Waveburner 1.1.2 - Burned CD has pops / click in the track

This is a huge problem. I'm finding that when burning a CD using Waveburner, I get random pops that show up. There are so few, that they are hard to catch (a couple in a 20 minute CD). Is anyone else having this problem? Is there a solution?
Just to get this out of the way - they don't exsist in the actual audio track, it's not a clock or latency problem.
Any help would be appreciated.
Thanks.

Could be any number of things. I would suggest trying:
Decrease burn speed. I use 4x as a maximum for audio cds (if the burner will allow that speed).
Bounce project to disk and examine the file before burning. This will tell you if the clicks occur before the burn.
Run activity monitor and have a watch at the processor history window. You may be using "too many" plugs and putting too much strain on the computer.
Internal clipping of plugs - check to be sure you aren't overloading any of the plugs.
Are you doing anything else with the computer while burning?
Good luck....HL
G5 Dual 2.5 Mac OS X (10.3.8)

Similar Messages

Audigy 2 Value randomly pops/clicks when the computer is just idling.

EAudigy 2 Value randomly pops/clicks when the computer is just idling.; I can't figure out why the I hear random popping and clicking when I'm doing absolutely nothing to the computer. Typing this right now doesn't seem to cause any popping. It usually happens when I'm not really doing anything to my computer. This was happening with Creative's drivers and software so I switched to kX drivers, but that didn't help. When I first got my computer (Asus A7N8X-E Deluxe) and got the Audigy 2, I had no problem with Creative's software/drivers at the time, no popping had occur until I installed an SATA HD. PCI latency tool helped at the time. Then I had to go through a reformat and after the reinstallation of Windows XP, the popping started occuring randomly. After my motherboard supposely didn't want to POST anymore, I bought another one which was the Epox. And same problem occured even though I reformat and reinstalled windows.
Right now, the only thing I could think of that the SATA HD and Sound Blaster cards don't mix well together. But none of these are sharing resources. I did not want to try decrease any hardware acceleration at the moment, will there be any difference in sound or performance if I lower the acceleration?
Here are my current specs,
Windows XP Pro SP3
Amd AthlonXP 2600+ @ 2.2ghz
GB DDR Ram
ATI x800 xt AIW
Epox 8RDA3+ Pro
Running Sata HD and IDE, SATA is the master dri've.
Some other info,
The sound card is not shared by any IRQ
PCI Latency Tool didn't help when I tried to set the latency from 32 to 64
Bios is updated
Nforce2 drivers are updated
Klite codec pack 4.5.3 installed
kX drivers used instead of Creatives?
Onboard sound is disabled
Dxdiag did not find any problems
Keyboard is connected to PS/2 to USB adapter
Mouse is connected to USB

EAudigy 2 Value randomly pops/clicks when the computer is just idling.; I can't figure out why the I hear random popping and clicking when I'm doing absolutely nothing to the computer. Typing this right now doesn't seem to cause any popping. It usually happens when I'm not really doing anything to my computer. This was happening with Creative's drivers and software so I switched to kX drivers, but that didn't help. When I first got my computer (Asus A7N8X-E Deluxe) and got the Audigy 2, I had no problem with Creative's software/drivers at the time, no popping had occur until I installed an SATA HD. PCI latency tool helped at the time. Then I had to go through a reformat and after the reinstallation of Windows XP, the popping started occuring randomly. After my motherboard supposely didn't want to POST anymore, I bought another one which was the Epox. And same problem occured even though I reformat and reinstalled windows.
Right now, the only thing I could think of that the SATA HD and Sound Blaster cards don't mix well together. But none of these are sharing resources. I did not want to try decrease any hardware acceleration at the moment, will there be any difference in sound or performance if I lower the acceleration?
Here are my current specs,
Windows XP Pro SP3
Amd AthlonXP 2600+ @ 2.2ghz
GB DDR Ram
ATI x800 xt AIW
Epox 8RDA3+ Pro
Running Sata HD and IDE, SATA is the master dri've.
Some other info,
The sound card is not shared by any IRQ
PCI Latency Tool didn't help when I tried to set the latency from 32 to 64
Bios is updated
Nforce2 drivers are updated
Klite codec pack 4.5.3 installed
kX drivers used instead of Creatives?
Onboard sound is disabled
Dxdiag did not find any problems
Keyboard is connected to PS/2 to USB adapter
Mouse is connected to USB

Help: Monitor has "popped" out of the neck slightly, now crooked

Hi all,
I recently shipped my iMac G4 17"inch with no problem in terms of functionality. The internal components are fine and new pixels were slain in transit. However, the neck must have had some serious stress on it, because the neck has detached slightly from the back of the flat panel display. It has "popped out" on one side, making it crooked, tilting to the right slightly. (In other words, the silver circle that connects the neck to the flat panel is raised on one side and is no longer flush to the monitor, making it uneven and tilting the monitor in front). I tried applying some pressure, laying it flat on the screen and forcing it back into place, but I had no luck at all. Any suggestions? Is there anyway to detach the two and put it back together?
Thanks in advance!

Hi,
Although there are manuals available explaining how to disconnect the neck from the dome (please email me with your processor speed if you want a link) I don't think it will get you very far. The neck does not extend in to the iMac's dome base hardly at all so you won't get any leverage. I'd simply suggest wedging one side of the dome up to make the display level and put it down to experience. ;-(
mrtotes

How can I get rid of a vertical ad section in Yahoo games that has popped up on the right and takes 30% of the game window away. I can't get rid of it.

A few days ago, Yahoo decided to put up a vertical section on the right side of the game window that takes up 30% of the screen in the game. I have not been able to get rid of it.
I asked the Yahoo Customer Care rep and she said that it is not supposed to happen as the game should not be stopped by the ads and that I should try with another Browser. I tried it with Chrome and that ad section was not there with Chrome.
I was told that it was probably a browser issue and I did disable most of the add-ons and plug-ins but it did not work.
Any suggestions as to how I can get rid of that vertical ad section?

This problem is not a pop-up. First of all the problem did not start until Yahoo changed their set up for ads in Yahoo Games.
Once it did start, the ads do not "pop-up", it is a vertical bar that is there all the time. You cannot get rid of it.
By the same token, it is not a Yahoo Problem since the problem does not exist using another server.
Yahoo says it has to do with some add-ons or plug-ins in Firefox that is causing the problem.
As you can see by the screen picture, one third of the game screen has a vertical ad area. I want to get rid of it.

My mac book has pop ups all the time

I have a mac book and it keeps getting pop ups I let my friend use the computer so I have no clue what she did but when i got it back pop ups started happening I have disabled the pop up on safari its self but it did nothing Im not sure what to do?

You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

The battery in the iPhone4 has swollen up and pushed open the iPhone. The back glass has popped off and the inner frame is bent out of shape to accommodate the swollen battery.

I first noticed it was not holding charge. Then it would only work when plugged in. I bought a new iphone5s. But i went to give this one to someone else to use and discovered it had done this:

My iPhone 5 did the same thing and the batter kept shutting off prematurely. I took it to Apple today at lunch and they said they have a program to replace the swollen batteries at no cost to the consumer. I should get it tomorrow, they had to order it. I would ask Apple again if you aren't getting the answers you are looking for.

How do I get Apple to stand behind their warranty and replace my defective computer? The hard drive has been replaced twice, the track pad once, and other hardware issues. Can anyone help me so I can get Apple to replace my defective

My computer has been a lemon. They refuse to properly diagnose, fix, and document my complaints regarding the multiple failures I have had with this computer. Also, I was told that upon my logic board being replaced back in April or May that the topic of replacing the computer altogether with one of equal equipment would be appropriate. Insofar, I have been to the store at least three times in the past month to discuss my issues with the computer that were not resolved when the hard drive was replaced in May. I was also told that the repairs on my system would be good for up to 90 days after the repair work was done and that I could buy AppleCare at the end of the 90 days in lieu of insuring a product that still had defects. I have been on the phone for what feels like hours with Apple trying to work this issue out but they are not wanting to stand behind their product nor are they willing to stand behind their warranty. The warranty expressly states that a computer can be replaced entirely if the defect is considered hardware malfunction and at the representative’s discretion. Every time I brought it in for repair it was due to hardware malfunction; however, they also said once that it was an accessory that I bought that was causing the problem which ended up not being the case after all. This is totally unacceptable. I also asked Mark from AppleCare to let me know what was repaired the second time the computer was put through a diagnostic at the Apple Store. Beachballs, Gears, excessive heat, not being taken seriously at the Apple Store, being insulted by a Mac Genius at the Apple Store, being misinformed by a Mac Genius, dealing with a misinformed Mac Genius. They replaced my iPod touch without much ado. I was also accused by an Apple Genius of being "hyperbolic." He said this in response to my complaint of the computer melting--literally--items on my computer desk. I am either wanting a refund of my money or a replacement of my laptop. Also, I have lost an incredible amount of data on my computer due to the hard drive being replaced x 2. Not acceptable. Also, the Apple store is 1 hour from where I live. I am currently looking for employment and additionally have a legal case pending where I am the plaintiff. I have lost VERY important documents in both matters which has caused an extreme amount of stress. I do not need the added stress of an unreliable and unsafe computer. I also have been waiting for a call back from Kelly (left two voice messages with Kelly) and Mark (wrote an e-mail for which he has not responded to insofar) at Apple but have heard nothing from either one of them regarding the status of my computer. The only thing I received which was automated by the Apple Store was a confirmation that my computer was ready. I have requested documentation of what was done (basically, I am asking for the receipt) before I drive an hour to pick it up. Haven't heard anything. I brought this computer in on July 24, 2011. We are now upon August 2nd. When do I get to know what was even done on my computer? Do they really think that I am going to take back a computer into my possession only to have to bring it back shortly thereafter to address one of the many issues causing it to malfunction in the first place? I have owned 5 computers since 1988. All of them PCs. This is my first Mac. Will it be my last?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Recorded video has saturation clicks in sound track

Using my iPhone 4S running latest iOS6. Using the inbuilt camera app in video mode. I recorded a performance art event and all the audio on the video track has clicking sounds throughout which are so loud they have ruined the recording. Looking at the audio waveforms they all appear to be saturated where the clicks happen. There is no way to adjust the gain control using the camera app. Is there any solution or am I going to be unable to record any video in situations where the ambient sound is loud?
My phone is in a LifeProof case, if this makes a difference to the audio saturation.
Should I purchase a separate mini jack microphone?
Any third party video recorder app with gain control you know of?
Thanks,
Steve

Well, for what it's worth, I've not had too much success with it myself (otherwise I'd have made some suggestion).
If I have some minor clicks I tend to surgically remove them in editor. It can take ages, so I'd love to know an easier way too!
Quad 2.5 G5. 8 gigs. 250 & 500 gig Internal Drives. G-Tech G-Raid 1 TB Mac OS X (10.4.6) FCP 5.0.4 (FC Studio). Photoshop CS2. Sony HVR-Z1E and HVR-M10E

My computer froze so i restarted it, and now that its back on every document i'v worked on has popped up on my desktop and will not exit. what should i do?

my computer froze so i restarted it, and now thats its back on every document i've work on has popped up on the desk top and wont exit. what sould i do?
it is a macbook pro, OS X mountain lion 10.8.2, i can open new windows and exit them but not all the pop ups

Start from your recovery system. OS X Lion or OS X Mountain Lion includes a built in set of utilities in the Recovery System. Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up. After the Recovery System is finished starting up, you should see a desktop with a OS X menu bar and a "Mac OS X Utilities" application window. Note: If you see a login window or your own desktop and icons, it is possible that you didn't hold Command-R early enough. Restart and try again.
When your computer finishes starting up, choose Disk Utility from the Utilities window.
Click the First Aid tab. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
DALE

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

ITunes + Certain Soundcards = Pops/Clicks!

I've been messing all day trying to figure out this problem and have made some progress. Please could you also test:
Download CR 01 from here http://www.billy-corgan.com/index.php?page=mp3s (this is a downloadable FREE album by the smashing pumpkins). The file is 32mb and contains 4 songs.
Play them in iTunes(windows) and listen out for out random pops/clicks. I hear them in the first 30 seconds of track 1. I am using an RME HDSP 9632 soundcard which is a rather expensive pro audio card.
The same file played through Windows Media Player has no signs of any pops/clicks using the same soundcard.
Now if I change the audio output from the RME card to the motherboards onboard audio, the same file in Itunes does not have any clicks at all.
At first I thought my soundcard might be to blame but this can't be the case because it works perfectly fine with other media players. It's just iTunes(7.1.3.1) that causes these problems.
Please test!

I'm sad to say I listened to the first 43 seconds of the first track. Now that I've finished vomiting, I can tell you that I didn't hear any click or pops (iTunes 7.2.0.35, Quicktime 7.1.6).
Try enabling safe mode in the Quicktime control panel, on the Audio tab. On my computer it sounds fine either way, but some people have better sound with safe mode enabled.
You may also want to upgrade your Quicktime (you can do that separately from iTunes, if you want).
http://home.comcast.net/~teridon73/itunesscripts/

My Grandson has had his ipod touch stolen. The tracker device shows it in a front garden of another road - but it isn't. How accurate is the tracker device please?

My Ipod touch has been stolen. The tracker shows it to be in a front garden of a road nearby. But it is not there. How accurate is the tracker deviceand should I report it to the police please?

The iPod touch does not have GPS, so the location accuracy is greatly reduced. It relies on the known location of nearby WiFi networks. As WiFi networks can extend for 100m or so, the iPod could be anywhere within a 100m radius of whichever WiFi router it is connected to.

Displaying a caption when multiple click boxes has been clicked in a slide.

I have 9 click boxes in my slide which when clicked opens a different page except 1 click box.1 click box takes the user to the previous page . I want to display a text caption when the user has clicked other 8 click boxes just to make sure they go through all the pages. Is there a way in captivate to do this? If yes, how do I do it?

Since you are not yet familiar with advanced actions (and variables?), will try to explain in detail and provide some links to articles/blog posts as well.
Create 8 user variables, one for each click box (Project, Variables); I will label them v_one, v_two.....v_eight It is not necessary to give a default value
Create another user variable v_counter that will be incremented whenever a click box has been clicked for the first time
Create a first click box (set to visible), label it CB_One (find that easier) and in the Properties panel, Action accordion, On Success change the action to 'Execute Advanced actions'. Then open the actions dialog box with the Folder icon that appears.
You have to create a conditional action, so select that type, and label it CB_One (is possible, an exception because normally you cannot have same labels); this action will need two decisions (have a look at my video tutorial: http://kb2.adobe.com/community/publishing/858/cpsid_85847.html):
First decision 'Visited' checks if the click box has already been clicked, visible when the value of v_one = 1; if this is not the case (first click) v_one gets the value=1 and the counter v_counter is incremented
Second decision 'Check' checks the value of the counter, and shows an initially invisible button (I choose a button, BtNext but you can also have a click box) if the counter reaches 8, bummer the forum doesn't allow me to insert an image, have to type:
IF section v_counter is equal to 8
Actions section Show BtNext
Duplicate the click box 7 times, label them CB_Two, ..... CB_Eight (beware: case sensitivity). To each copy the same advanced action is attached, but you'll have to create duplicate actions for each one CB_Two.... In the duplicates you have to replace the variable v_one by the proper variable (v_two...) in the first decision; the second decision remains the same
Test.
Lilybiri

When i burn a playlist to CD, how to get the track names on the CD?

When i burn a playlist to a CD, the tracks are all there and play just fine. But when i look at the track names on the CD, they're just "Track 1", "Track 2" etc. the tracks on the playlist itself are all named with fulll information. How can i burn the CD so the track info will be included?

Try changing the Disc format to Audio CD in iTunes preferences.
If you burn it as a data CD, it will only be playable on computers (and a small number of other players).

Is 'InstallSecurityCentral_787.exe really a Mozilla file or a trojan or virus carrier. It has popped up twice while using Firefox stating I have viruses but Comodo does not agree!

A window purporting to be a 'Firefox security alert' has popped up twice when opening websites (not the same site each time) stating I have viruses performing a scan stating there are 98 viruses but listing only 9 and stating I should download a program called InstallSecurityCentral_787.exe from http:// swocmod. ce. ms.
I am suspicious that this is a ploy to get me to load a trojan or virus and would appreciate advice on the subject.
I have run a Comodo virus test on the file and it came up clean but as it is a link loader and not the actual program this is not surprising.
A Comodo scan on Sunday 05/06/2011 did not find the files listed by the alert?
Regards astralcc
''Edited to disable the link - TonyE''

That is not from Mozilla, it will be malware, do not install it.
There are many sites that will present you with a fake security alert trying to get you to install software. The genuine Firefox security alert will just warn you about a malicious site, it will not perform a scan or warn you that you have viruses installed and will not tell you to download any software.

Waveburner 1.1.2 - Burned CD has pops / click in the track

Similar Messages

Maybe you are looking for