Web Server on Windows XP?

I need to write a servlet to provide SQL data for a cell phone. I've written a J2ME app to access text from the web, but I know nothing about the other end. Do I have to install a whole new OS like Linux, or is there software that will run under XP as a web server?

sultal writes:
If you wish to go for Webserver + Tomcat option you should opt for Apache + Tomcat as they are produced
by the same crowd and work well together.
I would personally go for one peace of software to do the job, rather than 2. Sun's appserver(platform
edition is free) or webserver would work well - you won't need Tomcat with those.OK, I uninstalled Tomcat and installed the appserver. Then I did a search on "writing servlets" and found:
http://java.sun.com/developer/onlineTraining/Programming/BasicJava1/servlet.html
At the top of the page it says you need Tomcat and gives a link for downloading Tomcat.
So now I'm confused. I guess this is referring to J2SE only and not the Application Server environment?
chilideveloper writes:
you might wanna try the Net Beans mobile edition from http://www.netbeans.info/downloads/download.php?type=5
.0Already got it. But while we're on the subject, is there anything else I need to download to get NetBeans to write an SQL servlet? (Such as the way I had to download the Mobility Pack to write the cell phone client.)
After this , you can decide any one of the following
- use Sun Java System Web Server 6.1
- use tomcat alone OK, so now I'm confused again, do I or don't I need Tomcat? What is the difference between Web Server 6.1 and Application Server 8.2?

Similar Messages

Sun Java Web Server on Windows Server 2003

Any idea when Web Server and LDAP will be supported on Windows Server 2003?
Thanks.

It has not been tested on web edition of win2003. Your best bet is install standard edition.

Oracle 10g HTTP Web Server on Windows 2008 R2 (64-bit) server.

I downloaded the Oracle 10g HTTP server for Windows 2008 R2 (64-bit) from the link below
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
10204_vista_w2k8_x64_production_companion.zip (344,455,851 bytes)
Did anyone have luck installing the 10g HTTP server on a Windows 2008 R2 (64-bit) server ?
I could see the installation went fine, but I don't see any "Oracle_HTTP" windows service getting created.

I have not installed on this OS but I'm betting the service is a different name.
Check "log on as" under services to narrow your search

Installing 64-bit ColdFusion with 32-bit Apache web server on Windows Server 2008 64-bit

This is related to another discussion that had a solution of using an unofficial 64-bit Apache, which is not permitted in my situation. The discussion is here: http://forums.adobe.com/message/3580001.
I’m having trouble running the Apache and ColdFusion services after connecting the two with wsconfig. I’ve tried replacing the 64-bit mod_jrun22.so with the 32-bit equivalent and the Apache service will then start, but the ColdFusion services error when loading the jvm.dll.
Anyone familiar with this?
Apache Web Server 2.2.22
ColdFusion 9
Thanks.

Looking into the same issue myself. Can you elaborate on this? Which version of the JVM did you upgrade to and did you configure it in the CF Admin to use that jvm?
Using the web connector, I get an error message that the mod_jrun22.so is not a valid win32 application.
Thanks

How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
Thanks

Hi,
This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
Benoit Lecours | Blog: System Center Dudes

Error ldap Java System Web Server 6.1 SP11 Windows

Hi,
I have installed a web server SP11 windows, and the global settings I have configured correctly a ldap server.
In User and Groups access to all users of the ldap server.
In my web instance, I have configure the application to autenticate to this ldap server:
acl "default";
authenticate (user,group) {
database = "default";
method = "basic";
prompt = "prompt";
When I go with a browser, appears the user and password window.
When I introduce user/password, in browser:
Server Error
This server has encountered an internal error which prevents it from fulfilling your request. The most likely cause is a misconfiguration. Please ask the administrator to look for messages in the server's error log.
And the logs errors of the web instance:
[11/Mar/2011:17:25:01] security ( 6088) https-webinstance:
     [NSACL4330] HTTP5094: while trying to get attribute "user"
     [NSACL4330] HTTP5094: while trying to get attribute "isvalid-password"
     [NSACL5860] HTTP5113: ldap password check: LDAP error: "Can't connect to the LDAP server"
     [NSACL4330] HTTP5094: while trying to get attribute "user"
[11/Mar/2011:17:25:01] security ( 6088) https-webinstance: for host trying to GET /uri/servlet/ServletIni, acl-state reports: HTTP5187: access of ... denied because evaluation of ACL default directive 1 failed
This error at solaris not appear...
I need help...
Thanks
Jorge

I did not understand very well what you told me.
The directory server is on another machine ex(m1).
I have other web server on another machine ex(m2). This web server working properly (solaris 10). And when I access to application, ldap error does not appear.
This web server (windows, SP11), is installed on my PC.
The ldap configuration on this instance is the same as another web instance (dbswitch.conf):
directory default ldap://m1:port/<base dn>
default:binddn <bind dn>
default:encoded bindpw <passwd>
From my PC I can communicate well with the server ldap, I used a ldap administration program, and users and groups tab of my web server (windows).
I open a browser on my PC, and if I access the other web server works fine.
if I access to my web server, the ldap error appear...
There are commands to diagnose problems with ldap, something about the character encoding windows-unix?
Thanks in advance

Starting java web server

i am new to java servlets. i have installed java wev server2.0 on windows 98. i am unable to start it. please someone give me the process to start it.
your help would be very much appreciated.
thank you

I have installed java web server on windows 2000 server machine. I am using the following command to start the server
<server_root>\bin>httpd
but it is display some problem and a message displaying 'shut down the server' in between.please help me.

Pool error Web Server 6.1 SP4 solaris 10

I have a web instance with a pool defined in "JDBC Connection Pools", but, when I execute a servlet than find (lookup), the JNDI names, not find nothing (listContext method).
When I find by the exact name:
InitialContext ctx= new InitialContext();
datasource = (DataSource) ctx.lookup("jdbc/POOL");
Throws a exception:
javax.naming.NameNotFoundException: WEB3885: Name jdbc is not bound in this Context
at org.apache.naming.NamingContext.lookup(NamingContext.java:811)
at org.apache.naming.NamingContext.lookup(NamingContext.java:194)
at org.apache.naming.SelectorContext.lookup(SelectorContext.java:183)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:658)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:244)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
may be happening?
The web server is installed on SunOS 5.10 Generic_118833-36 sun4v sparc SUNW,SPARC-Enterprise-T2000
I need help,
Jorge
I have configured a pool in my web instance as following:
*** server.xml:
<RESOURCES>
<JDBCCONNECTIONPOOL name="mypool" datasourceclassname="oracle.jdbc.pool.OracleDataSource" steadypoolsize="8" maxpoolsize="32" poolresizequantity="2" idletimeout="300" maxwaittime="60000" connectionvalidationrequired="off" connectionvalidationmethod="auto-commit" validationtablename="" failallconnections="off" transactionisolationlevel="read-committed" isolationlevelguaranteed="off">
<PROPERTY name="User" value="user"/>
<PROPERTY name="URL" value="jdbc:oracle:thin:@<ip>:<port>:<sid>"/>
<PROPERTY name="Password" value="passwd"/>
</JDBCCONNECTIONPOOL>
<JDBCRESOURCE jndiname="jdbc/POOL" poolname="mypool" enabled="on"/>
</RESOURCES>
*** web.xml:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"file:/C:/iPlanet/Servers/bin/https/dtds/web-app_2_2.dtd">
<web-app>
<resource-ref>
<description>example</description>
<res-ref-name>jdbc/POOL</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
*** sun-web.xml:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sun-web-app PUBLIC '-//Sun Microsystems, Inc.//DTD Sun ONE Web Server 6.1 Servlet 2.3//EN' 'http://www.sun.com/software/dtd/appserver/sun-web-app_2_3-1.dtd'>
<sun-web-app>
<resource-ref>
<res-ref-name>jdbc/POOL</res-ref-name>
<jndi-name>jdbc/POOL</jndi-name>
</resource-ref>
</sun-web-app>
*** Code at a servlet:
InitialContext ctx = new InitialContext();
listContext((Context) ctx, "");
     * Recursively exhaust the JNDI tree
     private static final void listContext(Context ctx, String ruta)
          try
               NamingEnumeration listanombresjndi = ctx.listBindings("");
               while (listanombresjndi.hasMore())
                    Binding item = (Binding) listanombresjndi.next();
                    String className = item.getClassName();
                    String name = item.getName();
                    System.err.println(ruta + className + " " + name);
                    Object o = item.getObject();
                    if (o instanceof javax.naming.Context)
                         listContext((Context) o, ruta + " ");
          catch (NamingException ex)
               System.err.println("JNDI failure: " + ex);
               ex.printStackTrace();
     }

Hi,
with these instructions work properly, why?
On a Sun Web Server SP11 windows is not necessary to realize that, and it works correctly without these indications
is a bug?
Thanks in advance
CesarJorge

Windows 7 Pro Client loses connectivity to internal Win2k8 web server

1. affected workstation are Optiplex 380 running Win 7 pro sp1 with broadcom NICs.
2. Internal users use a internal webserver for customer invoicing application. Users lose connectivity to this internal web server, all other networking works, network shares, internet, etc. If I try to ping the webserver IP I get no reply. XP
machines are not affected. Not a DHCP issue as there are plenty of IPs.
3. I have tried different internal NICs (3com) but still had issue. I have upgraded BIOS, nic drivers. etc.
4. I rebuilt one of the machines using Windows XP pro sp3 and have had no issue with that workstation.
the problem started a few months or so ago. I have not been able to determine the source. I tried running wireshark but nothing stuck out. I have changed the session settings on the IIS server from 15 minutes to 6 hours but did not make a difference.
5. Today when client lost connectivity to the server I tried pinging from the server back to the client and the connection was restored. This issue really has me confused as I cannot find anything in the logs that sticks out.

Hello,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.

Certificate request not working with web server v2 template on windows 2012 R2

I have tried to generate a certificate request on my domain joined Windows 2012 R2. I have tried both online and offline requests. I am using the web server v2 template.
Both Method fails with error message that the cryptographic algorithm is unknown. I am using these settings apart from the template:
This is the error Message in online request:
The error Message in the offline request is somewhat similar.
An event error is also appearing in the application log:
The CSPs from the template:
I am wondering if a cryptographic service provider or several of them are missing? They are installed With Windows update are they not? The strange thing is that this supposedly have worked before with another user. Could it be that I do not have the
correct permissions to request a certificate with this template, or has something happened with the server?

Hey dag
Thanks for posting ,
If You try duplicate the web template for using it in version 4 - can You see any difference?
Also check the link below for certificate templates versions:
http://social.technet.microsoft.com/wiki/contents/articles/13303.windows-server-2012-certificate-template-versions-and-options.aspx#Version_4_Certificate_Templates
In previous operating system versions the configuration of CSPs and KSPs were on different tabs in the certificate properties. For version 2 certificate templates, CSPs were configured on the Request Handling tab. For version 3 certificate templates,
KSPs were configured on the Cryptography tab. Starting in Windows Server 2012, the configuration of the providers is consolidated on the Cryptography tab. To learn more about the cryptographic provider options present in previous operating systems
Notice later.
I'd be glad to answer any question

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

Oracle EBS R12 intalltion on Windows Web Server 2008 R2

hi ,
Am planning to install intially oracle EBS R12 in windows web server 2008 R2.
Is this OS supported by oracle? Did anybody already done this ?
also later am planning to install OBIA + OBIEE stack on this. will all these
supported on windows web server 2008 R2?
Please provide your suggestions.
which windows version is stable to have EBS R12 + OBIA + OBIEE.
thanks

Hi Srini;
Duplicate post - Oracle EBS R12 intalltion on Windows Web Server 2008 R2
Dont you have admin right? You could delete duplicate which pretend to open same question more than one place and also it could hold clear to open question interface on main related forum part
Regard
Helios

Admin Commands issue on Windows Web Server 2008 R2 - 64Bit

Hi,
I have tried exactly same process on FMS3.5 Installed on Centos and it worked perfectly.
But not working in case of Windows Web Server 2008 R2 - 64Bit.
Here is what i am trying to do -
Basically i want to extract live streams list and display them in HTML as ordered list on another server them FMS.
What i did in the case of FMS on Centos server -
I installed Apache and PHP on this server and created a PHP file with following text in it. -
abc.php
   $xml = simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement', LIBXML_NOCDATA);
foreach($xml->children() as $child)
   foreach($child->children() as $child2)
          echo $child2 . ",";
and in hosting server where i want to display the list i entered following code in PHP file -
$homepage = file_get_contents('http://<fms-server-ip>/abc.php');
echo $homepage;
i got comma seperated values easily and everything is loading fast without any issue.
Now problem occured with Windows Web Server 2008 R2 - 64Bit.
I installed FMS, Apache and PHP in this server also, did evrything in the same way like in centos.
FMS, APache and PHP files are working fine in this.
But only problem occured when in abc.php i use
$xml = simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement', LIBXML_NOCDATA);
After this file do not loads and takes longer time to load and after some time a blank page appears. It works fine with a local XML file.
i am able to see the XML file by opening it directly in browser, but somehow this is not working with   simplexml_load_file. I dont think this is PHP issue because with local XML file it works fine. May be some port issue or something else. But i am able to view XML file directly in browser from another computers as well.
Kindly help, is there some other configurations should be changed in case of windows version. I have allowed admin commands as usual before doing all this. Ports 1111,80,1935 are also opened.
Please guide

Hi,
Yes in Browser, the response is perfect. The only issue is in Calling inside in any file, i even tried Javascript's XML dom to load it, but same result, the file is just loading and never loads completely. I also tried using an SWF file with AS3 code to load XML inside as3 and send the result to any JS function.
The output comes using trace in as3, but when it comes to browser, the same loading happends and result never loads.

Crystal Reports on Windows Web Server 2008 R2

Hello!
I use Crystal Reports for Visual Studio 2010. I have developed a web project/app in .NET 4.
What exactly should install on the server side (Windows 2008 R2 WEB) for the reports to work? At the moment I'm getting the following error: "Could not load file or assembly 'CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified."
Thx,
M

You will need the runtime:
MSM:     http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
MSI 32 bit:     http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
MSI 64 bit:     http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0.zip
Ludek

Use Imac as Web Server in A Windows Environment

I would like to use an Imac to host some sites over my companies intranet. My question is how can it be done. I dont need the mac to file share or anything like that, just run as a ftp and web server. Any suggestions?

Any reason why, assuming you have Windows 2000/2003 Server?
At any rate, this subject doesn't have anything to do with Windows Compatibility as there isn't any compatibility issue here.
Just turn on the Web Serving option in the Sharing control panel and Apache will start up.

Web Server on Windows XP?

Similar Messages

Maybe you are looking for