Web-based UI without portal

Hi,
Is it possible to use the web-based UI for travel management without installing a portal? If so, does anyone have a guide/some useful links around this?
Thanks
Adrian

Hi Adrian,
You can read the Scope, Architecture, Transaction Flow & Development Tools.
Scope
The scope is to define the architecture using
SAP as an ERP
BAPI as Business API for SAP
Liferay as the Content management System.
Architecture
The architecture followed here is disconnected where the SAP system, the BAPI and the Liferay are setup to be disconnected, when there is a need of data all three systems connect together and the data is queried and posted. The data is queried form Liferay using BAPI and the response is them posted to Liferay. Liferay will be responsible to process the data using its inbuilt features and post the final information to SAP for further processing it.
              JAVA
            CONNECTOR
SAP SYSTEM -
> BAPI----
> WEB UI - LIFERAY :
                                                    User Management
                                                   ESS
                                                   MSS
                                                   HR Admin Scenario
                                                   Time Admin Scenario
                                                   Payroll Admin
                                                   Statutory Reports
                                                   Liferay Workflow
                                                   Liferay Announcement
                         Liferay Database -
Liferay User Defined tables
SAP system as an ERP which holds the Employee information. Business Application Programming Interfaces (BAPIs) enable access to SAP functions by making use of Java Connector (JCo). Liferay will make of BAPIs for creating, retrieving and updating information in SAP system. Liferay holds the Web User Interface. Liferay internally has its own database which contains many user defined tables. The Organization Unit (OU) details which include Users, Roles, Communities, Organization is stored in Liferayu2019s internal database.
Transaction Flow
The data transaction pattern in this application needs to go thru a series of events to complete the cycle of posting information to sap.
Where a transaction is started the data first resides into a temporary location under liferay database, exposing itself to workflow, the workflow will then pick the data for its process if there is no workflow setup it is considered the record as approved and post the data to sap. Else it will expose the record to the respective levels and positions and wait until the records gets approved. Once the record is approved it is posted to SAP.
The Flow diagram below shows how the data is transacted to sap system.
               Data Submitted in Liferay UI
               Temp Storage table in Liferay Database
               If Record has Next Level Approval   - - - - if no then post data to SAP
               (Perform Workflow Task)
               If Record is approved
               Record Marked as Rejected
Development Tools
Application - Netbeans 6.9
Database - My SQL
Tomcat 6.0
Cheers
BLITZZ27

Similar Messages

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

Non web-based content in portal

Hi all,
Is it possible to run ordrinary windows-applications with a GUI-screen, for example MS Outlook, in or from within the portal?
If yes: Where can I find out more?
Regards,
Sturla

Hi Jørgen,
Thanks for the reply.
I don't know much about the portal, but I attended a couple of cources last fall. Never used the product since then, and I can't remember too much form the cources. My boss keeps asking me questions about the portal, and lucky me told him that I beleived the content had to be web based, like for example Outlook Web Access. He wasn't pleased with my answer, so I keep seraching...
I came over Citrix MetaFrame Presentation Server . Maybe that coud be the solution(?)
Regards,
Sturla

500 Internal error observed while accessing a Static Web based course

Hi Experts
When I try to start a static web-based course in portal, a 500 Internal server error comes up on the screen and the course not played at all.
Please suggest.
Regards
Shaily

Hi Shaily,
Give some more details about product and also share screen shot for error
Regards,
Dhuvaraganathan M.

IBNS web-based authentication HTTPS intercept

Hi everybody,
Hopefully this is an easy question.
I have configured an IBNS setup with Wired Web-Authentication. To sum this up: connect a computer to the switch, go to a web page, the switch intercepts the http request, sends you a log-in page, you log in and get directed to the original web page.
For this, I have used the following guide http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/app_note_c27-577494.html
Before I implemented this, I had the HTTP and HTTPS server on the switch disabled. But if I disable the HTTP serer (and leave the HTTPS server enabled), the switch doesn't intercept the web pages anymore. Is there a way to use web-based authentication without using the HTTP server and using only the HTTPS server on the switch?
Hope someone can help me with this.
Thanks
Ian

Well I haven't had any luck getting an iPhone to present an SSL certificate to an IIS7 ASP.Net webserver.
The same .p12 certificate works on IE7, PocketIE (WM6), Firefox and Safari (PC version). The website is set to Require an SSL certificate. From the Windows Mobile or PC browsers, you get a prompt for the client certificate. I have tried Nick's website and the iPhone will prompt to choose between his and my certificates, however with IIS7 you just get a 403.7 client SSL certificate required error.
I have turned on SSL tracing in HTTP.Sys and get the following (edited for length) :
<Opcode>SslInititateSslRcvClientCert</Opcode>
- <Keywords>
<Keyword>Flagged on all HTTP events handling ssl interactions</Keyword>
</Keywords>
<Task>HTTP SSL Trace Task</Task>
<Message>Server application is attempting to receive the SSL client certificate, which will be provided if available. If the client certificate is not available, a renegotiation will be initiated.</Message>
<Channel>HTTP Service Channel</Channel>
<Provider>Microsoft-Windows-HttpService</Provider>
... then after various SSL negotiations and receive raw data traces I see...
<Opcode>SslRcvClientCertFailed</Opcode>
- <Keywords>
<Keyword>Flagged on all HTTP events handling ssl interactions</Keyword>
</Keywords>
<Task>HTTP SSL Trace Task</Task>
<Message>Attempt by server application to receive client certificate failed with status: 0xC0000225.</Message>
<Channel>HTTP Service Channel</Channel>
<Provider>Microsoft-Windows-HttpService</Provider>
Which basically seems to mean a "not found" error.
Anyone had any luck with iPhone to IIS 7 (which we have to use as it is an ASP.Net website)?

Web Based Application Single Sign on With Enterprise Portal

Good day Developers,
My question is really a two part question so forgive me in advance for asking in one post as I think they are relative to each other. My project is currently exlporing the creation of functionality that will allow the following:
1. We want to allow a secure Web Based application possessing the abilitiy to auithenticate the user into Enterprise Portal and by passing the login screen to get to a landing page/iview in our Enterprise Portal instannce.
2. We want the abilitity to perform a check of the user and create the user in the enterprise portal on the fly if they do not already exist.
So far in my research I've come across tools and white papers mentioning the use rof oAuth and OpenID. Is that the right way to tackle these two items. Thanks for your help in advance.
JD

Hi
1. You can do SSO between you application and portal using Verisign or third party authentication tool. I am not pretty sure how landing page and all will work as you mentioned.
As portal is web based, you can deply your application in portal server. So that you will not need any other authentication tool.Also you can save effort , cost.
2. By deploying application in portal also you do not have to concentrate on User management, which is itself a huge effort you have to put. Else you can go for third party tools like Identity management or ADS.
-Yogesh

My comapny has a web based portal for assigning work. Last week I lost the ability to connect to it through a tethered laptop using my Galaxy S5. It worked for the last several years using my drois phones. I can acess it from my home PC, through networked

I can no longer access my company's web based portal through a tethered laptop. All other web pages work. Has anyone experienced anything like this? It's a verizon problem for sure since I can get to it from every other method...

It could very well be Verizon where you're able to access from your home PC. But have you tried looking into the Laptops operating system Device Manager to see if that gives any indication of anything, like perhaps possible network driver update?

Does the UC540 include or support a web based user portal?

One last question because I can't find this for the life of me. When looking at Avaya IP Office they include a web based portal that is installed on a server or on their server module for the system. Does the UC540 include that or allow that function at all? Basically I'm trying to find out if it includes or supports even via add on a user portal where users can log in, see their call history, listen to voice mails, possibly see who is on the phone, and if possible change their call flows from there. So for example set that they are working from home vs the office. Is that built in or supported or anything at all? Thanks so much!

The thing I'm just not clear on is what the UC540 includes, as I'm comparing it to Avaya IP Office which seems easier to understand. A user portal isn't that big of a requirement but I'm more wondering how it works for teleworkers or mobile twinning as Avaya calls it.
For example, one place says buy the UC540 for $1899. Just using it as an example, lets say I was to buy that.
Am I able to set it so that:
1) If working remotely, calls ring on my desk and mobile at the same time, like Avaya's mobile twinning? And if so, is it something users can enable or disable easily, either from their phone, or a web portal etc?
2) If I am on the road, Avaya has the one-x iPhone application, where you launch it, dial a number, it calls into the Avaya PBX, and makes an outbound call showing it's my office calling. So basically DISA. I don't need an application for that, but does the UC540 support calling into it and dialing out so it shows the office line calling?
3) Last and most importantly, does it include built in any ability for a softphone so that a user can work from home one day, launch the softphone on their laptop with a USB headset and then make calls and have incoming calls ring there as well?
We use Asterisk, so we can do the above right now but it's not really pretty. Like option 1 above is possible and easy to do. Option 2 is so so, it's def not as easy as the one-x app by Avaya. Instead users have to call our main line, dial a code at the IVR and then get an outbound line that shows their caller ID. So each user needs that manually set up in the system, it's not a built in feature. Then option 3 is possible but also not ideal as the soft phone needs its own extension and then ring groups are needed to ring their line to all their extensions etc.
Just comparing the Avaya to Cisco and I'd REALLY prefer the Cisco it's just the Avaya seems to handle the above better which is our main features we want so just trying to determine if the UC540 can do this out of box and if not what I'd need to enable it. Thanks!

Hi all **help needed with the SMO (Web Based Ordering Portal) integration

Hi SD experts
Could someone please explain me the concept of integrating SMO (Web Based Ordering Portal) integration.
Thankyou very much
Bj

...I earnestly urge the Oracle gurus to help me with my issueWell most of the 'gurus' on this forum are not Oracle employees and can't really help to resolve this. We can only offer suggestions. There's no link from this forum to an Oracle manager. The only direct contact to Oracle is through creating an SR -- and that's generally for issues specifically with certification rather than with OE training.
That said, I used to work for Oracle. If there is any time not to have high expectations for customer service it's in December. The vast majority of employees take a significant percentage of their annual vacation that month. If I were to hazard a guess at what caused at least some of your issues, I'd say you got at least somewhat caught up in that.They also do a lot of system maintenance in December. I didn't work for OE but rather for Support, but I'd suspect they are similar. Towards the end of December, the place resembled a ghost town.
I haven't used OE's online interface to order training. I just tried it a minute ago (up to the point where I was going to start committing to things I don't want, anyway) and I don't see how this much confusion can be generated. Since you indicated they used your credit card information for payment, I don't grasp why they would have any reason to talk to the company you are currently contracting for.
Regardless of how it happened, Brandye (the moderator and an Oracle employee) might be able to suggest something specific. My own suggestion would be to grit your teeth and order again (the interface appears to be up). Provide only contact numbers/addresses to you and put 'Independent Contractor' down as the company. They really want to sell you the training. I'm confident that you'll be able to... eventually.

Registering the Web based application as a Partner Application

Good day
I went through the suggested documentation of registering a
web based application as a partner application of the SSO Login Server.
I installed the SSOSDK.JAR and went through the demo application (JSP Demo)
which consists of the following programs :
papp.jsp
ssoinclude.jsp
ssoEnablerJspBean
SSOEnablerBean
SSOSignon
As per the technical documentation,I register this demo application as a
partner application.
1 - The source code of the papp.jsp checks for the existence of the user
through method of ssoEnablerJspBean [getSSOUserInfo(request, response)] which
calls method of SSOEnablerBean [getSSOUserInfo (request, response) and this
method calls getUserInfo(p_request) of SSOEnablerBean (the same program) to
check the existence of the application cookie.
2 - If it doesn't exit , it redirect it to the SSO Login page for user
authentication.Once the user is authenticated, a SSO login cookie is created on
the client's browser and redirects back to the SSOSignOn.
3 - The SSOSignOn program creates the application cookie and redirects back to
the entry point of the demo application which is papp.jsp.
My Questions are as follows :
1 - Instead of creating a session object within my web based application to hold some
information used between the different pages, can I define them in the
application cookie? kindly advise? Is there any limitation for the length of
the application cookie? If yes, what will be the risk?
2 - The SSOSignOn program is calling a method in the SSOEnablerBean
[setPartnerAppCookie(response, request). Within this method , it is retrieving
the parameters values of the request object as :
request.getParameterValues("urlc")[0];
What is the role of this [urlc]? Is it hard coded? Can I change it?
3 - In order to ensure that I am still dealing with the same user, shall I put
the above security check procedure on each page of my weeb based application? Kindly advise?
Thanks in advance for your prompt feedback
regards

Dear Paul
I think there is a misunderstanding regarding the last correspondence.
I am talking about the customized home page of the PORTAL and not the home page of my web based application (JSP) .So in this case, Am I able to use the customized home page which contains a login portlet instead of the default Login page of the SSO Login Server.Kindly advise!!!
On the other hand, I am facing a problem during the surfing of the web based application.
The web based application consists mainly of two packages :
Package I : Bank.counter which contains a set of jsp pages.
JSP_HOME_COUNTER (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER_DETAIL
Package II : Bank.portfolio which contains a set of jsp pages.
JSP_HOME_PORTFOLIO (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_PORTFOLIO
JSP_MAIN_FRAME_PORTFOLIO
Please note that the SSO classes are residing under the first package.
As agreed on in the third question, I am including in each page of my web based application, a security check procedure as follows :
<%@ include file="ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Please note that all the jsp page of the portfolio package are pointing to the SSO classes as follows :
<%@ include file="../counter/ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Once I invoke the JSP_HOME_COUNTER , it will render the JSP_LEFT_FRAME_COUNTER page and
JSP_MAIN_FRAME_COUNTER page which invokes the SSO Login page. Once the user has been authenticate, the result of the JSP_MAIN_FRAME_COUNTER is rendered successfully. The result contains an hyperlink to the
JSP_MAIN_FRAME_COUNTER_DETAIL page. As the user has been authenticated , this page is rendering automatically the result without displaying the SSO Login page. (Perfect as of now!!).
Once I invoke the JSP_HOME_PORTFOLIO from the JSP_HOME_COUNTER, it runs the security procedure without any rendering of the SSO Login page (fine!!) but redirects me back to JSP_HOME_COUNTER instead of rendering the result of the JSP_HOME_PORTFOLIO.
please note that the m_requestUrl variable in the SSOEnablerJSPBean class has been assigned the folowing value : JSP_HOME_COUNTER
Kindly advise .

Authentication between Single Sign-On and Web based applications

Hi everyone,
I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following:
Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application throught the portal, in my case, an ASP application (not .NET, just ASP).
I made a test creating a External Application in SSO and after publishing this portlet (external application) inside portal.
It worked, BUT I was prompted to inform username/password to log on the aplication.
So, the user end up entering his password twice.
Does anybody know a way to acomplish this task?
The documentation I'm researching is:
Oracle Application Server Single Sign-On
Administrator's Guide
10g Release 2 (10.1.2)
B14078-02
Oracle Application Server Single Sign-On
Security Guide
10g Release 2 (10.1.2)
B13999-03
Thank you very much,
Diogo Santos.

have figured out how to secure any HTML, ASP, PHP, CFM, etc. web page again Portal / OID using the PDK toolkit.
Using AJAX (Asynchronous JavaScript and XML) and one Oracle Stored Procedure just adding a simple Javascript call to any HTML, ASP, PHP, etc. web page can secure it via Oracle SSO (OID). Access to any secured web page will require that it to be linked from an authenticated Portal session or a page opened in an authenticated Portal session.
This process can be easily modified to add in group security etc. This is just my starting point.
1) Create a stored procedure
# Make sure it has access to portal.wwctx_api.is_logged_on
CREATE OR REPLACE PROCEDURE login_ajax_check (
display_error IN number default NULL) AS
BEGIN NULL;
If portal.wwctx_api.is_logged_on = false then
htp.prn('DENY');
ELSE
htp.prn('ALLOW');
END IF;
Exception when others then htp.p('DENY');
END;
2) Use this Javascript in any page you wish to secure.
<-- Begin Paste Here -->
<script>
var allowgo=2
function ajaxCallRemotePage(url)
if (window.XMLHttpRequest)
// Non-IE browsers
req = new XMLHttpRequest();
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
else if (window.ActiveXObject)
// IE
req = new ActiveXObject("Msxml2.XMLHTTP");
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send();
else
return; // Navigateur non compatible
// process the return of the "ajaxCallRemotePage"
function CheckPortal()
ajaxCallRemotePage('[Your page calling the procedure from above]');
function processStateChange()
if (req.readyState == 4)
if (req.status == 200)
if (req.responseText.substring(0,4) == 'ALLO')
allowgo = 0;
else
allowgo = 1;
function doPage()
if (allowgo==1)
window.location='[Your login or error page]';
CheckPortal();
doPage();
</script>
<-- End Paste Here -->
That's it!!! Super easy. It works great too.
Larry Schenavar
[email protected]

Web Dynpro ABAP Stylesheet - Portal Integration

We have a Web Dynpro ABAP being displayed through a Portal iView. The Portal server and the Web Dynpro ABAP server are separate. Our problem is in getting the Web Dynpro ABAP to use the stylesheet of the Portal.
We can make this work by forcing an external stylesheet (via application parameters, global Dynpro settings, or passed on the end of the URL), but we have to hard-code the full URI of the Portal stylesheet. This would be very hard to manage if we hard-code every iView's CSS location (or set every individual Web Dynpro's application parameters), and we want instead for the Portal to supply whatever the user's stylesheet is dynamically.
So what we want is: if we change the Portal stylesheet, the Portal would just pass the new stylesheet URI to our ABAP Web Dynpro iViews without manual modification of the iViews.
Here is an example of what works:
http://our-abap-server.com/sap/bc/webdynpro/sap/cprojects?sap-ep-themeroot=https://our-portal-server.com/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/ourportalstylesheetname
Shouldn't the Portal iView automatically pass sap-cssurl or sap-ep-themeroot to Web Dynpro ABAP? We have "Supply Portal Stylesheet" checked on the iView it just doesn't pass anything to the Web Dynpro ABAP. Why wouldn't SAP pass this parameter dynamically to the Web Dynpro ABAPs? Is this a product error?
There seems to be a great deal of confusion about this on the SDN message forums... I think this may be the core issue.
We are using a 7.0 SP13 Portal with an ECC 6.0 SP12 backend.

Now that you mention it, I ran into that exact same issue -- the application parameters didn't work for hard-coding the theme. The fix ended up being the web server semicolon thing I mentioned earlier (that was why the parameter didn't make it to the backend).
The themeroot is automatically sent to the backend from the portal, so you shouldn't really have to manually send it as a parameter anyways.
I'd suggest talking to your network guys. Also this could be the result of the SP you are on (we're on 13 for the portal and the backend system -- maybe this feature doesn't work in some earlier SP's?). There are also some options to force the theme as a WD application parameter on the backend side, which you could check into. Details on those are here:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/fb57412df8091de10000000a155106/frameset.htm]
Also you could look at the requests being made by installing HttpAnalyzer in your browser. You can inspect "post" parameters going from the portal to the backend system. One of those posts (the first one to the backend system) should contain the parameter sap-cssurl (same kind of thing as sp-ep-themeroot). This is where our problem turned up as this parameter was not being posted.
Lastly, make sure that your frontend portal and backend portal are in the same domain. For instance:
frontend.domain.com
backend.domain.com
If your backend and frontend are in different domains it messes all kinds of things up, including stylesheets I think. If you can't get around this, then read about domain relaxing (but I highly recommend getting the domains the same).
When we started, ours were:
portal.dx.company.com
sap.company.com
This created all kinds of problems. Putting our systems in the same domain with the same protocol and fixing our little semicolon web server problem fixed basically all of our portal complaints. Up until that time, we had also had many problems with session management (backend sessions were getting stuck until the HTTP timeout).
That's all I know. Good luck.

Not able to run web dynpro application from portal.

Hi portal experts,
I want to run my web dynpro application from portal.
So created a seperate iview and a role for the purpose.
Assigned the iview to the role and also mapped a abap user id to the new role created.
But when I click on 'preview' the iview , getting the following dump.
Error when processing your request
What has happened?
The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
Note
The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
Thanks,
Aditya.

Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
or there also you are getting the error.
i guess there also you should be gettign the error.
this is some problem with the FQDN settings in the abap system.
in the host name of the web dynpro applciation server one .(dot) is must.
so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
thanks
sarbjeet singh

H.264 Web based Encoder Demo

Hi,
before some weeks ago i red a newsletter that adobe has include a h.264 encoder in FP 11.
Well, here we go i thought and start to develope a web based h.264 encoder for our CDN. Here is a first version that i want to share with you developers.
Onlinelib Web Encoder Version 0.2:
http://onlinelib.de/labs.html
Please do not use this in serious projects. You will need also a RTMP Server for testing and of course a web-player. I will include a player option inside the encoder for internal testing.
There are a lot of features missing, but the basic h.264 encoding is working on my Mac Pro and our CDN.
What i found out during the development:
Please correct me if i post something wrong.
Contra:
- AAC Encoding for Audio is missing. Without AAC we cant product ipad / iphone compatbile streams. Flash iOS cross-compiler supports CPU native speex decoding, same for nellymoser, but you cant mix them cause native h.264 decoding in iOS is also not working and you cant send the iOS native quicktime player a bytearray for decoding h.264.We can have access to the raw micro data, but its useless cause you cant transmux the packets to the camera stream. I think a native AAC encoder in AS3 or alchemy is possible but without more access to the encoder its useless.
- No Stereo Encoding. That is really a big minus point. I study all docs and cant find if its possible to encode 2 channels.
- No access to compressed frames for video or audio. Without getting access to the compressed frames we cant use HTTP streaming, packing for the new HTTP protocol that is accessable sinse FP 10.1. In times of hacks and security its important that we developer can protect our streams with own encryption technologies. Not possible right now. RTMP(e) is a option, but this encryption is really useless (my 2 cent mind). A DES is stronger than the hole RTMP(e).We also are not able to calculate our own bandwidth alogs.
- I thought that adobe will include VP8 Encoder / Decoder in FP11. I hope they will do this.
Pro:
- I think the encoder is based on MainConcept SDK, works for me. Baseline and Main is fast enought toDo realtime. I cant find a way to set motionVectors, bframes that can be used in mainprofile. I saw that in some level(s) profile h2.64 the encoder makes some strange colorspace effects (false colors).
-We can change cameras, micro, bitrate, fps during a streaming-sessions. That´s cool and not possbile with Flash Media Desktop (FME) Encoder. You have to disconnect the FME first, then set the changes re-connect again.
- p2p is also working and you can mix server and p2p. We port the rtmfp protocol to an embedded device:
http://walyou.com/img/world-smallest-pc-space-cube-4.jpg
The p2p option in the public encoder is not useable cause adobe has patent-rights on the rtmfp protocol. If i have time i will inlcude a cirrus service.
Best,
Gary
http://onlinelib.de

Thanks for the input. What do you mean by encoding it as H.264 not mp4 - which setting affects that?
Maybe I already has it?
here is what I have now:
Video compression setting
Compression type: H.264
Frame rate: current fps
Key frames: every 24 frames
Frame Reordering: Yes
Compressor quality: High
Encoding: Best Quality (Multi-pass)
Data rate: Restrict to 800 kbits/sec
Optimized for: Download
Sound
Format: AAC
Channels: mono
Rate: 44.1 kHz
Show advanced setting: yes
Render setting:
- quality: normal
MPEG 4 AAC LC Encoder Settings:
- Encoding stratey: Average bit rate
- Target bit rate: 96 kbps
Inspector panel
File format: Quicktime Movie
Extension: mp4
Allow job segmenting: yes
Video setting: Enabled
Audio setting: enabled
Streaming: none

CALL WEBI Report from SAP Portal

Hi Experts,
I need to call WEBI report from SAP Portal, is it possible?
The submitted report will be opened in the same window?
Kind Regads.

Hi
You can call SAP portal from WebI Report...
insert blank cell in the report / or select the cell whaere do you want to in the report
and then Right click and select hyper link.
Enter the portal address
It will be opened in the same or new window based on your settings.
Target Window : New Window ..then it will open new window.

Web-based UI without portal

Similar Messages

Maybe you are looking for