WebBrowser created only is in IE10 (compatibility mode IE7) (reverted back to 10 still have problem

More info on here:
Trying to get IE to at least run a current version of IE for my web browser
Orignal thread

It seem that you need to change the mode in feature control.
"For compatibility purposes, the WebBrowser control will run in IE7 Standards Mode by default if no Feature Control Key value is defined for an application.
Check this:
http://blogs.msdn.com/b/ie/archive/2009/03/10/more-ie8-extensibility-improvements.aspx
And this document:
http://msdn.microsoft.com/en-us/library/ee330730%28VS.85%29.aspx#browser_emulation
That is what I know, hope it helps.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • WebBrowser created only is in IE11 (compatibility mode IE7)

    Hi
    I created my own web browser using VisualStudio 2013 for windows (not app just .exe) and I looked up what web browser I was using for it to work. The  website  That I went through says: MSIE11: compatibility mode MSIE7.  Sites like Touchdevelop.com
    also wants javascript.
    So My question is can I get it out of IE7 mode and or get javascript to work?
    thanks for your help

    Hi Manchester007,
    It seems that your issue still exists. Actually your issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    I consulted IE experts, they told that Internet Explorer Extension Development forum supports your issue. We suggest that you should open a new thread about your issue on this forum:
    https://social.msdn.microsoft.com/Forums/en-US/home?forum=ieextensiondevelopment because this thread here has been a long time. You will get better support in a new thread.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT5312 If I create a new Apple ID and rescue my old one will I still have all the credit I did on my previous Apple ID ?

    If I create a new Apple ID and rescue my old one will I still have all the credit I did on my previous Apple ID ?

    You will still have them on the old one i guess

  • Some online ads grayed out, can only use in dial-up mode not broadband how can I fix this problem?

    Hello,
    I have Windows 7, Internet Explorer 11, the latest version of Flash Player and I have DSL to connect to the interent.  However, when I try to look at online ads in Walgreens and Walmart I cannot get past the first page.  There is light gray over the ad and the only way I can access is to change to the dial-up mode.  Other store ads no problem Flash Player working fine.  Tried contacting stores for help their online staff said they would look into, but I received no help, this is been happening for a long time now.
    Anyone with any idea how to fix this problem I would appreciate the help.
    Thank You,
    SB

    Compatibility view:  http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    Disable Hardware Acceleration: http://forums.adobe.com/thread/891337
    Those would be the first two to try.

  • HT1040 I created a book, but in adding pages, somehow, the back cover and flap have now become pages, and there aren't and layouts now for the flap or back cover.  How can I fix this?

    I created a book in iphoto, and in the adding and deleting of pages, somehow the back flap and back cover are now showing as a page layout, and there isn't a back flap/cover anymore, and I can't seem to add it.  I have spend hours on this project, is there a way to fix this without having to start all over?

    Try cohnfamilly's solution posted in this topic: Cover Page Disappeared: Apple Support Communities
    OT

  • Ipad suddenly runs only in a low resolution. Did an itunes restore, but still same problem.

    Ipad2 is stuck in a low resolution, icons are large, can't see normal screens. I shut down and restarted the ipad but did not help. Did an itunes Restore, but still same problem. It's like the resolution is now stuck at a high resolution. Anyone seen this problem?

    Yes, I just discovered it before getting your reply. Evidently I 3-fingered the screen without knowing it.
    I thought I had corrected my "low/high" error, but guess not. ( my first try at posting).
    Your comment is right on target.
    Thanks, problem solved.

  • CSS Float Drop in IE8 but not Compatibility Mode

    I'm testing code for my home page across different browsers, and encountered the common IE float drop problem.  This does not occur in Firefox, Chrome, Opera, or IE8 in Compatibility Mode; but does occur in IE8 standard mode.  It's a bit confusing, since I usually encounter this problem in Compatibility Mode.
    I have tried using clear:none; as I thought the content was clearing the float:left of a large flash image on the left side of the window, but it didn't solve the problem.  I have 3 image buttons whose combined heights equate that of the flash image (all 622px), and these are all in a column div floating to the right.  All of these are flush margin:0 and padding:0, border:none.  The flash image has it's own class stating margin:0, padding:0, border:none as well.  These divs are fixed pixel widths and heights.  I tried placing them in a larger container div with fixed width and height, which didn't solve the problem.  Again, this only occurs in IE8 Compatibility Mode.
    This is the code below:
    div id="container">                  
    embed src="index.swf" allowscriptaccess="always" allowfullscreen="true" height="622" width="509" align="left" class="flashhome"> /embed>                     
    div id="homecontright">           
      a href="services.html?panel=5">           
      img src="button1.gif" align="top" border="0" alt="b1" class="imageright"/> /a>                        
      a href="smt.html">          
       img src="button2.gif" align="top" border="0" alt="b2" class="imageright"/> /a>                       
       a href="jobs.html">          
       img src="button3" align="top" border="0" alt="b3" class="imageright"/> /a>        
    /div>       
      div class="floatfix"> /div>             
       div id="foot" align="center">      
       contact info footer      
       /div>             
       /div>
    Here is the style information from my separate stylesheet
    #homecontright { margin:0; padding:0; border:none; width:493px; height:622px; overflow:visible; float:right; display:block; }
    .imageright {margin-left: auto; margin-right: 0px; margin-top: 0px; margin-bottom: 0px; display: block; float: right }
    .flashhome { width:509px; height:622px; margin:0; padding:0; float:left; border:none; }
    div#container { margin-left:auto; margin-right:auto; margin-bottom:0; width:1002px; background-color:#A8CBE9; }
    div#foot {      background-color:#003366;      border-color:#a8cbe9;      border-width:thin;      border-style:solid;      font-size:10px;      width:996px;      padding:0.2em;      margin-left:auto;     margin-right:auto;      text-align:center;      font-family:Arial, Helvetica, sans-serif;      font-weight:bold;      color:#FFFFFF;      height:10px; }
    .floatfix { clear:both; }
    I've tried removing all the floats, even, especially the ones in the nested divs/class elements; but this didn't do a thing.  This leads me to wonder if this really is a float drop problem or am I missing something?
    EDIT: I fail at posting code so I've removed the front bracket from all tags.  Also, added a diagram to show what it's supposed to look like and what is happening in IE 8 Compatibility.  The margins do not exist, they are there so you can see individual elements

    I tried adjusting the images on the right -10px and had the same result.  Those images were actually created with margins within the image, so everything should be flush.
    I noticed, however, that even in browsers where everything aligns correctly, there seems to be a 2-3px jog between the flash image and the buttons on the right.  That strange link to the bottom right of the flash image is still appearing as well, somehow having to do with the top banner image when right clicked.  I tried changing the URL of that banner and the link changed as well, confirming my suspicion that they're linked.  I attempted to contain that image in a fixed width div with no results.  This link does not appear in other browsers, nor does it appear on any other pages that I used that code on.
    Code for my banner:
    <...a href="index.html"><img src="index/accuweb_c3homebannerR1a.jpg" alt="banner" border="0" class="banner"/><.../a>

  • How To turnoff compatibility mode settings in IE 10

    Hi,
    I have Domain and Forest Functional level is 2008 R2.
    I got a requirement from a project to turnoff IE10 compatibility mode for windows 7.
    Can anyone help me with an ADMS template which I can import to view settings in GPO.
    Regards,
    Deepak

    Hi Deepak,
    To turn off Compatibility View, enable the following setting:
    Computer Configuration\Administrative Templates\Windows Components\Internet Explorer\Compatibility View\Turn off Compatibility View
    Regarding ADMX files for IE 10, if we have installed it on our DC, we don’t need to download it. If not, we can visit the following website to download it.
    Administrative Templates for Windows Internet Explorer 10
    http://www.microsoft.com/en-in/download/details.aspx?id=37009
    Hope it helps.
    Best regards,
    Frank Shen

  • Is it possible to run a program in compatibility mode?

    I am running 10.7.3, and I am trying to get Mackie Tracktion 3 up and running on my Mac. I've been told tha T3 works on previous version of the Mac OS, but not the last few updates. Is there any way that I can run this program in a compatibility mode, or revert my OS to a version that supports T3? Any help would be greatly appreciated.

    Sorry, but that's most likely a problem that Mackie is going to have to help you with. Since the application launches, it's not an issue of the application being PowerPC-only, which has affected many people who've moved to Lion. Mackie's support site is very limited and uninformative, so I can't find any useful suggestions. You might have more luck in Mackie's forums:
    http://www.mackie.com/ubbthreads/ubbthreads.php/
    Good luck.

  • Force IE using Compatibility Mode

    Hi,
    I would like to force IE using compatibility mode to visit webpage. However, after I set the custom header "X-UA-Compatible: IE=EmulateIE9", it stills does not work. Only .NET project can be auto applied compatibility mode.
    Is there any setting I have missed for setting ColdFusion webpage to use compatibility mode?
    Thanks.

    Try this "X-UA-Compatible" content="IE=EmulateIE9"

  • Compatibility mode lifecycle

    Hi,
    This is the first time I use this forum, but I have searched without finding the answer to my question (I realise it is probably out there somewhere).
    I support a legacy product where early versions are not officially compatible with Server 2008 and Server 2008 R2 (not to mention Server 2012). Therefore,
    one workaround that seems to work fine is to install the product using the compatibility mode, i.e.
    before installation one right clicks install.exe/setup.exe, selects Properties and then for example Server 2003 SP2 under the Compatibility tab.
    I know this can also be done after the software has been installed, i.e. to set the program to launch in compatibility mode.
    Now to my question. Does anyone know when Microsoft will end support for Server 2003 compatibility mode? Is it the same date as when the Server 2003 support lifecycle
    ends? Also, what implication does end of support for compatibility mode have in effect? I understand the implications of end of support for an Operating System (OS), but the Server 2003 compatibility mode is used on for example a Server 2008 OS which
    will carry on being supported with security updates etc. I hope I am not sounding too confused here...
    Many thanks in advance for any answer you may be able to give!
    Best regards,
    Mattias Johansson.

    When I look on 2012 R2 the EXE compatibility mode selections go back to Windows 95 so I wouldn't be too worried about 2003. If the product has problems running then you'll likely need to get help from the vendor not Microsoft.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Can i create a new apple ID, and still have access to the purchases i made on the old one?

    I recently updated my apple ID email address, and Password to my current (newer) address. upon doing so iCloud went completely crazy, changed the timing zones on my calendars, and removed or changed data on my Mac, iPhone, and iPad.
    i have tried, in vein, to get a verification email sent to me from apple so i can get my iCloud account working again, however no such email has arrived.
    soon i will be taking my Mac to an Apple store to get the Harddrive wiped clean, as Mountain Lion has well and truly messed it up. what i am wondering is, if i where to create an entirely new apple ID, and start from scratch would i still have access to the apps and song purchases i made on the on the old account?

    Well yes, but if you want to update those apps, you'd need to sign in under your old Apple ID to update them. It's really best to just stick to one Apple ID, or you'll run into association complications down the road.

  • Is there a way to access my old Notes only? I still have my old back up but I cant sync to my phone or it will corrupt it.

    I am using an iphone 5. Recently it malfunctioned and I was told by apple that my old back up had a corruption with it an caused my phone to malfunction. Apple had to redownload the operating system. I was also told that I can not use my old back on my phone I need to delete it and manually download everything. I DID NOT USE ICLOUD. However I do have my old back up still on my mac in itunes. Question below....
    Is there a way to access my old Notes only so I can rewrite them in my phone? I still have my old back up but I cant sync to my phone or it will corrupt it. I just want to access my notes so I can type them back into my notes on my fixed phone.

    you can restore from your backup again just to get the notes. once you've restored from the backup, copy your notes into your icloud notes group or email them to yourself - basically, get them somewhere else so they're not just locally stored on the device. once you've moved your notes elsewhere, restore the device as new again like apple had you do. this will again put a fresh version of the operating system on your phone like it has right now
    there's no other way to access the notes that are in your backup

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • Won't boot up to desktop....apple logo spin keeps on going om gray screen. Tried to start in safe mode and it reverted back to same.

    My 4 year old macbook won't boot up.  Stays in the same mode .  Gray screen, apple logo and spinning wheel. Tried booting in safe mode but reverts back to same.  Also tried resetting by removing battery.  Nothing is working!! Any advise before I take it to Apple?

    Try this:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Or, if you have Lion or Mountain Lion:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for