Wat should be data type for  negative and decimal values (eg: -1.2222)

What should be data type for  negative and decimal values (eg: -1.2222)

Hi
U can use the data type DEC while creating the DOMAIN and in the domain u  have sign check box at the left corner of the screen, click that check box , u can assign negative values for the field which refers this domain.
REWARD IF HELPFULL
Anees.

Similar Messages

  • Data Types for RadioButtons and PushButtons

    Is there a data type for representing radioButtons and pushButtons in the Oracle tables? If not, what is the alternative to using these controls?
    null

    Hello,
    The data type of your field is smallmoney or you want to convert a int or varchar value to smallmoney?
    Hugs!
    Bruno Destro
    Dicas de programação em .net, C# e SQL - http://smcode.com.br/blog.aspx

  • Data Types for Currency and Percent?

    I am struggling to find data types in the Power BI Designer for Currency ($) and Percent (%). I see these in many preview screenshots from Microsoft, but I cannot figure out how to implement these critical symbols for visualizations. Also, did someone
    forget to include data labels in the charts? I am finding this tool set to be very limited compared to the previous iteration of PowerQuery and Power BI for Office 365.

    Hello,
    The data type of your field is smallmoney or you want to convert a int or varchar value to smallmoney?
    Hugs!
    Bruno Destro
    Dicas de programação em .net, C# e SQL - http://smcode.com.br/blog.aspx

  • What is the data type for time and what to insert

    Hi there
    i had two attributes in a table called start_time and end_time and i want to insert time into these attrbutes e.g 10:00 and 11:00
    How do i do that
    what is oracle's built-in type for time???
    adn how do i insert values in the table(i.e the format)
    thanks

    There is not Oracle type that has just a time. The DATE and TIMESTAMP data types include both the date and the time (TIMESTAMP has millisecond resolution and has optional timezone support). If what you're really interested is a time interval (i.e. 1 hour), there are some INTERVAL data types.
    You have a lot of options for how to specify dates and timestamps along with format masks.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

    Hi
    how to create a external content type for  Read and Update data from two tables in  sqlserver using sharepoint designer 2010
    i created a bcs service using centraladministration site
    i have two tables in sqlserver
    1)Employee
    -empno
    -firstname
    -lastname
    2)EmpDepartment
    -empno
    -deptno
    -location
    i want to just create a list to display employee details from two tables
    empid firstname deptno location
    and same time update  in two tables
    adil

    When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list.  When I attempt to edit it, I get an error:
    External List fails when attached to a SQL view        
    Sorry, something went wrong
    Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
    I can edit the view in SQL Manager, so it seems strange that it fails.
    Any advice would be greatly GREATLY appreciated. 
    Thanks,
    Randy

  • Data Type for Process Flow... PB with Date?

    I've got a problem by passing parameters in process flow.
    I have a mapping with a parameter DATE_EXEC (data type : DATE) and a default value that is TO_DATE('20/01/2007' , 'dd/mm/yyyy') . My mapping is working good when i launch it.
    I have a process flow which contains the mapping. This process has a parameter DATE_EXEC (data type : DATE). I bind the 2 DATE_EXEC. But when i launch my mapping the value is not recognized, I try with :
    - TO_DATE('20/01/2007' , 'dd/mm/yyyy')
    - 20/01/2007
    - 2007.01.20
    - 2007-01-20
    My question is what are the data type in process flow? They are not ORACLE TYPE.
    For example , a parameter in a mapping which is a VARCHAR2 must be input between quotes but if you bind it to a parameter of a process flow which is a STRING (not ORACLE Data type) , you must input it without quotes?
    Anybody has some rules about that?
    I apologize for my english, i'm a french people.

    Here is some information on the literal quote or not quote query and what I think you need to do at the end, hope it helps. Not exactly intuitive...since the flow designer (you) have to know what is a PLSQL object and what is not.
    1. Literal = FALSE
    When Literal = FALSE is set then the value entered must be a valid PL/SQL expression which is evaluated at the Control Center e.g.
    'Hello World!'
    22 / 7
    2. Literal = TRUE
    When Literal = TRUE then the value is dependent on the the type of Activity. If the activity is a PL/SQL object i.e. Mapping or Transformation, then the value is PL/SQL snippet. The critical difference here is that the value is macro substituted into the call for the object. The format of the value is identical to that entered as default value in the Mapping editor. e.g.
    'Hello World!'
    sysdate()
    If the activity type is not a PL/SQL object then the value is language independent. e.g.
    Hello World
    3.1427571
    What you should try......
    Check the map activity parameter in your process flow to see if literal is false (an expression), set it to false and then try using your TO_DATE('20/01/2007' , 'dd/mm/yyyy') expression, deploy your flow and execute. Alternatively the user guide defines the DATE type for flow with the format YYYY-MM-DD so you can have the parameter value as '2007-01-20' use literal equal to true and remember and quote your value.
    Cheers
    David

  • Labview How to specify 1d array of clusters as data types for variant to data

    Hi, I'm new to labview. Can anyone tell me how to specify 1d array of clusters as data types for variant to data?

    First of all, you should be sure that there is such a data type within the variant; otherwise, you will run into errors.
    I recommend you to create the cluster and create a type definition from it. Then drop an array shell from the array palette and drop the cluster type into that array.
    Connect that constant to the data type input of the Variant To Data function.
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How can take a Custom Data Type in TestStand and create a LabVIEW DataType?

    I am using LV 8.2 and TS 3.5.
    I have an existing Custom Data Type in TestStand and I want to make a LabView Type Def.  The TS DataType contains 11 elements: a Visa Resource Container of 2 elements (String, DeviceName and Number, Session), 9 Numerics and 1 String Array.  For Backwards compatability, I cannot modify the TestStand DataType.
    Thanks,
    Jean

    Hi Goldee,
    You should be able to do that. It's a two step procedure.
    1) Creates in LV a custom datatype that maps 1:1 yours TS datatype.
    2) Go in the TypePalette in the properties of yours TS Datatype and check into LV Cluster Passing Menu'. Here you can Connect a specific Field of the TS datatype to a Specific Label of the corresponding LV datatype. Once you've done it the TS datatype will result modified, I mean "starred" but the change you applied should not impact the datatype structure itself only the way you pass it to LV.
    Have a good day
    FiloP
    It doesn't matter how beautiful your theory is, it doesn't matter how smart you are. If it doesn't agree with experiment, it's wrong.
    Richard P. Feynman

  • Data Type for a Longitude/Latitude Column in an Oracle dB Table?

    Greetings All,
    What is the recommended data type for a Longitude(Lon) or Latitude(Lat) Column of an Oracle dB Table? I am creating a signs inventory table in our Oracle database to be used as a data warehouse for our signs inventory. The Lon and Lat fields along with some other data will be populated from a MS access file exported from our Geodatabase. Currently the data type for the Lon and Lat fields of the MS access file is defined as "Double". A couple of Examples of the Lon and Lat data are as follows:
    Lat                       Lon
    59.4564555909     -135.3133542922
    64.841125            -148.01808
    ...What data type should these two columns be defined in the new Oracle database table??? Should the data type be defined as FLOAT(126), NUMBER(10, 6), or else? Any suggestions/help on this would be greatly appreciated.
    If the data type is defined as NUMBER(10,6), the first example of Lon "-135.3133542922" will be truncated to "-135.313354" or would I receive an error while trying to import the data from an access file to the Oracle dB?
    Thanks in advance for any/all the help.

    Orchid,
    Is SDO_GEOMETRY available in Oracle 10g?Yup. I'm still on 10g as well; there's no shame in that.
    How do I format my lat/long's into WKT and use the SDO_GEOMETRY constructor?The March 16th example shows the steps, but I take it you're trying to get your data from MS Access into Oracle. Is that right? If so, consider these options:
    OPTION 1, When you have < 50k records
    Simply write a query that returns INSERT statements that you can run against Oracle.
    For example, let's say you have a table in MS Access defined as msaCoords (ID, LongX, LatY).
    Let's say, your destination table in Oracle is named oraCoords(ID NUMBER, Geometry MDSYS.SDO_GEOMETRY). Then,
    SELECT "INSERT INTO oraCoords (ID, Geometry) VALUES (" & ID & ", SDO_GEOMETRY('POINT (" & LongX & "," & LatY & "'), 8307);" FROM msaCoords;
    -- "MS-ACCESS QUERY RESULTS"
    INSERT INTO oraCoord (ID, Geometry) VALUES (1, SDO_GEOMETRY('POINT (-135.3133542922,59.4564555909'), 8307);
    INSERT INTO oraCoord (ID, Geometry) VALUES (2, SDO_GEOMETRY('POINT (-148.01808,64.841125'), 8307);Save those MS-ACCESS QUERY RESULTS to a text-file (D:\MyPts.sql). Launch SqlPlus and type @D:\MyPts.sql
    Once it's done, type Commit into SqlPlus and you're done.
    OPTION 2, when you have > 50k records
    Use SqlLoader. There's an example posted { here | http://forums.oracle.com/forums/thread.jspa?messageID=9412123&#9412123 }
    Cheers,
    Noel

  • Data Type for HTTP

    Hey guys
    i have a HTTP to File scenario where in my getting and XML file which has sone tags of this form
    <ServiceDateTime dateTypeIndicator="PromisedForDelivery">2007-04-06</ServiceDateTime>
    how should i create data type for this?
    is this an attribute?
    thanx
    ahmad

    Hi,
    Just "Insert Attribute" by right-clicking on ServiceDateTime.
    Regards,
    Bill

  • Counter KF with 1 & 0 and difference between data type NUMBER (DEC) and INTEGER (INT4)

    Hi,
    I need to create a counter kf which should populate 1 and 0 to this counter field. Please let me know is there any difference between data type
    NUMBER (DEC) and INTEGER (INT4).
    Please suggest.
    Thanks & Regards,
    Pavan kumar

    Hi Pavan,
    The basic difference between Number(DEC) and INT4 is its internal storage in system.
    For Number (DEC) - Value internally stored as packed number with 3 decimal places whereas INT 4 as 4 byte integer without decimal places.
    For counter KF, you can go for INT 4.
    Hope this helps.
    Thanks

  • Naive Bayes Training - CLOB as output data type for JSON string?

    Hello everyone,
    My training model outputs a large JSON string that doesn't fit into one row, so the string is split across multiple rows. Default - or only possible output data type for that matter - is varchar according to the official documentation on PAL. Is there any chance I could use CLOB for the output?
    Regards
    Henry

    The property you provided is for applying an NB model, not for building one.
    For build, you should have used Sample_NaiveBayesBuild property file.
    I ran the NB apply sample program with your property, and was able to get past the point where you have problem.
    Please double check if you really used the property you provided and if it matches to the program you wanted to use.

  • Movement Types for Receipt and Consumption

    Dear all,
    I am an ABAPER.
    My requirement is to develop a Material balancing report.
    In which i have to display
          Opening Stock
          Value
          Receipt
          Value
          Consumption
          Value
          Closing stock
          Closing value
    for a material.
    Here I need to know the table and fields for the above mentioned output fields.
    Particularly i need to know what are the
    movement types for Receipt and
    movement types for Consumption
    Can anyone let me know?
    Regards,
    Prem

    hi,
    few reports are:
    MC45 INVCO: Analysis of Usage Values
    MC46 INVCO: Analysis of Slow-Moving Items
    MC47 INVCO: Analysis of Reqmt Values
    MC48 INVCO: Anal. of Current Stock Values
    MC49 INVCO: Mean Stock Values
    MC50 INVCO: Analysis of Dead Stock
    MB51......
    TAbles:
    MVER - Material consumption.....
    MARC Plant Data for Material
    MARD Storage Location Data for Material
    MSLB Special Stocks with Vendor
    MSPR Project Stock
    MKOL Special Stocks from Vendor
    MSKU Special Stocks with Customer
    you can see al the mvt types in T156 table...
    Hope it helps...
    Regards
    Priyanka.P

  • Condition type for landing and clearing charges for imports

    All SAP Gurus,
    Which standard condition type to be for Condition type for landing and clearing charges for imports?
    Regards,

    If both Condition types are Quantity basis then you can Create New Condition types by Referring FRA1 & FRC1 Condition types.
    Else Create New Condition types called ZCCH for Clearing Charges by giving the Following inputs:
    Condition class A
    Calculation Type A
    Condition Category B
    Plus/Minus A
    Also in Control data Check Accruals option and in Scales tab give Scale Value as 2 if want.
    Create New Condition types called ZLNC for Landing Charges by giving the Following inputs:
    Condition class A
    Calculation Type A
    Plus/Minus A
    Uncheck Accruals options and save.
    Regards,
    Ashok

  • Default date type for IT0041 in action

    Hi,
    I configure feature DATAR to set 01 as default date type for IT0041, but when I do hiring action, default date type will be 01,02,12.
    Don't know where to change the default.

    Hi,
    Please verify if there is any dynamic action in table V_T588Z set-up for same which may cause override over default.
    Also, verify if your DATAR feature is set up correctly for relevant country grouping and activated.
    Thanks,
    Ameet

Maybe you are looking for