if you use calendar year)
Second Parameter is OPENING_YEAR: blank means previous year (same as inserting -1)
This means, if you calculate budget for the whole year or a month in 2009, Opening Period is 2008.DEC.
If you dont have any rates in Time = 2008.DEC;Category=Budget (for each of your specific rates) you will get this warning.
Gruß
Jörg
Edited by: Jörg Finster on Oct 6, 2009 12:34 PM -
Warning host not found in topology
Hi I am new to Lync. After following tutorial to install Lync Server 2013 (front end) on Server 2012 R2, everything worked like charm. Then I decided to enable external access (another Windows 2012 R2) , so I started with Edge installation. Unfortunately
when I run Setup Lync Components, I get "Warning host not found in topology. All roles will be uninstalled."
I can find that this error is connected with DNS suffix.
I looked which name was not found in the error and it is Hostname: imc-leg.domain.local
The only difference is that name is written in small letter, when I open to see Computername or run hostaname in cmd I get IMC-LEG. I also added suffix domain.local in the advance options before I started with the configuration. I am also not sure if "-"
sign is allowed. If not can I just delete edge server from topology, rename the server and recreate the topology or not ?
My edge server has 2 NICs, 1st is LAN NIC 192.168.10.28 and second is in DMZ 192.168.3.28. We have static IP address.
LAN NIC has IP, Subnet Mask, DNS (AD)
DMZ NIC has IP, SNM, DGateway.
Both have File and print sharing for microsoft networks disabled ( I read somewhere that it can be disabled _ I would appreciate some opinions)
From Lync server I can ping FQDN of edge server, also DNS record in AD is created.
When I open topology on Lync Server (IMC-LSRV.domain.com), I can see Edge Pools : IMC-LEG.domain.local with internal LAN address (192.168.10.28) next hop is IMC-LSRV.domain.com. External Settings are: Access Edge service is sip.domain.com with DMZ address
192.168.3.28 also web conferencing and A-v edge service. Oud static IP appears in NAT-Enables public IP address.
Please help, I really don't know what to doOne more thing just like an info for the people that are trying to install Lync for the first time (like me), once configuration is exported from the FE Server name of the edge server must be in the xml file inside zip folder. Mine wasn't there so this was
first sign that something was wrong (I think with publishing topology). Now I see that my edge server is listed
-<Cluster Fqdn="IMC-LEG.domain.local" RequiresSetup="true" RequiresReplication="true">
<ClusterId SiteId="1" Number="3"/>
-<Machine Fqdn="IMC-LEG.domain.local" OrdinalInCluster="1">
<NetInterface IPAddress="192.168.107.28" InterfaceNumber="1" InterfaceSide="Internal"/>
<NetInterface IPAddress="192.168.33.28" InterfaceNumber="1" InterfaceSide="External" ConfiguredIPAddress="StaticIP xxxxxx."/>
</Machine>
</Cluster>
</Clusters>
And I have now one more question. When replication is supposed to happen. I didn't install certificates yet (3rd step) and when I run :
PS C:\windows\system32> Get-CsManagementStoreReplicationStatus | ft
UpToDate ReplicaFqdn LastStatusReport LastUpdateCreation ProductVersion
True IMC-Lync.dom... 23.04.2014 1... 23.04.2014 1... 5.0.8308.0
False IMC-LEG.dom....
24.04.2014 0... -
WARNING: No FormBeanConfig found under 'CustomerOpen'?
Hi all!
I am using Struts 1.2.8 with the following excerpt in my struts-config.xml:
<action path="/CustomerOpen"
type="com.brunata.servicerapport.CustomerOpenAction"
name="CustomerOpen"
scope="request"
input="CustomerInfo.page"
validate="true">
<forward name="success" path="CustomerInfo.page"/>
<forward name="application-error" path="ApplicationError.page"/>
</action>
My CustomerOpenAction looks something like this:
public class CustomerOpenAction extends Action
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
return mapping.findForward("success");
Every time I execute this action, I get this warning in my log-file:
[timestamp here] org.apache.struts.util.RequestUtils createActionForm
WARNING: No FormBeanConfig found under 'CustomerOpen'I've been googling the web for a while now, and it seems like lots of people have encountered this warning, but I cannot find any solution to it.....
What does this mean, and how do I avoid it?
~MortenPls check whether u have properly given the form_bean configuration in the struts_config.xml. It may look like:
<form-beans>
<form-bean name="CustomerOpen" type="com.brunata.servicerapport.CustomerOpen" />
</form-beans> -
Hi
It feels like a have tested the most that I can Google, but im new on Lync..
I have a lync multitennant 2013 server.
But when I run enable-cscomputer I get the following
WARNING: No patterns found. Skipping rewrite rules creation for Meet simple URLs.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: "Enable-CsComputer" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at "C:\Users\xxx\AppData\Local\Temp\Enable-CsComputer-26374787-f6b5-4a07-b8f4-7bd819d3ffc3.html".
Im not sure what to test? And what to do to verify that the settings is correct. Im new on Lync.. So all tips are greatly appreciated.To set the DNS name for the simple URL for multitenant Lync Server, run the following cmdlets:
$BaseURL = "https://meet.litwareinc.com/"
set-CsProvisionServiceConfiguration -SimpleUrlDnsName $BaseURL
To verify that the DNS name was set, run the following cmdlet:
(Get-CsProvisionServiceConfiguration).SimpleUrlDNSName
The following is a similar thread you can refer to:
http://social.technet.microsoft.com/Forums/lync/en-US/dfa064d8-5c53-4a69-aecd-ffe487a353d1/lync-meet-now-not-working
Lisa Zheng
TechNet Community Support -
Traceroute: Warning: Multiple interfaces found
I have added a route by
route add 10.224.36.0 -netmask 255.255.255.224 10.224.18.1
I can even ping to that IP. However when i do a traceroute it gives-->
$ traceroute 10.224.36.1
traceroute: Warning: Multiple interfaces found; using 10.224.8.152 @ ce0
traceroute to 10.224.36.1 (10.224.36.1), 30 hops max, 40 byte packets
1 10.224.18.1 (10.224.18.1) 0.608 ms 0.542 ms 0.410 ms
2 10.224.36.1 (10.224.36.1) 40.482 ms 45.331 ms 40.516 ms
What's wrong?
AnmolI don't think the version of traceroute here uses the routing tables at all, but just picks an interface to transmit on. That's why it whines about finding multiple interfaces. I'm not sure if other versions address this.
Try providing the interface directly.
Darren -
EJB3.0 App deployed with warning:Object not found in lookup of JPA_DEFAULT
Hi All ,
I am working on NWCE7.1. I am deploying Enterprise Application DC wich is having
1 . 3 EJB3.0 session DCs
2. 1 JPA DC
I am getting following warning in deployment. I have checked persistence.xml for jta-data-source , it is added. Still not working. I am getting this error after importing configuration(Track) for these DCs in my NWDS. Earlier build n deployment was working in other NWDS on other PC.
--- Deploying file(s):
D:\NWDS7.1\workspace.jdi\4\DCs\asianpaints.com\erecapp\_comp\gen\default\deploy\asianpaints.com~erecapp.ear
--- Status:
Deploy finished with warnings.
--- Description:
S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed: 0
Deployed with warnings: 1
Failed deployments: 0
~~~~~~~~~~~~~~~~~~~
1. File:D:\NWDS7.1\workspace.jdi\4\DCs\asianpaints.com\erecapp\_comp\gen\default\deploy\asianpaints.com~erecapp.ear
Name:erecapp
Vendor:asianpaints.com
Location:J2N_ERECTT_D
Version:20090217100038
Deploy status:Warning
Version:HIGHER
Description:
1. Exception has been returned while the 'asianpaints.com/erecapp' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 6358450:com.sap.engine.services.orpersistence.container.deploy.ActionException: [ERROR CODE DPL.DS.5030] Clusterwide exception: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of JPA_DEFAULT.
at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:584)
at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:343)
at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:637)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initDataSources(ComplexModuleCreator.java:344)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initRuntimeModels(ComplexModuleCreator.java:230)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.createModule(ComplexModuleCreator.java:154)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.execute(ComplexModuleCreator.java:84)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexActionAdapter.execute(ComplexActionAdapter.java:34)
at com.sap.engine.services.orpersistence.container.deploy.impl.ApplicationCreator.execute(ApplicationCreator.java:74)
at com.sap.engine.services.orpersistence.container.deploy.impl.PersistenceContainer.prepareStart(PersistenceContainer.java:187)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:877)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initDataSources(ComplexModuleCreator.java:360)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initRuntimeModels(ComplexModuleCreator.java:230)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.createModule(ComplexModuleCreator.java:154)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.execute(ComplexModuleCreator.java:84)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexActionAdapter.execute(ComplexActionAdapter.java:34)
at com.sap.engine.services.orpersistence.container.deploy.impl.ApplicationCreator.execute(ApplicationCreator.java:74)
at com.sap.engine.services.orpersistence.container.deploy.impl.PersistenceContainer.prepareStart(PersistenceContainer.java:187)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:877)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Result
Status:WarningYou have to give an explicit data source in your persistence.xml to solve this error normaly.
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="YOUR_UNIT">
<jta-data-source>DSNAME</jta-data-source>
Frank -
After System Copy warning file not found
Hi experts,
I got warning in my db2diag.log after performing system copy. My current SID is Q01 and previous one is P01.
2010-08-05-15.01.07.680835+420 E719728A497 LEVEL: Warning (OS)
PID : 1703936 TID : 1 PROC : R3trans
INSTANCE: db2q01 NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqualifydir, probe:30
MESSAGE : ZRC=0x860F000A=-2045837302=SQLO_FNEX "File not found."
DIA8411C A file "" could not be found.
CALLED : OS, -, unspecified_system_function
OSERR : ENOENT (2) "No such file or directory"
DATA #1 : File name, 15 bytes
/db2/P01/db2p01
Somehow after performing tp, R3trans. Db2diag.log show warning in accessing old path SID /db2/P01/db2p01.
I know it just warning but I wondering if this warning could lead to another error.
Any input will be appreciated.
Many thanks,
Aswin
Edited by: aswin cahyadi on Aug 5, 2010 10:14 AMHello Aswin,
As it seems to be the R3trans process that is linked to the warning message, please check the path definitions in your transport profiles. Check the directory, transport tool etc in STMS. Checck for any mention of the old sid.
Regards,
Paul -
WARNING: Unsed Block Found in Song
I'm now desperate -- the bugginess related to the UNDO command is reaching crisis stage. In an effort to solve the problem, I first cleaned house: consolidated MIDI tracks, deleted empty tracks, emptied the trash, and dbl-clicked on the memory indicator to invoke the Reorganize Memory function. When I did this last step I got the following error message:
=======================
Warning!
Unused Block found in song.
Please save song first.
(Code: $00000001)
=======================
Seeking advice:
a) what's this mean?
b) why has this occured?
c) how can it be prevented in the future?
More importantly...
d) under what conditions will Logic's brain get so addled such that hitting UNDO one time will result in multiple previous edits becoming undone?Hey iSchwartz,
Just adding to the concensus here:
A) It's a big red flag that your song is on the dark road of corruption. Time to get the tracks transferred to a new session.
B) In my experience it is usually from low event memory and legacy objects in your .lso
C) Rebuilding your Autoload/Templates and keeping your enviro/objects up to date while keeping the song file as small as possible. If I am opening a song from an earlier version of Logic I have an update procedure if I plan on working in it much. Rebuilding it earlier saves time in the long run.
D) It's just general event memory and corruption. Performance differences between the old and new can also be drastic.
.lso files passing through several revs of Logic also makes it easy to set in. Some thing I started doing recently: Some of my big songs I just have a master session and then several categorized subsessions-so I don't have to do crazy editing (keeping the event memory Low and the environment easily portable) to the master session and give Logic more chance for corruption to set in. This isn't necessary for the smaller sessions but some tracks you know are just going to get enough work hours that I take this precaution.
Cheers, J -
The add-on was downloaded directly into my Firefox add-ons without my knowledge or permission. It came in about the same time I was downloading music from YouTube. Luckily I found it when doing a routine check of my add-ons. I got rid of it pretty quickly and did a security check of the computer. There were no details with the add-on. Never had this happen before.
Many thanks to jscher2000 and gnittala for your help regarding the unwanted add-on called "greatsaver2". I have been having some problems with an MP3 converter which did download software I did not want. I quickly got rid of it but I think that is when the add-on got through. The problem site is (MC) YouTube Converter Version.rev8.1. Not good at all. Took a little time cleaning up the computer after trying to download a video from YouTube. I wanted audio only. This site has changed since the first time I used it. I have removed it. I was not aware that an add-on could get in this way. Very tricky. Sorry my reply is a bit late but it is just morning here in Sydney Australia. Again many thanks. What would I do without you guys!
-
HT4972 No software update section found on iPad/settings/general-
I'm trying to update my iPad software, but when I go to Settings/General- there is no software update section like on other iPads. My software desperately needs to be updated, but I don't know how to do this manually. Any help would be great. Right now my iPad shows I'm in version 4.3.5. Thanks.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Backing up in the notes section found in programs
How does one back up items which have been entered in the notes program found under the general heading programs found in the start menu?
Post relates to: Treo 750 (Cingular)deathaxe wrote:
I would still say for a few gigabytes use a DVD-R or a memory stick as the legal implications of the cloud still haven't been thrashed out.
Look at all the legitimate users of megaupload who still cannot get at their data and the FBI still hasn't worked out if or how they will let those users get to that data.
For me I have 2 x 2TB drives in caddies as backup and they live in a fire safe only coming out when they are needed.
I should have said, yes I do that as well but if my PC, backup HDDs and my house or even me were to disappear suddenly, people (some overseas) would almost certainly still have access to the data, at least until they could download it. MS won't know what's in the encrypted multipart zip files anyway (non-commercial websites).
Posting hard drives or even SD cards overseas every week (or day!) isn't exactly like a walk in the park or free - using the Cloud is - finally (using multiple accounts as needed). And I'm a lazy so and so so click-click-done suits me down to the ground. And gives me one extra layer of data redundancy (if that's the right word).
Having another backup option is always nice, though it's disappointing that you have to set up multiple concurrent uploads to use all the Infinity speed. -
I work with a macmini server:
Macmini 6,2
Intel Core i7
2,3 GHz
Os X 10.9.2First, clear your computer of the Adobe software previously installed with Adobe Cleaner Tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download a clean copy of the software here:
Other downloads -
Hi
I'm trying to delete apps in iTunes Library and from the iPhone.
1. Goto Library > Apps then I deleted the apps I dont use.
2. Goto the iPhone, select Apps then deleted apps from there that I'm no longer using.
3. Click Sync. Then I get the following warning:
iTunes has found purchased items on the iPhone “4S 16GB iPhone” that are not present in your iTunes library. Do you want to transfer these items from this iPhone back to your iTunes library? If you do not transfer these purchased items to your iTunes library, they will be removed from the iPhone.
4. I clicked 'Dont Transfer'. This is fine as I dont want the apps on the iPhone anymore.
5. I ejected the iPhone.
6. Later, I reconnect the iPhone again to iTunes. The warning appears again:
iTunes has found purchased items on the iPhone “4S 16GB iPhone” that are not present in your iTunes library. Do you want to transfer these items from this iPhone back to your iTunes library? If you do not transfer these purchased items to your iTunes library, they will be removed from the iPhone.
7. Clicked 'Dont Transfer'.
8. Then I tried 'Transfer'. This transfered "something" .. I dont know what transferred as I had deleted a few apps.
Why does this warning keep appearing everytime I reconnect? I'm not sure what it means or what it's meant to do.
Please can you advise me? I dont know what I'm doing wrong.Don't transfer, right click the device in iTunes and select Back Up.
Though, the iTunes interface is designed to be computer - phone and not the other way around, you may need to use something else to preserve your data.
Maybe you are looking for
-
How to clear the Page '09 recents list?
On Pages '09 and Mtn Lion. A right click on the Page icon shows a list of "recent" files, none of which exist any longer. Files that are open/closed do not get added to this list, but are added to the File>Open Recent list. Clear List clears this lis
-
How to change the Orginial Definition of an Item in OAF
Dear All, I have an item which the Read Only Property is calling a function through SPEL, and in any personalization level i can only choose between Inherit or True, first there is no False option (which i want to choose), Second i want to know how i
-
I just received my new iphone 4S today. I then did the update as said by itunes to IOS6... I now cannot be able to connect to my carrier at all. I'm wondering how I am meant to connect to the carrier or to take the IOS6 off! I am in need. Please help
-
I realise that this has been posted before, but I can't seem to get past this issue. I have tried for several days now to publish with no joy whatsoever. I keep getting the same error. I have tried everything I can think of to get around this. Can an
-
Firefox3 won't start at all.
I installed Firefox 3, but it doesn't start at all. Got this message: Add-ons: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}:0.7.5.4,{972ce4c6-7e08-4474-a285-3208198 ce6fd}:3.0 BuildID: 2008061004 CrashTime: 1214621281 InstallTime: 1214373748 ProductName: F