HT4628 My ipad and iphone connect and recognize wifi signal, but my mac pro running 10.6.8 does not recognize or list the wiifi signal as option, any ideas?
Hi,
In Austria, iphone and ipad "see" and connect to wifi signal no problem but mac pro in same room will not even allow me to choose the same wifi signal. It seems almost blocked. Havectried everything it seems by restarting, deleting preferred accoints, etc. software is updated but running osx 10.6.8
Thanks for any help!
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.
Similar Messages
-
My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums. -
Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?
Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?
-
On the wifi settings it shows that my ipod is connected to a network, but when I try to open safari it does not open it, because it says its not connected to wifi
You may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?
Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
(90452) -
I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?
Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me
Ask the carrier in the US who the phone is locked to if they will unlock it for you - put an unlock request into that carrier.
Other than that and if they refuse to unlock it, then there is nothing you can do except buy a new phone. -
I have an iphone 4 which quit working and I had my iphone 3 reactivated until I get my 4 replaced or fixed. My computer does not recognize my iphone 3 when I plug it in. I also cannot figure out how to apply my last backup to my iphone 3
If your iPhone 4 was running iOS 5, you can't install iOS 5 on an iPhone 3G which means you can't restore the 3G from the backup of the iPhone 4 running iOS 5.
http://support.apple.com/kb/TS1538 -
My sister gave me her 1st gen iPad to see if I could solve an issue. It won't turn on, and when it's plugged into a power cord there is a slow pulsing sort of flash that happens on the screen....any ideas?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe! Now see if it charges normally and after a period try to turn it on again. If the batter has been drained it could take 20 minutes or so for it to show that it is charging.
Also considering if the battery need replacing! -
I have lightroom 5.7 installed, and have just downloaded / installed Lightroom CC, but although lightroom 5 runs ok, Lightroom CC will not run, any ideas please.
What seems to be working for many users (myself included) is to sign out of CC and then sign back in. After signing back in, LR will run.
John -
iTunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.
I think this article will help you.
-
I have a Macpro Book and I just downloaded new software to my ipod touch(3rd gen). Now it does not show up in itunes nor does it turn on. I believe it just downloaded the software and never updated it. What do I do?
You appear to have a second generation iPod touch, not a third, and those can't be updated past 4.2.1. Apple sold 8GB second generation models at the same time as the third generation ones.
(70782) -
I updated diamond dash on my I pad and now it will not let me play it any ideas ?
You need to put your passcode in. This is a security feature.
Forgot or Wrong Passcode
http://support.apple.com/kb/HT1212
Forgot Passcode use recovery mode to restore
http://support.apple.com/kb/HT1808 -
IPhone connects to secured WiFi network, but can't access Internet
Problem: iPhone connects to my secured home WiFi network, shows WiFi strength bars at top of screen, displays checkmark, lock, power, and blue arrow on WiFi Networks screen; however, cannot access Internet, iTunes store, stocks, Weather or anything else.
Tests I've run:
1. iPhone itself:
---DCHP:
IP Address = 192.168.2.102 (within range automatically allocated by LinkSys router--see below)
Subnet Mask = 255.255.255.0 (as per LinkSys router)
Router = 192.168.2.1 (as per LinkSys router)
DNS = 192.168.2.1 (confirmed by Apple as a valid DNS address given the above information)
Tests:
*Forget Network and rejoin--Failed to connect to Internet
*Forget Network, reboot iPhone, and rejoin--Failed to connect to Internet
*Reset Netowrk Settings and rejoin--Failed to connect to Internet
*Reset All Settings and rejoin--Failed to connect to Internet
*Deleted DNS entry--Failed to connect to Internet
*Connect to Apple Store unsecured network--Success
*Complete reset of iPhone at Apple Store:
**Brought home, made no calls, did not sync with iTunes, did not reenter any info deleted by complete reset, joined network--Failed to connect to Internet
**Synced data previously saved to iTunes, rejoined network--Failed to connect to Internet
2. LinkSys router WRT310N:
Tests:
*Updated Router firmware--iPhone failed to connect to Internet
*Entered a Static IP address on both router and iPhone--iPhone failed to connect to Internet
*Reserved an IP within range automatically allocated by LinkSys router--iPhone failed to connect to Internet
*Reserved an IP outside range automatically allocated by LinkSys router--iPhone failed to connect to Internet
*Forced MAC filtering to use iPhone WiFi Address--iPhone failed to connect to Internet
*Disabled all MAC filtering--iPhone failed to connect to Internet
*Changed security settings:
**No Security--Success
**WAP Personal (AES)--iPhone failed to connect to Internet
**WAP Personal 2 (auto selection AES or TKIP)--iPhone failed to connect to Internet
**WAP Personal 2 (forced AES)--iPhone failed to connect to Internet
**WAP Personal 2 (forced TKIP)--iPhone failed to connect to Internet
*Changed security WAP Password/Passphrase:
**10 characters (alpha numeric)--iPhone failed to connect to Internet
**12 characters (alpha numeric)--iPhone failed to connect to Internet
**10 characters (alpha numeric/ Uppercase alpha)--iPhone failed to connect to Internet
**10 characters (alpha numeric/ Lowercase alpha)--iPhone failed to connect to Internet
**10 characters (all numeric)--iPhone failed to connect to Internet
*Set router to Mixed Wireless N/G/B Network Mode--iPhone failed to connect to Internet
*Changed network radio band from Auto to Wide to Standard--iPhone failed to connect to Internet each time
*Set router to Wireless G Only Network Mode--iPhone failed to connect to Internet
*Changed Router IP address from 198.168.2.1 to 198.168.1.1 (LinkSys default)--iPhone failed to connect to Internet
3. Microsoft router MN-500:
Tried this old router (the one I used before purchasing the LinkSys). It is an old (circa 2002) Wireless B base station with WEP Security. The iPhone was never able to connect to the Internet using various settings, many of which were duplicates of the LinkSys tests above.
On both routers my wife's Dell laptop and my HP printer connect without incident, using the same network/security settings.
I have always been able to connect to various unsecured WiFi networks; I have never been able to connect to a secure WiFi network (although the only one I've really tried has been my own).
I am at a loss as to what to do next. Any suggestions?SUCCESS!!!!!
I visited my brother-in-law yesterday and attempted to connect with his secure network. By sheer luck, he is using the exact same model LinkSys router. My iPhone connected first time--so the iPhone was eliminated as a source of the problem.
I didn't do a lot of troubleshooting at his house, but I did notice that his network was set for both dynamic DHCP and dynamic DNS. I know that either or both of Windstream (my ISP) and my broadband modem requires a pair of static DNS addresses.
Sure enough, delving real deep into Windstream's support site, I discovered a LinkSys router DNS help page, specifying how to set static DNS addresses in LinkSys routers. I then accessed my router, enterd the known static addresses, saved the router settings, then rebooted the iPhone and connected to the network.
SUCCESS!!!
Thanks to Jane, who suggested it was an ISP issue, Jason, and all at Apple support. dumonj, I'll email you directly. Try this suggestion and see if it helps. -
Iphone connects to secured wifi network but cant surf the internet
I am trying to connect to the wifi at the office, it's a 64 bit WEP secured network (I enter a 10 character hex key). The Iphone connects to the network and is assigned a valid IP address. But when I try www.google.com or 64.233.167.99 for example, it fails with 'Safari could not open the page because the server stopped responding'.
It all works fine at home on my non secured wifi network.
Please, can someone help? Thanks.Are you 100% sure the WiFi at your work has access to get out...and also, I assume they know you are getting on it. Not sure what type of office you are at (eg: large business with network support/admin or at a small office where you or somebody right there set it up).
But if large office with network admin...could be they locked it down with MacAddresses as well.
Maybe you are looking for
-
[Amixer] Invalid Argument - Sound but not levels
\o/ I recently bought a USB Headset. I'm using ALSA without Pulseaudio. The sound is working fine, but I have a problem setting levels etc. When I open amixer and the default card is set to the headset, the mixer fails to load with amixer: Mixer defa
-
Making changes in a User's account, my admin's account not recognized
Just upgraded A Quicksilver 2002 G4 to Leopard from Panther. Used Upgrade and everything worked amazingly well. I'm the admin, my wife & daughter are users. All three of us can log in using the names and passwords we have always used Only trouble is:
-
How to Get SQL Results in Java?
Hello, I'm new to java and have a few questions when running sql. I have no problems connecting to the Oracle 9i database, but my questions are these: (1) I have a CREATE TABLE statement. How do I check to see if the table was actually created? SQL r
-
"Look for Apple TVs" is checked, but Apple TVs a No-Show
My AppleTV refuses to re-unite itself with iTunes. In iTune Prefs the "Look for Apple TVs" is checked, but no Apple TVs show up in the box below. So I can't input the pass-code to get it syncing. It's weird because the network-password info in "Setup
-
Is there any way to test JMS adapter.. What do I have to install & configure.??