We are facing an issue of Fiscal year varint for 2LIS_03_UM DS

Dear All,
When I am extracting the data for 2LIS_03_UM DS from Quality system ,we are faicng an issue of Fiscal year varint (V3 Type)
I have also transferred the Global settings items in to BI system.
Please let me know something else required from my side.
Regards,
Srinivas Padugula

Go to EXTRAS - DISPLAY GENERATED PROGRAM -
here you will get the program that is generated for the transformation... go the line where the system generated code FILLS the FYV...
It should be something like this
*<<<    Rule ID: '12'.
          IF lssupp-_12 EQ rs_c_false.
            currrule-ruleid = '12'.
      Step ID: '1', Type: 'TIME'.
            currrule-stepid = '1'.
            l_fscvtval = G1-FISCVARNT.
            IF <_ys_SC_1>-CALDAY CO ' 0'.
              CLEAR G1-FISCPER3.
            ELSE.
              l_timvl = <_ys_SC_1>-CALDAY.
Put a break - point there.. then in the DTP go in debug mode.. you will reach the above code... you can simulate the error why its coming
What are the other time parameter you have in your cube?? I think its issue of FVY when you load data to another dependent time character... e.g. 0FISCPER3... FVY defines what value should go in 00FISCPER3... if the FVY is normal.. 0FISCPER3 = 1... if FVY is from April - march... 0FISCPER3 = 4
Edited by: Shailesh Khandarkar on Dec 15, 2010 10:03 AM

Similar Messages

There are no depreciation areas to post to in fiscal year 2008

Hi,
Iam facing a problem during Depreciation run in t-code AFAB.
here are no depreciation areas to post
   There are no depreciation areas to post to in fiscal year 2008
    Message no. AA695
Diagnosis
    You have requested a depreciation posting run for fiscal year 2008.
    The program has determined that depreciation areas are still open for
    this fiscal year, but according to their configuration, these areas do
    not post depreciation.
Procedure
    Please check your entries.

Hi
Check the settings in OADB for the depreciation areas
Thank You,

We are facing an issue in our COE SAP ECC 6.0 instance

Hi,
We are facing an issue in our COE SAP ECC 6.0 instance. The sequence of steps performed is as given below
1. Start Vendor Creation using Create Vendor: Initial Screen
2. Create Vendor : Address
3. Create Vendor : Control
4. Create Vendor: Payment Transactions
5. Create Vendor: Accounting Information Accounting
6. Create Vendor: Payment Transactions Accounting
7. Create Vendor: Correspondence Accounting
After the above steps are performed the system displays a message Vendor <V No.> was created in company code 1000
If we try to use the above created Vendor in F-90 or FK02 ( Change Vendor details TCode) it throws an error as "Vendor has not been created".
The table LFB1 doesnt have the Vendor associated with the Company Id 1000.
Query: But does anyone WHY the Table is not being updated and WHAT needs to be done to make sure Updation happens in future.
A quick response on this will be greatly appreciated!

HI,
Please chk in the config....
SPRO>MM->Partner Deter->Partner setting in Rebate Arrangement->Define partner schemas for Rebate..
Here please check the partner function "PI" is made mandatory...
You can main the Partner function "PI" in the agreement itself...
Goto-- txn.MEB2-- enter the agreement no... inside click the icon "Agreement Partner" or (Ctrl+F2) and maintain the partner function PI..
Regards
GK.

FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54

Hi all,
I am using Former Budgeting and is configured for Commitment Budget only (not configured for Payment Budget). When I tried posting via GL Document Entry to test FM, I encountered the following error.
[Message no. FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54
Diagnosis:
Posting for the document of value type 54was attempted on a date that has not been opened in FM.
Procedure:
To define open item intervals for FM postings, use the following transactions:
Individual Maintenance of Open Time Intervals
Mass Maintenance of Open Time Intervals]
I have already maintained in transaction FMIR.
The entry is:-
Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
9B Commitment Budget/2010//00 All Account Assignment// / /16
What else do you think could be causing this error?
Regards,
Bernard

Go tcode FMIR.
Ensure that you both entries:-9A Payment Budget and 9B Commitment Budget.
Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
9A Payment Budget/2010//00 All Account Assignment// / /16
9B Commitment Budget/2010//00 All Account Assignment// / /16
Regards,
Bernard

Maintain Fiscal Year Varient for PPM

Dear Expert...
I want to set the fiscal year variant for April to March.
I have maintained fiscal year variant V3 periods and periods text. When i am trying to define planning period type during that i am geting an error-Fiscal variant V3 uses periods not supported by pipeline performance mgmt.
Please suggest me what i need to do for next step.
Thanks
SAP User-Montu

Hi Montu,
Please refer the below links. It has some useful information.
Pipeline Performance Management - fiscal quarters
http://help.sap.com/saphelp_crm70/helpdata/EN/9d/f6a3dbbbd3451f91c57558774c7123/content.htm
Warm regards,
Murukan Arunachalam

Fiscal year change for AA

Hello All,
I have uploaded my legacy assets in DEV client for testing(Transfer date is 31.12.2008)
After uploading, i'm going to check the balances through AR02 report in the FY 2009, but it is giving below error message
Fiscal year change not yet made for company code XXXX
    Message no. AB059
Diagnosis
    You have not yet carried out a fiscal year change for company code XXXX,
    although the current system date is in the new fiscal year.
Procedure
    Carry out the fiscal year change for company code XXXX.
I know we can't open more than two FY's in AA, but what can be done for the uploading assets(Transfer date 31.12.2008).
Can we close current FY in AA module which is 2011?
Please advice me.
Rgds
Murali. N

Dear Rajesh,
Thanks for the reply.
First of all please tell me
My system date is in the FY 2011, and I am checking the report for the FY 2009.
I heard, only we can open two fiscal year in AA.
So, is it possible for me to check the balances in FY 2009 through AR02.
Is there any way to clost the FY 2011 in AA, so that I can work in FY 2009 & 2010.
Please guide me.
Rgds
Murali. N

Issue with Fiscal Year Varient Period modifications for 2012

Hi All,
Can you please advice how the Fiscal Year Varient modified periods be transported to different clients.
The issue is, we have 2012 Periods already setup in DEV and transported to QAS and PRD, now the clinet came up with different periods for 2012. I have modified the periods as requested and captured them in transport.
When the new transport was sent to QAS, the new periods are appended to the old periods, instead of replacing the old periods.
any help is much appreaciated.
Thanks
Shasha

Hi All,
My issue has been resolved, we figured out that we need to delete the existing calender and capture that in transport and then recreate the calender for 2012 with new periods and capture this in the same transport and this works.
Instead of deleting the existing calender we changed the values before, which is the reason it was appedning the previous periods and the new periods.
Thanks
Smitha

Issue with Fiscal Year period - Variable

Hello,
I have requirement where I have two fiscal year variables selections available for the users. Both are independent to each other. FOR EX: A & B
1ST Fiscal year period is straightforward. It is a single variable selection where User enters the fiscal year period then the Key figures data will be available to the user for that particular fiscal year what is selected in the variable screen.
For ex: If user enters 01.2007 then the values will be only for that particular month/period
However, the 2nd Fiscal year period user wants a Range (From and to). This is also a Single selection variable. Here user enters only TO value, which it should go and get the lower value from first variable screen and then it should take the higher value from the 2nd Variable screen and should calculate the result as a range.
How this can be sorted? Can someone please help me to sort this Issue? If we need a customer exit, can you please give me some sample code?
Thanks in advance
Harish

Hi,
Create 3 variable
One for from variable which will user input ZVAR1
2nd to variable will be user input              ZVAR2
3rd variable be variable exit type              ZVAR3
In exit populate the VAR3 by reading the two user input variable.
and use the option
Try this:
<b> when 'ZVAR3.
      if i_step = 2.
        read table I_T_VAR_RANGE into z_t_var_range
                        with key VNAM = 'VAR1'.
        read table I_T_VAR_RANGE into z_t_var_range1
                        with key VNAM = 'VAR2'.
             ZE_T_RANGE-SIGN    = 'I'.
             ZE_T_RANGE-OPT     = 'BT'.
             ZE_T_RANGE-LOW     = z_t_var_range-LOW
             ZE_T_RANGE-HIGH     = z_t_var_range1-LOW
             APPEND ZE_T_RANGE TO E_T_RANGE.
             clear ZE_T_RANGE.
      ENDIF.</b>
Thanks,
Debasish

Facing an error in fiscal year variant in analyzer

Hi Experts,
Whenever i run a query in analyzer iam facing the following error.
"Fiscal year variant X is not maintained for calendar year 2008"
Please suggest on this.
Thanks & Regards
Sameer Khan

Hi,
You need to maintain the values for the infoobject 0fiscperiod in the BW.
You can see in the master data table of this infoobject that this value is not maintained there and thats why it is ginving you the error.
Go to the source system option in the RSA1 right click on your R/3 source system and "Trnsfer global settings"
here chose Fiscal variant and option update tables.
and then start the data load again.
Look for the table
T009
T009B
in the source system and just verify if these table contains the value for error which you are getting.
Thanks & Regards,
Ramnaresh .P.

0FI_AR_4 extraction issue - actual fiscal year

We are having problems with 0FI_AR_4 when extracting actual fiscal year data. For previous fiscal years, we run a full load, but when we tried to initialize the extractor for actual fiscal year there are no records. Cheked RSA3 and same problem. But with in RSA3 with 0FI_AR_3 there is plenty of records.
PI_BASIS is 2005_1_700 level 13, so there shouldn't be any dependece with 0FI_GL_4.
Any ideas on what might be happening ?
Regards,
SJR

if you want you can try to manage the 0FI_AR with delta - launch a init for initialize the data loads and after this create a new infopackage delta to manage the new data
alternatevely you can try with a full repair load
Hope it helps
Andrea

Issue with Fiscal Year Period in Custom Extractor

We have a custom extractor that pulls posting period (PERIO) and Fiscal Year (GJHAR)...once we move it to BW we do a concatenate in the transfer rules to get Fiscal Year / Period. Before we did the ERP Upgrade the concatenate worked and then after the Upgrade it stopped working. I have checked RSA3 and the extractor is not pulling the fields any differently then before. I have also tested the same concatenate in our development system and it is working. Does anyone have any idea what might be happening?
Before we were getting data that looked like 2008001 and now thet data is saying 8 1200.
We also have another custom extractor that does the exact same thing and it is working!
We are stumped....can anyone assist?
Thanks!
Caroline

I dont understand why you had to extract period and year?
Can you pl explain. Do you have other fields in the extractor, if so what are they?
Can you paste your code here to look at.
Ravi Thothadri

Error in Fiscal year close for assets

Hi All,
I did AR29 / ABAWN (revaluation of Assets). But SAP gave me error as
Diagnosis
The fiscal year 2001 is already closed for area 90 in company code 1000.
Procedure
Check the depreciation area specifications in Customizing. If the specifications are correct, use a transaction type that does not post to the depreciation area mentioned above.
In the AR29, i mentioned all date as 01.09.2009.
Then i tried posting asset Acquisiiton (in F-90) in same date & it passed the entry. So i do not know what period is closed & why its showing as year 2001 in error message.
Edited by: Deepak Agrawal on Oct 12, 2009 10:33 AM

In OB52, open periods (for A, K, D, + , M, S) are shown as:
From 01 / 2009 To 12/2010. special period is open from 13/2009 to 16/2009.
This mean 2010 is open for the posting entries
But why its allowing me to post F-90 (asset acquisition entry in 2009) & not allowing revaluation of assets.
Edited by: Deepak Agrawal on Oct 12, 2009 11:14 AM

Cost element creation: no fiscal year defined for given period

hi all,
I am getting the above erroe when I try to create the cost element with the category 1 (primary cost/cost-reducing revenues). If I use category 11 (revenues) then the error is not displayed.
Please advise.
regards,
FS

hi.........
1. first check whether fiscal year variant assigned to company code and controlling area is same.
2. check whether fiscal year variant is year dependent or not.
Regards,
Manish Jain

APO-DP : Change in Fiscal Year Variant for the year 2008

As per earlier Fiscal Year variant configuration, the data has been forecasted in APO system till the end of Year 2008. But recently the fiscal year variant configuration modified in R/3 which has been impacting APO-DP storage buckets which are not matching with that of earlier fiscal year variant. So, there is a mismatch in the storage bucket profile where in the data already stored in Weekly, Monthly and Posting Period based on the earlier Fiscal year 2008 configuration.
Now the system is not allowing to do any Interactive Planning.
The business would like to use the latest fiscal calendar and also not ready to loose the forecasted data for the year 2008. So, we are not in a position to deactivate and reactivation of Planning Area and also we are not using back-up infocubes functionality.
Please update me if anybody experienced this type of situation or know the solution.

I think your suggestion should work but it takes more resource time and need more database size.
I am thinking to retain some important forecast keyfigures data in the following workaround method;
1) Now the Planning Area Initialized for 2yrs historical + 1Yr forecast horizon
2) Run first set of new macros to copy from year (say 2008) to year (say 2006)
3) Re-initialize the Planning Area (Jan'2006 to Dec'2007)
4) Re-build the New Fiscal Calendar from R/3
5) Re-initialize the Planning Area for history and forecast horizon (ex: from Jan'2006 to Jan'2009)
6) Run second set of new macros to copy back ( ex: from 2006 to Year 2008) and wipeout the duplicate records in 2006
7) The above macros can be utilized to run every year end when ever the new fiscal calendar introduced
Suggestions are welcome

Get error in AJRW - Fiscal Year change for Assets

Dear Expert!
I am facing with the following problem when run AJRW in Test Run mode.
Company Code: 1000
Fiscal year: 2010
Fiscal year change statistics - Test Version
Status    Company code    Read.....   Already changed.... To change.... Incorrect..... Without values..... Already deactivated....
(Those above column content is all blanked)
And in "Error log" button
Fiscal year change requested for the past (Message type error)
Problem class very important with log number 00000000000003117262
The current asset Fiscal year in OAAQ & OAAR is 2009, user already posted depreciation for 01/2011 & 02/2011. And they can't execute AJRW to close old fiscal year (FY 2010).
I am new in Asset Accounting Module. Any suggestions will be greatly appreciated with points.
Best regards.

Dear:
               Please try to run AJAB online in test mode and then in production run for 2010 and then run AJRW.
                Regards

We are facing an issue of Fiscal year varint for 2LIS_03_UM DS

Similar Messages

Maybe you are looking for