WDPortalNavigation.navigateAbsolute() does not work in QA environment

I have used WDPortalNavigation.navigateAbsolute() to navigate to a different iview in the portal. It works fine in Dev, but the same code is not displaying the iview in QA environment. I confirmed that I views exists in QA and it executes from the navigation path. The PCD Path matches as imported in QA. It is erroring out only when executed through a button click in Web Dynpro using WDPortalNavigation.navigateAbsolute().
I dont know if there are any settings that I need to change. Any help is greatly appreciated.
Here is the code I have that works perfectly in Dev.
WDPortalNavigation.navigateAbsolute("ROLES://pcd:portal_content/com.abc.portal/com.abc.iviews/com.abc.iviews.folders.planning_queries/com.abc.iviews.planning.init_pln_na",WDPortalNavigationMode.SHOW_EXTERNAL_PORTAL,"","","");
Thanks

Hi,
Have you got solution to your problem. If yes, then please share with me.
Regards,
Anubha

Similar Messages

WDPortalNavigation.navigateAbsolute is not working correctly.

Hi All,
I have a page in portal.When the user clicks on this page then a web dynpro java application iview will be called.
In this an wd java application runs. It checks for some data base entry and if that entry exist then we navigate to a new page in the portal.I have used
WDPortalNavigation.navigateAbsolute api in my wd java component.
The issue is
I am getting an error while using this api WDPortalNavigation.navigateAbsolute.
The code which I have written is
WDPortalNavigation.navigateAbsolute("my pcd address",WDPortalNavigationMode.SHOW_INPLACE,WDPortalNavigationHistoryMode.NO_HISTORY,"");
The error is
NavigationNode.addExtConnectorKeytoEnv: Exception
[EXCEPTION]
java.lang.NullPointerException: while trying to invoke the method java.util.Hashtable.remove(java.lang.Object) of a null object loaded from local variable 'env'
at com.sapportals.portal.navigation.NavigationNode.addExtConnectorKeytoEnv(NavigationNode.java:491)
at com.sapportals.portal.navigation.NavigationNode.getRelatedSeeAlsoNodes(NavigationNode.java:1194)
at com.sapportals.portal.navigation.NavigationNode.getRelatedSeeAlsoNodes(NavigationNode.java:1256)
at com.sapportals.portal.navigation.TargetsiView.doOnNodeReady(TargetsiView.java:116)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:390)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher$1.service(RequestDispatcherFactory.java:168)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:270)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher.handleEvent(RequestDispatcherFactory.java:158)
at com.sap.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:242)
at com.sap.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:342)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:345)
at com.sapportals.portal.pb.PageBuilder.createAndAddEmbeddediView(PageBuilder.java:197)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:469)
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:280)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:711)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:390)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:878)
at com.sap.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:429)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher$1.service(RequestDispatcherFactory.java:168)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:270)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher.handleEvent(RequestDispatcherFactory.java:158)
at com.sap.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:242)
at com.sap.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:342)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:345)
at com.sap.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:465)
at com.sapportals.portal.prt.connection.ServletConnection._handleRequest(ServletConnection.java:224)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:101)
at com.sap.portal.prt.dispatcher.DispatcherServlet.service(DispatcherServlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:103)
at com.sap.portal.http.EnrichNavRequestFilter.doFilter(EnrichNavRequestFilter.java:49)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.portal.prt.dispatcher.CustomHeaderFilter.doFilter(CustomHeaderFilter.java:58)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.portal.http.EnrichNavRequestFilter.doFilter(EnrichNavRequestFilter.java:49)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:432)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Please help me to resolve this issue.
REgards,
Anand

Hi Samuli,
The above mentioned problem is resolved by referring to the KBA. I have awarded points to you.
But I am facing one more error in my log.
Once the user clicks on the web dynpro iview the application on portal runs fine but in the log I am getting an error message for that user. It just shows the system.err and I dont get any details in the log.
PFA the error log
WD java application name is – dc-wd-stc-bi-disclaimer.
This error we get only when user clicks on the web dynpro iview referring to this application in portal.

Generation of Survey URL does not works on Web Environment

Hi experts!
I'm new on SAP, and I'm having some problems when generating survey URL.
I have created a survey using the transaction crm_survey_suite, and already done the configurations of the bsp code on "Survey Repository".
When I try to test the code, it is working fine, with no bugs.
In the SAP GUI, when I click on "Generate URL", I can generate and test it with no problems... But, when I try to access my Survey on Web Environment and I click on "Generate URL", the button is not available to be clicked.
What should I do to turn this button available on Web Environment?? Should I activate something?
Please someone help me in resolving this, I am stuck on this for the past few days.
Thanks!!!
Talita.

Hi Dan Zhang,
Thanks for your post.
I have reproduced this scenario in my TFS 2013 Update 4 Server and received the same result.
For this scenario, please submit it to Microsoft Connect Feedback portal at:
https://connect.microsoft.com/VisualStudio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Firefox does not work after update to 3.6.6 (and all later revisions)

(EDIT: I found the exact revision from which the Firefox is not starting, it is 3.6.6 so I changed them throughout this post, previous revision value was 3.6.8)
I am using Windows 7 x64
After Firefox recently updated to 3.6.6 it does not work any more. The application is listed in task manager but it does not do anything. There is no user interface or anything. Only way to interact with it is "End process". Starting in safe mode or starting Profile manager is not possible.
I tried all possible and suggested solutions in mozilla KB, this and other forums but without success (windows safe mode, firefox safe mode, renaming firefox, waiting, checking for firewall or malware/virus issues, deleting profile, uninstall, clean reinstall and every possible combination of those that I could think of). Always the same result, no error message, firefox shown in task manager and that's it.
When I do clean install of all later firefox revisions starting from 3.6.6 the problem remains, including latest Firefox 4 beta6.
I have no issues with any firefox versions on my Vista laptop, so I would guess that something in my windows environment is not suitable for newer versions of firefox.
As I cannot find official older 3.6.x revision of Firefox, I am currently using 3.5.13 and it works flawlessly.
Any help is appreciated, I ran out of ideas.

You can try a direct connection and select No Proxy in the connection settings.
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
Also do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

Minetest translation does not work on my machine.

Hey there.
After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
Since no-one seems to know what’s going on I decided to post my question here, too.
It sems like the translation feature in Minetest does not work on my machine for unknown reason.
The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
Here’s some relevant system information.
$ uname -rms
Linux 3.16.1-1-ARCH x86_64
$ minetest --version
Minetest 0.4.10
Using Irrlicht 1.8.1
Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
$ pacman -Ql minetest | grep locale/de
minetest /usr/share/locale/de/
minetest /usr/share/locale/de/LC_MESSAGES/
minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
$ locale
LANG=de_DE.utf8
LC_CTYPE="de_DE.utf8"
LC_NUMERIC="de_DE.utf8"
LC_TIME="de_DE.utf8"
LC_COLLATE="de_DE.utf8"
LC_MONETARY="de_DE.utf8"
LC_MESSAGES="de_DE.utf8"
LC_PAPER="de_DE.utf8"
LC_NAME="de_DE.utf8"
LC_ADDRESS="de_DE.utf8"
LC_TELEPHONE="de_DE.utf8"
LC_MEASUREMENT="de_DE.utf8"
LC_IDENTIFICATION="de_DE.utf8"
LC_ALL=de_DE.utf8
$ cat /etc/locale.gen
de_DE.UTF-8 UTF-8
en_DK.UTF-8 UTF-8
en_US.UTF-8 UTF-8
According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
16:47:01: INFO[main]: path_share = /usr/share/minetest
16:47:01: INFO[main]: path_user = /home/dirk/.minetest
16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
Irrlicht log: Irrlicht Engine version 1.8.1
Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
Irrlicht log: Using renderer: OpenGL 3.3.0
Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
Irrlicht log: OpenGL driver version is 1.2 or better.
Irrlicht log: GLSL version: 3.3
16:47:01: INFO[main]: text_height=22
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: INFO[main]: Waiting for other menus
16:47:01: INFO[main]: Waited for other menus
16:47:01: INFO[main]: Audio: Initializing...
16:47:01: INFO[main]: Audio: Vorbis extension NOT present
16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
16:47:01: INFO[main]: GUIEngine: Initializing Lua
16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
16:47:05: INFO[main]: Audio: Deinitializing...
16:47:05: INFO[main]: Audio: Deinitialized.
16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
16:47:05: INFO[main]: Searching worlds...
16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:05: INFO[main]: Spielwelt
16:47:05: INFO[main]: 1 found.
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
… or on nopaste.info for better readability.
Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
Hints are highly appreciated Thanks in advance!
Kind regards,
Dirk

Hi there...
It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
It seems that it has not figured out that it needs to open iPhoto 6.
Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
I am using the latest and greatest 10.4.4, Safari is 2.0.3.

Flickr set up does not work

When I try to upload a photo to Flickr this message keeps appearing:
"Do you want to set up iphoto to publish to flickr?"
I have followed the set up process a dozen of times, but iPhoto keeps asking the same question. In Flickr I can see the permission to use iPhoto uploader, but iPhoto doesn't seem to recognize it.
I have searched all over the internet and cannot find a solution.

Exact same problem here.
Environment:
- iPhoto '09, running on Leopard 10.5.8.
- I did not have a Flickr account yet.
Steps to reproduce:
1) Clicked the "Flickr" button in iPhoto 09, received popup "Do you want to set up iPhoto to publish to Flickr".
2) Clicked "Set Up", got redirected to Yahoo Flickr in Safari.
2) Created my Yahoo account as prompted.
3) Clicked "Flickr" button in iPhoto 09 again. Got same popup, clicked "Set Up" again.
4) In the newly opened Safari window, entered my Yahoo credentials. When asked, confirmed that I wanted "iPhoto Uploader" to have full access to my Flickr albums.
5) Verified that iPhoto Uploader had indeed been added to the access list in Flickr using the link provided on the Flickr webpage.
Actual result:
* Popup disappears from iPhoto, but immediately re-appears asking for same "Set Up" procedure.
I followed this endless loop about 5 times, each time entering my Yahoo credentials, each time verifying that iPhoto Uploader had been granted access to Flickr.
Conclusion:
* iPhoto 09 has high-severity bug, Flickr functionality does not work at all.

CMC does not work after deploying to Websphere

Description of Problem or Question:
We have an installation of BO XI R2 SP2 on Tomcat (default installation).
Now we installed Websphere Application Server 6.0 on the same server and deployed BO war files on it.
The existing installation of Infoview & CMC on Tomcat works as it did before.
But, CMC that runs on Websphere does not work.
Product\Version\Service Pack\Fixpack (if applicable):
Business Objects XI R2 - Service Pack 2
Tomcat 5.0.27 (installed by default)
Websphere Application Server 6.0.0.2
Relevant Environment Information (OS & version, java or .net & version, DB & version):
Windows 2003 Server R2, Enterprise Edition, SP2
Sporadic or Consistent (if applicable):
Consistent
Steps to Reproduce (if applicable):
Followed all the steps mentioned in "Deploying on WebSphere" section of "xir2_bip_install_en.pdf"
Deployed the following war files from the following location in the order mentioned with context roots as listed.
C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\java\applications\sp2updates
webcompadapterSP2.war /businessobjects
jsfadminSp2.war /jsfadmin
jsfplatform.war /jsfplatform
adminSP2.war /businessobjects/enterprise115/adminlaunch
desktopSP2.war /businessobjects/enterprise115/desktoplaunch
stylesSP2.war /styles
http://localhost:9080/businessobjects/enterprise115/desktoplaunch
Infoview works as expected.
http://localhost:9080/businessobjects/enterprise115/admin
CMC doesnot work. IE Says "HTTP 500 Internal Server Error".
What has already been tried (where have you searched for a solution to your question/problem):
On searching the web-forums, I found this:
http://www.forumtopics.com/busobj/viewtopic.php?t=112151
So, I tried to install WCA for Websphere. The scenario mentioned in that article deals with new installation of BO.
But, since ours is an existing installation, I cannot install WCA for websphere.
I do not want to re-install BO.
Please advise.
Thanks,
Chris

Hi,
The following is the log created when I try to open CMC.
com.ibm.ws.webcontainer.webapp.WebApp logServletError SRVE0293E: [Servlet Error]-[wccontroller]: java.lang.NoClassDefFoundError: javax.servlet.http.HttpServletRequestWrapper
at com.ibm.oti.vm.VM.findClassOrNull(Native Method)
at com.ibm.oti.vm.BootstrapClassLoader.loadClass(BootstrapClassLoader.java:62)
at java.lang.ClassLoader.loadClass(ClassLoader.java:633)
at java.lang.ClassLoader.loadClass(ClassLoader.java:635)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:300)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:363)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:347)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:83)
at java.lang.ClassLoader.loadClass(ClassLoader.java:635)
at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:90)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:466)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:466)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at java.lang.J9VMInternals.verifyImpl(Native Method)
at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
at com.businessobjects.enterprise.wca.servlets.WCAControllerServlet.init(Unknown Source)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:325)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.init(ServletWrapperImpl.java:165)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:628)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:443)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:175)
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3610)
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:274)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:926)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1557)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:173)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:455)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:384)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:272)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:202)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:766)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:896)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1527)

Configuration Template Builder WL8.1 does not work

Hello,
     After spending nearly 2 days now trying to get a Configuration Template
built, I've concluded this simply does not work. Has anyone used the
Config Template builder to package a semi-complex application on top of WLI?
     I'm trying to have 2 of my applications, the JMS and JDBC resources,
and a WLI event generator packaged up for easy deployment to someone
else's server configuration. The problem with this is that there are
required resources for WLI, namely a database. The Pointbase database
included for WLI does not get included in the template automatically.
There are also some flat-out bugs:
If you choose to include a resource adapter "application", such as
jms-xa-adp.rar, the template builder does not bundle this in the
template and deploy it correctly. The template builder restricts you to
putting applications in the relative path starting at ./
For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
the template builder defaults to put it in ./lib of your template.
However, when you create a domain with the template, jms-xa-adp.rar does
not get placed in your ./lib directory. This causes you to then go and
manually edit your config.xml to point back at $WL_HOME/server/lib or to
manually copy jms-xa-adp.rar into your ./lib directory (which the
template mechanism should do for you).
Relative paths in the config.xml file require you to execute the config
builder from the directory of the domain you are making a template for.
The template builder should instead be smart enough to realize that
relative paths in the config.xml file are relative to the directory that
the config.xml is in, not the one you are running the template builder
from. You'll get an error when trying to create the template cause it
won't find the resources if you're not in that directory.
If anyone has successfully used this to package a WLI application in a
template, please share your experiences and how to do so. In the
meantime, I'm claiming there is no way to nicely package up a server
configuration for a WLI app in Weblogic, and this is a big shortcoming.
Weblogic needs a simple transferrable way of creating server
configurations (it tries to do this with the template, but that is
failing). With JBoss, for example, you simply copy your server directory
into another installation. This doesn't work with Weblogic unfortunately
because it puts hard-coded paths in the config.xml file.
Thanks

Russ,
     Thank you for the detailed responses. The only one I'm currently
struggling with still is the #5, with the scripts between the two. One
of the major benefits of using a J2EE App Server is supposed to be the
portability between servers. I find it disconcerting that BEA Weblogic
restricts me to the platform I created the domain on by creating
platform-specific startup/shutdown scripts for only the platform created
on. It's understandable that a script converter would be difficult, but
at least both the .sh/.cmd files should be created from the first time
you make a domain. If the user only wants one or the other, they can
delete the appropriate one. It's also understandable that the
users/deployers shouldn't have to manually convert a startup/shutdown
script to take the domain to a different box.
     JBoss clearly has BEA beat on ease of deployment here. Their model is
the concept I'm thinking of: you have some generic startup/shutdown
scripts that can load a platform-independent server configuration. You
truly can copy directories as-is between JBoss installations.
     I was hoping to package up a server domain for use on any of the
supported platforms, but since I don't have the time to manually convert
the startup/shutdown scripts, I'm going to have to tell people it's only
for Solaris now.
     Hopefully BEA can fix this in a future SP. There's no need for this
platform-dependency. Also, if the Windows version can generate both
scripts at creation time, then the Solaris should be able to do this as
well (or at least give you the option).
Thanks again for the replies
russ wrote:
Hi Steven,
I have several comments and questions about your last two posts. I will try to
address them in order.
1) "The Pointbase database included for WLI does not get included in the template
automatically."
     By default the template builder only includes the *.cmd and *.sh files in the
template from your domain directory. If you begin building with an existing
domain template all files that were in the template will get included. This was
done because there is no way for the builder to automatically determine all the
files that are required by your template/domain and we steered away from recursively
including all files from the directory so that unused files were not needlessly
included. We can extrapolate some files based on the application paths in the
config.xml, but the rest is left up to the template builder to be aware of what
is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
files included in your template just select these files on the ?Add Files? panel
of the template builder and add them to the ?Domain Directory?.
2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
the template builder does not bundle this in the template and deploy it correctly.?
     The template builder considers application files to be in two categories: Imported
or Internal. When you are at the ?Add Applications? panel of the builder you
will see a checklist of all the applications that are in the domain you selected.
On the right hand side there are two text fields. The top one displays the application
path as it is currently set in the config.xml of that domain. The bottom field
will be different depending on what category the application falls into. As you
click on each application in the list, you may notice that the bottom field may
change from an editable field titled ?Imported Application Path? to a non-editable
field titled ?Internal Application Path?. The difference between the two categories
is that an ?Imported? application?s files will be included in the template jar.
An ?Internal? application?s files will not be included in the template jar because
they are considered internal to the weblogic installation. The jms-xa-adp.rar
should fall into the internal category and should not get included in your template.
     From what you are describing it sounds like the builder attempted to import that
application when it should not have. In an attempt to recreate the problem you
are seeing I deployed that Connector Module through the WLS console and ended
up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
from this domain, the builder recognizes this as an internal path and does not
include it inside my template. If the current application path you had looks
different from the one above, that may explain why the builder was attempting
to import it. What was the value of the ?Current Application Path? for that application
deployment?
3) ?Relative paths in the config.xml file require you to execute the config builder
from the directory of the domain you are making a template for.?
     The builder is ?smart? enough to determine relative paths. You should not have
to invoke it from the domain directory you are working with. There is a known
bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
cause it to not find files with relative paths in your domain directory if the
application path in the config.xml is just a ?.?. If this is the case, you should
see a FileNotFoundException when you attempt to create the template. This will
be fixed in SP2 and you can work around this problem by changing those paths to
?./? instead. If this was not the case, what was the path the wizard choked
on?
4) ?Looking through the config file, it seems that it's all of the WLI components
that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
an absolute path, not sure if that is WLI or WLS. ?
     BEA_WLS_DBMS_ADK is an integration application. If you created the original
domain using the configuration wizard most of the applications in an integration
enabled domain will reference paths inside of you installation directory or ?internal?
paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
domain into the builder it shows this application as ?internal? and the ?Internal
Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
This will be set as the path value of this application in the config.xml that
will be included in the template you build. When you later use the Configuration
Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
of the installation directory of the machine you are creating it on.
     If you were to Change these to relative paths, as Mark previously suggested,
it will only work if you copy the domain directory to the same location relative
to your installation directory on the target machine. Also, if you copy the domain
in this manner you will more than likely run into problems with your start/stop
scripts and be forced to hand modify all the paths contained within. The configuration
wizard tries to alleviate these problems and make the configuration entirely portable.
This gives the user who creates the domain from your template the ability to
put it anywhere they want regardless of the paths in the config.xml.
5) ?However, there is another major problem with the Template Builder: it only
includes the startup/shutdown script for the platform you create the template
on. ???I built the template on Solaris with the UNIX scripts. However, I tried
to create a new config on Windows with this template, and the scripts were not
converted to .bat files!?
     As I stated previously, the builder will only include *.cmd and *.sh scripts
into your template by default. If you created the domain on a unix platform using
the configuration wizard it will not extract the *.cmd files since these aren?t
considered to be useful on unix. If you were then to attempt building a template
from this domain and take it onto a windows platform, it will obviously be missing
any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
because they can still be useful if a user has an MKS or Cygwin type environment
installed. The config wizard and template builder do not have the ability to convert
scripts. The builder will only include existing scripts that are in your domain
directory and automatically determine any necessary string substitutions that
will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
files since these are more commonly associated with Win 95/98/ME.
     I will be happy to answer any more questions you may have and would also like
to take a look at your domain configuration to try and get a better understanding
of the problems you are encountering.
thanx,
russ

Please Help! Drag and drop does not work in Adobe AIR 3.1 (FlashBuilder 4.6)

I am working on a PC is made of air and flashbuilder 4.6.
Drag and drop application does not work in Flash Builder 4.6.
However, the same source will work with Flash Builder 4.5.
Please help me.
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 backgroundColor="#323232" width="100%" height="100%"
 initialize="init(event)"
 nativeDragEnter="onDragEnter(event)"
 nativeDragDrop="onDragDrop(event)">
 <fx:Script>
 <![CDATA[
 import mx.events.FlexEvent;
 protected function init(event:FlexEvent):void
 addEventListener(NativeDragEvent.NATIVE_DRAG_ENTER, onDragEnter);
 addEventListener(NativeDragEvent.NATIVE_DRAG_DROP, onDragDrop);
 private function onDragEnter(event:NativeDragEvent):void
 if (event.clipboard.hasFormat(ClipboardFormats.FILE_LIST_FORMAT))
 NativeDragManager.acceptDragDrop(this);
 private function onDragDrop(event:NativeDragEvent):void
 var arr:Array;
 arr = Array(event.clipboard.getData(ClipboardFormats.FILE_LIST_FORMAT));
 startImage.source = (arr[0] as File).url;
 ]]>
 </fx:Script>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <s:BorderContainer id="bc" borderStyle="solid" width="200" height="80%"/>
 <s:Image id="startImage" width="100%" height="100%"
 horizontalAlign="center" verticalAlign="middle"/>
</s:WindowedApplication>

Thank you answers, but it was not the answer I wanted.
[Problem]
* Flash Builder 4.5.1(updater) or Flash Builder 4.6
- If you have installed on pc, does not work adobe air drag and drop
[Solution]
1. Reinstalling the Windows 7 (32bit).
2. Install Flash Builder 4.5.
3. Flash Builder 4.5.1 updater and Flash Builder 4.6 does not install.
 (Instead of using Flex SDK 4.6 is set up)
In addition, Windows7 64bit environment does not work drag and drop.
Is there another solution?

Enforcing JRE version for Applet does not work - 1.4.2

Hi,
Our application (Applet) requires JRE 1.4.2 .
I believe I need to use STATIC VERSIONING as we want the client desktop to ONLY use 1.4.2 for our applet.
So I followed the instructions mentioned in
http://java.sun.com/j2se/1.4.2/docs/guide/plugin/developer_guide/using_tags.html#in-ie
and
http://java.sun.com/products/plugin/versions.html
But for some reason the JAVA Installer fails to install the package.
It comes back with this pop-up error message:
Error - Java(TM) Installer
Unable to download http://java.sun.com/update/1.4.2/1.4.2-b28.xml for installation
Here is the jsp code snippet:
<center>
<OBJECT classid="clsid:CAFEEFAC-0014-0002-0000-ABCDEFFEDCBA" id="myapplet" NAME="myapplet"
 width="650" height="426" border="1" align="baseline"
 codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,0">
 <PARAM name="code" value="com.statestreet.gia.ui.applet.ComponentApplet">
 <PARAM name="codebase" value="/jars">
 <PARAM name="type" value="application/x-java-applet;jpi-version=1.4.2">
 <PARAM NAME="cache_option" VALUE="Plugin">
 <PARAM NAME="cache_archive" VALUE="jar1.jar,jar2.jar">
 <PARAM name="scriptable" value="true">
 <PARAM NAME="mayscript" VALUE ="true">
 <center>
 This page requires the Java Runtime Environment Plug-in. If you see this message,
 the automatic install probably failed. Please <A href="http://java.sun.com/j2se/1.4.2/download.html">click here
</A>
 to manually install the environment. If prompted, please choose "Run this file from its current location" or "Open"
. 
 Accept all of the defaults during the installation. When the installation completes, please click the refresh butto
n on your browser. 
 If this process does not work, please contact the Help Desk.
 
 </center>
</OBJECT>
</center>I have tried changing the codebase by removing the "#Version part.." but still no result.
Any suggestion is greatly appreciated.
thanks
hp

Yeah, after hours of searching it must be so that my son has a 8GB i.e. a 2G version and mine just happens to be the 3G as I bought mine a month later....did not know how to know the difference but now solved, thnx.

LD_ASSUME_KERNEL does not work in recent distros. How to avoid?

LD_ASSUME_KERNEL=2.4.XX does not work in all recent distros.
$ export LD_ASSUME_KERNEL=2.4.20
$ ls
ls: error while loading shared libraries: librt.so.1: cannot open shared object
EBS contains very old cmponents like MWA wich not compiled without this setting. How to avoid errors?

You can unset LD_ASSUME_KERNEL and EBS 11i (11.5.9 and 11.5.10) will work fine on 2.6.16 kernels (SLES-10 and RH 5.0).
The following instructions should get you going:
1) Setup the environment as you would for running Applications on RH 4 or SLES9
I.E. follow Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
2) Remove any LD_ASSUME_KERNEL references in O/S /etc/profile.d files
3) Comment out LD_ASSUME_KERNEL entries in $ORACLE_HOME/appsutil/bin/adgetlnxver.sh and $AD_TOP/bin/adgetlnxver.sh
if [ ${setflag}x = "x" -a $os = "Suse" ]; then
# LD_ASSUME_KERNEL="2.4.21"
# export LD_ASSUME_KERNEL
     os="Suse"
fi
if [ ${setflag}x = "x" -a $os = "RH" ]; then
# LD_ASSUME_KERNEL="2.4.19"
# export LD_ASSUME_KERNEL
     os = "RH"
fi
If doing a rapid install, the database startup will fail and rapidwiz will prompt to ignore or retry. At this point, edit $ORACLE_HOME/appsutil/bin/adgetlnxver.sh as shown above and click on retry. It will then run to the autoconfig step at the end and error out. Just hit cancel, edit $AD_TOP/bin/adgetlnxver.sh and run autoconfig.
On Suse, one needs compat-gdbm for libgdbm.so.2
rpm -Uhv compat-gdbm-1.8.0-7.i586.rpm
Preparing... ########################################### [100%]
1:compat-gdbm ########################################### [100%]
Also in /usr/lib run ln -s libdb.so.2 libdb.so.3
Ref:
Note:300807.1 for Suse
create symbolic link called libdb.so.2 pointing to libdb.so.3, as follows:
$ cd /usr/lib
$ ln -s libdb.so.3 libdb.so.2 (or install db1-1.85-85.1 which does the same)
Note:294043.1 for Red Hat
As per an internal Bug 4045349, this is an issue with O/S side installation of compat-db rpm.
libdb.so.3 gets installed when compat-db rpm is installed.
- The O/S installation CD would contain compat-db
e.g compat-db-4.1.25-6.i386.rpm ( may change as per your version ).
- Manually install the compat-db rpm
e..g "rpm -ivh compat-db-4.1.25-6.i386.rpm"
OR
Note:345172.1
A library is missing: libdb.so.2 is from gnome-libs-1.4.1.2.90-34.1.i386.
This error also occurs in SLES9, same cause, slightly different resolution. SLES9 comes with libdb.so.3 and libdb.so.4 but not libdb.so.2 - need to install db1-1.85-85.1 to get libdb.so.2.
4) In order to relink cplex library executables (MSC, MSO, MSR, MST, WIP, etc), edit $AD_TOP/bin/adrelinknew.sh and add the following LD option (-Wl,--noinhibit-exec) in the LINUX section:
LINUX)
LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -ldl'
DEBUG_LDFLAGS='-g -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -ldl'
exe_line='ELF .*executable'
SHRLIB_LD='gcc'
LD='gcc'
SHRLIB_LDFLAGS='-L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -shared'
if test -f "/etc/redhat-release"; then
     CPP_LIBS='/usr/lib/libstdc++-2-libc6.1-1-2.9.0.so'
elif test -f "/etc/SuSE-release"; then
     CPP_LIBS='/usr/lib/libstdc++.so.2.9'
else
CPP_LIBS=''
fi
CPP='g++'
CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs
set CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs
to CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -Wl,--noinhibit-exec'
After this chance, you can apply any MRP, ASCP patch and all executables will relink correctly. You can also use adadmin to relink all executables and it completes without error.
5) Discoverer 4.1.38.08 Follow Metalink Note 280598.1 Discoverer 4i On Linux: Required Patch and Configuration for Discoverer Server Stability to use JDK 1.3.1 and oadj. I updated the autoconfig template files with this change after applying 3895177. Discoverer viewer and plus standard BIS reports all open correctly on SLES-10

Open Hub does not work after upgrade

We just upgraded our BW production system from 3.0b into 3.5 and we are running support package level 09. Now we are facing serious problems with Open Hub.
After upgrade Open Hub delivering data from infocube into
csv-files does not work. When running the InfoSpoke it
will deliver 0 data records even though it should bring considerable amount of data.
There is no error message or short dump, it just do not deliver any data. InfoCube has data in place and it is available for reportoing. Extraction is made in FULL-mode and there is no transformations. Funny thing is that extraction from ODS or InfoObject works perfectly fine.
Has anyone idea how to solve this?
Thanks in advance,
JL

We ran into the same issue as Jari Laine today.
We just upgraded our BW sandbox environment from 3.0b into 3.5. We are running support package level 13, though. Now we are facing serious problems with Open Hub.
After the upgrade, our Open Hub which delivers data from an info cube into CSV-files does not work any more.
When running the Info Spoke it will deliver 0 data records even though it should bring a considerable amount of data.
There is no error message or short dump, it just does not deliver any data. The Info Cube has data in place and it is available for reporting.
The Extraction is made in FULL-mode and there are no transformations.
Has anyone an idea how to solve this?
Thanks in advance,
Marc

Sync with Itunes does not work

Hi,
I reinstalled latest Itunes completly but still sync with outlook 2007 does not work.
Itunes says Sync finished, but nothing is synced.
Here is the log:
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] iTunes.exe begins
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] "C:\Programme\iTunes\iTunes.exe"
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ALLUSERSPROFILE=C:\Dokumente und Einstellungen\All Users
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] APPDATA=C:\Dokumente und Einstellungen\mispde\Anwendungsdaten
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] asl.log=Destination=file;OnFirstLog=command,environment
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CIHOLOSCLI=C:\Programme\Seagate Software\Open Olap\
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CLASSPATH=.;C:\Programme\Java\jre6\lib\ext\QTJava.zip
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CommonProgramFiles=C:\Programme\Gemeinsame Dateien
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] COMPUTERNAME=MISPDE0
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ComSpec=C:\WINDOWS\system32\cmd.exe
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] FPNO_HOSTCHECK=NO
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOME=C:\Programme\Computer Associates International, inc.\CCC Harvest
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEDRIVE=C:
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEPATH=\Dokumente und Einstellungen\mispde
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOCALHARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOGONSERVER=\\ERLCNDC1
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NewEnvironment1=C:\Programme\Vodafone\Vodafone Mobile Connect\"Optimization Client"
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NUMBEROFPROCESSORS=2
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] OS=Windows_NT
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] Path=C:\Programme\Gemeinsame Dateien\Apple\Apple Application Support\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live;C:\Programme\CA\SharedComponents\PEC\bin;C:\WINDOWS\system32;C:\WINDOWS;C: \WINDOWS\System32\Wbem;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;C:\oracle\ora102\bin;L:\deployment files\runtime;L:\development\client;D:\FOUNDA~1\fnd301\deployment files\runtime;D:\FOUNDA~1\fnd301\development\client;C:\Programme\Samsung\Samsun g PC Studio 3\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Programme\CA\AllFusion Harvest Change Manager;C:\Programme\QuickTime\QTSystem\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PERL5LIB=C:\oracle\ora102\perl\lib\5.8.3\MSWin32-x86;C:\oracle\ora102\perl\lib\ 5.8.3;C:\oracle\ora102\perl\5.8.3\lib\MSWin32-x86-multi-thread;C:\oracle\ora102\ perl\site\5.8.3;C:\oracle\ora102\perl\site\5.8.3\lib;C:\oracle\ora102\sysman\adm in\scripts
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_ARCHITECTURE=x86
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_LEVEL=6
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_REVISION=0f0b
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ProgramFiles=C:\Programme
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] QTJAVA=C:\Programme\Java\jre6\lib\ext\QTJava.zip
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTARCH=i86_w32
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTHOME=C:\Programme\CA\SharedComponents\PEC
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SESSIONNAME=Console
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SQLBASE=C:\Oracle\ora102\NETWORK\ADMIN
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemDrive=C:
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemRoot=C:\WINDOWS
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TEMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TNS_ADMIN=C:\Oracle\ora102\NETWORK\ADMIN
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDNSDOMAIN=CORPNET.IFSWORLD.COM
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDOMAIN=CORPNET
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERNAME=mispde
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERPROFILE=C:\Dokumente und Einstellungen\mispde
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] VS90COMNTOOLS=C:\Programme\Microsoft Visual Studio 9.0\Common7\Tools\
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] windir=C:\WINDOWS
[3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] receive_message: Could not receive secure message: -1
[3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] readthread: Could not receive message
[7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Cancelling all sync plans.
[7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Goodnight, Gracie.
Please help me!

*I just spoke with two different senior advisors from Apple one whose name was Matt and the other whose name was Zachary. They both were extremely rude and were not helpful at all. I explained the same exact scenario to them about how I just updated to iTunes 9.1.1 and that now my iPhone will not sync.*
The ONLY help they could give me was to purchase a plan for either 29.99 or 69.99
The reason no one from Apple will help us is because this company is based on greed. I am sure they knew about this bug that prevents thousands of users from syncing but I am also sure they assumed that we would pay the 29.99 or 69.99 for them to fix the problem. I honestly feel as though this is a scam to make more profit off of us.
There is absolutely NOTHING they can do to help they said except for me to purchase one of those two plans they offer. My question is WHY THE **** SHOULD I PAY FOR SOMETHING THAT I AM NOT AT FAULT FOR? It should be there moral duty and responsibility to fix this bug yet because they know they will profit from it they have no intentions on doing so. The only thing I can really suggest is calling Apple and telling them how you feel. The more people who voice there opinions the better (just be prepared for them to tell you the ONLY thing they can do to fix the problem THEY created is by making YOU pay more money to fix it).
I am extremely disappointed as a loyal Apple customer and this has seriously made me reconsider ever buying another Apple product.
This company is morally and ethically wrong.

WDPortalNavigation.navigateAbsolute() does not work in QA environment

Similar Messages

Maybe you are looking for