Web Services - Uploading Related Accounts

Hi,
I'm having a few problems uploading Related Accounts through web services. I'm using the AccountInsertOrUpdate method on the Account service from a .NET client (this is something that worked in earlier versions of Siebel OnDemand). The exception I get back is:
"Cannot perform NewRecord on the business component 'VONDMED Account Relationship'(SBL-EAI-04421)"
I've looked around in other forums / support web for Siebel Enterprise, and the consensus for this type of error message is that this is to do with the configuration of the EAI components Siebel side.
Soap Trace:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<AccountWS_AccountInsertOrUpdate_Input xmlns="urn:crmondemand/ws/account/10/2004">
<ListOfAccount xmlns="urn:/crmondemand/xml/account">
<Account>
<AccountId>ABHA-OWJ5Z</AccountId>
<ExternalSystemId>L33346</ExternalSystemId>
<ListOfRelatedAccount>
<RelatedAccount>
<RelatedAccountExternalId>D16726</RelatedAccountExternalId>
<RelationshipStatus>Active</RelationshipStatus>
<ReverseRelationshipRole>Parent Organisation</ReverseRelationshipRole>
<RelationshipRole>Department to Hospital</RelationshipRole>
<StartDate>10/18/2007</StartDate>
</RelatedAccount>
</ListOfRelatedAccount>
</Account>
</ListOfAccount>
</AccountWS_AccountInsertOrUpdate_Input>
</soap:Body>
</soap:Envelope>
Has anyone else run into this type of issue?

Hi, I've seen this error on other projects I've worked on. This typically has to do with permission. Make sure that your role has permissions to create these records. If you know he AccountId you do not need to provide the ExternalSystemId in the SOAP request.
- Bardo

Similar Messages

MBAM 2.5 Web Applications installation - "Web service application pool account is not valid"

Hi,
I've created a Server 2012R2 installation to install MBAM 2.5. When installing the Web Applications I keep getting "The web service application pool account is not valid".
The account I am using is a standard domain account with admin rights on the Server and I've also set the SPN (both netbios and FQDN) and Delegation.
This account is also a member of the group that is defined as RW of the SQL databases (which were setup without any problem and are on a separate Server 2008R2, SQL 2008R2 installation.
I am also getting an error with the SSRS URL , stating "SQL Server Reporting Services URL that points to the MBAM reports is not valid", despite being able to browse to the http://[FQDN]/ReportServer_MBAM location.
Thanks.

I got this kind of error when I revert back my virtual machine a lot to my previous checkpoints. I hope this can't be an issue for you.
Make sure the application pool account must have the following login roles on the SQL server and have following rights on the reporting instance:-
Required SQL Server permissions
The user responsible for installing MBAM database and reporting feature must have the local administrator privileges and the following log in permission:-
SQL Server instance login server roles:
dbcreator
processadmin
SQL Server Reporting Services instance rights:
Create Folder
Publish Reports
SQL Server Database Engine Services: SQL Server Database Engine Services must be installed and running during MBAM Server installation.
SQL Server Reporting Services (SSRS): SSRS must be installed and running during the MBAM Server installation. Configure SSRS in "native" mode and not in "SharePoint" mode.
Gaurav Ranjan

Integration Event Web Service Upload Trigger

Hello,
have a question about the Integration Event Web Service.
Is it possible to get Data in the Integration queue, if i make an upload? We made the experience that workflows don't trigger with uploads.
Regards,

I'm sorry, I'm not clear on what method you are using for "upload" is this a WS insert request or are you using import to add new records to CRMOD? Also, what object(s) are you working with (i.e. Account)

WEB Service Upload File

Dear all,
I have some files (50 files).
if web service have a service flollowing:
upload (String fileName,byte[] content);
But if file more than 10M, how to upload to web service.
Please show me a solution to upload 50 files or more with web service.
Thank and regards.

It looks like you just invoke that method with an array of bytes. If you have 50 files, do it 50 times (say, in a loop). You can get the array of bytes with a FileInputStream and a ByteArrayOutputStream, but I'll bet something in the java.nio package can do it more smoothly. (Check the docs; your googling will be as good as mine for that part.)
The details will depend a lot on the web service itself; for that, talk to the provider of the service.

Web Services Upload Document

I'm having trouble getting an upload URL for an AddCourse call. It says to make the call:
https://deimos.apple.com/WebObjects/Core.woa/API/GetUploadURL/valenciacc.edu.127 9686253
Additionally, valenciacc.edu.1279686253 is the iTunes U identifier for the tab. Where can I find this identifier? I'm trying to add some courses under a certain section.
Thanks,
Doug Johnson
Valencia Community College

I am having the identical problem as Mazhar.
I however, have not been able to upload an xml file like him.
I am getting an HttpStatus code 403 Forbidden.
I am using jakartas HttpClient and/or curl.
My tokens work to get showTree responses just fine, so I don't have any reason to suspect my credentials string.
Here is the url I am sending using a get method:
https://deimos.apple.com/WebObjects/Core.woa/API/GetUploadURL/myschool.edu.13249 41395.01324941402?credentials=Administrator%40urn%3Amace%3Aitunesu.com%3Asites%3 Amyschool.edu&identity=%22joebloe%22%3Cjoe.blow%40myschool.edu%3E+%28joeblow%29%5B23413%5D&time=1181696654&signature=4a10e710f123dde248f2bac1684171601d973d564b 2d6696314d1d5c3b5cd319
Scratching my head... Mazhar, have you figured it out yet?
Any help, well, mui appreciado.

Web Service 2.0 Query Account Problem

I've got a web service to query Account IDs from CRMOD using the External System ID field value - I've been using the Web Service 1.0 WSDL, but now changing to the Web Service 2.0 WSDL. With the newest WSDL and modified code, I cannot get an Account Query to correctly return the Account ID. Below is the VB code I am using - similar to the 1.0 code I was using - passing the ExternalSystemId value in which I have verified is correct and an empty value for ID, but it never returns any data. I also tried sending an empty value for Name and Location instead of ID, but it still never returns any data.
Dim qryIn As New AccountQueryPage_Input
qryIn.ListOfAccount = New ListOfAccountQuery
qryIn.ListOfAccount.Account = New AccountQuery
qryIn.ListOfAccount.Account.ExternalSystemId = New queryType
qryIn.ListOfAccount.Account.ExternalSystemId.Value = "='XXX123yyy'"
qryIn.ListOfAccount.Account.Id = New queryType
qryIn.ListOfAccount.Account.Id.Value = ""
Dim qryOut As AccountQueryPage_Output
qryOut = accntPrxyAcct.AccountQueryPage(qryIn)
Any ideas on how this call to the AccountQuery is incorrect?

Thanks for the reply Mark.
I did verify the External ID by plugging it into a filter on a report and the correct account was returned.
Code before was just the creation of the proxy:
Dim accntPrxyAcct As New WSOD_CVW_Account.Account
accntPrxyAcct.Url = objSession.GetURL()
Code after:
It should take the AccountID from the query out object and it places it into another webservice call to create a task associated with that account. That web service call is working and is also Web Service 2.0. It uses the same objSession variable - so the session seems to be valid.

How to create Web Service based on PI WSDL message

Hi all,
we have following scenario:
Within PI (version 7.1) we set up a message type and inbound service interface. This service interface should send the PI message to a web service running on a SAP J2EE (version 7.01). As the PI message is sent as WSDL I thought it should be easy to build a web service on the SAP J2EE based on this WSDL from PI.
Unfortunately, I have problems creating the Web Service.
For my current project we integrated the NWDI to the SAP NetWeaver Developer Studio and I'm required to add the Web Service to an existing DC (Development Component) within the NWDI.
What I tried so far is:
- I created a Deployable Proxy Project and within this I created a Client Proxy Definition based on the WSDL from the PI. But I can't add this Proxy to the DCs of the NWDI and I don't know how to implement my own coding here in order execute specific functions.
- I created a new class within the NWDI DC and a public method. Based on this I created a Virtual Interface and a Web Service Definition (WSD). Then I added this to a Web Service Deployment Descriptor. I uploaded this to the SAP J2EE. But I'm not able to access this and I don't know hoe to assign the WSDL here.
I also tried here to create a client proxy based on this WSD as I thought I might assign the WSDL here. But I don't see the WSD in the list of Web Services uploaded to the SAP J2EE...
Can you please advice me how to create a Web Service in such an environment?
regards
René Jurmann

Hi Tahir,
sorry that you needed to wait this long - but this is how I created the web service:
The steps on how to create the web service in NetWeaver Developer studio are nearly the same as described in the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5838. [original link is broken] [original link is broken] [original link is broken]
Some steps I just skipped and some others I added. Some of the steps I did the way I described it as I needed to connect the web service with the SAP PI.
Prerequisites:
Add Java Perspective and J2EE Development Perspective to the open perspectives.
Within "Window - Preferences - Web Services" check "Soap extensions visible in the virtual interface editor"
The SDM of the corresponding SAP J2EE is configured within "Window - Preferences"
Create a Development Component (DC) with type "J2EE -> EJB Module"
The business logic of the web service will be implemented in an Enterprise Java Bean (EJB). So first the EJB component must be created:
     Choose "File -> New -> Other"
     In opening PopUp choose "Development Component -> Development Component Project"
     Select the Software Component for which you want to add the DC (e.g. "Local Development -> MyComponents")
     Choose now vendor, name and type:
          vendor is an alpha-numeric string of 20 characters starting with a letter - all in lower case
          name is an alpha-numeric string starting with a letter - all in lower case
          vendor and name concatenated must not be longer then 40 characters
          the name can be separated into different part using "/" as separator
          each part of the name must not be longer than 8 characters
          the type is "J2EE - EJB Module"
          you can specify a Caption as general description for the web service
Create new EJB
To create the EJB itself:
     In J2EE DC Explorer of J2EE Development Perspective expand new DC and right-click on folder "ejbModule"
     Choose "New - EJB" with following details:
          EJB Name: <name as for PI service Interface to be created - starting in upper case>
          EJB Project: <pre selected>
          Bean Type: Stateless Session Bean
          Default EJB Package: <corresponds to namespace in PI>
          generate default interfaces: Checked
Regarding the "Default EJB Package" this should be created according the namespace in PI for which all PI objects will be created. This only applies if you have some naming conventions here.
Example:
Namespace in PI is: http://company.net/pi/SOFTWARE_COMP/Application
The corresponding package then is: net.company.pi.software_comp.application
Implement coding for web service
As the web service will be called via PI some transfer variables will be submitted. Most likely, those variables will not be standard type (e.g. String) but a complex type. Those types must be generated as Java classes. Below an example of a complex type I needed:
Data Type
net.company.pi.software_comp.application.types.MessageProcessingInformation
Structure:
     Element name          Element type
     sendingSystemID          String
     interfaceID               String
     businessProcessVariantCode     String
     testIndicator               Boolean
For every element described a public "get", "set" and "has" method must be created in the corresponding Java class:
package net.company.pi.software_comp.application.types;
import java.io.Serializable;
public class MessageProcessingInformation implements Serializable {
     protected String sendingSystemID;
     protected String interfaceID;
     protected String businessProcessVariantCode;
     protected Boolean testIndicator;
     public String getSendingSystemID() {
          return sendingSystemID;
     public void setSendingSystemID(String value) {
          this.sendingSystemID = value;
     public boolean hasSendingSystemID() {
          if(sendingSystemID != null && !sendingSystemID.equals("")){
               return true;
          return false;
All Java classes representing complex types and all classes referenced here (used for sub-types) must implement java.io.Serializable. Java standard types which do not implement this class must not be used as sub-types.
As soon as all data types are declared the real business logic can be implemented:
     In J2EE DC Explorer of J2EE Development Perspective expand DC - "ejb-jar.xml" - <Name> and double click on "ejbCreate"
     In detail view select folder "Business Methods" and click "Add"
     choose name of business method - this should be the same as the PI message type used for the service interface - starting lower case
     return type should be "void"
     add needed parameters fully qualified - including package (as specified in PI and created previously in DC)
     you can mark certain parameters as array if necessary
Remark:
It might be that after saving you get an error. This might be as the package name of one component is copied to the corresponding Java class at the very beginning (before the package declaration within the Java class). Simply delete the string here.
It also might be, that the new business method is only defined in the remote interface class but not in the bean class. Just create an according method in the bean class.
Within the newly created business method within the bean class you can now implement the business logic.
Create a DC with type "J2EE -> Enterprise Application"
In order to create the "real" web service and deploy it to the J2EE an Enterprise Application project has to be created. So create a new DC as for the EJB Module but choose as type "J2EE -> Enterprise Application".
After the DC is created right click on the EJB DC and choose "Add to EAR Project". Choose the new DC.
Create web service for EJB
As soon as you implemented the business logic you can create the "real" web service. Therefore:
     Right click on the EJB name below "ejb-jar.xml"
     Choose "New - Web Service"
     Choose proper "Web Service Name" and "Configuration Name" (probably oriented at the EJB name)
     Copy the URL of the web service - you'll need it later for PI configuration
     on the second next screen use the same name for "Virtual Interface" and "Web Service Definition" (the name should be the name of the "Endpoint")
     the "EAR Project" should be preselected
Unfortunately, the web service can't be used in its current configuration to be accessed by PI. Therefore the Virtual Interface must be changed. To do so, expand folder "Virtual Interfaces" and double click the virtual interface created.
Within the detail view expand in tabs "Mapping" and "Types" the complete folder structure. For any "SOAP Extension" where a namespace can be defined use as namespace the corresponding namespace in PI (e.g. http://corpintra.net/pi/CBFC_GLOBAL_SAP_APPL/BillerDirect) but do not change any "Soap Extension" of a standard Java type. (if you don't have any naming convetions for namespaces in PI you can leave the SOAP Extension here. But then the namespace in PI should be set accordingly.)
Probably it can be necessary on top level "Soap Extensions" in tab "Mapping" to leave "Use Namespaces for Parameters" unchecked. For some of my web services this parameter must be checked for others not - just try.
If you can define a "New Name", "Local Name" or "Item Label" for a Soap Extension then use a name with starting upper case letter. (For Java Naming conventions most of the data type names will start with lower case letters.) Especially the method name must be renamed this way in order to stick to the PI namings.
As a last point to change here check in tab "Mapping" all "Incoming Parameters" which you specified as array. Use for those as "New Name" a different name - do not just simply change from lower case to upper case. This is necessary as on PI we need to create two levels although here only one is specified.
For any own sub-type declared as array the name within the coding should also differ from the corresponding Java Class name the type refers to.
If all this is done you can deploy the web service to the J2EE:
     right click on "Enterprise Application" DC and choose "Development Component - Build..." and build all corresponding components
     right click on "Enterprise Application" DC and choose "Development Component - Deploy"
Test the new web service via <J2EE URL>/wsnavigator/enterwsdl.html
Create PI interface
After the web service is created successfully the PI integration can be started.
Therefore, within the Enterprise Services Builder create a data type according to the web service definition. All components defined on top-level for this data type should be declared as incoming parameter for the web service business method. Therefore it could be necessary to create some sub data types on PI first and add those to the "master" data type.
Ensure that the names of the components correspond to the names defined in the web service (see virtual interface here). Those names must exactly be the same - including lower/upper case. Also take care for the ordering of the components.
In case you need to include arrays following applies:
The upper level is of occurrence "1:1". This has only one sub-entry with occurrence "1:n". The names for upper and sub-level must not equal.
Based on the data type a message type is created. The name of the message type must be exactly the same as the name of the web service business method. (Hint: the name of the web service business method was most likely changed in the virtual interface. Then this name must correspond to the message type name.) Based on the message type an asynchronous inbound interface is to be created (which will be referred in the Integration Directory). The operation name for this interface (left panel) should be the same as the name for the web service business method.
Create PI mappings and routings
How to map (message mapping and operation mapping) from source to the web service message I wont explain here as this depends on the source message. The only important things here are:
     When creating the SOAP communication channel within the Integration Builder the "Target URL" is:
          <J2EE URL>/<Access URL as specified in web service creation>?wsdl&style=document
     The soap action is the name of the web service business method.
     Most likely the web service needs authentication to be executed.

Questions about SPML Web Service ( OIM 9.1 )

I need to launch a provisioning process on a target by using a generic connector (Web Service).
Scenario:
==========
Host A is where the OIM server is installed. A generic connector is defined here.
Host B is the target where users must be created. A webservice (axis) is installed here.
Requirements:
===========
OIM server (Host A) sends a request to WebService (Host B). The Web service receives, process and sends a response with the result to the OIM server.
Version 9.0.3
==============
On Version 9.0.3 I got the expected results but a problem appeared: there wasn't feedback error control because the web service response could'nt be processed.
I followed the next steps:
1º deploy axis on application server
2º write SendWSResponse.jws including public method "doProvisioning". Copy this file to ..\server\default\deploy\axis.war\
3º compile SendWSResponse.jws (from a browser)
4º Create generic connector (for reconciliation and provisioning). Definition of parameters and mappings.
Note: In 9.0.3 version only three parameters were required for Web Service Definition:
Web Service URL=http://host:8080/axis/SendWSResponse.jws
Operation Name = doProvisioning
SPML-->Target ID=4201
Version 9.1
==============
On the new version, the connector definition is more complicated. Also they have added an ear-application or web service (OIMSpmlWS) related to this connector .
The first question is:
Is this ear-application addressed to process the reponses that are sent by the target?
The second question is:
Must I install the OIMSpmlWS on Host B? and if the answer is affirmative, how can I include the logic to my provisioning process.
And the most important?
How might the connector be configured and the webServices in this usual scenario?
Many thanks in advance

There is no "sample" WSDL file, there is THE WSDL file. It is located in the OIMSpmlWS.ear EAR file, in spmlws.war WAR file in the directory WEB-INF/wsdl.

Multiple Web Services in one Jdeveloper project

Hi all,
I'm currently trying to implement a series of web services, all relating to one application. I'm using the top-down approach, where I generate the web service from a WSDL file, and add my implementation to the generated classes. The WSDL file imports all sorts of XML Schemas (xsd-files) and Jdeveloper correctly generates all the necessary java-classes for me. Lets call the first web service I create WS-1.
This all works fine and I'm a happy panda. I can call the web service, it works, I can modif the wsdl and regenerate the web service to e.g. change the input etc. All this works.
Just until the point where I want to create a second web service (lets call this WS-2). This new web service doesn't use all the XML Schemas that the first web service does, it is more simple with regards to in-/output. The problem arises when I modify WS-2 and Jdeveloper regenerates the Web service files (.java and the files in the WEB-INF/wsdl-directory). When I do this, it deletes the imported xsd-files that WS-1 uses (removes them from WEB-INF/wsdl).
And when I regenerate WS-1 to get my xsd-files in again, then when I regenerate WS-2 it imports all the unnecessary xsd-files into the wsdl for WS-2.
Something tells me, that there is a connection or shared library between all web services in one Jdeveloper project. That they all imports and uses the xsd-files in WEB-INF/wsdl.
Is this true? Can't I have multiple web services (and wsdl-files) using different types (schema definitions) in the the same Jdeveloper project?
One solution I can think of, is to have all my web services in different projects under the same application. But is this really necessary?
I'm using Jdeveloper 10.1.3.3.0.

Hi,
pure from a coder instinct I think I would prefer them to be in separate projects for better reuse and clean separation. If I need project 1 to access aclass from Project 2, I can check the dependency check box in the project properties. Is there any business requirement that makes you think having all of these in a single project will help ?
Frank
Btw.: I agree that JDeveloper shouldn't constraint developers from doing what they want and if this is a limitation the feel free to file a bug

How to trigger an event web service when a mail received in Exchange Server ?

Hi,
I have a requirement of Triggering the event in Web-service with related data (Mail Details) whenever mail received in Exchange Server..
I have done R&D on this, but I couldn't find answer.
Is there any possibility of triggering the service ? If Yes, how can I achieve this?
Thanks in Advance.

Hi Jason,
Using above link, I am getting notifications only for the logged in user
service.Credentials = new NetworkCredential(EmailAddress,Password,domain);
I want a way to get the notification or callback when a email comes from any user to the server. I tried as above , but i could get the notifications for a logged in user with his credentials.
Please help me to find out a way to get the notifications from the server irrespective of the user login.

Use of &, or in web services

We are using web services to interface accounts, opportunities, etc to our legacy applications.
I wanted to confirm, do I need to do anything special if my in house legacy application has a company with the name "A & B Inc", "Alpha > Bravo Co", etc and I want to pass these values to CRM via web services?
My concern are the typical characters that one would find in a XML document as delimiters.

You can't send the special charater as it is, replce them with their equivalent notation
"&" with "&"
"<" with "<"
">" with ">"
"\"" with """
"'" with "'" etc
Dinesh
CRMIT

Web Services are protocols independent?

Hi Guys,
I want to know that Web Services are protocol independent? if yes, can i develop a web service in other protocols excepts HTTP and SOAP. Please describe in details.

Hello,
I will say it depends how you are qualifying Web Services and related technologies.
Historically, Web services have been build to use protocol and technologies that will work using Internet technologies and be compliant with Firewall and other internet layers...
So the network protocols were HTTP/HTTPS.Also, because the service has to be decoupled from the implementation, so we use XML and data representation using Schemas, all define in a wire protocol SOAP.
So initially Web Services are based on SOAP over HTTP/HTTPS, and the description of the services, the different message types is done in the WSDL, that is itself an XML document. Since the message is an XML document, it is possible to send it using any protocol, the idea being you send the SOAP request to a server the server deal with it and send a response all using SOAP representation. This is why for example in the Oracle Web Service stack in addition to HTTP/HTTPS, you can use JMS as the communication protocol.
But I also want to add some information about WSIF (Web Services Invocation Framework), where in addition to SOAP, you can use "native" layer to call a Web Service. The idea being that for example if you are building a service where the clients are either hosted on the same server as the service, or remote and outside the firewall... You want in this case to be able to call your java implementation class from the container when you are local, and when a customer wants to call the service from the internet uses the SOAP/HTTP protocol. To learn more about WSIF take a look to this OTN Article: Web ServicesAnyhow, Anywhere
So as you can see Web Services are protocol intependent.
Regards
[urlhttp://blog.grallandco.com]Tugdual Grall

Slow attachment upload with Exchange Web Services (Outlook 2011 for Mac?)

We're experiencing slow attachment upload with Exchange Web Services versus MAPI, OWA, and Outlook Anywhere. I'm not totally certain that it is Exchange Web Services or specifically Outlook 2011 for Mac. I attempted to test with the Mac Mail
App, but it makes it difficult to tell when the attachment has been uploaded and the file has been sent. Here's what we're seeing (10mb file):
MAPI / RPC/HTTPS / OWA: 10-15 seconds upload time
Exchange Web Services (Outlook 2011 for Mac): 60-90 seconds upload time
Thoughts? Any idea why we would see such a drastic difference in attachment upload time? Any way to prove definitively that it is Exchange Web Services vs. Outlook 2011 for Mac? We've tried it from multiple locations with multiple different machines,
and although the upload times vary (some locations have more bandwidth etc) the ratios remain similar.

Hi ,
Does all the user occurred the issue ?
If only special user, I recommend you do the following steps and test:
1.Remove and re-add the email account and check if this helps to resolve the issue.
To remove and add the email accounts:
Open Outlook > GO to Tools > Accounts > Click on "Minus" symbol to remove and "Plus" to add an Email account.
2.Creating a new user profile:
http://support.microsoft.com/kb/2439218/
3. If the issue persists, rebuild the data base and check the results:
http://support.microsoft.com/kb/2360509
You can also post it on Office for MAC forum to get special support about the difference between Outlook and Outlook for MAC.
http://www.microsoft.com/mac/support
Wendy Liu
TechNet Community Support

My mom helped me to create my iTunes account and load it with a 50$ gift card and now I wanted to purchase a one month subscription at the AYI dating web service but apple never let them take money from my account and I was declined,don't know why?

My mom helped me to create my iTunes account and load it with a 50$ gift card and now I wanted to purchase a one month subscription at the AYI dating web service but apple never let them take money from my account and I was declined,don't know why?

You have posted to the iTunes Match forum, which your question is not related to. I suggest you contact the web site from whom you wish to purchase the subscription.

Problem with uploading files to SharePoint 2013 in cloud using web services. Keep getting error message and don't know why.

Hello everyone. I am having trouble writing a utility that uses SharePoint web services to upload a file and metatag it. It keeps throwing the following error message:
"The request failed with the error message: -- <html><head><title>Object moved</title></head><body> <h2>Object moved to <a href="/_forms/default.aspx?ReturnUrl=%2fsites%2fgk%2f_vti_bin%2fcopy.asmx">here</a>.</h2>
</body></html> --."
Not sure why. I pass the file that I am going to upload to the subroutine and it is suppose to upload it to the appropriate library. I have burned several days on this problem and I am not sure what is going on. I would appreciate anyone that can point me in
the right direction. Below is the subroutine that I have that is causing the problem. Obviously, I have stripped the name from the example.
Thanks
Mike
******** <Begin snip of code> **********************
Public Shared Sub CreateNewDocumentWithCopyService(ByVal fileName As String)
Dim c As New copyservice.Copy
c.PreAuthenticate = True
c.Credentials = New System.Net.NetworkCredential("[email protected]", "mypassword")
c.Url = "https://x.sharepoint.com/sites/gk/_vti_bin/copy.asmx"
Dim myBinary As Byte() = System.IO.File.ReadAllBytes(fileName)
Dim destination As String = "https://x.sharepoint.com/sites/gk/Gatekeeper%20Reference/" & System.IO.Path.GetFileName(fileName)
Dim destinationUrl As String() = {destination}
Dim info1 As New copyservice.FieldInformation
info1.DisplayName = "Title"
info1.InternalName = "Title"
info1.Type = copyservice.FieldType.Text
info1.Value = "new title"
Dim info2 As New copyservice.FieldInformation
info2.DisplayName = "Modified By"
info2.InternalName = "Editor"
info2.Type = copyservice.FieldType.User
info2.Value = "-1;#servername\\testmoss"
Dim info As copyservice.FieldInformation() = {info1, info2}
Dim resultTest As New copyservice.CopyResult
Dim result As copyservice.CopyResult() = {resultTest}
Try
' When creating new content use the same URL in the SourceURI as in the Destination URL argument
c.CopyIntoItems(destination, destinationUrl, info, myBinary, result)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
******** <End snip of code> **********************

Hi,
If you want to upload a file to a library in SharePoint 2013 online, I suggest you use Client Object Model or REST API.
The code snippets in the two threads below will be helpful:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/deac7cb7-c677-47b0-acdc-c56b32dfaac8/uploading-bigger-files-using-csom
http://stackoverflow.com/questions/17057074/how-to-download-upload-files-from-to-sharepoint-2013-using-csom
Uploading Files Using the REST API
http://blogs.msdn.com/b/uksharepoint/archive/2013/04/20/uploading-files-using-the-rest-api-and-client-side-techniques.aspx
You can handle the authentication with
SharePointOnlineCredentials object:
http://www.vrdmn.com/2013/01/authenticating-net-client-object-model.html
Best regards
Patrick Liang
TechNet Community Support

Web Services - Uploading Related Accounts

Similar Messages

Maybe you are looking for