WebCam Go Plus: red light doesn't stop flashing

Hello,
I am experiencing following problem when trying to use the WebCam Go Plus as a digital camera: I take a picture, and the red light indicating that the picture is being written to memory ("busy") doesn't stop flashing. Trying to turn off the camera deosn't work either, and the only way to stop everything is by removing the batteries and starting over again. No picture is written, though. Previous images have been downloaded, so it is not an "disk full" issue.
Any ideas will be highly appreciated (specially by my little daughter, who is trying to take the camera on a trip).
Thank you!

strawinsky,
You can try doing a hardware reset and see if it helps.
You can find the steps at our knowledgebase article SID2096.
Jason

Similar Messages

Hp p1606dn toner light won't stop flashing

HP Laserjet P1606dn
Windows XP
The toner light keeps flashing. I have already installed a new toner cartridge and restarted/power cycled the printer and the problem persists. I am at a loss. Please help.
~James

The Light on the printer flashes for lots of different errors. It may not be the tomer that is the problem. I have attached the error light document that tells you what your specific light patern means.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02497687&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am an HP employee

HT4367 just bought an apple tv and updated it and now the light won't stop flashing... even after i tried to restore via itunes and all i got was a unknown error message... hey apple you guys have a fix for this?

I just got an apple tv and it dosen't work at all. I tried to use the home share feature with my iMac and both devices don't see each other, yet they are o the same network. I am not using a apple router. I tried updating the apple tv to see if that would resolve the issue but now the status light just blinks rapidly. I tried using itunes restore it but all i get is an unknown error. So with all of this said what is the fix apple?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

A 2nd gen shuffle is about six year old at this point. The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge. The initial green light shows a good charge. The red light means the battery is drained.
Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle. The Restore button is on the shuffle's Settings screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings.
Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds. Then, turn it back ON. This resets the shuffle. Does it play again? If it does, let it play until it no longer plays again. Repeat turning it OFF and ON until it no longer plays. Then, connect it to power and charge it to full. See if that makes any difference.
If that does not help, the solution is to replace the battery. If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
If you are good at such things, this web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle

Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5 seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge

Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??

Also my Itunes and computer won'r reconize it

I have no sound in my computer, only with headphones, i tried the software update but it still doesn't work, and i have a red light on in my computer.

I have no sound in my computer, only with headphones, i tried the software update but it still doesn't work, and i have a red light on in my computer. How to resolve that ?

Plug and unlpug the headphone jack with some intention to get the mechanical switch to flip.
You can google for more intrusive methods.
ex. Read through all the many approachs: http://www.ifixit.com/Answers/View/8797/Audio+jack+problem,+no+speaker+sound,+re d+light

After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

Regarding your new Guest Account.
If it is the Guest User created by Find My Mac, it is advisable that you leave it be in order to maintain the functionality of the Find My Mac system. It is not a typical guest account. A person can't use the account to log into the system. It only permits the user (presumably a thief) to use a crippled version of Safari, in which the thief will reveal his/her location, hopefully to an end result wherein you may be able to recover the stolen computer.
The very nature of this unique guest account is to increase the security of the system, not to degrade it as a typical guest account might do.

Red light stops blinking and then stays solid

This one is strange. I open an email on my BB and the red light stops blinking and then stays solid for about 5 minutes. It doesnt go off when I close the email either.
Took the battery out to see if that would clear it but it still doing it.
Any thoughts ?????

Hi Willsie,
Sounds like when the red light is solid, the device is still usable? Assuming this is correct, I have three questions for you:
1. Can you you confirm this problem ONLY happens when you open up emails in the Messages application?
2. Can you tell us the application version you are running from (OPTIONS > ABOUT)?
3. Also, which third party applications do you have installed?
tnx

Phone doesn't turn on, solid red light, requires send back BUT I have a request.

I've essentially figured out that my Z10 needs to be returned for some sort of warranty / repair, however I'm really hoping that we can request that the data on the phone be saved rather than it just be lost forever. Is this possible? There are many important notes that haven't been backed up.
Symptoms: Phone doesn't turn on, red light comes on solid for a few minutes and then turns off. Connecting it to a computer doesn't result in anything (no computer connection, no change in phone).
I am with Bell, and I even live in Kitchener (I could personally drop into BB to sort this out) I wanted to check here as a last resort before sending it back.
Thanks!

Hi and Welcome to the Community!
I used these steps from Geek Squad and it worked for me.
Restore BB10
When a BlackBerry 10 device is only flashing the red light and refusing to boot up, this indicates that the device’s operating system has become corrupted. The flashing light may follow the pattern of 1, 2 or 3 short blips, with a longer pause between the sets.
In order to fix this, you need to re-install the operating system on the device, which will then set the device back to its original factory state.
Please note: this process will completely wipe your device, so please make sure you have a backup of your personal information available to restore before going through this process.
Download and install the latest version of BlackBerry Link for your computer.
Open BlackBerry Link software.
Plug in the BlackBerry device using your USB cable.
At the bottom left of the program, find the device you're having issues with and select it by clicking on it.
The BlackBerry Link application will then ask to either reconnect or reload the device software. Choose Reload.
Confirm the reload when prompted to do so, which will wipe clean any data previously on the handset.
Allow the reload to complete, which can take some time. Whilst this is underway, the device will have a solid green light. This process of downloading and reinstalling the device can take an hour or more, depending on the speed of your internet connection, soplease don't disconnect the BlackBerry until the process has finished.
Once the restore is complete, simply set up your device again, or restore it from a previous backup stored on your machine. However, if you want to restore a previous backup, remember to sign in to your BlackBerry ID on the device first! If you're not sure how to do this, we have a full guide available.
The good news is, this process is almost identical on both PC and Apple Mac. Simply follow the same process as above. Finally, if you have any questions, please don't hesitate to get in touch with us.
VIA | nakumba
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-dead-red-light-blinks/m-p/2478589/highligh...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Found white powder in earphone connection and sound doesn't work, red light coming thru hole

I found a white powder accumulating in the earphone port which after cleaning out delicately, the sound on the computer is grayed off and a redlight comes thru the hole...what is happening, please help, thank you

It sounds as if you're 'stuck' in optical output mode. The usual 'fix' for this is to gently clean the port with a toothpick, until the red light goes out.
No idea what the white powder might be - you haven't spilled something around the port, have you?
Clinton

Kernel Panic plus a Red Light from Audio jack

First off, I'm gettin a Kernel panic EVERY SINGLE time I boot into Macintosh. This is not good. I can't access my Mac partition at all, and now I'm stuck with using Windows.
Secondly, there's this red light that's coming out of my Audio jack. I've done some research and I've already inserted a toothpick and tried to toggle a 'switch' or something, but the red light hasn't gone away. I'm still without any sound.
Any help would be greatly appreciated!

1.
Alright, here's a snapshot of the Kernel Panic message:
http://i.imgur.com/d8jqMYu.jpg?1
2.
And man, I've already tried inserting my headphone jack in and out rapidly, but the red light is still there. Is there any other way?

Recording voice over doesn't give "red light" feedback

In the documentation it says that when a voice over recording begins "A pulsing red light in the upper-left corner of the screen indicates that recording is in progress."
I see the red like graphic and what looks like an audio meter, but they are static--they don't blink or change or anything. So I don't get a visual feedback that it is actually recording or if my audio level is right.
I just installed iWork 09 this week and it seems to be the same results on the 3 different Macs I use around here.
Is this a feature in 09 or did I miss some setting someplace?

Yes, I've proven it is a bug with external sound cards/mixers. I switched to the internal audio on my MacBook Pro and the meter worked fine. I did report it, but who knows if or when it'll be corrected. Perhaps they have an issue with external devices that self-regulate the audio levels?

Z10 doesn't restart and red light blinking only.

Hi,
My z10 phone was normally working, and sometimes it's don't response and hang. last time i tried to restart and it's took long time and i used blackberry link and did software update. in between software update was completed but it was not run. i got problem. Red light blinking.
even i charge it or restart, Red light blinking.
after i face this problem, i tried to slove by autoloader, new BB link and many more action done. Nothing work.
it might be mother board problem???? but i am not technician.
We cann't buy easily motherboard also.
I think Blackberry is totally **bleep**.... Since i have used blackberry storm , storm 9860 and z10 al are **bleep**.

I think BlackBerry is totally awesome...Since I have used BlackBerry Pearl, Curve, Bold, Z10, Q10, and now Z30. All are awesome.
There are so many things that could cause your Z10 to fail. You could have gotten it wet, dropped it, stepped on it, or any other manner of abuse. It could also have just failed on it's own through no fault of your own. Since I know MANY people with BB10 devices right now, including 3 in my own household and another 3 assigned to some coworkers there is no problem with all BlackBerrys.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Blackberry Keeps Rebooting a little then stops red light flashs then reboots again.

Hi.
My blackberry Curve ran out of charge whilst I was a college I went home and charged it. it was fine, Went to the gym and it ran out of battery again. (That day it ran out of charge really quickly) Anyways I get home to charge it and it wouldnt charge, so I took the battery out and now everytime i put the battery in it it Reboots itself the bar moves up like 1cm then the screen goes black and the red light comes on, the red light goes off then its reboots itself back to 1cm and repeats this, Ive tryed to use a different battery but the same happens and I cant connect it to my computer as it just turns off and Ive not even had the phone for a year.

Please help!!!!! my sons blackberry keeps rebooting itself then as it is nearly done it starts again, please can someone help maybe it needs a software upgrade how can one do this when the ph not even coming on

No startup chime, red light, fans running loud...

yeah, I know that there are other threads with the same topic, but I just wanted to know how common this problem is?
How many people have experienced this?
What are the common disturbances?
What is going on?
Why is such an expensive, powerhouse computer become such a puny electronic product because of power issues?
I posted this in another thread but,
Here's my story:
I am having the same problem.
Now before you start taking advice to back up all your data, reformat your hard drive, and reinstall all the software; please take note of a few things:
first off, I'm ****** that this is happening to me. I spend $5000+ for a "reliable" Apple computer. Then it doesn't want to turn on because its not safe. Sorry if I drown this post with bitter sarcasm but I am coming to the end of the line with my patience.
I called Apple Care, read a bunch of posts (here and elsewhere), and yes I do know about the SMU Reset button (like that really does anything?).
My problem happened a few weeks ago and I thought nothing of it at first. There was a power outage for a quick second and it turned everything off. When I went to turn on my computer, there was no chime, the red light was on, and the fans were running and eventually began running very loud. After letting it run like that in hopes of the screen lighting up, I turned it off by holding the power button. By the way, there's nothing on the screen and the keyboard doesn't work (I use a wireless keyboard, but I plugged in the OG cord keyboard to push whatever series of buttons recommended by these "geniuses") Trust me, the computer doesn't make it to that part of the boot process, so stop with commandoption+PR or F12 to get the CD out. It doesn't work! What's up with this computer! It can handle all these intense calculations,etc. but a power surge is going to shut it down indefinitely.
So I left the computer came back the next day, turned it on and its fine. Cool, I'm happy. It's Working!! I go on a few weeks, then I go to turn it on this Monday, same problem. But actually a worse situation. I had a client come over and the computer wouldn't work. I looked like a idiot. Couldn't do anything cause my computer didn't want to turn on. I do music production/editing. I use my G5 for running ProTools LE. I have other programs but that is the main one I use. There's nothing wrong with it. It's optimized for use with the mac. So those people who are going to advise me to uninstall all my software and all that - I appreciate your concern but don't give advice when you don't know anything!
So I am getting frustrated. My client left a little disappointed, but what can you do? I tried to call AppleCare on Mon. but it was Memorial Day. So I waited for Tues.
Tues morning, my computer turns on like everything is fine.
I'm happy but cautious. I talk to AppleCare rep. He tells me that it is a common problem they have heard about with the G5's. Wherever blackouts, brownouts, spikes, sags, dips, and other electricity inconsistencies occur, the Power Mac G5 has a breaker in it which flips so it doesn't receive uneven power supply and damage internal components.
I like that feature. Good thinking Apple. Protecting my investment from bad electrical grids. But I don't like the fact my computer has a mind of its own where it decides when it wants to boot or when it wants to sit there and run its fans all loud.
I shut down Tues morn to go to work. I come back in the evening, it doesn't want to boot up. Instead of getting angry trying a bunch of times to turn on/turn off the computer, I leave my house all together and go and have a few drinks. I come home ,don't even look at my computer, and go to bed.
I wake up Wed. morning. Go to turn on my computer. Successful boot. It's running. Okay, I think, I'm going to get down to the problem. I read all the logs, not like I know every piece of info, but just to see what's happening. Everything looks fine. I decide to run the AppleCare CD Tech Tool. It says restart holding down C. I do that. When the gray Apple Logo comes up, all this writing about kernals comes up and it tells me to restart or shutdown. I shutdown and attempt to restart, same problem: no chime, red light on, and fans eventually spin loud. Now the CD is stuck in there. I'm going to take it to the Apple Store tomorrow to if these "geniuses" can figure it out.
(Just a side note: Apple calls them geniuses, but its hard for me to think some disconnected college kid with a bad haircut and questionable social skills knows what's up with the power supply issues of a computer; maybe I'm wrong, but you can run your diagnostics and look at the chart of what to do and all that BUT Apple needs to listen to the people)
I am going to get a UPS (uninteruptable power supply) with a clean sine wave output to curb the issue at my end. It's not my fault I live in a area that receives uneven power output. I live in Los Angeles. Summer is starting up and I think its going to be hot, so blackouts, power dips and sags are inevitable. I just don't understand why Apple hasn't considered this problem and fixed it with something:
A recall to change the power supply, Is it something on the logic board?, are they going to reimburse me for lost income (Ha, yeah right)
I really want to know how many people are having this problem?
From what I've heard, it is a common problem.
So I think we need a common solution.
If its so common, it must be the computer. We are all going to live in different areas where the power may vary. Not all of us have the consistent power flow of 1 Infinite Loop in Cupertino, CA. So if it is such a common problem, Apple needs to fix it.
I can't spend more than five grand on a super duper computer and have it wuss out on some power issues.
Its a loss of income and productivity to me.
I can't have that anymore.
Sometimes my computer turns on, sometimes it doesn't.
I bought my PowerMac G5 in April 2006, its been about a month and a half and I'm having these problems.
Thank you for your time.
If anyone else has been having this problem, I feel for you.
It was been very difficult for me not to curse in this post, but I have tried to extend the same respect to all that use these discussion boards to create dialogue, find help, and create solutions.
LETS FIX IT!
Peace,
Swami G
Power Mac G5 Mac OS X (10.4.6) Dual 2.3 Ghz / 4.5 GB RAM

Well, you can see my specs below. I have the same problems as you, just worse. I am also running (as I have my previous systems) on an APC Smart-UPS 2200, and it doesn't solve this problem.
I bought my machine last December. In early March (just 2 days before my 90 days of phone support were up), I woke the computer from sleep to check email; about 5 minutes later it just froze. I had to force it down, but it never even got to the startup chime.
Called Apple, bought Apple Care on the spot, spent about 45 minutes on the phone with two levels of support, and Apple couldn't really diagnose the problem. They decided to send out a replacement logic board, processor unit and power supply for on-site service (I don't have an Apple service center nearby).
Nearly two weeks later the technician arrived with the parts, installed all of them, and - nothing. The system still exhibited the same symptoms as before the repair. He spent around five hours here, most of it on the phone with Apple. They decided that the processor unit they shipped was defective, so they sent another processor unit.
Nearly another two weeks later, the re-replacement processor unit arrived with the tech. He installed it, and everything worked. This was around April 1.
Fast forward to last Wednesday. Arrived home from work, tried to wake the Mac. Nothing happened. Had to force the machine off. Never booted again. Called Apple and went through the motions again. They're sending another logic board, processor unit, and power supply.
I asked about having the machine replaced since this will be the third repair attempt, considering it took two visits and nearly a month to repair it the first time it died. Apple was unwilling to replace it but I was told that if I had another failure, a replacement would be in the cards.
I agree with you about needing reliability in a computer as expensive as a Power Mac. It is not acceptable to have this kind of failure, repeatedly, with this kind of system. If my Windows PC has a hardware failure, I can take care of it myself. A top-end power supply is ~$200, a quality system board is ~$200-$300 - all very doable, and in very little time, if the need arises. A Power Mac logic board is ~$1K, a cpu module is well over $1K, who knows how much that crappy power supply costs, etc. If you have Apple Care, you face the kinds of downtime I'm having to deal with. A month without use of your computer. I mean, if I buy a Dell workstation, or an HP workstation, and pay an extra $200-$300 for service and something fails, Unisys will be here the next day and it will be fixed. That's the standard business class service experience you get from those companies with a computer that costs $600, much less the $3000+ you dish out for a Quad Power Mac. Apple's response is unacceptable.
It's a good thing I have kept my Windoze machine around, cause it's really saved my butt the last 2-3 months; that also makes me really sad, because in the last 6-7 years of Power Mac ownership I've had zero problems with any of them. My dad has my previous machine, a Rev A Dual 2.0 G5, and it's rock solid.
I sure hope that the Intel based Power Mac replacement doesn't suffer from what ever seems to afflict the recent Power Macs. I would absolutely hate to abandon OSX, but I will not put up with this kind of quality failure (hardware & service) again.
Power Mac G5 Mac OS X (10.4.4) Quad 2.5 GHz, 4GB RAM, Disk0: 74GB WD Raptor

WebCam Go Plus: red light doesn't stop flashing

Similar Messages

Maybe you are looking for