Web AS 6.40 J2EE services instllation.

Hi All,
I have installed NW SR1 ABAP + Java with XI.
Is it possible to install J2EE services at the OS level so that Java instance can be administered from the OS level. Just like in the case when we install standalone Web AS 6.40 Java instance, we can see the three services to start/restart the java instance, is it possible to start/restart the individual service at the OS level somehow or is it mandatory to start/restart the J2EE from SMICM transaction or with JCMON tool.
regards,
Saurabh Khanna.
Message was edited by: Angad Nagpal

Hi Saurabh,
if you run a full WebAS , it needs to be in sync and therefore you cannot start and stop the Java instance "from OS" (which you , by the way, never can do).
Regards,
Benny

Similar Messages

  • Switching off unused J2EE services

    Hi there!
    I have a question regarding J2EE services. We all know SAP J2EE WAS is a very rich implementation but... Suppose you don't need a bunch of those services, and you would like to maximize your box performance. Beside "common" way of tuning, could switching off unused services be an option? (e.g. I don't use web dynpro, so why keepin' it up?)
    Technically speaking, how difficult is it in your opinion? Specifally in finding services' dependencies?
    Politically speaking, and contract and license wise, is it feasible? Will SAP still support me on services that are still swtiched on? (Given that they don't malfunction because of one the service I have switched off, of course...)
    I am referring to a NW CE instance, particularly.
    Thanks for sharing your opinion.
    Cheers,
    Alex

    Hi Alex,
    For 7.0, there is the note https://service.sap.com/sap/support/notes/871394 - but it seems there is no note for 7.1.
    Even the 7.0-note is old and has entries not existing any more and does not cover all services existing meanwhile; some entries are also not helpful and leading into the wrong direction, so one should read the Excel-File very carefully and should know what one is doing if turning off services...
    The bad news is that (solely) turning off the (superfluous) services, at least if you have a portal running (on 7.0), this does not decrease the startup time very much. I'm just digging deeper for more ways to optimize this, and also hoped shutting down the services would help efficiently, but... :-|
    Best regards
    Detlev

  • J2EE service implementation

    Hi,
    having the portal service implementation from earier times in mind and
    look for a way to write a backgroung job, which will be started when the webas instance is started.
    Therefore each portal service implements the start() method.
    Does the webas provide possibilities to write J2EE services?
    Thanks,
    Jens

    for CE solved by using jobs...
    http://help.sap.com/saphelp_nwce10/helpdata/en/44/2da75e13363f0ae10000000a114a6b/frameset.htm

  • Web as ABAP and J2EE Documentation

    Hi!
    Guys, I dont find documentation for installation web as ABAP and J2EE with Remote Database (ORACLE 10G)
    My OS is based Windows 64 bit x86.
    Somebody Help-me ??
    regards.
    HMattos.

    Hi,
    All installation info should be in service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000659894&
    Eddy

  • SharePoint - Web Part - SQL Server Reporting Services Report Viewer Error.

    Hi,
    I was just having a bit of a fiddle with the differen't web-parts available to add on our local SharePoint site, and as one of my tasks is to have a report automatically open when the page is opened i thought i would try to add the web-part 'SQL Server Reporting
    Services Report Viewer' just to see the outcome.
    Now, I don't much care about viewing the report at this time, but imediately after trying to add the web part i am being displayed with an error and no matter how much i navigate away from the page or close the browser the particular link to the page i was
    trying to insert the web-part into now displays an error.
    The error simply says 'An unexpsected error has occured' with various 'Correlation ID:' each time.
    Now i have a link to other parts or subsites of that SharePoint site and they work just fine, it's just when i try to click on the page where i wanted to put the web-part in it
    still comes up with an error. This page just so happens to be the home page so it really does need to be fixed.
    Please help!?
    Many Thanks,
    Plain_Clueless

    Hi again,
    Sorry for the bother, We have now fixed the issue for the time being.. all that was needed was a simple '?contents=1' at the end of the url which takes you to a menu where you can delete the
    necessary web-part that was causing the trouble.
    As for actually implementing the report onto SharePoint.. in future i will make Dev pages instead.. and it seems i may need to contact the admin side of building so they configure 'SQL Reporting 
    Services Report Viewer' properly.
    Thanks a lot though!
    - A little less Plain_Clueless
    Plain_Clueless

  • J2ee service does not start

    we are running WAS 6.20 on windows platform. I have problem bringing up the j2ee service.
    The parameter for automatic startup is already set and the path to the  go.bat is also correct.
    I tried execting the go.bat and encountered below error.
    C:\usr\sap\CFP\D00\j2ee\cluster\dispatcher>go.bat
    SAP J2EE Engine Version 6.20 SP1 is starting...
    Loading: LogManager ...
    Loading: R3StartupManager ...
    [R3StartupManager]: ID000701: Couldn't start r3startup manager. Exception is : Cannot assign
    equested address: connect
    Loading: R3StartupManager returned false!
    Kernel not loaded. System halted.
    any suggestions are most welcome
    Srinivas

    Hi Srinivas,
       check out SAP customer note 604080 at http://service.sap.com/notes
    Hope this helps
    John

  • Error when Creating Web Dynpro Model in CAF-Service

    Hi All,
    I reaaly need help. AFter updating to SPS 9, it was necessary to redeploy my Entity Service. That contains to "Create a Web Dynpro Model" in the Service Explorer,
    to get an interface of the Service in my Web Dynpro Application.
    Before I update to SPS 9, the Application works fine.
    But now, when I want to "Create a Web Dynpro Model" in the NWDS I get the following Error-Message (its not a useful Error-Message):
    <i>Error cannot create Web Dynpro Model:
    Creation of  Web Dynpro model failed. Reason: null </i>
    Thanks for helping me
    Steve

    Hi Aliaksei,
    the problem in the thread is the same I got.
    When I use only 7 letters for the operation name, the creation work. When I use more then 7 letters the creation doesnt work.
    But its hard to find a methodname with only 7 letters.
    In SPS 8 I didnt have problems with the length of method names. Why is it so?
    The workspace log:
    !ENTRY com.tssap.util 4 0 Okt 10, 2006 15:12:45.577
    !MESSAGE Oct 10, 2006 3:12:45 PM         com.sap.ip.mmr.foundation.AssociationsOfObject        [Thread[main,5,main]] Error: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 35, 3c, 3f(:main:, row:1, col:3)(:main:, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 35, 3c, 3f(:main:, row:1, col:3)
    !ENTRY com.tssap.util 4 0 Okt 10, 2006 15:12:45.592
    !MESSAGE Oct 10, 2006 3:12:45 PM         com.sap.ip.mmr.foundation.AssociationsOfObject        [Thread[main,5,main]] Error: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 35, 3c, 3f(:main:, row:1, col:3)(:main:, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 35, 3c, 3f(:main:, row:1, col:3)
    !ENTRY com.tssap.util 4 0 Okt 10, 2006 15:12:48.705
    !MESSAGE Oct 10, 2006 3:12:48 PM  com.sap.ide.metamodel.core.service.FileSystemService.comp... [Thread[main,5,main]] Error: absolute path too long (253) for MDO:
    !ENTRY com.tssap.util 4 0 Okt 10, 2006 15:12:48.705
    !MESSAGE Oct 10, 2006 3:12:48 PM  com.sap.ide.metamodel.core.service.FileSystemService.comp... [Thread[main,5,main]] Error: absolute path too long (253) for MDO:
    !ENTRY com.tssap.util 4 0 Okt 10, 2006 15:12:48.705
    !MESSAGE Oct 10, 2006 3:12:48 PM  com.sap.ide.metamodel.webdynpro.implementation.ModelProxy... [Thread[main,5,main]] Error: could not get a valid path for ModelClass "cas.conti.com.sap.cd.database.services.cd_database.changedescriptiontableservice.QChangeDescriptionTableServiceFindByTitle" (path too long?)
    !ENTRY com.tssap.util 4 0 Okt 10, 2006 15:12:48.705
    !MESSAGE Oct 10, 2006 3:12:48 PM  com.sap.ide.metamodel.webdynpro.implementation.ModelProxy... [Thread[main,5,main]] Error: could not get a valid path for ModelClass "cas.conti.com.sap.cd.database.services.cd_database.changedescriptiontableservice.QChangeDescriptionTableServiceFindByTitle" (path too long?)
    Thanks
    Steve

  • I need information about Web dynpro ABAP Exception : ICF Service Node

    I need information about Web dynpro ABAP Exception :
    ICF Service Node "/sap/bc/webdynpro/sap/abcd/undefined" does not exist.
    Here abcd is application name.
    ICF Service Node exists and activated but kindly let me know from where "undefined" is coming .
    Please let me know your comments /views about  this.

    Hi,
    I think ur webdynpro service is not active after upgradation.
    You have manually activate it.
    Go go Tcode SICF,Execute the Initial screen,
    and in this new screen give service  as your application name and click on filter.
    You will get your service below which will be ur application name .
    right-Click on the deactivate and activate it or just activate it,.
    This shd work

  • J2EE Service in Solution manager can not be started

    Dear Guru,
    I have a problem with my Solution manager J2EE Service. The J2EE can not be started. It's returned code is "-11113". My Solution Manager Server Specification is:
    - SAP Solution Manager 4.0
    - Software component:
    SAP_BASIS       700                     0013
    SAP_ABA              700                     0013
    PI_BASIS              2006_1_700     0003
    ST-PI              2005_1_700     0005
    SAP_BW              700                     0015
    SAP_AP              700                     0009
    BBPCRM              500                     0009
    CPRXRPM              400                     0009
    BI_CONT              703                     0007
    ST              400                     0013
    ST-A/PI              01K_CRM560     0000
    ST-ICO              150_700     0009
    ST-SER              700_2007_1     0004
    - OS: Ms Windows 2003 32 Bit
    - Database: ORACLE 10.2.0.2.0
    - RAM = 1 GByte
    The following is the error message when J2EE service is fail to run:
    Developer Trace:
    trc file: "D:\usr\sap\SMA\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID3244050
    pid         : 7532
    system name : SMA
    system nr.  : 00
    started at  : Mon Feb 25 16:13:39 2008
    arguments       :
           arg[00] : D:\usr\sap\SMA\DVEBMGS00\exe\jlaunch.exe
           arg[01] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[02] : -DSAPINFO=SMA_00_server
           arg[03] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=1130
           arg[06] : -DSAPSYSTEM=00
           arg[07] : -DSAPSYSTEMNAME=SMA
           arg[08] : -DSAPMYNAME=BKKT031A_SMA_00
           arg[09] : -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2320] Mon Feb 25 16:13:39 2008
    [Thr 2320] *** WARNING => INFO: Unknown property [instance.box.number=SMADVEBMGS00bkkt031a] [jstartxx.c   841]
    [Thr 2320] *** WARNING => INFO: Unknown property [instance.en.host=BKKT031A] [jstartxx.c   841]
    [Thr 2320] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 2320] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> OS libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> os libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID3244000  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID3244050  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID3244000            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID3244050            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    [Thr 2320] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 2320] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 1544] JLaunchRequestFunc: Thread 1544 started as listener thread for np messages.
    [Thr 8088] WaitSyncSemThread: Thread 8088 started as semaphore monitor thread.
    [Thr 2320] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 2320] CPIC (version=700.2006.09.13)
    [Thr 2320] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_14
    [Thr 2320] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID3244050]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_14
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=192M -XX:PermSize=192M -XX:NewSize=86M -XX:MaxNewSize=86M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_14-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> init heap size     : 512M
    -> root path          : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120000
    [Thr 2320] JLaunchISetDebugMode: set debug mode [no]
    [Thr 5408] JLaunchIStartFunc: Thread 5408 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=192M
    -> arg[ 10]: -XX:PermSize=192M
    -> arg[ 11]: -XX:NewSize=86M
    -> arg[ 12]: -XX:MaxNewSize=86M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dstartup.mode=SAFE
    -> arg[ 25]: -Dstartup.action=UPGRADE
    -> arg[ 26]: -Dsys.global.dir=D:\usr\sap\SMA\SYS\global
    -> arg[ 27]: -Dapplication.home=D:\usr\sap\SMA\DVEBMGS00\exe
    -> arg[ 28]: -Djava.class.path=D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 29]: -Djava.library.path=C:\j2sdk1.4.2_14\jre\bin\server;C:\j2sdk1.4.2_14\jre\bin;C:\j2sdk1.4.2_14\bin;D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs;C:\oracle\SMA\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\OpenSSH\bin;C:\Program Files\System Center Operations Manager 2007\;D:\usr\sap\SMA\SYS\exe\uc\NTI386
    -> arg[ 30]: -Dmemory.manager=512M
    -> arg[ 31]: -Xmx512M
    -> arg[ 32]: -Xms512M
    -> arg[ 33]: -DLoadBalanceRestricted=no
    -> arg[ 34]: -Djstartup.mode=JCONTROL
    -> arg[ 35]: -Djstartup.ownProcessId=7532
    -> arg[ 36]: -Djstartup.ownHardwareId=Y0571960686
    -> arg[ 37]: -Djstartup.whoami=server
    -> arg[ 38]: -Djstartup.debuggable=no
    -> arg[ 39]: -DSAPINFO=SMA_00_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=1130
    -> arg[ 42]: -DSAPSYSTEM=00
    -> arg[ 43]: -DSAPSYSTEMNAME=SMA
    -> arg[ 44]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 45]: -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=00
    -> arg[ 50]: -DSAPSYSTEMNAME=SMA
    -> arg[ 51]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 52]: -DSAPDBHOST=BKKT031A
    -> arg[ 53]: -Dj2ee.dbhost=BKKT031A
    Mon Feb 25 16:13:40 2008
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 5408] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 7188] Mon Feb 25 16:13:58 2008
    [Thr 7188] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 7188] Mon Feb 25 16:14:02 2008
    [Thr 7188] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 7188] JLaunchISetClusterId: set cluster id 3244050
    [Thr 7188] Mon Feb 25 16:14:03 2008
    [Thr 7188] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 7188] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 5436] Mon Feb 25 16:16:34 2008
    [Thr 5436] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 5436] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    [Thr 5436] Mon Feb 25 16:16:35 2008
    [Thr 5436] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "D:\usr\sap\SMA\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID3244050
    pid         : 14568
    system name : SMA
    system nr.  : 00
    started at  : Mon Feb 25 16:16:46 2008
    arguments       :
           arg[00] : D:\usr\sap\SMA\DVEBMGS00\exe\jlaunch.exe
           arg[01] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[02] : -DSAPINFO=SMA_00_server
           arg[03] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=1130
           arg[06] : -DSAPSYSTEM=00
           arg[07] : -DSAPSYSTEMNAME=SMA
           arg[08] : -DSAPMYNAME=BKKT031A_SMA_00
           arg[09] : -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 14572] Mon Feb 25 16:16:46 2008
    [Thr 14572] *** WARNING => INFO: Unknown property [instance.box.number=SMADVEBMGS00bkkt031a] [jstartxx.c   841]
    [Thr 14572] *** WARNING => INFO: Unknown property [instance.en.host=BKKT031A] [jstartxx.c   841]
    [Thr 14572] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 14572] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> OS libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> os libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID3244000  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID3244050  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID3244000            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID3244050            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    [Thr 14572] Mon Feb 25 16:16:47 2008
    [Thr 14572] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 14572] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 14664] JLaunchRequestFunc: Thread 14664 started as listener thread for np messages.
    [Thr 14668] WaitSyncSemThread: Thread 14668 started as semaphore monitor thread.
    [Thr 14572] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 14572] CPIC (version=700.2006.09.13)
    [Thr 14572] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_14
    [Thr 14572] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID3244050]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_14
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=192M -XX:PermSize=192M -XX:NewSize=86M -XX:MaxNewSize=86M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_14-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> init heap size     : 512M
    -> root path          : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120000
    [Thr 14572] JLaunchISetDebugMode: set debug mode [no]
    [Thr 14716] JLaunchIStartFunc: Thread 14716 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=192M
    -> arg[ 10]: -XX:PermSize=192M
    -> arg[ 11]: -XX:NewSize=86M
    -> arg[ 12]: -XX:MaxNewSize=86M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dstartup.mode=SAFE
    -> arg[ 25]: -Dstartup.action=UPGRADE
    -> arg[ 26]: -Dsys.global.dir=D:\usr\sap\SMA\SYS\global
    -> arg[ 27]: -Dapplication.home=D:\usr\sap\SMA\DVEBMGS00\exe
    -> arg[ 28]: -Djava.class.path=D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 29]: -Djava.library.path=C:\j2sdk1.4.2_14\jre\bin\server;C:\j2sdk1.4.2_14\jre\bin;C:\j2sdk1.4.2_14\bin;D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs;C:\oracle\SMA\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\OpenSSH\bin;C:\Program Files\System Center Operations Manager 2007\;D:\usr\sap\SMA\SYS\exe\uc\NTI386
    -> arg[ 30]: -Dmemory.manager=512M
    -> arg[ 31]: -Xmx512M
    -> arg[ 32]: -Xms512M
    -> arg[ 33]: -DLoadBalanceRestricted=no
    -> arg[ 34]: -Djstartup.mode=JCONTROL
    -> arg[ 35]: -Djstartup.ownProcessId=14568
    -> arg[ 36]: -Djstartup.ownHardwareId=Y0571960686
    -> arg[ 37]: -Djstartup.whoami=server
    -> arg[ 38]: -Djstartup.debuggable=no
    -> arg[ 39]: -DSAPINFO=SMA_00_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=1130
    -> arg[ 42]: -DSAPSYSTEM=00
    -> arg[ 43]: -DSAPSYSTEMNAME=SMA
    -> arg[ 44]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 45]: -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=00
    -> arg[ 50]: -DSAPSYSTEMNAME=SMA
    -> arg[ 51]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 52]: -DSAPDBHOST=BKKT031A
    -> arg[ 53]: -Dj2ee.dbhost=BKKT031A
    Mon Feb 25 16:16:48 2008
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 14716] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 6068] Mon Feb 25 16:16:58 2008
    [Thr 6068] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 6068] Mon Feb 25 16:17:01 2008
    [Thr 6068] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 6068] JLaunchISetClusterId: set cluster id 3244050
    [Thr 6068] Mon Feb 25 16:17:02 2008
    [Thr 6068] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 6068] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 14728] Mon Feb 25 16:18:33 2008
    [Thr 14728] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 14728] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    [Thr 14728] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "D:\usr\sap\SMA\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID3244050
    pid         : 13172
    system name : SMA
    system nr.  : 00
    started at  : Mon Feb 25 16:18:41 2008
    arguments       :
           arg[00] : D:\usr\sap\SMA\DVEBMGS00\exe\jlaunch.exe
           arg[01] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[02] : -DSAPINFO=SMA_00_server
           arg[03] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=1130
           arg[06] : -DSAPSYSTEM=00
           arg[07] : -DSAPSYSTEMNAME=SMA
           arg[08] : -DSAPMYNAME=BKKT031A_SMA_00
           arg[09] : -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 16204] Mon Feb 25 16:18:41 2008
    [Thr 16204] *** WARNING => INFO: Unknown property [instance.box.number=SMADVEBMGS00bkkt031a] [jstartxx.c   841]
    [Thr 16204] *** WARNING => INFO: Unknown property [instance.en.host=BKKT031A] [jstartxx.c   841]
    [Thr 16204] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 16204] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> OS libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> os libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID3244000  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID3244050  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID3244000            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID3244050            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    [Thr 16204] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 16204] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 15796] JLaunchRequestFunc: Thread 15796 started as listener thread for np messages.
    [Thr 14860] WaitSyncSemThread: Thread 14860 started as semaphore monitor thread.
    [Thr 16204] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 16204] CPIC (version=700.2006.09.13)
    [Thr 16204] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_14
    [Thr 16204] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID3244050]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_14
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=192M -XX:PermSize=192M -XX:NewSize=86M -XX:MaxNewSize=86M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_14-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> init heap size     : 512M
    -> root path          : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120000
    [Thr 16204] JLaunchISetDebugMode: set debug mode [no]
    [Thr 16180] JLaunchIStartFunc: Thread 16180 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=192M
    -> arg[ 10]: -XX:PermSize=192M
    -> arg[ 11]: -XX:NewSize=86M
    -> arg[ 12]: -XX:MaxNewSize=86M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dstartup.mode=SAFE
    -> arg[ 25]: -Dstartup.action=UPGRADE
    -> arg[ 26]: -Dsys.global.dir=D:\usr\sap\SMA\SYS\global
    -> arg[ 27]: -Dapplication.home=D:\usr\sap\SMA\DVEBMGS00\exe
    -> arg[ 28]: -Djava.class.path=D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 29]: -Djava.library.path=C:\j2sdk1.4.2_14\jre\bin\server;C:\j2sdk1.4.2_14\jre\bin;C:\j2sdk1.4.2_14\bin;D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs;C:\oracle\SMA\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\OpenSSH\bin;C:\Program Files\System Center Operations Manager 2007\;D:\usr\sap\SMA\SYS\exe\uc\NTI386
    -> arg[ 30]: -Dmemory.manager=512M
    -> arg[ 31]: -Xmx512M
    -> arg[ 32]: -Xms512M
    -> arg[ 33]: -DLoadBalanceRestricted=no
    -> arg[ 34]: -Djstartup.mode=JCONTROL
    -> arg[ 35]: -Djstartup.ownProcessId=13172
    -> arg[ 36]: -Djstartup.ownHardwareId=Y0571960686
    -> arg[ 37]: -Djstartup.whoami=server
    -> arg[ 38]: -Djstartup.debuggable=no
    -> arg[ 39]: -DSAPINFO=SMA_00_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=1130
    -> arg[ 42]: -DSAPSYSTEM=00
    -> arg[ 43]: -DSAPSYSTEMNAME=SMA
    -> arg[ 44]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 45]: -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=00
    -> arg[ 50]: -DSAPSYSTEMNAME=SMA
    -> arg[ 51]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 52]: -DSAPDBHOST=BKKT031A
    -> arg[ 53]: -Dj2ee.dbhost=BKKT031A
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 16180] Mon Feb 25 16:18:42 2008
    [Thr 16180] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 15648] Mon Feb 25 16:18:48 2008
    [Thr 15648] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 15648] Mon Feb 25 16:18:50 2008
    [Thr 15648] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 15648] JLaunchISetClusterId: set cluster id 3244050
    [Thr 15648] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 15648] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 14068] Mon Feb 25 16:19:57 2008
    [Thr 14068] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 14068] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    [Thr 14068] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "D:\usr\sap\SMA\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID3244050
    pid         : 15808
    system name : SMA
    system nr.  : 00
    started at  : Mon Feb 25 16:20:03 2008
    arguments       :
           arg[00] : D:\usr\sap\SMA\DVEBMGS00\exe\jlaunch.exe
           arg[01] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[02] : -DSAPINFO=SMA_00_server
           arg[03] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=1130
           arg[06] : -DSAPSYSTEM=00
           arg[07] : -DSAPSYSTEMNAME=SMA
           arg[08] : -DSAPMYNAME=BKKT031A_SMA_00
           arg[09] : -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 15880] Mon Feb 25 16:20:03 2008
    [Thr 15880] *** WARNING => INFO: Unknown property [instance.box.number=SMADVEBMGS00bkkt031a] [jstartxx.c   841]
    [Thr 15880] *** WARNING => INFO: Unknown property [instance.en.host=BKKT031A] [jstartxx.c   841]
    [Thr 15880] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 15880] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> OS libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> os libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID3244000  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID3244050  : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID3244000            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID3244050            : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    [Thr 15880] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 15880] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 12672] JLaunchRequestFunc: Thread 12672 started as listener thread for np messages.
    [Thr 15460] WaitSyncSemThread: Thread 15460 started as semaphore monitor thread.
    [Thr 15880] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 15880] CPIC (version=700.2006.09.13)
    [Thr 15880] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_14
    [Thr 15880] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID3244050]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_14
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=192M -XX:PermSize=192M -XX:NewSize=86M -XX:MaxNewSize=86M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_14-b05
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> init heap size     : 512M
    -> root path          : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120000
    [Thr 15880] JLaunchISetDebugMode: set debug mode [no]
    [Thr 12716] JLaunchIStartFunc: Thread 12716 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=192M
    -> arg[ 10]: -XX:PermSize=192M
    -> arg[ 11]: -XX:NewSize=86M
    -> arg[ 12]: -XX:MaxNewSize=86M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dstartup.mode=SAFE
    -> arg[ 25]: -Dstartup.action=UPGRADE
    -> arg[ 26]: -Dsys.global.dir=D:\usr\sap\SMA\SYS\global
    -> arg[ 27]: -Dapplication.home=D:\usr\sap\SMA\DVEBMGS00\exe
    -> arg[ 28]: -Djava.class.path=D:\usr\sap\SMA\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\SMA\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 29]: -Djava.library.path=C:\j2sdk1.4.2_14\jre\bin\server;C:\j2sdk1.4.2_14\jre\bin;C:\j2sdk1.4.2_14\bin;D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs;C:\oracle\SMA\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\OpenSSH\bin;C:\Program Files\System Center Operations Manager 2007\;D:\usr\sap\SMA\SYS\exe\uc\NTI386
    -> arg[ 30]: -Dmemory.manager=512M
    -> arg[ 31]: -Xmx512M
    -> arg[ 32]: -Xms512M
    -> arg[ 33]: -DLoadBalanceRestricted=no
    -> arg[ 34]: -Djstartup.mode=JCONTROL
    -> arg[ 35]: -Djstartup.ownProcessId=15808
    -> arg[ 36]: -Djstartup.ownHardwareId=Y0571960686
    -> arg[ 37]: -Djstartup.whoami=server
    -> arg[ 38]: -Djstartup.debuggable=no
    -> arg[ 39]: -DSAPINFO=SMA_00_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=1130
    -> arg[ 42]: -DSAPSYSTEM=00
    -> arg[ 43]: -DSAPSYSTEMNAME=SMA
    -> arg[ 44]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 45]: -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=00
    -> arg[ 50]: -DSAPSYSTEMNAME=SMA
    -> arg[ 51]: -DSAPMYNAME=BKKT031A_SMA_00
    -> arg[ 52]: -DSAPDBHOST=BKKT031A
    -> arg[ 53]: -Dj2ee.dbhost=BKKT031A
    Mon Feb 25 16:20:04 2008
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 12716] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 15780] Mon Feb 25 16:20:09 2008
    [Thr 15780] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 15780] Mon Feb 25 16:20:11 2008
    [Thr 15780] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 15780] JLaunchISetClusterId: set cluster id 3244050
    [Thr 15780] Mon Feb 25 16:20:12 2008
    [Thr 15780] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 15780] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 4828] Mon Feb 25 16:21:17 2008
    [Thr 4828] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 4828] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    [Thr 4828] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "D:\usr\sap\SMA\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID3244050
    pid         : 7528
    system name : SMA
    system nr.  : 00
    started at  : Mon Feb 25 16:27:52 2008
    arguments       :
           arg[00] : D:\usr\sap\SMA\DVEBMGS00\exe\jlaunch.exe
           arg[01] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[02] : -DSAPINFO=SMA_00_server
           arg[03] : pf=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=1130
           arg[06] : -DSAPSYSTEM=00
           arg[07] : -DSAPSYSTEMNAME=SMA
           arg[08] : -DSAPMYNAME=BKKT031A_SMA_00
           arg[09] : -DSAPPROFILE=D:\usr\sap\SMA\SYS\profile\SMA_DVEBMGS00_BKKT031A
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 7060] Mon Feb 25 16:27:52 2008
    [Thr 7060] *** WARNING => INFO: Unknown property [instance.box.number=SMADVEBMGS00bkkt031a] [jstartxx.c   841]
    [Thr 7060] *** WARNING => INFO: Unknown property [instance.en.host=BKKT031A] [jstartxx.c   841]
    [Thr 7060] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 7060] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> OS libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\SMA\DVEBMGS00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : BKKT031A
    -> ms port    : 3901
    -> os libs    : D:\usr\sap\SMA\DVEBMGS00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE

    Hi Bruyneel,
    I've solved the problem. I think while doing kernel or component upgrade SAP clear all configuration that connected from ABAP and JAVA. You can re-config from config tool.
    1. Goto \usr\sap\<SID>\<SIst.Num>\j2ee\configtool and execute go.bat
    2. cluster-data -> global server configuration -> services -> com.sap.security.core.ume.service.
    3. Configure:
    ume.login.guest_user.uniquefields with J2EE_GUEST, and make sure the user is already exist in ABAP
    ume.persistence.data_source_configuration     dataSourceConfiguration_abap.xml
    ume.r3.connection.master.ashost
    ume.r3.connection.master.client
    ume.r3.connection.master.passwd : with SAPJSF user's password
    ume.r3.connection.master.sysnr
    ume.r3.connection.master.user : SAPJSF User
    Refer for this link for help: http://help.sap.com/saphelp_nw04s/helpdata/en/20/361941edd5ef23e10000000a155106/frameset.htm
    Thanks & Best Regards,
    Yan

  • How to install iPlanet Administrative Server while installing iPlanet Web Server Ver 6.0 Service Pack 3 in SUN Ultra 10,Solaris 5.8

    We are the partner of Sun Developer Connection Program.
    Company: ITI Ltd.
    Member no: 1024878
    We tried to install iPlanet Web Server ver 6.0
    Service Pack 3, in Sun Ultra10 Solaris 5.8 machine.
    During the time of installation it is giving Error:
    Failure installing iPlanet Administration Server
    Do you want to continue? if Yes
    it starts poceeding with the installation and again gives an Error:
    Failure installing Core Java Classes.
    Do you want to continue? if Yes
    It completes the installation.
    But startconsole cannot be executed.
    Please send the solution.

    May I ask where did you get the bits for iWS 6.0 SP3? The latest version currently available for download is iWS 6.0 SP2.
    http://wwws.sun.com/software/download/download/
    Thanks

  • How does one tell if the J2EE services are running with Unlimited

    How does one tell if the J2EE services are running with Unlimited
    security? We have applied the export Policy to the server but we do notsee any reference to it running with it. .we apply the Service packs SAP now upgrades that JAVA as well . Do that process treat the JAVA
    lib/security area correctly.

    Just out of curiosity... Is there something you do
    like about Mac/Apple?
    To answer your question: no, not really. However, the points that I made here were about Safari and accompanying utilities, not about Apple in general.
    If it makes you feel any better, I am just as, or even more, critical of Micro$oft as the occasions arise...Windoze Vista is the most recent occasion and has given sufficient reasons and opportunities to vent my spleen that I actually have eased up on Apple, politicians, nut-case religious extremists, cell phone owners, and the Department of Homeland Paranioa, etc., due to an exhaustion of creative energy.

  • J2ee services in tcp/ip port 80

    Hello
    Unix server will not allow to open socket lower then 1024, unless process run as root.
    how can I run portal (or any other J2ee service) in port 80 under unix?
    TNX
    Erez

    Hello
    For ICM SAP gave a solution. (profile parameter + chmod of executible)
    is there similar for J2ee
    Erez

  • Automatic Start of J2EE services

    Hi
    I am trying to configure J2EE services to start automatically after boot in Windows 2000.
    Most of SAP* services in "services mananagment" are already configured to startup automatically, including SAPDB (this wasn't the default).
    I started manually via MMC and checked 'services managment' but I did not find any obvious service that were stopped and became running.
    What is the trick?
    Regards.

    Hi Ronaldo,
    you mean to configure the J2EE Engine to start automatically, right? To do that, set the value of the Autostart parameter to 1 in both profiles START_<InstanceID>_<host> and START_<Central instanceID>_<host> under \usr\sap\<SID>\SYS\profile directory. Then the J2EE Engine will be automatically started when windows boots.
    Regards,
    Ivo

  • [svn] 2891: Add the web-tier compiler for J2EE to the Flex open source code base.

    Revision: 2891
    Author: [email protected]
    Date: 2008-08-19 07:35:22 -0700 (Tue, 19 Aug 2008)
    Log Message:
    Add the web-tier compiler for J2EE to the Flex open source code base.
    Added Paths:
    flex/sdk/trunk/modules/webtier/
    flex/sdk/trunk/modules/webtier/bootstrap/
    flex/sdk/trunk/modules/webtier/bootstrap/build.xml
    flex/sdk/trunk/modules/webtier/bootstrap/java/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/META-INF/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/META-INF/taglib.tld
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/default.properties
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/bootstrap/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/bootstrap/BootstrapBodyTag.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/bootstrap/BootstrapClassLoader.jav a
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/bootstrap/BootstrapFilter.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/bootstrap/BootstrapServlet.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/bootstrap/BootstrapTag.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/bootstrap/TagGenerator.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/jsp/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/jsp/FlashVarTa g.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/jsp/MxmlTag.ja va
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/wrappers/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/wrappers/ATGFi lterConfig.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/wrappers/ATGHt tpServletRequest.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/wrappers/ATGSe rvletConfig.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/wrappers/ATGSe rvletContext.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/server/j2ee/wrappers/J2EEW rapper.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/util/
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/util/FileUtils.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/flex/webtier/util/J2EEUtil.java
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/hitachi.properties
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/interstage.properties
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/jrun.properties
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/tomcat.properties
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/weblogic.properties
    flex/sdk/trunk/modules/webtier/bootstrap/java/src/websphere.properties
    flex/sdk/trunk/modules/webtier/build.properties
    flex/sdk/trunk/modules/webtier/build.xml
    flex/sdk/trunk/modules/webtier/coldfusion/
    flex/sdk/trunk/modules/webtier/coldfusion/build.xml
    flex/sdk/trunk/modules/webtier/coldfusion/lib/
    flex/sdk/trunk/modules/webtier/coldfusion/lib/cfmx_bootstrap.jar
    flex/sdk/trunk/modules/webtier/coldfusion/src/
    flex/sdk/trunk/modules/webtier/coldfusion/src/java/
    flex/sdk/trunk/modules/webtier/coldfusion/src/java/coldfusion/
    flex/sdk/trunk/modules/webtier/coldfusion/src/java/coldfusion/bootstrap/
    flex/sdk/trunk/modules/webtier/coldfusion/src/java/coldfusion/bootstrap/BootstrapBodyTag. java
    flex/sdk/trunk/modules/webtier/coldfusion/src/java/coldfusion/bootstrap/BootstrapTag.java

    JLundan,
    I want to thank you for responding to the thread I started on the forum at java.sun.com. Your solution to my problem of needing to print the code of the html pages that the file I included generates was just what I was looking for. However, I have some further questions to ask, if you don't mind. To clarify my task I should say that your rephrasing of the problem is accurate: "You wan't to display the contents of the HTML file that the web server produces in response of client's request?"
    Yes, this is what I need to do, but also it needs to display the source code of that html file that the server produces in response to the client's request. Also, in this case, I am the client requesting that the server return some html file, and I'm not sure where the server is. But the webserver.java file that I shared on the forum is on my local machine. I was wondering if I could modify this webserver.java file at my home so that any html file the server returns to me would automatically display the source code. This is a school project of mine and I am stuck on this one thing here.
    Further, where would I put the "foo.html" file so it can be written to?
    FileOuputStream fos = new FileOutputStream("foo.html");
    fos.write(bytes);
    fos.close();
    Thanks so much for your help. I look forward to your response, at your convenience.
    Regards

  • Certification for WEB COMPONENT DEVELOPER FOR J2EE[tm]

    Hi all,
    I'm thinking of getting certified as a
    WEB COMPONENT DEVELOPER FOR J2EE[tm] PLATFORM.
    What is your experience? How do I prepare best for the exam?
    Any book / tutorial particulary useful?
    Thanks for your input!
    Anja

    For what its worth, I found this the easiest of the certifications (compared to Programmer and Developer). My 2 cents of advice includes:
    - Use the Sun objectives as the driver for your study. Review the objectives thoroughly and make detailed notes by section. http://www.javaranch.com/scwcdlinks.jsp has some good examples of this (plus a lot of other useful stuff). The exam is a bit of a memory test - you need to know details of the deployment descriptor, the taglib definition, listeners, the API etc.
    - Take the time to read the servlet and JSP specifications. Although on first sight these are large documents, much of them is reference material and they can be read in a couple of hours. They will help in making the detailed notes.
    - Go over the servlet API for the key methods.
    - If you've not been working with servlet/JSP technologies, read a good book on servlets / JSPs for general background.
    - Try a few mock tests, although there are far fewer available than for JCP. Avoid the ones that charge a fee - I found them less than helpful.
    - This is probably just me, but be careful if you book the test via the web. I did just that, and when I turned up at the test center they had never heard of me. Follow-up with a phone call to the actual center to ensure that they are expecting you.
    Good Luck!

Maybe you are looking for