We need how to copy macro logic in the system

Hi Experts,
we need how to copy macro logic in the system, we have some macros in my friend system, i need how to copy macro logic , can u send me elaborate.
Regards,
BABU

I'm a bit uncomfortable with you've wanted to do especially you and your friend has a different system (unless its a sister company/industry). If this would be the case you can copy your friend's macro with the help of your basis team to transport them in one system to another.
if the case is different organization, I'm not sure if that is possible since no industry have same requirements but i may suggest the links below for your reference on how to copy the Macro into external system. Hope the document is relevant to your issue.
[http://help.sap.com/saphelp_scm41/helpdata/en/82/2101fac5288f4d8c7be7c20e604a8f/frameset.htm]
Cheers!

Similar Messages

How do you install logic on the new imac if there is no disk drive?

How do you install logic on the new imac if there is no disk drive?

Dj Generator wrote:
[There] must be other options, i would rather not spend £70 on a disk drive or £140 on the software again??
Hmmm? A quick google search for external optical readers turns up many in the $20-$40 (USD) range. Didn't convert to £ or include any VAT charges, but you should be able to get something significantly cheaper than £70. That's your simplest solution.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

Upgraded computers - how do I remind Logic where the SFX and Instrument files are?

I just upgraded computers - how do I remind Logic where the SFX and Instrument files are located? On my old computer it was set up on an external drive, on this computer it's all internal, but how and where do I create the paths?
Thank you!

thanks Finatarry. when navigating to the "please write your question here" page I went through a Fire fox or thunderbird choise but that does not seem to have been fowarded to you - from what I read above here on the thread. my appologies. an answer I have stumbled upon is at Preferences-Accounts -ServerOptions- does this folder browsed to via the button also keep mthe profiles there?- and thanks again

How to conf in Hyperion, so the system couldn't login with the same user

Hai.....
how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
rgds
uka fp

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

How to make every account in the system login automatically?

How to make every account in the system login automatically when Mac OS X startup?
Thanks!

I can see one way to do it. You'll need to install a script in each user account, and have it set as a login item for each user. Let's imagine you have three user accounts. Each user in Mac OS X has a UID number. Normally your first user has the UID of 501, the second one will be 502 and so on...
You can determine the UID by running the following AppleScript while logged in on each user:
do shell script ("ID")
This'll return a long block of text, but right at the start you'll see the UID number. Let's assume your three users have the UIDs 501, 502 and 503. We begin with 501.
Create the following script and save it as an application while logged in as 501. Note that the password you're entering is the password for UID 502. Also note that the forum system is creating line breaks where there shouldn't be any. The long "do shell script" line should be one line.
delay 5 --This delay allows time for login to complete, but it may not be necessary.
try
do shell script "/System/Library/CoreServices/Menu\\ Extras/User.menu/Contents/Resources/CGSession -switchToUserID 502"
delay 5 --This delay could be shorter or longer, depending on how fast your machine is.
tell application "System Events"
keystroke "password for 502" --the password for UID 502
keystroke return
delay 1
end tell
on error
display dialog "Unable to switch user."
end try
Open System Preferences, go to Accounts, click "login items" and drag your script (saved as an application) to the login items window.
You basically repeat this process for each user account, modifying the script so it switches to the next user.
This isn't ideal, because your passwords will be stored in the scripts, and each user could open the scripts and learn the passwords of the other users on that machine.
I picked some of this up from a discussion over at the Macworld forums:
http://hints.macworld.com/article.php?story=20031102031045417
Message was edited by: The Preacher
Message was edited by: The Preacher
Message was edited by: The Preacher

How to delete a company in the system?

Hi all,
i am create three companies in the same B1 system. Now i just want to know how to delete one company from the system?
thanks,
Suresh Yerra.

Hi Rajesh,
It's very simple.
1. login to SQL Server
2. In the databases u can find the three companies
3. delete the particular company database from the SQL databases.
Let me know if u have any queries regarding this?
Thanks,
Suresh Yerra.

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

Need to enter invoice and payment in the system after a manual check issued

Client Need to enter invoice and payment in the system after a manual check is issued for some urgent transactions.
Please suggest few ways to do this .

Hi,
If client can maintain a separate check book sequence for manual issue, we can configure a separate payment document with the same sequence and later record the invoice and generate payment ....
Regards,
Ivruksha

How Can One Run Only In The System Administrator ( ie root ) ?

Upon creating a System Administrator ( ie root ) in Command + R , of course after Clean Installing OS X ML with my own specific Apple Verified Account ,
i have the Log In screen from a startup , either Safe Boot or a Boot , and i have my own specifc Apple Verified Account , plus the Other... ,
which the Other... of course is the System Administrator ( ie root ) .
How Can One Run Only In The System Administrator ( ie root ) ?
Is there a way in Terminal with sudo su to make it work ?
Shall i just always log in with Other... System Administrator ( ie root ) , and just forget the my own specific Apple Verified Account ?

As of EHP3, you could still install some EHP components. On an ERP 6.00, you could just push SAP_APP to 6.03 and move on. Now if you want another component in your system with an EHP4 version, you can't have some components at EHP3 and some at EHP4. You would install EHP4 for the new component you desire updated and part of the work will be to also update SAP_APP to 6.04.
EHP4 is an UPGRADE process, with shadow instance & all the joy of an upgrade process. You can either run ressource minimized or downtime minimized. In resource minimized, the shadow instance runs on the same server as the main instance. Downtime minimized allow to run the shadow instance on a separate / new server. Anyway you go, you will always have a "Downtime Phase" when you bring back the updated components from the shadow instance toward the real production one.
As with any UPGRADE project, the benefits of installing EHP4 for your business has to weighted against the downtime cost.
Our tests so far on small systems (few data, few users, 120GB database) show ~3 days process from EHP3 to EHP4 (all components) with a downtime phase of about 22 hours using the "resource minimized" path, i.e. shadow & main instance on the same server (4 CPUs, 16GB RAM). Until you give a try at your Sandbox or DEV systems, you won't have realistic figures for your environment.
Good luck!

How many people can be on the system with a 512 K connection in BPC 7 MS

Hi,
It appears that BPC uses a large piece of the band width and more than one computer and user with a 512 K connection using BPC will not work.How many people can be on the system with a 512 K connection? -BPC 7 ms version.
Thx
PLN

I would like to precise more things regarding the network.
I did a case study for one customer and really to have good performances with SAP BPC client the network required the follow:
Bandwitdth 1024kb/s
Latency smaller than 200 ms between BPC client and BPC server
Otherwise the users will experience problems:
1. IBandwitdh < 1024Kb/s then to download 80 MB or more (templates + dimensions) will require a lot of time and that's means the login time will be very slow every time when a dimension is changed or security is process
2. When an report is executed (a medium report not very complex report) around 100 mesage are send between bpc client and server. So if latency > 200 ms than a simple calculation is saying just into network it will be lost 200 * 100 ms = 20 s.
So for a report which normally is taking 5 - 10 second it will take 30s or even more into client with latency bigger than 200 ms.
Regards
Sorin Radulescu

TS4009 how do you retrieve information after the system has been reset to default

how do you retrieve information after the system has been reset to default?

From a backup on itunes or icloud, assuming you have made backups. Connect to itunes and in the first tab for your device, choose to perform a restore.

I have Logic on my iMac and want to install it on my new mac book but my mac book doesn't have a dvd drive. I tried to download the upgrade but it looks for an older version. How do I get Logic on the Mac book ?

I would like to install logic on my new mac book but there is no dvd drive. I tried to downlaod the upgrade but that didn't work. How do I download it for the first time?
Thanks!

You can only use the App Store version to reinstall on your new Mac if you bought Logic via the App Store in the first place.... and then it will appear under the Purchases tab in the Mac App Store App so long as you are signed in using the same Apple ID you used to purchase Logic via the App store in the first place.
If you bought the DVD edition of Logic Studio then you must initially install using those original DVDs to begin with and then update to the latest version of your version of Logic via software updates.
No DVD drive? Buy an external one.. Amazon do a very cheap basic one that works well..
or...
Use Remote Disk if you still have your older Mac which has a built in DVD drive...
http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US

I had my iPhone 4S stolen last week and I am going to sync it to my computer to get everything back on it. I have a new computer, i know how to copy music over to the new computer, but where are the contacts stored on the computer?

Hi there,
Can anyone help me!? I know how to copy my music library to my new computer but struggling with copying the contacts etc. Where do I find the contacts folder on my old computer?
Thanks
K

I had my iPhone 4S stolen last week and I am going to sync it to my computer to get everything back on it.
If it is stolen , how are you going to sync it?
You mean you got a new iPhone and you want to sync it to your computer?
Plug it in.
I know how to copy my music library to my new computer
New computer??? Or new iPhone?
I know how to copy my music library to my new computer but struggling with copying the contacts etc. Where do I find the contacts folder on my old computer?
I suggest you simply copy your entire User folder from old computer to new computer. This way all your data (Music, photos, contacts, emails, calendars, documents, etc.) goes across.

How to copy a table from one system to another system

Hi all,
can any one say how to copy table from one system(sys1) to another system(sys2).
regards,
nagaraj

There are many ways.
1. Use the already existing transaport request number for that table to do the transaport (Active)
2. Create mannual transport request from SE01 and in the object list enter following
R3TR -- TABI -- <Table Name>
And do the transaport.
3. Ask your basis consultant to do the transaport from oracle layer.
Thanks,

We need how to copy macro logic in the system

Similar Messages

Maybe you are looking for