WebDav with changed folder

Hi together
I have enabled on my Mac mini server with OS X 10.6.4 WebDAV over SSL. Everything works fine.
What I missing or I do not know is, how to done the following:
I want the standard folder "Library\Web...\..." leave. In addition, I would like to access on the second internal hard drive a further folder. Can I do this with aliases and if so, what have i to do? Thank you for your help.
Regards
Hermann

I tried this with apache slide.
With no luck.
I think the problem was due to not being able to configure a servlet to
receive the http request for the urls from the web dav root.
For example.
http://mserver/dav
may be the root
then you would have a file at
http://mserver/dav/files/etc
I could not configure the servlet in the rules.properties file to say
/dav/* is servlets WebdavServlet.
However you can do this with tomcat and I hope now that iWS 6.0 supports the
web.xml for deploying servlets that you now will be able to do this.
If you get this working I would like to know how you did it.
Warwick
"herve Merdrignac" <[email protected]> wrote in message
news:[email protected]..
Hi,
I want use Webdav with Iplanet Webserver 4.1 for publication . It's
possible ?
Regards,
herve

Similar Messages

Is there any hope of apple adding a 're-link with media folder'-type function to iTunes?

Is there any hope of apple adding a 're-link with media folder'-type function to iTunes?
I have 1000s of broken links after installing the latest version of iTunes and updating some files in my media folder. The location of my itunes library has not changed, and all the files are there (I know because I've just waited several hours for the files to be updated by my ultra-slow computer) - by my logic, there should be some menu option that simply re-synchronises with the media folder, just like itunes would do with an ipod - it can't be that hard can it? The only way I can restore a link is by clicking every song (I have over 28,000) and locating the file in the folder that iTunes claims to use as its media folder - the new version 10 option of then using this location to restore all broken links doesn't work because it only looks in the specific album file, and after a couple of times this dialog box no longer even comes up, so I couldn't ask it to do this even if I wanted to. At the moment the only option I can see is to completely wipe iTunes and re-load all my music from scratch - using my tired and over-worked computer this will realistically take around 15 hours that I don't have, and my computer will melt in the process. I wish I'd never tried to 'tidy up' my iTunes library...
PLEASE Apple, how hard can it be to have a function that searches for and restores broken links by itself????? I've told you where the music is - just flipping look for it yourself instead of getting me to do it!

You don't have to re-rip, re-import or re-download all your content. You can clear the iTunes library, either by selecting all in the libary and pressing the Delete key, saying "no" when it asks if you want to remove the files themselves, and then use the Add To Library command, selecting the iTunes Media folder (or iTunes Music folder, as applicable to your situation), and that will add back all your content. It shouldn't take more than a few minutes; if it does, something may be amiss with your hard drive or the library file is corrupted (in which case just delete the library file and re-do the Add To Library command).
Regards.

Extremely annoying problem with user folder name in windows 8.1

Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)

Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now.

Show the report on the same dashborad page with the folder tree?

I add a folder in dashboard, and put it on the left.
now i open the folder tree in dashboard, and click a report,
but biee open the report on a new page.
I want to show the report on the same page with the folder,
maybe show the report on the right in the dashboard with the folder.
how could it be done?
thanks ,
newkoa

The only way it could work is using iframes. Now OBIEE 11g would not allow iframes inside it's dashboard. It offers a dashboard object called "Embedded content" which is a restricted iframe kinda thing but unless you get this object's id from generated HTML you can change it's content dynamically. Besides, such an implementation may break with next patch. So here is an idea.
Create a HTML page with two iframes, left one will hold all the reports with links (you can always generate a list of reports through catalog manager, open it in excel and make HTML links from it) that open report urls (in the format of ./saw.dll?GO&Path=....) in right iframe (using javascript open.window method). Once that page is working, call this page from dashboard using an action link. This is slightly twisted approach but at least it would give you what you asked for.
About making the report list dynamic, I am afraid there are no easy answers. OBIEE provides web service that will allow the users to query catalog to get a list of reports. You can try some basic JSP to access the web service and generate the list dynamically. But that is not something I can provide here.

Starting up Bridge with last folder

Bridge always opens with a folder I was working with last March--How can I get bridge to open at the folder and photos I was working with when I last closed down the program?

You have Bridge set to load on startup (adv. preferences). Therefore you will either have to disable this feature or close Bridge by using File/Exit. Just clicking the X and closing the window forces a exit of bridge without saving changes with this option checked.

My macbook pro has white screen with flashing folder.

my macbook pro has white screen with flashing folder.
i called the repair services and they say its hard disk problem
so i would like to ask everyone here if the problem would be solved if i just changed the original hard disk to a ssd myself or do i realy need to let them repair for me.
ps : i dont have warranty

See A flashing question mark appears when you start your Mac. I would suggest you try reinstalling OS X.
If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Changing Folder & File Permission via Java Program

Please help me with some Java Code on how to change Folder & File Permission on CM

Hi Christopher,
Perhaps this
Repository Service auto change resource permissions
thread might help you.
Regards,
Patrick.

Blue screen with flashing folder and question mark on startup

Hello.
I need help with my Macbook Pro. I get a blue screen with a flashing folder and a question mark at start up. To date I have tried the following:
Apple Hardware (Extensive) Test (Results: "No Trouble Found")
Safe Boot
Reset NVRAM
Reinstall OS X via the internet (I received no discs when I purchased it). I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear. When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk. Startup Disk could not gather enough information on the selected disk."
The only option is "Restart" from the Apple menu. When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
I have no Time Machine
I can't access the disc utility.
Are there any ideas as to what might be the problem?

Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

Finder automatically changing folder names...

Finder is automatically changing folder names... say I have two folders side by side titled:
Financial
Miscellaneous
Sometimes, and for no apparent reason, the "financial" folder will, when I click on it, change to "miscellaneous" and will show the exact same files no matter which one of the two I click on. I know for a fact that each folder holds two entirely different sets of documents...
What is going on here? How do I stop it from doing this?

We are experiencing this issue on both ppc and intel machines and it appears to be isolated to the Finder as the terminal reports properly. The commonality is network shares, it does not seem to matter if they are nfs automounted from solaris, smb mounted from a linux box, etc etc, nor does it matter if an admin user manually mounts these shares, the issue persists. I, like a previous poster on this subject was skeptical given the symptoms but kept an open mind and then witnessed this anomaly for myself. We can now re-create it at will. I have narrowed it down to the 10.4.9 update and it continues through 10.4.10, in my testing, the issue does not exist in 10.4.8. The Finder version changes from 10.4.6 in OSX version 10.4.8 to Finder version 10.4.7 in OSX version 10.4.9, the Finder versions do not coincide with OS versions. Swapping in the older Finder did not solve the issue so there are other culprits involved. It may not even be the Finder at issue, the issue may reside in the way OSX mounts shares and simply manifests in the Finder. Odd behavior to say the least, one good thing is that while the data appears to have gone away, it's actually safe and sound and a reboot/logout-login resolves the issue. Deleting .DS_Store, force re-launching the Finder does not seem to help nor does deleting caches, preferences, etc, the only solution I have found is to revert to 10.4.8.

Changing Folder Icon

I've a N82 phone, and I'm creating some folders, and needs to change their icons, will it be possible?in the folder option, no feature to change the icon.

hi m,
try to download new Themes with different folder icons, folder icons will be changed depending from the Themes motiff...

'Contacts' folder with sub folder cannot be removed after synching via iTunes

'Contacts' folder with sub folder cannot be removed after synching via iTunes
I am trying to remove a 'Contacts' subfolder
ie Contacts < default folder
- Contacts Mysubfolder 1 < Trying to remove this subfolder folder
via my microsoft outlook onto my iPhone.
Despite not having 'Contacts Mysubfolder 1' on my PC's outlook after deleting it, it does not delete the subfolder in my iPhone.
I even restored my iPhone settings to the original via iTunes.
I also replaced my physical iPhone but still synching with my original Apple ID + iTunes on the same desktop.
All I did was after replacement of my iP, i setup my microsoft Exchange account, and there it was, the Contacts subfolder which is no longer around, appears on my iPhone contacts folder list.
My outlook is on Microsoft exchange and I am on iP 3Gs
Please help
Thank you

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
tt2

My macbook will not start. when powered up it goes to a blank white screen with a folder with a ? on it

When I start my computer instead of just going to the main screen it goes straight to a blank white page with a folder with a question mark on it that keeps flashing. What's wrong with it?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

Error while changing BOM with change number

Hi ALL, Please help me with followed error message, I am using ECM. I created ECR and converted to ECO and then released.
Object management record cannot be generated
Message no. 29046
Diagnosis
You want to change the BOM with the entered change number.
One of the following situations triggered this error message:
1. The indicator that allows automatic generation is not set for object type BOM in the change master.
2. The indicator generation only on initial creation is set for object type BOM
3. You are processing a change request.
System response
The system checks whether the indicator object management record will be generated is set in the change master.
If the indicator generation only on initial creation is set, the system checks whether the BOM exists in the system.
Procedure
If you are authorized to change the change master, execute the following steps:
For 1.)
Set this indicator for object type BOM or create the control record in the change master.
For 2.)
If the BOM already exists in the system and the generation only on initial creation indicator is set, the system can no longer generate the control record automatically.
In this case you have to add the object control record to the change master first, then you can change the BOM in relation to the change number.
For 3.)
You cannot generate any object control records for a change request.

Hi
With your question regarding changing BOM with change number it looks lke there may be problem in defining the Object types,objects.Moreover whenever converted to ECO you need to enter into cs02 tcode for changing the bom with relevant change number and valid from date.
Hope this gives you a clear idea.let me know if you need anyfurther inputs.
Regards
Praveen

WebDav with changed folder

Similar Messages

Maybe you are looking for