Web link to pass the parameter to custom web app then update the field

Hi,
I have created the web link in service request object to refer Account Object. I want to let user able to select the account from web link then base on the current SR no and account that have created update the record in CRMOD. My question is how to pass the parameter out to my external web app so that they can update my SR correctly?
Thank you

Hi Messer,
I have put in the syntax as below :-
https://secure-ausomxega.crmondemand.com/OnDemand/user/AssocAccountPopup?mapBC=Service+Request&OACTRL=Account&ophi=PopupNewForm.Account+Id&pfid=PopupNewForm&OMTHD=AssocPopup&OMTGT=PopupSearchList&assocInit=Y&opht=4&OAOBJ=Service+Request&mapField=Account&ophd=PopupNewForm.Account&ophpd=3&disableclear=Y&ophr=AssocAccountPopup&assocval=&ParentType=Edit
This pop up screen wil let the user to select the account then i will pass the account and the SR to external web app to update back the CRMOD. I am not too sure the above syntax is correct or maybe can you give some example.
I am new in CRMOD, hope that you can advice on this.
Thank you,
SK

Similar Messages

I need to run the program in back ground and then update two fields

hi gurus
i need to run the program in back ground and then update two fields in the z table by mm02 transaction by using bapis , can any one give me the code for this.
Message was edited by:
Rocky

hi
good
go through this link
http://www.sapdb.org/7.4/htmhelp/34/ee7fba293911d3a97d00a0c9449261/content.htm
thanks
mrutyun^

How do I Pass a parameter to a SQL Component Task where the source SQL statement is also a variable

Hi,
I have been tasked with making a complex package more generic.
To achieve this I need to pass a parameter to a SQL Component Task where the source SQL statement is also a variable.
So to help articulate my question further I have create a package and database as follows; -
USE [KWPlay]
GO
/****** Object: Table [dbo].[tblTest] Script Date: 05/14/2014 17:08:02 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[tblTest](
[ID] [bigint] IDENTITY(1,1) NOT NULL,
[Description] [nvarchar](50) NULL,
CONSTRAINT [PK_tblTest] PRIMARY KEY CLUSTERED
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
I populated this table with a single record.
I unit tested the SQL within SSMS as follows;
SELECT * FROM dbo.tblTest
Result; -
ID
Description
1
Happy
DECLARE @myParam NVARCHAR(100)
SET @myParam = 'Sad'
UPDATE dbo.tblTest SET [Description] = @myParam FROM dbo.tblTest WHERE ID = 1
SELECT * FROM dbo.tblTest
Result; -
ID
Description
1
Sad
Within the package I created two variables as follows; -
Name: strSQL
Scope: Package
Data Type: String
Value: UPDATE dbo.tblTest SET [Description] = @myParam FROM dbo.tblTest WHERE ID = 1
Name: strStatus
Scope: Package
Data Type: String
Value: Happy
I then created a single ‘Execute SQL Task’ component within the control flow as follows; -
However when I run the above package I get the following error; -
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "UPDATE dbo.tblTest SET [Description] = @myParam FR..." failed with the following error:
"Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Package: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.
The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the
errors.
SSIS package "Package.dtsx" finished: Failure.
I also tried; -
Name: strSQL
Scope: Package
Data Type: String
Value: UPDATE dbo.tblTest SET [Description] = ? FROM dbo.tblTest WHERE ID = 1
However I received the error; -
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "UPDATE dbo.tblTest SET [Description] = ? FROM dbo...." failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Package: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Tried; -
Name: strSQL
Scope: Package
Data Type: String
Value: UPDATE dbo.tblTest SET [Description] = ? FROM dbo.tblTest WHERE ID = 1
and; -
Result; -
SSIS package "Package.dtsx" starting.
SSIS package "Package.dtsx" finished: Success.
Therefore the answer was to put the parameter number rather than the parameter name under the parameter mapping tab-> parameter name column.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

I bougth a macbook used from another person. I already set all accounts to my apple id, but only in APP STORE, when I try download the new version of a app, it request the old apple id from the another guy. I already terminate the session and init another

I bougth a macbook from anotner person.
I already change th apple id in all places.
But only in app store when I choose download the new release of a app, it request the password of the old apple id, and i can't switch this apple id to my apple id.
Where i should change for this?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1, 64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB . I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes. I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes" In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

Why can't I open PDF files on my iMac. I installed Adobe Reader and accepted the end user license, as instructed then quit the application and relaunched it and I still can't view the PDF document. The screen comes out black. Please advice. Thanks

Why can I view PDF files from the Web on my iMac even after I installed Adobe Reader and accepted the end user license agreement.I then quit the application relaunched it, as instructed snd still the PDF document comes out blank or black. Please advice. Thanks
Chef Rey

Are you saying that Adobe Reader or Preview can't read PDF file that you download? Or, are you saying that you can't display PDF files in your Safari broweer? If the latter, then delete any AdobePDFViewer plugins you find in /Library/Internet Plug-ins/ and restart. That should allow Safari to display PDFs in its window. BTW, that's the worst place to view them. Better to download them and use Adobe Reader or Preview.

Help i have an iphone 5s and whenever i dowload an app or update, the symbol turns to install then the circle loading, then all of a sudden it goes back to the price symbol. I am having a tough time can anyone help me.

Help i have an iphone 5s and whenever i dowload an app or update, the symbol turns to install then the circle loading, then all of a sudden it goes back to the price symbol. I am having a tough time can anyone help me.
________________________________________________________________________________ _____________________________________________________ Also all my wifi apps dont connect to the internet except for safari and maybe appstore HELP??!!!!!
Both these problems are happening at the same time so i dont know if they are linked or something but please someone help

Hello shahnaztech
They probably could be related. Start with the articles below to troubleshoot issues with Wi-Fi as well as making sure that the router is using the recommended settings.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Regards,
-Norm G.

When I click on my iPad App Store Updates, the wrong apple ID is showing up. When I go under settings the correct one is displayed under the app store.

When I click on my iPad App Store Updates, the wrong apple ID is showing up. When I go under settings the correct one is displayed under the app store.

Does the wrong Apple ID show up with a particular App or all Apps?
Apps are linked to the ID they were purchased with, so if you have Apps purchased with different IDs you may need to logout with one then log in with another to update the second one.
We've also seen were "free" Apps are downloaded from the Internet, but they are not really free but instead were just hacked by a different user so need to be updated with that account. That can prevent updates. If so, it's best to delete the bogus app and get a good copy from the App Store.
ivan

I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones.

Hi!
I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
Thank you in advance!
Best Regards,
Carlos.

Hi,
Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
* I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
* Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
I can download with the same user in the PC, in the iPhone... but not in the iPad .
I'm getting mad...

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!

Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

i have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

Here you go:
You should be able to hit the "Agree" button, if you are on an iPhone right now. On a Mac, you should just left click the button where it said "Accept". I hope this helped.
To quit the app store, simply hit these keys:
Than, you should come up with this window:
Select the app store with:
a) The up and down arrow keys
b) Your cursor
Than hit the 'Enter' button twice. This should close the app store. The force quit window is also accesible through the apple logo in the top left corner of the screen. It should say:
Force Quit...

I shall open delete my present account with iTunes and open a new one - but I do not have the password. How can I then delete the present account??

I shall open delete my present account with iTunes and open a new one - but I do not have the password. How can I then delete the present account??

Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID). That would in effect do what you want, get rid of the old and give you the new.
See "Apple ID: Changing your Apple ID"
ivan

Web link to pass the parameter to custom web app then update the field

Similar Messages

Maybe you are looking for