Shared Node Model not created

I have created multiple task flows and created the adf menu models. I have created the views for all the nodes and have created shared nodes for the lower level task flows. I have verified that the managed beans are all present for each task flow and they are located in the appropriate menu models XML file and referenced in the root_menu.
When I run the page I get the following error: java.lang.NullPointerException: Shared Node Model not created for query_menu. Check for the existence of the corresponding managed bean in your config files.
I did find another post related to this problem, but did not understand the post.
They suggested looking at the following:
"The file that should contain the menu bean is the file specified in the service-level property "Service Adfc Config". Can you check whether this property has a valid value? Also, make sure the advanced service-level checkbox property "generate ADFc Config Files?" is checked."
Where do I locate the service-level property "Service Adfc Config"? I have been looking through all the config files in the application and the preferences in JDeveloper.
I am new to JDeveloper and ADF.
Thank you for your help.
Chris

Hi,
It makes perfect sense that menu_root.xml has a reference to the managed bean #{JhsMigrateModuleMenu}.
This bean should be defined in the adfc-config for your appmodule, probably /WEB-INF/adfc-config-jhsmigratemodule.xml
It looks like this (with different names):
<!-- DEBUG:BEGIN:MENU_BEAN : default/misc/facesConfig/menuBean.vm, nesting level: 2 -->
<managed-bean>
<managed-bean-name>AppModuleMenu</managed-bean-name>
<managed-bean-class>oracle.jheadstart.controller.jsf.bean.JhsXMLMenuModel</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>source</property-name>
<property-class>java.lang.String</property-class>
<value>/WEB-INF/menu-appmodule.xml</value>
</managed-property>
</managed-bean>
<!-- DEBUG:END:MENU_BEAN : default/misc/facesConfig/menuBean.vm, nesting level: 2-->
I guess that this definition is missing or has the wrong name or something. Perhaps it is pointing to an invalid XML menu model file (in my case /WEB-INF/menu-appmodule.xml)
Can you post your findings here?
Regards
Evert-Jan de Bruin
JHeadstart Team

Similar Messages

  • Shared Memory Service Not Created Yet

    Hi Everyone,
    I had to get a new printer because the baby did something to my old one and now it won't print clearly. I got an HP Officejet 4315 because it was the only one that said it supported 10.2.8. When I installed the software, I got a message saying, "Driver Not Installed." I checked the HP website, and they said to install the BSD from my CD's, which I did, now when I click on "HD Assistant" I get a message saying, "Shared Memory Service Not Created Yet."
    I can't find anything on the HP or Mac websites about this error message. I e-mailed HP Support, they said to repair permissions and re-boot, which I did, but I still get that error message.
    Please don't tell me to buy a new computer so I can get a new OS, because that's not financially feasible at the moment, since I'm a stay-at-home mom.

    You're Welcome Lizzy!
    Upgrading your Mac to Panther 10.3.x would be quite painless, and depending on whether it meets the Panther System Requirements, and the Additional Panther System Requirements, also relatively inexpensive.
    If you know what to look for, a Full Retail Version, of the Panther Install CDs, can also be purchased rather inexpensively, at some additional online Apple retailers, Amazon, eBay, FastMac, etc.
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Panther is only on CDs, not DVDs.
    Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, or CPU Drop-in DVD, on them.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    Also, Thank You, for extending the courtesy, of awarding in Discussions.
    ali b

  • SAP RM: How can I create a Node when the node is not visible for the user

    Hi,
    Product: SAP records Management for Public Sector
    Version: 7.00
    is it possible to create a instance node when the model not is not visible for the active user?
    I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
    Regards and thanks for every beginning
    Fanninger Thomas

    Hi,
    here an example.
    When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
    When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
    So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
    Regards
    Fanninger Thomas
    Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

  • Activation error : context model node has not been bound to a model class

    Hi All,
    I have DC project, which i am able to run without error, But when i try to activate this DC project, I am getting below error in activation log : Please help me out, It's very urgent...
    [wdgen] [Info]    Generating packages/com/ltli/crtmachineord/models/zp3019_dealer_default_valuesmodel/Zp3019_Dealer_Default_Values_Output.java
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Salesorder_Mac_Texts_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Get_Employee_Name_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CustnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
         [wdgen] [Warning] com.ltli.crtmachineord.views.longtextview.LongTextView --> TextEdit txe_LongText: UIElement does not have a label
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.MatnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesDocType_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOrg_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label DistChannel_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Division_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOffice_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesGroup_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Plant_lbl [labelFor]: labelFor is not set
         [wdgen] [Error]   com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> TextView txv_Ename [text]: Context element and property are not compatible
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_CustNo [labelFor]: labelFor is not set
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_ConsigneeTo [labelFor]: labelFor is not set
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_Pin [labelFor]: labelFor is not set
    Thanks
    Sandy

    We could resolved the problem by creating new DC project
    and copying the content of existing Dc project into new DC.
    (Also created new activity for this new DC), Build & Deploy the project.
    Now we are able to activate the new activity without any error.
    Thanks
    Sandy

  • Activation Failed: The context model node has not been bound to a model cla

    Hi Experts,
    I have created a DC for Models and created a DC for the Application.
    Have done all the steps that are required for getting the Model DC into the Application DC.
    Have made all the binding to the Controller and View, But durring the activation, I am receiving an error as given below
    [wdgen] [Info]    Initialize generation templates from configuration jar:file:/usr/sap/NWI/JC63/j2ee/cluster/server1/temp/CBS/22/.B/11457/DCs/sap.com/tc/bi/extwd/_comp/gen/default/public/def/lib/java/SapWebDynproGenerationCore.jar!/WebDynproGenerationConfigurationCompiled.xml
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelNode Zmm_Bapi_Get_Material_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Im_Maktg [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Im_Werks [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Im_Matnr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelNode Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    XXX.sampledc.CN_SAMPLEDC --> ContextModelNode Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Ex_Message [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Ex_Flag [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelNode It_Outtab2 [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    XXX.sampledc.CN_SAMPLEDC --> ContextModelNode It_Outtab2 [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Picture [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Waers [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Infnr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Netpr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Inco1 [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Ekorg [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Lifnr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Price_Unit [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Maktx [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Name1 [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Filep [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Matnr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Werks [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Inco2 [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelNode It_Outtab [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    XXX.sampledc.CN_SAMPLEDC --> ContextModelNode It_Outtab [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Picture [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Ebeln [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Waers [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Netpr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Inco1 [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Lifnr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Price_Unit [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Ebelp [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Name1 [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Filep [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Matnr [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Txz01 [referencedProperty]: The context model attribute has not been bound to a model property
         [wdgen] [Error]   XXX.sampledc.CN_SAMPLEDC --> ContextModelAttribute Inco2 [referencedProperty]: The context model attribute has not been bound to a model property
    Thanks & Regards,
    Palani

    Hi Palani,
    May be something is missed while checking in the activity. This is what you can do:
    1) Note the error.
    2) You will have to forcefully activate the activity since its already checked in.
    3) Create a dummy activity and do the following:
                              Right click on the DC in the Webdynpro Perspective and Click on Repair and chose Project Structure and Classpath.
                              Right click on the DC in the Webdynpro Perspective and Click on Rebuild.
                              Right click on the DC in the Webdynpro Perspective and Click on Reload.
                             Close the DC and then open the DC again.
             Add these files to repository in the following way: Go to DC Perspective Expend the DC node Right Click on the src folder Chose DTR Chose Add Chose
                             Subtree. It will add the changes to the central repository and now if you Checkin the activity and see the results the changes will be effective.
    4) Also map the context attribute once again.
    5) Now check in the activity and try to activate.
    Regards.
    Rajat

  • Family sharing calendar not created

    i have set up Family Sharing for two family members and myself.  They accepted my invitatioms and everything appears to be working properly, but a shared calendar wasn't created 'automatically' as promised.  The shard photo album was created and I have already approved two app purchases for my son, but am not sure what to do about the calendar.  Any help would be appreciated.

    I had this problem but my iCloud calendars were turned on.
    Tried lots of stuff but finally powered down and restarted the device and it showed up just fine.
    Keep Calm
    and
    Reboot

  • CUA: Model view not created automatically in Child System

    Hi, I try to create a CUA with just a child system thru txn SCUA. The result of generation is good and all green. The part that is not right is I do not see the model view created in txn BD64 of child system, I can see it created in master system. Both RFC of master and child system are working fine. I do not see errors at WE20 & WE21 as well. Under this situation, I can see CUA active in master system but not child system. Hence, CUA is not working as it says in master system.
    I have setup CUA couple of times before but this is the first time that I encounter such a weird situation. Does anyone has any clue where could have gone wrong?
    Edited by: Annie Chan on Jul 25, 2008 5:23 PM

    Hi Everyone,
    It is indeed a RFC issue but it was a silly mistake with the incorrect hostname that I am suppose to connect to. Hence, the Distribution Model doesn't exist in the child system. Nervertheless, your advise does point to the right direction.
    Thanks so much for your input. Points are granted as accordingly.
    Regards,
    Annie

  • When I start Internet Sharing /etc/bootpd.plist is not created and the other device is not assigned an IP address.

    Just like the tite says. I am investigating why my Macbook Pro (3,1) running Mountain Lion will not assign an IP address to a computer connected via Ethernet when Internet Sharing is turned on (laptop receiving WiFi connection, supposed to be sharing connection over ethernet). I tested using a relatives macbook and it worked just fine. It turns out my laptop is not creating the file: /etc/bootpd.plist when Internet Sharing is turned on.
    I have a console log here from when I start internet sharing:
    8/11/12 12:01:13.634 PM
    InternetSharing[724]
    objc[724]: Object 0x7f94c940ead0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
    8/11/12 12:01:13.642 PM
    com.apple.InternetSharing[724]
    bind(bootps 67): Address already in use
    8/11/12 12:01:13.642 PM
    com.apple.InternetSharing[724]
    error creating internal interface for devname bridge0@0: Address already in use
    8/11/12 12:01:13.644 PM
    com.apple.InternetSharing[724]
    no bridge interface to service en0
    8/11/12 12:01:13.644 PM
    com.apple.InternetSharing[724]
    unable to create service for en0
    8/11/12 12:01:13.645 PM
    com.apple.InternetSharing[724]
    _MISStartServiceDHCPWithOptions "en0": Operation not supported by device
    8/11/12 12:01:13.645 PM
    com.apple.InternetSharing[724]
    *** no external service
    8/11/12 12:01:38.065 PM
    com.apple.InternetSharing[724]
    *** no external service
    Any help is appreciated!

    Solved it, at least temporarily:
    Investigate process binding port 67 with the following command:
    sudo lsof -i 67
    Close the offending process (in this case: bootps):
    sudo /bin/launchctl unload -w /System/Library/LaunchDaemons/bootps.plist
    Start internet sharing again from the system preferences panel

  • The passive node should not be shared by any other SQL instance.

    Dears,
    the customer has SQL cluster  with multiple instance for many technology.  Can I install new instance to host Lync backend database or not ??? 
    I found in the below URL
    "SQL Clustering support is for an active/passive configuration. For performance reasons, the passive node should not be shared by any other SQL instance."
    I want to understand Why Lync 2013 the backend SQL passive node should not be shared by any other SQL instance. whish is mean that I can not install SQL new instance to host LYNC backend on the current my SQL cluster which is work with multiple  instance
    http://technet.microsoft.com/en-us/library/gg398990.aspx
    Amr Nassar

    Hi Amr,
    Yes you can install a new instance on your cluster to host the Lync back end database. I believe the statement about not sharing the passive node with any other SQL instance refers to a SQL instance outside of the A/P cluster. (Basically the passive node
    should be purely that and able to handle the load in the event it becomes the active node without anything else hindering it)
    Providing your SQL cluster is able to handle the load Lync places on it along with everything else you should not have any issues.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)

  • Crystal Reprot -Could not create shared cache

    HI ALL,
    When i  try to login into crystal reprot 9
    I am getting bellow error.
    Could not create shared cache(0,0)
    when viewing a report in Crystal Reports.
    Could please provide me information

    Post to the [Crystal Reports Design|SAP Crystal Reports; forum.
    Ludek

  • Webcam node not created

    Hi, and first of all, sorry for my english.
    I've got a working tv card with node /dev/video and /dev/video0, and a webcam that should be at /dev/video1, but it's not.
    [samuel@arch ~]$ ls -l /dev | grep video
    lrwxrwxrwx 1 root root            10 mar 18 12:13 video -> v4l/video0
    lrwxrwxrwx 1 root root            10 mar 18 12:13 video0 -> v4l/video0
    The webcam: (lsusb: Bus 001 Device 003: ID 046d:0928 Logitech, Inc. Quickcam Express) It's supported by the driver qc-usb and i've got working with that driver at another distributions and on arch too (15 days ago), I do the same but /dev/video1 it's not created.
    The driver is installed and loaded and I added c-qcam at MODULES array in /etc/rc.conf, same as last time, but the node it's not created.
    I use kernel26 (2.6.24-ARCH). ¿Maybe I need some module?
    When I connect the webcam, dmesg only says:
    usb 1-1: new full speed USB device using ohci_hcd and address 4
    usb 1-1: configuration #1 chosen from 1 choice
    My user is in the grup video too.
    I don't know what more to do. If you need more info just say it. Thanks for your help!

    I have a pl2303 Prolific USB to serial adapter (it's a gps mouse) and I'm having a hard time getting it working. It seems there is a problem with the driver pl2303 - it should be using pl2303x, but that's not included with the kernel. There are patches on the interwebz but they seem to date back quite a way and I haven't tried them.
    I found out from http://www.linuxquestions.org/questions … ce-614758/ that my device should use the pl2303x driver but then other threads say that the pl2303 driver has been updated in later kernels. Whatever, it's not working for me.
    Sorry not to be of help, but I'd be interested if you get any further with this.

  • Could not create the associated SICF node automatically.

    Dear Guru,
    I have Encountered an issue while creating a BSP application through SE80\BSP Application.
    while I am trying to create a BSP application ( for e.g with name ZSR_BSP_APP_01) it is showing following messge :
    SICF Node For ZSR_BSP_APP_01.
    Could not create the associated SICF node automatically.
    Add a node manually using "HTTP Service Maintenance"
    (Transaction SICF)
    After creating and activating all the pages of it  when i am trying to execute it is showing follwing error in Explorer.
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    BSP exception: Application sap/zsr_bsp_app_01 cannot be started. Create an application node using Transaction SICF.
    Error type:
    Your SAP Business Server Pages Team
    please guide how to resolve this issue
    how i should creade application node for the object ZSR_BSP_APP_01 using transaction Code SICF.
    Please guide me through the setp - by - step procedure to perform it.
    Thanks & Regards
    Saifur Rahaman

    findout the way to resolve this

  • Admin Tool can not create any new database or model [nqserror 46131]

    Hi everyone!
    I can not create anything new in each layer on the admin tool. It marks unknown error.
    When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
    Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
    OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
    Server OS: Red hat enterprise edition
    Regards,
    Edgar Tercero
    Edited by: 958457 on 11-sep-2012 12:04
    Edited by: 958457 on 11-sep-2012 14:13

    Thanks but it not solve my problem.
    I detect no problem in my enviroment variables in the bi-init.sh
    This is what my admin tool log says:
    [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
    [nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]]

  • Issue opening an existing model or creating a new model in VC 7.0

    Hi All,
    We have installed VC 7.0 and upgraded to EP 7 (SP08). We followed everything that was on the installation guide and have all the prerequisites installed both on the client and the server machine. We are on a Windows 2003 Sever and we have both MS XML Parser 4.0 and j2sdk 1.4.2_09. On the client side,we have both XML Parser 4.0 and SVG Viewer3.0
    The first time, I tried to create a model in VC 7.0, I could successfully create one. When I tried to open the model that I created, I was unable to do so. In addition, I could not create any more new models. The error I get in the message box while trying to open/create a new model is
    "Proxy Error: Server Error: Failed to load rules list of model"
    "Model root is bad or missing"
    Your help in this matter is greatly appreciated!.
    Thanks,
    Mansha

    Mansha,
    I was able to finally find the property, and this did solve my problem.  Following is a bit more detail on the fix, in case someone else runs into this problem.
    1) open the J2EE config tool from C:\usr\sap\XXX\XXXX\j2ee\configtool
    2) expand the instance node and press on the "server_XXX" node
    3) under the java parameters list in the right side of the screen add the following line:
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sap.engine.lib.jaxp.DocumentBuilderFactoryImpl
    4) press the Save Button.
    5) restart server instance
    Thanks!
    Regards,
    Brian

  • Can't install ORACLE RAC on Solaris (specified nodes are not clusterable)

    Hi all,
    Could you please help with the Oracle CRS issue?
    During the installation Oracle CRS the OUI indicate that the specified nodes are not clusterable.
    The window appears and displays:
    "The specified nodes are not clusterable.
    The following error was returned by the operating system:"
    I am using 10gr2_cluster_sol.cpio.gz file.
    My Solaris 10 configuration:
    server - sun3
    bash-3.00# cat /etc/hosts
    # Internet host table
    127.0.0.1 localhost
    10.160.19.49 sun3 loghost
    10.160.19.50 sun4 loghost
    10.11.12.13 sun3prv
    10.11.12.14 sun4prv
    10.160.19.64 sun3pub
    10.160.19.65 sun4pub
    bash-3.00# ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.49 netmask fffffe00 broadcast 10.160.19.255
    ether 0:14:4f:0:64:82
    bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
    inet 10.11.12.13 netmask fffffe00 broadcast 10.11.13.255
    ether 0:14:4f:0:64:83
    bash-3.00# cat /etc/netmasks
    10.160.18.0 255.255.254.0
    10.160.19.0 255.255.254.0
    10.11.12.0 255.255.254.0
    bash-3.00# cat /etc/hostname.bge0
    sun3
    bash-3.00# cat /etc/hostname.bge1
    sun3prv
    server - sun4
    bash-3.00# cat /etc/hosts
    # Internet host table
    127.0.0.1 localhost
    10.160.19.50 sun4 loghost
    10.160.19.49 sun3 loghost
    10.11.12.14 sun4prv
    10.11.12.13 sun3prv
    10.160.19.63 sun4pub
    10.160.19.62 sun3pub
    bash-3.00# ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.50 netmask fffffe00 broadcast 10.160.19.255
    ether 0:14:4f:0:41:c8
    bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
    inet 10.11.12.14 netmask fffffe00 broadcast 10.11.13.255
    ether 0:14:4f:0:41:c9
    bash-3.00# cat /etc/netmasks
    10.160.18.0 255.255.254.0
    10.11.12.0 255.255.254.0
    10.160.19.0 255.255.254.0
    bash-3.00# cat /etc/hostname.bge1
    sun4prv
    bash-3.00# cat /etc/hostname.bge0
    sun4

    0) This error occur when I run .runInstaller
    All prerequisites check passed. The error window appears after clicking Next button in Specify Cluster Configuration window.
    1) I have changed /etc/hosts file as you have mentioned
    SUN3
    bash-3.00# cat /etc/hosts
    # Internet host table
    ::1 localhost
    127.0.0.1 localhost
    10.160.19.49 sun3
    10.160.19.50 sun4
    10.11.12.13 sun3-vip
    10.11.12.14 sun4-vip
    10.160.19.64 sun3pub
    10.160.19.65 sun4pub
    SUN4
    bash-3.00# cat /etc/hosts
    # Internet host table
    ::1 localhost
    127.0.0.1 localhost
    10.160.19.50 sun4
    10.160.19.49 sun3
    10.11.12.13 sun3-vip
    10.11.12.14 sun4-vip
    10.160.19.64 sun3pub
    10.160.19.65 sun4pub
    Also I have configured bge0:1 interface
    bash-3.00# ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.49 netmask fffffe00 broadcast 10.160.19.255
    ether 0:14:4f:0:64:82
    bge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.160.19.64 netmask ffffff00 broadcast 10.160.19.255
    bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
    inet 10.11.12.13 netmask fffffe00 broadcast 10.11.13.255
    ether 0:14:4f:0:64:83
    2) I have removed loghost from /etc/hosts file
    3) Currently I do not have shared storage. I am going to use Storage Foundation to create a shared storage
    Also I was trying to test the machines using runcluvfy.sh command
    The output is the following:
    -bash-3.00$ ./runcluvfy.sh stage -pre crsinst -n sun3,sun4
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Node reachability check passed from node "sun3".
    Checking user equivalence...
    User equivalence check failed for user "oracle".
    Check failed on nodes:
    sun4,sun3
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    Pre-check for cluster services setup was unsuccessful on all the nodes.

Maybe you are looking for

  • JDeveloper 11.1.2.3, ADF Faces, JQuery Integration via ADF Library

    I cannot seem to get a consuming application to execute jquery's ready() function defined within a adflib application. Here is my setup directory structure of where my javascript files are: CommonApp -ViewController --public_html ---resources ----js

  • Siri not working while connected to Audi AMI

    it turns out that I cannot fully use the features of my iPhone while connected to a certified car audio system (Audi Ami). env: iOS (10a403), iPhone 4S ,audi q5 , ami hw h07,sw 0350, Bluetooth Nokia bh-202 issue: iphone connected to car through cable

  • Get right or bottom co-ordinate of a symbol

    Is there any way to get the right & bottom position of a symbol (without adding left to width or top to height)? thx

  • TS1559 wifi problem Iphone 4S

    I did that but nothing happen. Do you think i should change the wifi antenna or the wifi chip??? The truth is that sometimes my wifi works for a few minutes, hours but then again go grey.

  • Cf8 crashing

    we've got a new cf8 server and it is behaving very irratically at the moment. Currently I'm getting:- "Server Error Either the Macromedia application server(s) are unreachable or none of them has a mapping to process this request." Any idea whats hap