Web Template updated but not reflect to old BEX portofolio or My Portofolio

Hi Expert,
We just change height of filter pane window from 50 pixel to 350pixel in the webtemplate. We did it as after SP upgraded the filter pane become smaller (only show 2 rows) then previous. After the changes, it become bigger now.
Some portofolio created when the condition of filter pane window was small.
Our issue is although filter pane already show bigger now, but when we open portofolio was created with small filter pane, it still show us with small pane.
is there any idea how to generate portofolio so that the filter pane will follow updated setting?
Many thanks in advance
Cheers,
Riny Muliawan

Similar Messages

Update is not reflecting in destination database using streams please help

We have two database (oracle9) DB1(src) and db2(dest) in windows 2000(prof) platform
1. The insert,Delete are working fine, when ever changes are made to the source it gets reflected in destination, but in case of update statement.only the source gets updated but not the destination.
Any suggestions..pls help?

As u are using oracle streams can u suggest me configuration for same.
I configured source instance as given below but i am getting error ora-4031(unable to allocate <> bytes of memory)
     Database Mode = archive
               Share_pool_size=52m &
               share_pool_reseved_size= 5m (10% of share pool Area)
               processes=500
               parallel_max_servers=35
               parallel_min_servers=1
               job_que_processes=1
               aq_tm_processe=1
               global_name=true
               Archive log mode =true
               log_archive_dest_1 :='location =E:\oracle\archive1 reopen=30"
               log_archive_dest_2 :='location =E:\oracle\archive2 reopen=30"
can u mail me
at [email protected]
Regards

Web template data is not showing

Hello All,
Can any one tell me what would be the reason that when i am executing the query separately it is showing the data but when I execute the web template it is not showing any data it shows as No applicable data. Please note I am using the same selection for the both execution.
Is there any setting in WAD for this kind of error?
Thanks in advance
Nitin

Hi Nitin,
The report will show as "no applicable data found" only when the report doesn't contain the data which meet our req selections.If you have any variable selection screen before executing the web report, run with out giving any selctions.If that is a mandatory variable then make them as optional and run with out giving any selections.But , If you want selected data and the report is showing no data when you give that selections means, there is no data available for that selection combinations.So, check this once.
Thanks.

Web Template URL for Web Template ZTEST could not be Generated

Hello Experts,
I have designed a Template in WAD with the name ZTEST(example) when i am trying to execute it in Browser, it is throwing an error like "Web Template URL for Web Template ZTEST could not generated". I am working on 7.0 WAD
Please suggest me if there is any settings to done.
Thanks in Advance,
Regards,
Vishnu.

Hello Mr. Wond,
Even if i am Executing using a default Template it is throwing the same error that " Web Template URL could not be generated". Meanwhile when i am working on this issue i found that some Command URLs should be defined, but i am unable to trace where to define this URL Command like <a href=u201Dhttp://myAppServer:myPort/SAP/BW/BEx?pageno=1&request_no=8&cmd=ldoc&template_id=EXAMPLE_TEMPLATEu201C></a>
Please suggest..................
Regards,
Vishnu.

Erorr " The Web template "0ANALYZER" does not exist in the master system "

Hi
i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
"The Web template "0ANALYZER" does not exist in the master system "
i activated all templates but not able to execute any report in web
i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
please do help me

For clarification:
If following happens:
> you are launching the query with URL like:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
> then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
--> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
--> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
When you problem is other nature you have to describe it in detail.
Regards, Karol

In Address Book, why does Apple let you create custom fields in the Template cards but not have them available for importing?

I open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Principal".
I also add two more custom fields in the Email area.
Quit Address Book then relaunch. Add a new contact and the new custom fields, Principal, etc. are there. All good so far.
I have a Now Contact file with about 200 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing? Does anyone have suggestions on getting around this?

While most likely not of interest to you, Spotlight can also tell you where the files it finds are located
Hover the mouse pointer over the name, and press Command-Option and the path to the file will be displayed.
As for opening a terminal session in the directory where a file is located, there is Applescripts that do just that as well as specific features in Lion/Mountain Lion terminal:
<http://stackoverflow.com/questions/420456/open-terminal-here-in-mac-os-finder>
<http://hints.macworld.com/article.php?story=20110729034827358>
<http://www.macworld.com/article/1047793/folderinterm.html>
<http://www.macworld.com/article/1161876/open_finder_folder_in_terminal.html>
<http://www.macobserver.com/tmo/article/os_x_lion_open_a_folders_location_in_term inal>

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

Did download OS X Mountain Lion and see the features in my applications, but not reflecting in my APPS purchases.

did download OS X Mountain Lion and see the features in my applications, but not reflecting in my APPS purchases.
also this takes huge amount of time, almost 10 hours to download, even using 3G Net connection.

Hi kiwirudy,
I've had the same problem more than once since I started trying to download my 14 April purchase of OS X Mountain Lion.
I found a property list called manifest.plist in my ~/Library/Application Support/AppStore folder which had a Boolean property called failed checked. I unchecked it and afterwards I was able to resume my download.
Here are some steps I've found useful:
Close the Mac App Store.
make a copy of the ~/Library/Application Support/AppStore folder. For some strange reason the Mac App Store likes to just delete it in some circumstances, which will mean that one has to start one's download again from the very beginning.
Double click on the manifest.plist in one's ~/Library/Application Support/AppStore folder.
This should open it in Property List Editor.
Expand all the nodes (holding down the alt key and clicking on the highest collapsed node should do it.
Find a key called failed of type Boolean and uncheck it.
Save the manifest.plist and close it.
Open the Mac App Store.
The red message "an error has occured" should now be gone and one should be able to resume one's download.
In the event that the ~/Library/Application Support/AppStore folder gets deleted:
start the download again (it will start from the beginning), pause it and close the Mac App Store.
copy your backup copy of the pkg file back to its sub-folder (it's a numbered folder in the ~/Library/Application Support/AppStore folder).
Open the Mac App Store and resume your download.
It should continue from where it left off.
This has worked for me so far. I'm holding my breath. Don't know if I'll still be alive when it's finished.
Regards
Nic
Message was edited by: n c h

IPhoto will not initiate. Downloaded update, but not change. Any help out there?

iPhoto will not initiate. Downloaded update, but not change. Any help out there?

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

E Recruitment -Candidate applied for job but not reflected candidate name

E Recruitment
Candidate applied for job but not reflected candidate name Recruiter Dashboard
Please any one suggests me what is problem?
Regards
Eshwar

Hello Sri,
the solution to your first question might be very easy. In EhP 4 the entries in the dashboard do not appear automatically. In most cases you have to refresh the dashboard (be aware this is only effecting the current dashboard work list, not all if you do not use the refresh all button). Soclick the "My new Applications" and then refress this workset.
If this does not help we will have to look closer into this issue (overall I assume you have EhP4 SP 6 applied).
For question 2. It is a quite common requirement that an external publication is nearly only based on the posting texts while the internal publication includes much more specific information (org. management, cost center, pay scale group). As you are free in designing you own company specific internal and external publications they can look however you want (in the general restriction what a smartform can do of course). For different publication texts companies create different postings one for internal and one for external publication. The additional information are in some cases entered directly into these texts, in some cases maintained in e-rec fields not needed for other requirements, in customer own fields or directly gathered from the HR core system. It depends a bit on the exact requirement which is the best solution. For the fields you mentioned I'd probably go for OM integration for e-rec (assigning positions to requisition) and get the Information via customer RFC function module directly in the smartform (if the security guys allow the access to the HR system from the e-rec system).
For question 3. The manager should be able to see the decision maker data overview. Here you can include whatever you want as you can replace it with a customer developed smartform.
Kind Regards
Roman

Web template "0ADHOC" does not exist in the master system error

Hi to all,
The Web template "0ADHOC" does not exist in the master system.
Error coming while executing query on web template.
Via TCODE RSCUTV27 I have checked the default web template 0ADHOC is already there for adhoc analysis.
Please can anyone tell me what the problem is?
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
                                     Template ID :
                                     Reusable Web Item ID :
                                     Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved.

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.

Hi,
In addition, please make sure that the port 443 is not blocked by the firewall.
Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
placed in front of the Web Application Proxy server.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

HT4623 i just updated my 3gs 4.3 t0 6.1 its updated but not activate plz help

i just updated my 3gs 4.3 t0 6.1 its updated but not activate plz help

Do you get an error message.
Was your phone ever locked to a different phone carrier?
When you can't activate, usually means your phone was hacked or jailbroken to unlocked it, then when you updated the IOS it locked back to the original carrier.

Got the OS 7.10.8107.79 update but not the firmwar...

Hi..
I have a small question..
I got the OS 7.10.8107.79 update but not the firmware update... my Firmware is stil 1600.2479.7740.11451 How can I get the new firmware????
Thanks in advance

@billstrom
They don't have to be scheduled to appear together!
Happy to have helped forum with a Support Ratio = 42.5

I have an IPhone operating OS 4.21. I cannot back it up before update and I cannot set up an ICloud account as it needs to be on a version later on the device. Please help, I want to update but not lose everything!

I have an IPhone operating OS 4.21. I cannot back it up before update and I cannot set up an ICloud account as it needs to be on a version later on the device. Please help, I want to update but not lose everything!

SorchaH wrote:
I receive an error "Itunes cannot back up the IPhone because the back up cannot be saved on the computer".. So I tried to download and log into ICLoud but need to do this from my device..
That would tend to indicate a permissions issues on the computer.
Running an outdated version of iTunes is of absolutely no benefit.
All iDevices work with the current version of iTunes.

Web Template updated but not reflect to old BEX portofolio or My Portofolio

Similar Messages

Maybe you are looking for