Webcam node not created
Hi, and first of all, sorry for my english.
I've got a working tv card with node /dev/video and /dev/video0, and a webcam that should be at /dev/video1, but it's not.
[samuel@arch ~]$ ls -l /dev | grep video
lrwxrwxrwx 1 root root 10 mar 18 12:13 video -> v4l/video0
lrwxrwxrwx 1 root root 10 mar 18 12:13 video0 -> v4l/video0
The webcam: (lsusb: Bus 001 Device 003: ID 046d:0928 Logitech, Inc. Quickcam Express) It's supported by the driver qc-usb and i've got working with that driver at another distributions and on arch too (15 days ago), I do the same but /dev/video1 it's not created.
The driver is installed and loaded and I added c-qcam at MODULES array in /etc/rc.conf, same as last time, but the node it's not created.
I use kernel26 (2.6.24-ARCH). ¿Maybe I need some module?
When I connect the webcam, dmesg only says:
usb 1-1: new full speed USB device using ohci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
My user is in the grup video too.
I don't know what more to do. If you need more info just say it. Thanks for your help!
I have a pl2303 Prolific USB to serial adapter (it's a gps mouse) and I'm having a hard time getting it working. It seems there is a problem with the driver pl2303 - it should be using pl2303x, but that's not included with the kernel. There are patches on the interwebz but they seem to date back quite a way and I haven't tried them.
I found out from http://www.linuxquestions.org/questions … ce-614758/ that my device should use the pl2303x driver but then other threads say that the pl2303 driver has been updated in later kernels. Whatever, it's not working for me.
Sorry not to be of help, but I'd be interested if you get any further with this.
Similar Messages
-
USB Storage devices not being detected - device nodes not created?
Hi,
I've installed Arch Linux 64-bit on my Dell workstation, and it doesn't seem to be picking up my USB storage drives. Kernel version is 3.6.3-1.
When I plug in a drive, I see in dmesg:
[391147.657574] usb 1-8: new high-speed USB device number 6 using ehci_hcd
However, I don't see anything else. There's nothing about creating device nodes, or anything like that.
My output from `fstab -l` doesn't seem to mention anything about USB drives either, just my two system drives.
[victorhooi@arch-precision ~]$ sudo fdisk -l
[sudo] password for victorhooi:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 80.0 GB, 80000000000 bytes, 156250000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0f2d18e3
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 718847 358400 7 HPFS/NTFS/exFAT
/dev/sda2 718848 156246015 77763584 7 HPFS/NTFS/exFAT
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdb: 80.0 GB, 80000000000 bytes, 156250000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3a9c7de5
Device Boot Start End Blocks Id System
/dev/sdb1 1 156249999 78124999+ ee GPT
My output from lsusb:
[victorhooi@arch-precision ~]$ lsusb
Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 002 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 002 Device 003: ID 04b3:310d IBM Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Output from blkid - both before and after inserting the drive is identical:
[victorhooi@arch-precision ~]$ blkid -o list -c /dev/null
device fs_type label mount point UUID
/dev/sda1 (not mounted)
/dev/sda2 (not mounted)
/dev/sdb1 /boot
/dev/sdb2 (not mounted)
/dev/sdb3 (not mounted)
When I installed my kernel, I saw warnings about fsck.btrfs - not sure if that's related though:
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.5-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> ERROR: file not found: `fsck.btrfs'
==> WARNING: No fsck helpers found. fsck will not be run on boot.
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.5-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
error: command failed to execute correctly
I checked the output from lsmod, I dont' see usb-storage, but I do see sd_mod.
Any thoughts?
Cheers,
VictorWonderWoofy wrote:At least that is one of the very few times you have to reboot. MS just never actually ships you a new kernel. I have never been able to understand why I need to reboot my machine in windows when I install something like a word processor. What is it actually doing?
I have no idea, too. I usually don't reboot even after kernel update, because I always think "Oh, what the heck, I'll reboot it eventually anyway". As we can see, it's not always a good idea .
WonderWoofy wrote:Edit: Don't forget to mark as solved!
We have to wait for @victorhooi to confirm it . -
LogiTech QuickCam webcam does not create /dev/video0
I have followed the Arch Webcam Wiki, and read numerous posts to get my QuickCam working and I can not seem to get it to create the /dev/video0 .
dmesg sees that it is connected:
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
I am using the spca5xx driver which I got from http://mxhaard.free.fr/spca5xx.html and I was able to compile and install it with no problem.
lsmod | grep spca shows:
lsmod | grep spca
spca5xx 672208 0
videodev 7808 1 spca5xx
usbcore 113796 3 uhci_hcd,spca5xx
lsusb shows:
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 046d:092e Logitech, Inc.
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
I tried recompiling the kernel as it was suggested in a few of the WebCam posts in this forum but I still do not get /dev/video0. Any ideas??
Thank you.Thanks for your help. I took the webcam back and exchanged it for a QuickCam Fusion. This cam uses the the USB Video class drivers available at http://linux-uvc.berlios.de/ and I was able to get the webcam to work, but only in Ekiga, no other apps support it at this time. I will just wait until applications are updated and support it.
Thank you.[/url] -
Could not create the associated SICF node automatically.
Dear Guru,
I have Encountered an issue while creating a BSP application through SE80\BSP Application.
while I am trying to create a BSP application ( for e.g with name ZSR_BSP_APP_01) it is showing following messge :
SICF Node For ZSR_BSP_APP_01.
Could not create the associated SICF node automatically.
Add a node manually using "HTTP Service Maintenance"
(Transaction SICF)
After creating and activating all the pages of it when i am trying to execute it is showing follwing error in Explorer.
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP exception: Application sap/zsr_bsp_app_01 cannot be started. Create an application node using Transaction SICF.
Error type:
Your SAP Business Server Pages Team
please guide how to resolve this issue
how i should creade application node for the object ZSR_BSP_APP_01 using transaction Code SICF.
Please guide me through the setp - by - step procedure to perform it.
Thanks & Regards
Saifur Rahamanfindout the way to resolve this
-
I have created multiple task flows and created the adf menu models. I have created the views for all the nodes and have created shared nodes for the lower level task flows. I have verified that the managed beans are all present for each task flow and they are located in the appropriate menu models XML file and referenced in the root_menu.
When I run the page I get the following error: java.lang.NullPointerException: Shared Node Model not created for query_menu. Check for the existence of the corresponding managed bean in your config files.
I did find another post related to this problem, but did not understand the post.
They suggested looking at the following:
"The file that should contain the menu bean is the file specified in the service-level property "Service Adfc Config". Can you check whether this property has a valid value? Also, make sure the advanced service-level checkbox property "generate ADFc Config Files?" is checked."
Where do I locate the service-level property "Service Adfc Config"? I have been looking through all the config files in the application and the preferences in JDeveloper.
I am new to JDeveloper and ADF.
Thank you for your help.
ChrisHi,
It makes perfect sense that menu_root.xml has a reference to the managed bean #{JhsMigrateModuleMenu}.
This bean should be defined in the adfc-config for your appmodule, probably /WEB-INF/adfc-config-jhsmigratemodule.xml
It looks like this (with different names):
<!-- DEBUG:BEGIN:MENU_BEAN : default/misc/facesConfig/menuBean.vm, nesting level: 2 -->
<managed-bean>
<managed-bean-name>AppModuleMenu</managed-bean-name>
<managed-bean-class>oracle.jheadstart.controller.jsf.bean.JhsXMLMenuModel</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>source</property-name>
<property-class>java.lang.String</property-class>
<value>/WEB-INF/menu-appmodule.xml</value>
</managed-property>
</managed-bean>
<!-- DEBUG:END:MENU_BEAN : default/misc/facesConfig/menuBean.vm, nesting level: 2-->
I guess that this definition is missing or has the wrong name or something. Perhaps it is pointing to an invalid XML menu model file (in my case /WEB-INF/menu-appmodule.xml)
Can you post your findings here?
Regards
Evert-Jan de Bruin
JHeadstart Team -
Could not create/access the TopLink Session.While invoking OSB proxy.
Hi,
While testing an OSB proxy ,which uses a multi datasource to connect to a remote database, from the sbconsole.I am getting exceptions and it is not able to create/access the TopLink Session.
I have checked the multi datasource jndi name ,which is correct.
The stack trace which I am getting while invoking the service is posted below:
oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/CRN_CommonServices/SaveTransactionBSV2 [ SaveTransactionBSV2_ptt::SaveTransactionBSV2(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SaveTransactionBSV2' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
; nested exception is:
JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:225)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundBindingServiceImpl.invoke(JCATransportOutboundBindingServiceImpl.java:136)
at com.bea.wli.sb.transports.jca.JCAOutboundMessageContext.sendRequestResponse(JCAOutboundMessageContext.java:152)
at com.bea.wli.sb.transports.jca.JCAOutboundMessageContext.send(JCAOutboundMessageContext.java:113)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:464)
at sun.reflect.GeneratedMethodAccessor249.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
at $Proxy76.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:543)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:478)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:544)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:422)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:583)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatchSync(PipelineContextImpl.java:466)
at stages.transform.runtime.WsCalloutRuntimeStep$WsCalloutDispatcher.dispatch(WsCalloutRuntimeStep.java:1401)
at stages.transform.runtime.WsCalloutRuntimeStep.processMessage(WsCalloutRuntimeStep.java:236)
at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
at com.bea.wli.sb.stages.impl.SequenceRuntimeStep.processMessage(SequenceRuntimeStep.java:33)
at com.bea.wli.sb.pipeline.PipelineStage.processMessage(PipelineStage.java:84)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Pipeline.processMessage(Pipeline.java:141)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.PipelineNode.doRequest(PipelineNode.java:55)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:191)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:75)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:263)
at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:68)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:125)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:123)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:128)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:441)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:169)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:136)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:572)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/CRN_CommonServices/SaveTransactionBSV2 [ SaveTransactionBSV2_ptt::SaveTransactionBSV2(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SaveTransactionBSV2' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
; nested exception is:
JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:619)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:331)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:220)
... 57 more
Caused by: JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:473)
at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:216)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:638)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:457)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:222)
at oracle.tip.adapter.db.DBInteraction.executeStoredProcedure(DBInteraction.java:1001)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:232)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:463)
... 59 more
Caused by: javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
at oracle.tip.adapter.db.exceptions.DBResourceException.missingPropertyException(DBResourceException.java:348)
at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:932)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:413)
... 64 more
Looking forward for your help.
Thanks a lot in advance.
SumitHave you created XA data source? If yes then make sure that in connection factory you are assigning the JNDI name of data-source in XAdataSource property (NOT in datasource property). Also make sure that your datasource is up and running and you are updating the dbadapter after creating connection factory.
Regards,
Anuj -
Adobe After Effects CC 2014 Multi-machine rendering does not create RCF after Collect-File
This was working in the previous release. After going through all of the steps to perform a multi-machine render, not only does it say it is limiting it to 5 machines instead of the usual 99 (and I have over 100 cores on the render farm) but "Collect Files" (File/Dependencies/Collect Files) does not create the Render Control File (RCF) that kicks off the process on the other machines, like it did before and is supposed to do.
This release was supposed to fix the 32 core limitation on render nodes (my server has 48), but now does nothing at all.
Anyway, I assume there is a check box somewhere that says "do something" that hasn't been checked and another that says "Maybe my machine has more than 5 cores", and I would appreciate being steered in the direction of these new mis-features.
Just as background, the 48 core server does show the little TV screen that monitors the watch folder, and I know for a fact that process looks for the "RCF" file. Looking at the directory specified for "collect files", I can see that no RCF file is created, only 1 file, a report.txt file which contains this information is produced:
Report created:
7/9/2014 1:54:12 AM
Project name: highup.aep
Source files collected to:
P:\temp\highup folder
Source files collected: All
Collected comps:
Thomas Falke - High Again High On Emotion)
Number of collected files: 1
Size of collected files: 63.4 MB
Collected source files:
C:\Users\Jeff K\Videos\Down\2014-2015\Thomas Falke - High Again High On Emotion).mp4
Rendering plug-ins:
Classic 3D
Effects used: 1
Effect: Detail-preserving UpscaleThe dialog box has been slightly refactored. You must click "Allow watch folder rendering" and then all is good. Hope this helps anyone else. Thanks to Rafil at customer support chat for this.
-
Parent node showing in schema when child nodes not present
I had several folks answer my questions on mapping from a flat file to an EDI 835 schema and I am down to just a couple of issues before I finish up. I have a conditional mapping issue that I have to solve before I can map the rest of the document. I am
mapping three fields in a single non-repeating line in the flat file to a repeating segment in the 835. Basically I need to create a separate AMT_ClaimSupplementalInformation segment for each field in the flat file line. As you can see in the picture
below I want to create a AMT_ClaimSupplementalInformation segment for CDISCOUNT, CINELIGIBLE and CALLOWED.
You can see I have quite a bit of conditional logic attached to the three fields, but I have all three connected via a loop to the AMT_ClaimSupplementalInformation parent. I cannot attach the loop to the parent of the three fields because it only appears
once in the file. And if I leave the loop out the AMT segments get stacked funny, like this:
<AMT_ClaimSupplementalInformation>
AMT1
AMT1
AMT2
AMT2
</AMT_ClaimSupplementalInformation>
You can see how they should be stacked in the next pic.
In some cases however, one of those fields may be blank so I will not need to create a AMT_ClaimSupplementalInformation segment for it. I was able to use some conditional mapping ideas you guys gave me using the Not-Equal and Value Mapping functoids, and
that works great to keep blank child nodes from being created. However, Since I have a loop attached to the AMT_ClaimSupplementalInformation parent node it still creates an empty parent node even when the child nodes are not created. See the empty parent
node in the pic below.
Since looping functoids can only be attached to links I don't know how to make the parent node conditional.
Any suggestions?
Thanks.Boatseller, thanks for the tip. I did end up going the XSLT direction. It's a bit of a hack, but I'm using the following XSLT to eliminate empty nodes :
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="@*|node()">
<xsl:if test=". != ''">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
I created a new map with the 835 schema on each side. I then created an XSLT file and pointed to it in the Custom XSLT Path property. It seems to work well. I call this map right after my FlatFile_To_835 map.
I was hoping to use the scripting functoid with inline XSLT in the map so that I didn't have to worry about deploying the XSLT file(just another thing to keep up with in the future), but when I compile it I get the following error:
The "Scripting" functoid has 1 input parameter(s), but 2 parameter(s) are expected.
I'm wondering if I'm connecting the schemas incorrectly in the map:
In any case, I'm past the empty nodes issue for now, which was a big roadblock. Now I have to deal with the CAS segments which are, as you said, a real pain.
Thanks for all of your input. -
Could not create/access the TopLink Session. This session is used to connect to the datastore.
We are getting the below error in our production server & also other servers(UAT, Staging). Only option is to restart the OSB server.
Test connection is working fine and able to connect the database without any issue. We have enabled connection leak profiling and also, provided the inactive time outs , still does not work. Need your suggestion for the below error.
***endpoint***:https://extzwsdev.zurichna.com/services/RiskAnalysis-v1***
Payload<soapenv:Envelope xmlns:soapenv = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:ris = "http://webservices.zurich.com/zsoa/nac/underwritingmanagement/riskanalysis-v1_0" xmlns:zsoa = "http://schemas.zurich.com/zsoa/nac/underwritingmanagement/2009/11/zsoa" xmlns:com = "http://schemas.zurich.com/zsoa/nac/underwritingmanagement/2009/11/common" xmlns:con = "http://schemas.zurich.com/zsoa/nac/underwritingmanagement/2009/11/contractandspecification" xmlns:fin = "http://schemas.zurich.com/zsoa/nac/underwritingmanagement/2009/11/financialservicesagreement" xmlns:par = "http://schemas.zurich.com/zsoa/nac/underwritingmanagement/2009/11/party" xmlns:act = "http://schemas.zurich.com/zsoa/nac/underwritingmanagement/2009/11/activityconditionplace"> <soapenv:Header/> <soapenv:Body> <ris:calculateTargetPolicyRateChangeByProductGroup> <ris:insurancePolicySearchCriteria> <con:externalReference>1151638</con:externalReference> </ris:insurancePolicySearchCriteria> </ris:calculateTargetPolicyRateChangeByProductGroup> </soapenv:Body></soapenv:Envelope>
***RTOneService Output Response*** <?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode><faultstring>BEA-380001: [invokeExecutionFault] Error Dispatching the Event: unexpected error. - [BEA-380002] Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:586)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:154)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:446)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:584)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:67)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:74)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:92)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:67)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:45)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:34)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkManagerServiceImpl.java:153)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:261)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
... 32 more
Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:650)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:369)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:328)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:352)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:259)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:585)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:445)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:582)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:66)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:73)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:90)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:66)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:44)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:33)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkManagerServiceImpl.java:152)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
... 1 more
Caused by: BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.db.exceptions.DBResourceException.createRetriableException(DBResourceException.java:676)
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:645)
at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:314)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:918)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:375)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:256)
at oracle.tip.adapter.db.DBInteraction.executeOutboundRead(DBInteraction.java:311)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:233)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:535)
... 38 more
Caused by: java.sql.SQLException: Invalid state, the Connection object is closed.
at net.sourceforge.jtds.jdbc.ConnectionJDBC2.checkOpen(Unknown Source)
at net.sourceforge.jtds.jdbc.ConnectionJDBC2.getMetaData(Unknown Source)
at weblogic.jdbc.wrapper.Connection.getMetaData(Connection.java:479)
at oracle.tip.adapter.db.toplinkext.NameEnquoter.init(NameEnquoter.java:122)
at oracle.tip.adapter.db.toplinkext.NameEnquoter.init(NameEnquoter.java:92)
at oracle.tip.adapter.db.toplinkext.NameEnquoter.<init>(NameEnquoter.java:59)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:705)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:375)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:256)
at oracle.tip.adapter.db.DBInteraction.executeOutboundRead(DBInteraction.java:311)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:233)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:535)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:369)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:328)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:352)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:259)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:586)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:154)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:446)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:584)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:67)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:74)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:92)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:67)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:45)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:34)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkManagerServiceImpl.java:153)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
... 1 more
.</faultstring><detail><con:fault xmlns:con="http://www.bea.com/wli/sb/context"><con:errorCode>BEA-380001</con:errorCode><con:reason>[invokeExecutionFault] Error Dispatching the Event: unexpected error. - [BEA-380002] Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:586)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:154)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:446)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:584)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:67)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:74)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:92)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:67)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:45)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:34)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkManagerServiceImpl.java:153)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:261)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
... 32 more
Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:650)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:369)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:328)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:352)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:259)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:585)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:445)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:582)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:66)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:73)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:90)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:66)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:44)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:33)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkManagerServiceImpl.java:152)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
... 1 more
Caused by: BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.db.exceptions.DBResourceException.createRetriableException(DBResourceException.java:676)
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:645)
at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:314)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:918)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:375)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:256)
at oracle.tip.adapter.db.DBInteraction.executeOutboundRead(DBInteraction.java:311)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:233)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:535)
... 38 more
Caused by: java.sql.SQLException: Invalid state, the Connection object is closed.
at net.sourceforge.jtds.jdbc.ConnectionJDBC2.checkOpen(Unknown Source)
at net.sourceforge.jtds.jdbc.ConnectionJDBC2.getMetaData(Unknown Source)
at weblogic.jdbc.wrapper.Connection.getMetaData(Connection.java:479)
at oracle.tip.adapter.db.toplinkext.NameEnquoter.init(NameEnquoter.java:122)
at oracle.tip.adapter.db.toplinkext.NameEnquoter.init(NameEnquoter.java:92)
at oracle.tip.adapter.db.toplinkext.NameEnquoter.<init>(NameEnquoter.java:59)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:705)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:375)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:256)
at oracle.tip.adapter.db.DBInteraction.executeOutboundRead(DBInteraction.java:311)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:233)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:535)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:369)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:328)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:352)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:259)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:586)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:154)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:446)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:584)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:67)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:74)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:92)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:67)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:45)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:34)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkManagerServiceImpl.java:153)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
... 1 more
.</con:reason><con:location><con:node>RouteNode1</con:node><con:path>response-pipeline</con:path></con:location></con:fault></detail></soapenv:Fault></soapenv:Body></soapenv:Envelope>
!!! Exception occurred <?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode><faultstring>BEA-380001: [invokeExecutionFault] Error Dispatching the Event: unexpected error. - [BEA-380002] Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:586)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:154)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:446)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:584)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:67)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:74)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:92)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:67)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:45)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:34)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkManagerServiceImpl.java:153)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:261)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
... 32 more
Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/UWIS/RiskAnalysis-v1.0/DBAdapters/getCMRateTrackerData [ getCMRateTrackerData_ptt::getCMRateTrackerDataSelect(getCMRateTrackerDataSelect_inputParameters,TblCmRctrackerMatch2009Collection) ] - WSIF JCA Execute of operation 'getCMRateTrackerDataSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by java.sql.SQLException: Invalid state, the Connection object is closed..
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:650)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:369)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:328)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:352)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:259)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:585)
at sun.reflect.GeneratedMethodAccessor652.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at com.sun.proxy.$Proxy139.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:510)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:445)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:582)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:449)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransportDispatcherDelegate.send(TransportDispatcherDelegate.java:66)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.TransactionalDispatcherDelegate.send(TransactionalDispatcherDelegate.java:51)
at com.bea.alsb.flow.messaging.dispatcher.servicebus.ResultCacheDispatcherDelegate.send(ResultCacheDispatcherDelegate.java:50)
at com.bea.alsb.flow.messaging.dispatcher.ServiceBusDispatcherHandler.send(ServiceBusDispatcherHandler.java:93)
at com.bea.bpel.services.messaging.OutboundDispatcherServiceImpl.send(OutboundDispatcherServiceImpl.java:73)
at com.bea.bpel.internal.dispatcher.OutboundDispatcherImpl.dispatch(OutboundDispatcherImpl.java:91)
at com.bea.bpel.interpreter.internal.instruction.messaging.InvokeRequest.enter(InvokeRequest.java:90)
at com.bea.bpel.interpreter.internal.process.ProcessNodeImpl.enter(ProcessNodeImpl.java:181)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:155)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:87)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:66)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:44)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventJobScheduled(SchedulerServiceContextImpl.java:87)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:68)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:33)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at com.bea.alsb.platform.weblogic.WlsWorkManagerServiceImpl$WorkAdapter.run(WlsWorkMaIts hard to say what is going on. Though the message says the error is in obtaining a TopLink session, the exception stack has nothing to do with TopLink, and the error seems to be coming from oracle.tip.adapter.db.toplinkext.NameEnquoter.init() directly calling weblogic.jdbc.wrapper.Connection.getMetaData() on what must be a stale or closed connection. This looks like a DB adapter application, so you might want to post this question there as they might be able to help configure your datasource appropriately for the application.
Best Regards,
Chris -
Clone to New Windows Hardware: appsTier Apache Service not Created
I am trying to migrate my production 11.5.9 apps on windows to new hardware. This is a one to one clone. The only things that are changing are:
1. OS User Name
2. Server Names
3. APPL Top, COMN Top, 8.0.6 Home and iAS Home on the target server.
I have completed the move of the dbTier to the new DB Node. When I run perl adcfgclone.pl appsTier on the new server for the APPS and WEB node it completes with no errors and creates a number of non-used servers but does not create the Appace or the Forms services.
Any help would be great!!! I need to have this done before the end of the weekend for testing!!!I reviewed the logs but did not see anything... but I am not realy sure what to tlook for.
The postclone created 11 services like...
Oracle Web Intergration Service
OracleDiscoverer41_<NEW SID_NAME>
Oracle<NEW SID_NAME>_* -
Log file is not created used util.logger
I need to write a log into a file using java.util.logging.
File name should read from properties file.
Issue is file is not created in D:\TestLogging.log
Below are the configuration:
src\resources\logger.properties
handlers=java.util.logging.FileHandler, java.util.logging.ConsoleHandler
.level=INFO
java.util.logging.ConsoleHandler.level=SEVERE
java.util.logging.ConsoleHandler.formatter=java.util.logging.SimpleFormatter
java.util.logging.FileHandler.level=ALL
java.util.logging.FileHandler.pattern=D:\TestLogging.log
# Number of output files to cycle through, by appending an
# integer to the base file name:
java.util.logging.FileHandler.count=1
# Style of output (Simple or XML):
java.util.logging.FileHandler.formatter=java.util.logging.SimpleFormatter
SimpleLogger.java
import java.util.logging.*;
public final class SimpleLogger {
public static void main(String argv[]) {
SimpleLogger thing = new SimpleLogger();
thing.doSomething();
public void doSomething() {
fLogger.finest("this is finest");
fLogger.finer("this is finer");
fLogger.fine("this is fine");
fLogger.config("this is config");
fLogger.info("this is info");
fLogger.warning("this is a warning");
fLogger.severe("this is severe");
fLogger.logp(Level.INFO, this.getClass().toString(), "doSomething", "blah");
Throwable ex = new IllegalArgumentException("Some exception text");
fLogger.log(Level.SEVERE, "Some message", ex);
fLogger.exiting(this.getClass().toString(), "doSomething");
private static final Logger fLogger =
Logger.getLogger(SimpleLogger.class.getName());
Could you please help, any configuration is missedMalar,
Check for the file in the server folder of your server installed directory.
ie..<Drive where server installed>:\usr\sap\<name>\<instance>\j2ee\<server node>
Regards
Abu Bakar -
The Migration process did not create views in the oracle schema. The access source database has 60 queries. There are no errors in the error log about view creation. As I understand, the migration process should convert the queries in access 2000 as views in Oracle 9i. Any ideas? Thanks in advance.
Hi,
You mention that the MS Access database contained 60 queries. Can you please verify the following:
1. In the Source Model of the Migration Workbench, a node titled "Queries(60)" is displayed in the database tree.
2. In the Oracle Model of the Migration Workbench, a node titled "Views(60)" is displayed in the Users | <database_name>.
Basically for each captured MS Access query, there should be a corresponding view created in the source model. If errors were reported during the mapping phase, then such errors will not be reported in the error.log file. I would suggest reviewing the contents of the Log Window and check for any parsing errors reported during the Capture phase of the migration process. You can access the Log Window via the Tools | Log Window menu option of the workbench. From this window, select the Edit | Preferences menu option and select "Error Messages" to just display any reported error messages. Please refer to the documentation for further information on the migration of queries. Some may require manual changes, if they failed during the parsing process.
I hope this helps.
Regards,
Hilary -
Profitability Segments are not created for Invoices
Hi Guru's
Can any one help on this ?
"Invoice Documents Profitability Segments are not created" can you please suggest me?
Thanks,
AakashHi Aakash,
I think you are trying to integrate FICA with CO-PA and then getting the error.
The posting of a contract accounts A/R & A/P document in CO-PA is dependent on-
(a) Activation of the operating concern in the SPRO node Controlling → Profitability Analysis →
Structures → Define Operating Concern → Maintain Characteristics
and
(b) CO short account assignment of the contract in the SPRO Node Financial Accounting → Contract
Accounts Receivable and Payable → Basic Functions → Posting and Documents → Documents
→ Define Account Assignments for Automatic Postings → Store CO Short Account Assignments
for IS-U Contracts.
In here, the system only carries out the posting if the Profitability Segment Assigned selected in CO
account assignment.
Hope it helps...
Thanks,
Amlan -
Central Inventory was not created with rapid Install Version 12.1.1.9
Hi,
I have installed a new R12.1.1 E-Business environment on HP-UX Itanium-64 bit., by following the below note,
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for HP-UX Itanium [ID 762891.1]
Everything was running fine without any issues...
But for the database "opatch lsinventory" is giving the error : OPatch cannot find a valid oraInst.loc file to locate Central Inventory.
I have noticed the Central Inventory is not created under /var/opt/oracle..
I did a mistake by not verifying the Latest Rapid Install version as mentioned in the above Doc under "Before Installing or Upgrading" section..
The latest is version : 12.1.1.11 and mine was : Version 12.1.1.9..
Is there a way to overcome this issue by manually creating the central inventory , I need to apply few database patches...
Thanks,
Chan.Thanks Hussein.
The note has mentioned about registering RDBMS Oracle_home by using -atachhome option(2nd Procedure),do we need to do this for the rest of the Oracle Homes too,like Web Home and Tools Home..?
We have a typical two node install with CCM/Admin on the DB node..,No shared application tier.
Also is it fine to go with the second procedure from the Doc rather than the first one(Note that the first procedure also updates the Local Inventory, so is the recommended one when fixing Cloning or Install related issues.)
Please advice..
Thanks
Chan. -
Is there any possiblity to write and execute code before nodes get created in the content?
Hi,
I have created a dialog and after clicking OK the data is stored in the content. But I've the following requirement: "After clicking OK button on the dialog and before the data stored into the content, I've to do some action(I want to write some code)". Is it possible? Where can I write the code to perform the action before nodes get created? Let me know the solution. Your comments are welcome.
Thanks & Regards,
AryaThis forum is only for discussions on the forums themselves. You should look in here for the forum corresponding to the Adobe product you are using and post your question there:
http://forums.adobe.com/index.jspa?view=discussions
When you do, please don't forget to provide enough information. We not only don't know what program you are talking about, but we don't even know if you are in Mac or Win.
Maybe you are looking for
-
Copy Attachments of sharepoint list item to a document library using Javascript on click of a button
The requirement is as follows: 1. We have a SP list. All items in the list have mulitple attachments. 2. On click of a button, All the attachments of all items should be copied to a document library This is to be done from client side only. No server
-
Please help me. I'm new to Oracle.
Hello all I'm Sean and new to Oracle and wana purse learning Oracle Forms&Reports but to start I need to also learn Oracle DataBase as well. Please I know you're all busy but HELP me to fix this problem and start learning Oracle. I've installed oracl
-
Maintaining Widescreen on export
Hi. i know this must be quite remedial to most of you guys but it's killing me. I'm editing widescreen HD format from my HD camera. 1080:60. All is good and I can export to a self contained quicktime movie correctly but I want to also export it as a
-
Hey guys, As I've noticed, I can increase or decrease VRAM value in Windows 7 ( bootcamp ) in Intel Graphics Tool ( included to bootcamp drivers ) up to 2048 MB. So the question is - can I do the same on Mac OSX ? Small note: after Mavericks update I
-
How to read a comma separated file in web dynpro for java?
Hi, I am new to web dynpro for java, i am trying to develop an application where i am uploading file which is a comma separated file i need to read the content of it and then call an rfc pass those values to it. i have created the ui for the affores