WebAgent trouble with Linux (ORA-03114)

sometimes ORA-03114 error occur , when we use webagent with apache 1.3.12.
Only Linux platform (we tested NT and SunOS with same enviroment) , this error appeared.
normaly it work well , but after long time (..10h) passed since last access, it says
Oracle interMedia Web Agent
An error occurred processing your MEDIAGET or MEDIAPUT request
Error while trying to retrieve text for error ORA-03113
therefore we can see that message every morning.I think connection timeout between WebAgentProcess to DB is matter.
i want to make it keep connection. how ?
please help
thanks, advance.
taro

this trouble related to firewall settings.
DB would connect to webagent for timeout process. firewall dropped these packets, so webagent connection was timeout.it was clearly resolved.
very thanks

Similar Messages

Trouble with listener.ora and tnsnames.ora

I can't get the listener running.
Trying to start the listener results in the following message:
LSNRCTL for MacOS X Server: Version 9.2.0.1.0 - Beta on 04-JAN-2003 23:35:28
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
I suspect i have a configuration error in listener.ora or tnsnames.ora, but I'm stumped at this point.
Can anyone help?
Much appreciated.
John freberg
TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
MacOS X Server Error: 2: No such file or directory

Assume you've got $ORACLE_HOME
We'd end run listener problems by setting/exporting TNS_ADMIN and putting tnsnames.ora and listener.ora files in a standard place ( ../dbs for our site) rather than Oracle's defaults.
We'd also found that there is a parsing problem of the tnsnames.ora file by 9.2 ( its in AIX and MAC versions at least). Placing the entire description section on a single line consistently resolved problem.
Opening a Tar on that one.
So Now we're accessing Dbs based on mac and AIX from Multiple MAC and AIX remote sites with SQLPLUS and thin clients.
JD

Troubles with TNSNAMES.ORA - with solution

Hi There
I've had the problems described and solved in other entries of the forum.
But then I ran in to a new one, the product would only read part of the file..!
I've found that the problem apparently is that if there is an entry with a host that is not available then the product stops reading the file.
I removed the entry and then it continued until the next unavailable server, which i then deleted. Finally I had a full TNS list in the product. But when the other servers becomes available again I have to add them to TNSNAMES.ORA, so I hope Oracle will fix it.
A part from that a fine product.
/regards Ole Jørgensen

Thats strange, as we do not ping every host to make sure it is available. is this a 10.2 Oracle Home?

Lenovo E530c hard disk trouble with Linux

Hi,
I've got Lenovo E530c with dual boot Windows7/Ubuntu 14.04 x64 and when i'm working on Linux hard disk becomes noisy and performance is worse 20-30% compared to windows. When i switch to windows everything is back to normal silent mode. Anyone have any idea what is the cause of this behaviour and how can I fix it?

@ All,
the official forum language is English. It is understood that for clarity a member may wish to post in another language. In such circumstances it would be appreciated if a translation be included, translate.google.com may be usefull in such circumstances.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

ORA-03114 when updating or inserting

We are testing a forms application that has been 100% generated
through Designer6, running on version 8.1.5 database.
In one screen there are several blocks linked to different base
tables. If you try and update or insert into one block, the app
crashes with the ora-03114 disconnect error. You get kicked out
of everything.
There are pre-update and pre-insert triggers on this block but
the processes called therein see to run ok. I am a bit stuck on
why this is happening..it never used to and we havent changed
the source code! All the permissions seem to be intact.
Any suggestions?

Hello,
There are some information in metalink about error linked to "_intel_fast_memcpy.A+18".
Mainly information about bugs ;)
I don't have any Windows Oracle database here, so I can't test, but, don't you have to CONVERT the database in order to switch from 32bits to 64bits? Did you check the Endianness problem against V$TRANSPORTABLE_PLATFORM or V$DB_TRANSPORTABLE_PLATFORM ?
In fact I'm not sure there's a conversion phase needed.. but the 32 to 64 bits phase might be what tricks you down.
Yoann.

ORA-03114 not connected with Oracle when I execute Query

Hi!
I have a Problem with Oracle 9 but I don't know what wrong.
When I execute this query I get an error everytime:
select * from
perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where pl.von < sysdate
and
pl.id not in
select idperleist from rechaus
where buch_schl <> 'STRN'
It's not the complete select but the point is I use
"left outer join leikat l on pl.lsnr = l.lsnr"
( not the (+) - Opoerator) and a "not in" -Clausel.
Without the "not in" -Clausel the select runs fine.
Sorry for my bad english g
Thx for help :)
Michael

Hi!
My Selection doesn't run :((
The Selection runs with (+) -Join and not with "left outer join" .
i need the "left outer join" couse the Application runs on Oracle
and Interbase with same Selections. Other Selections with "left outer Join"
are running under my Oracle 9.2 Database.
Here something I tested:
Selection runs with (+)- Join and count ():
select count(pl.id) anz
from perleist pl , leikat l
where
pl.lsnr = l.lsnr (+)
--left outer join leikat l on l.lsnr = pl.lsnr
and (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Runs without count() and with "left outer join" :
select --count(pl.id) anz
from perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Error ORA-03114 when usinf count () and
"left outer join":
select count(pl.id) anz
from perleist pl
left outer join leikat l on l.lsnr = pl.lsnr
where
(pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Selection runs without "not in"
Selection runs without count()
Selection runs with (+) and not with
"left outer join"
Thx for help :)
MD

Ora-03114 running a query with group by

Hi, I've a query with a group by on a sub-query, something like
SELECT <40+ fields>
FROM (SELECT <40+ fields>
FROM table
GROUP BY <40+ fields> I don't have any problem running this query directly via toad. This query is a cursor in a procedure in a package and, if I invoke it on the same data, the session crash "with ora-03114 not connected to oracle". If I modify the query selecting less fields, 22, I don't have any problem while with 23 the crash appears.
Furthermore, I don't have any problem in other databases with similar data.
The db version is 9.2.0.6.0 - 64bit
Any idea/advice?
Edited by: 912104 on 3-feb-2012 2.02
Edited by: 912104 on 3-feb-2012 2.03
Edited by: 912104 on 3-feb-2012 2.03

912104 wrote:
I have difficult to have more information, I can only add:
select * from v$version
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 ; Production
TNS for IBM/AIX RISC System/6000: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production Can I ask what do you think about the different behavior via toad and via package? I mean, it's possible that is a server bug?
Edited by: 912104 on 3-feb-2012 4.02Are you retrieving the entire result set via toad? or just the first few records?
Are there any TOAD non-fetched column values in your result set, i.e. CLOBS, XMLTypes, nested types?
What does your code do with the cursor? Presumably you don't loop through it and do nothing. Are you sure it's the select that's causing the error, or something you are doing with the data in the procedure?
Can you not adding some instrumentation to your code so that you know exactly what line/data values are processed at the time of the crash? Does it always crash on the same values/line or does it vary?
"Furthermore, I don't have any problem in other databases with similar data." ... what do you mean by "similar data". You only need one odd value in one column to cause you a 3114 in the right circumstances. It seems like you are long way off establishing what exactly the problem is. It's always useful not to close doors to lines of thought. You need to systematically track down the root cause of the issue by exclusion and assumptions are the enemy of that process.

ORA-03113 and ORA-03114 problems

Hi,
I'm experimenting Oracle8i. I'm installing 8.1.7 to RedHat Linux 7.0 out of box without recompiling the kernel. I set the SHMMAX to 0.5*258MB memory on the machine by echoing the number to /proc/sys/kernel/shmmax.
I checked that the system meets the requirements of Oracle's Installation Guide except SEMOPM. The RedHat Linux 7.0 sets it to 32, but Oracle requires 100.
I chose Oracle8i EE Typical Installation. The installation was ok to the point of running root.sh. Several syntax errors occur from root.sh. But they are minor syntax errors. I checked the code, regardless of errors, the scripts accomplished what it intends to do. The installation continued. I choose automatic configure Net8 when it ran Net8 Configuration Assistant and the Net8 Configuration was completed successful.
When it started Oracle Database Configuration Assistant, it created a database. But when it initialized the database, error messages ORA-03114 and ORA-03113 appeared many times. Each time, I chose to ignore. The final message was "Database creation completed with warnings."
After installation, I ran svrmgrl
$svrmgrl
SVRMGR> connect INTERNAL
Connected.
SVRMGR> startup
ORA-03113 end-of-file on communication channel
Checking the meaning of error messages, it says that if ORA-03113 occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server.
During installation, I chose Local naming method. There are following files in $ORACLE_HOME/network/admin/
listener.ora
sqlnet.ora
tnsnames.ora
shrept.lst
To my layman's eye, they looked ok. I can even telnet to the linux machine with database name, although I don't know how the machine has acquired the alias without any changes to /etc/named.conf nor any changes to any files in /var/named directory.
Please tell me what is correctly installed Net8? or what went wrong and how I should fix the problem.
Thanks,
Wayne
null

I seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null

Frm-40735 when-button-pressed trigger raised unhandled exception ora-03114

hi everybody,
i am using oracle 10g release 2 in my test server and 10g release 1 in production server with forms in 10g running through the oracle 10g application server with no problem with our production server.
but the same form when i try to use through the same application server for my
with my test database server which is oracle 10g release 2 is giving me
frm exceptions and disconnecting the session.
like i get frm-40735 when-button-pressed trigger raised unhandled exception
ora-03114. then frm-40655 sql error forced rollback;clear form and reenter transaction. then when i try to exit it shows ora-24324 service handle not initialized.
The same thing when i try with my production server i dont get any exception handle error or forced rollback error.
i am not facing any problem as such to connect to my test database(release 2)
through sql plus client or TOAD OR ENTERPRISE MANAGER THEY ARE ALL FINE. IT IS ONLY WHEN I GO THROUGH THE APPLICATION SERVER TO ACCESS MY FORMS I GET THIS ERROR. BUT MY PRODUCTION IS RUNNING THE SAME WAY WITH NO ERRORS.
any suggestions welcome as i have to bring release 2 in the production next month
thanks and regards
manish

ORA-03114 not connected to ORACLE
Cause: A call to Oracle was attempted when no connection was established. Usually this happens because a user-written program has not logged on. It may happen if communication trouble causes a disconnection. In addition, this message could occur when ALTER SYSTEM KILL SESSION or ALTER SYSTEM DISCONNECT SESSION were issued with the IMMEDIATE qualifier because, in those cases, the client's connection to the database is terminated without waiting for the client to issue a request.
Action: Try again. If the message recurs and the program is user written, check the program.
zaibi.

Ora-03114 error when using trigger on spatial field

I have a table the has a lat and long field and an geometry field. I want to place a trigger so that as the users insert lat and long into the table it also populates those values into the geometry field. I built a trigger that is supposed to do this. Upon insert I get an ora-03114 error. I can run the same piece of pl/sql as a plain update statement. How do I solve this problem.
the DB is 9.0.1.2 and is stuck thier because of some 3rd party tools.
Aaron

Hi,
ORA-03114: not connected to ORACLE
Cause: A call to Oracle was attempted when no connection was established. Usually this happens because a user-written program has not logged on. It may happen if communication trouble causes a disconnection. In addition, this message could occur when ALTER SYSTEM KILL SESSION or ALTER SYSTEM DISCONNECT SESSION were issued with the IMMEDIATE qualifier because, in those cases, the client's connection to the database is terminated without waiting for the client to issue a request.
Check your client connection settings, your driver etc.
regards, Andreas

We loose the connection to oracle (ORA-03114)

Our connection pool looses connection to oracle (ORA-03114) in a random manner.
We use jdk1.2, jdbc 8.1.6 drivers & oracle 8.0.5 db on solaris 2.6.
This problem started when we switched from jdk1.1.7, jdbc 8.0.5.2.
We also seem to have problems reading from a date column, rs.getString("DATECOLUMNNAME") has for some reason seized to work.
The application is pretty db exhausting, we use a lot of long raw fields for storing images etc.
The connection pool is a free version from Bitmechnic.
null

I really understand nothing at it. until today I just
wrote in PL\SQL and work at the sqldeveloper. now I
need to connect this database with PHP and I really
don't know where to start. I tried to read few
articles in this site and others but didn't success.
I installed WAMP server for the php,
Php 5.2.6
oracle 10g express
where and how should I start ? I would install Zend Core for Oracle, if I were you. It's a beautiful product, completely
free, that will install and configure Apache2 server, PHP 5.2.6 and OCI8 module. I am
not much good with WAMP, I am an old Unix hack, now converted to Linux.
Thank you, I hope I won't bother to much.. but I
really a beginner with this topicEveryone was a beginner once.

Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)

uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Problem with linux installation on Thinkpad T410i

Hello everyone. I have a problem with an installation of Linux (Debian). Installation ended in my Thinkpad T410i, but when you are starting, the computer constantly restarts. With windows does not happen. What's the problem?
Probe with two versions: one with and one without GUI, and always restarts during startup stage or just finish loading the operating system. If eligo Windows in GRUB, the pc works normally.
I appreciate any help you can give me.

Madhukar,
Check the below forums which also discuss about same problem like yours.
Trouble with SAP system installation GUI
error in installation of solution manager
Regards,
Debasis.

Problem Configureing Oracle10g with linux fedora core5

dear forum members,
when i try to configure oracle 10g in linux fedora core5 with the followning commnad
# /etc/init.d/oracle-xe configure
I get the follwoing error message
Starting Oracle Net Listener...Done
Configuring Database...grep: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/*.log: No such file or directory
Done
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
I also set ORACLE_HOME environment variable before the configure commnad.
yours truely
Raja C
please give me suggestion to configure the oracle10g.

I was having horrible troubles installing Oracle XE on FC5 until I realized one thing -- I had upgraded packages.
You have to do the installs just as you want them off the CDs, then install Oracle XE, then upgrade your other packages. I'm not sure which one, but one of the upgrade packages breaks the XE install.
You would also have trouble with linking ntcontab if you were doing an oracle 10gR2 install with the upgraded set. I haven't figured out why yet but I spent all weekend on it ;)

Problem in UPDATE with EXTRACTVALUE : ORA-00600

Hi all,
I have some trouble with this update query :
UPDATE enveloppe_message
   SET ems_date_modification = SYSDATE,
       ems_login_modification = 'pipo',
       ems_dn_emet = EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Sender/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"'),
       ems_dn_dest = EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Receiver/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"'),
       ems_reference_tech = EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/SenderReference', 'xmlns="urn:swift:saa:xsd:saa.2.0"')
WHERE ems_id = 1130;I get this error message :
ORA-00600: code d'erreur interne, arguments : [koklismem111: BFILE locator], [], [], [], [], [], [], [], [], [], [], []But if I do this :
SELECT EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Sender/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"') AS a,
       EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Receiver/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"') AS b,
       EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/SenderReference', 'xmlns="urn:swift:saa:xsd:saa.2.0"') AS c
FROM enveloppe_message
WHERE ems_id = 1130;It's ok and I get these datas :
a : ou=abc,ou=ghf,o=bvhdjdie,o=lkljg
b : ou=dfg,ou=fkd,o=nbjfkkdk,o=bnfjd
c : jkldfjsdlflsnvkllkfkfllcklqsjkckldand thus, this query become ok ????
UPDATE enveloppe_message
   SET ems_date_modification = SYSDATE,
       ems_login_modification = 'pipo',
       ems_dn_emet = 'ou=abc,ou=ghf,o=bvhdjdie,o=lkljg',
       ems_dn_dest = 'ou=dfg,ou=fkd,o=nbjfkkdk,o=bnfjd',
       ems_reference_tech = 'jkldfjsdlflsnvkllkfkfllcklqsjkckld'
WHERE ems_id = 1130;Does anyone have some idea ????
Thanks.

Thanks a lot Marco for the link on the FAQ.
But I don't understand how to use a non default namespace... sorry!
Finally, this query is okay :
SELECT xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Sender/DN' passing ems_xml as "p" returning content) as varchar2(4000)) AS a,
       xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Receiver/DN' passing ems_xml as "p" returning content) as varchar2(4000)) AS b,
       xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/SenderReference' passing ems_xml as "p" returning content) as varchar2(4000)) AS c
FROM enveloppe_message
WHERE ems_id = 1130;But this one, not !
UPDATE enveloppe_message
   SET ems_date_modification = SYSDATE,
       ems_login_modification = 'pipo',
       ems_dn_emet = xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Sender/DN' passing ems_xml as "p" returning content) as varchar2(4000)),
       ems_dn_dest = xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Receiver/DN' passing ems_xml as "p" returning content) as varchar2(4000)),
       ems_reference_tech = xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/SenderReference' passing ems_xml as "p" returning content) as varchar2(4000))
WHERE ems_id = 1130;I get the same error :
ORA-00600: code d'erreur interne, arguments : [koklismem2: insufficient locator len], [0], [86], [], [], [], [], [], [], [], [], []Maybe these optimizations don't solve my initial problem !?

WebAgent trouble with Linux (ORA-03114)

Similar Messages

Maybe you are looking for