Web access only accessible when specifying template

Hi,
we moved our Groupwise 8.0.2 system to a new server after a server crash ( both old and new server are oes2 sp3 )
It works all fine, except that we cannot access the webaccess anymore on
http://servername/gw/webacc
but only on
http://servername//gw/webacc?User.interface=css
that however works very well.
Any idea how we can get it back to work with the old original URL?
Thanks a lot.
b.

Originally Posted by Bob-O-Rama
Not seen that one.... here are some guesses.
How did you get the WebAccess agent back into service? A restore? Or did you re-install it?
/var/opt/novell/groupwise/webaccess/webacc.cfg is the config file where the template location is specified. For us, for example, they live here /srv/tomcat6/webapps/gw/WEB-INF/classes/templates/webacc I'd expect the default is specified come place.
ALSO.... make sure its not a browser issue... the last chosen template is cached on the browser. Try using private browser mode and then access the base URL and see if it works - if so, clear cookies on the browser.
-- Bob
Hi,
thanks for your reply.
Have checked the browser issue already, it is not that. It is actually accross the organisation, no matter which browser is used.
The other thing you mention seems to be the right direction, because the error message we get when using the "normal" URL is:
Compile Error: login.htt: Line 1: Unable to open file: login.htt. Cannot load file: login.htt.
however, I checked and the file seems to be in all the necessary locations. Maybe I am overlooking one.
b.

Similar Messages

  • Web server only accessible via intranet lan.. help!

    This is really making me nuts, and my brain is dry at the moment. I have reinstalled my Leopard Server twice, and I don't manage to solve this. It was working before upgrading to Leopard, so I don't know what the catch is.
    I set up a couple of websites via SA, as always. And I can only access them from our internal network (192.168.1.100, the server's IP) and from our fixed IP address (80.39.112.16) only when we are in the same lan. If you open 80.39.112.16 or the domain name www.i-publishingservices.com, DNS hosted at Network Solutions, it does not open.
    It is not a firewall issue (I have all web ports open and it does not work with the firewall deactivated either) and I don't think it is a router thing, as it was working before. The router has NAT translation on, and serving all ports to 192.168.1.100, the server's internal IP.
    Any ideas? Maybe it has to do with our internal DNS? We've never used the DNS service...Maybe there should be a www user in the Workgroup Manager? I am really lost. Any help will be greatly appreciated.
    Chema.

    If appears there is a Leopard Server firewall here, and a second and outboard and NAT-capable firewall here, but only the configuration of the latter is mentioned. Anything interesting in the Leopard Server firewall logs?
    If this is dual-NIC box (eg: an up-rated Mac Pro box or an Xserve), this could easily be a local IP configuration issue on the box.
    As for some additional tests, here are the classics:
    dig -x ipaddr - from inside and outside your network.
    traceroute ipaddr - from inside and outside your network.
    Another test is to set up a real (test) web server at the external static address, and see if that works; start eliminating pieces from the puzzle. This would eliminate the NAT layer, for instance.
    The domain does resolve to the specified IP address from out here, both the example.com domain and the www.example.com host resolve to the specified address. So this does look local; router, firewall, NAT, etc.
    I've learned to trust all "it was working before" statements after applying appropriate verification, and to occasionally use a second set of eyeballs to make sure I've entered the IP addresses correctly.

  • Pkcs11 certificate only accessible when open certmanager

    I've added a pkcs11 library. And try to access a https site with client authentication.
    If I open firefox and directly open the https site I have to enter the pin for my smartcard. But I cannot choose a certificate and the authentication fails.
    If I open firefox and first go to "view certificates" in the settings section. I can see my personal certificate after entering the pin for my smartcard. If I then open the https site I can choose my certificate and the authentication works.

    Thanks for your answer.
    I don't think it is a configuration problem.
    Again if i click on view certificates I see my certificate and can do a two way ssl authentication as desired. so everythink works.
    But if i don't click on view certificate on firefox startup I am not able to select my certificyate. firefox just ask for the pin and then fails with (Error code: ssl_error_handshake_failure_alert)
    It's as if firefox does not update its internal certificate store. (or it just updates it when clicking on view certificate).
    There is another bug too, but I was able to solve that. There is a problem in the nss library when trying to authenticate with tls1.2. with tls 1.2 firefox tells me that the key is invalid. by analysing that problem I found out, that nss sets keytype to nullkey. so I corrected that by just modifying lib/ssl3con.c (nss)
    if (isTLS12) {
    //rv = ssl3_TLSSignatureAlgorithmForKeyType(keyType,
    rv = ssl3_TLSSignatureAlgorithmForKeyType(rsaKey,
    &sigAndHash.sigAlg);
    so I set the type to rsaKey directy. With that change I can authenticat and everything works. exept that I have to click on view certificate after firefox starts up. Maybe there is another but in nss somewhere.

  • Why do web pages only load when I move my mouse around the browser?

    As soon as I try to load a site the browser does not load anything at all until I start moving my mouse around. I tried updating flash and using different settings and preferences but to no avail.

    Ok, Just found firefox on dads laptop to be doing this as well, and it seemed to be the system time/date wrong.
    This caused the addon update checking thing to find that all ssl certificates were expired (the year was set to 1970) I'm not sure how that affected anything, but after setting the time/date correctly everything started working fine again.
    Hope this helps someone else

  • Bold 9700 .co email for Outlook Web Access

    Hello, have a new domain xxxx.co and when I attempt to configure the email account for exchange outlook web access, only .com .edu .net and .org are the only available. How can I add .co to the list?
    Thank you in advance. Steve

    Hello Steve,
    Welcome to the BlackBerry Support Community Forums
    Try using the second advanced integration process as listed here:
    http://www.blackberry.com/btsc/KB10154
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • After updating to ios 7, I am now asked to enter my password continuously when using outlook web access for my work emails. This didn't happen before, I only had to enter my password once. How can I fix this?

    After updating to ios 7, I am now asked to enter my password continuously when accessing my emails on outlook web access. Before I just had to log in and I was able to reply, save emails, etc without re entering my password. How do I fix this?

    Similar thing is happening to a relative.
    He upgraded his iPhone 5 and lost his iCloud account and all his email accounts. Major pain in the neck for a senior. And it was not a user error...unless you count the fact that he hit the upgrade button.

  • Is it possible to restrict access to individual SharePoint Online sites (or site collections) to users only connecting when on the corporate network?

    Hi,
    We have an Office 365 environment which is linked to our on premise ADFS environment. We have started to make some deployments of sites to our SharePoint Online environment. For the majority of sites this is great and the ability to access the sites
    from anywhere is a real bonus. However, there are some sites and data that I would be much more comfortable in migrating to SharePoint Online if there were a way to make them only accessible via users/computers connected to the corporate network. 
    I have seen articles in how you can configure ADFS to allow all connections to the Office 365 tenant only from the network or not but what I am after is something which can be configured on a site by site basis (i.e. not the whole Office 365 environment
    or SharePoint Online environment) to only allow access when connecting from the corporate network.
    Any advice/help would be much appreciated?
    Many thanks
    Paul

    Hi,
    This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to SharePoint online, I recommend you post your question to the Microsoft Office 365 Community Sites and document sharing Forum
    http://community.office365.com/en-us/f/154.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Thanks
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • Unable to type from keyboard consistently in FF when certain sites are open (Lotus Domino Web Access)

    When I use FireFox to Open Lotus Domino Web Access after a few minute the browser will not allow me type consistently. This happened before around version 13 or 14 but went away. The mouse works perfectly except when clicking on window to open new tab.
    I have uninstalled, reinstalled current version 16.0.2
    I have uninstalled, reinstalled earlier version 14
    I have started in Safe Mode
    I have disabled all add-ins except for "Remote XUL Manager" which is necessary for Lotus Domino Web Access.
    I force closed using Task Manger and restart and it will work for a few minutes then start the same issue. I can not type "letter by letter" , if I hold a "letter" key down it will repeat the letter albeit at a slower pace.
    Unfortunately I installed Windows 8 which has IE10 (which cannot access Web Mail at all) so I have resorted to typing in a word document and pasting into emails within Lotus just to function.
    The site is not accessible for outside testing as it occurs post log in to site.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • Error message when login to Remote Web Access

    Hi everyone,
    I have a server that is running Windows Server 2012 Essential. All was working fine until one day I tried to login to Remote Web Access. As soon as I type in my user name and password and press enter I am greeted with the following error message:
    "Critical Error - Remote Web Access" (this is displayed in the browser's web page bar)
    "Cannot connect to Remote Web Access. Please contact the person who manages the server."
    I don't know how to fix this problem. I only get this error page when entering the correct login.
    I will be very grateful if anyone knows hot to get around this.
    Thanks!

    Hi John:
    Before we get too worried, try "other user" then domain-name\user-name and pw.
    Try that and let us know.
    Also, and becuse you should do it anyway, run the BPA and fix everthing it finds, look through the event viewer for error messages, and run the BPA from right side under the devices tab.
    Larry Struckmeyer[SBS-MVP]

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    Screenshot of how it looks when i try to show a ms access form inside a iframe:
    http://oi58.tinypic.com/2vj4ish.jpg

  • How do I keep the name tags in Picasa Web Albums from appearing on the images by default? With Explorer, name tags only appear when mousing over the image, but with Firefox, all the tags appear on the picture as soon as it is loaded, which looks messy.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

  • Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?

    Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?
    == This happened ==
    Every time Firefox opened
    == I've never been able to figure out how to do those things in Firefox.

    When you use OWA in something other than IE, you're using OWA lite and no--it is not possible to do either in OWA lite (well, new Exchange stuff makes my answer a little less emphatic but still: pretty much no). Thanks Microsoft. But this guy made it possible to mark unread/read and select all/none:
    http://david-burger.blogspot.com/2008/07/firefox-greasemonkey-outlook-web-access_19.html

  • Tracks out of order when playing album through Remote Web Access

    When you choose an album (CD if you want) in Remote Web Access and play it, the tracks don't play in the original order.  You can drag and drop to reorder them, but you have to know the right order.  Is there a way to fix this or is this just a
    failing of the Remote Web Access software?  Thanks in advance.

    I'm having the same issue. Ever find a solution for this?

  • Firefox crashes when replying to Outlook Web Access 97

    When trying to reply to a message in Outlook Web Access 97 , it crashes and will not restart. At times it works, but other times it doesn't and I have to go to Safari to use Outlook.
    Any ideas?
    Thanks,
    Jeff

    Please give me the crash report ID. Press '''CTRL+ L''' to Go to the address bar then type '''about:crashes'''.
    Copy and paste the entire page here and I will be able to figure out your problem

Maybe you are looking for