Webdynpro ABAP application on MSS Overview screen

Hi Guru's,
We are having a customized Overview screen in MSS which is all Webdynpro Java application.I am trying to add Webdynpro ABAP custom application link on the overview page.I created a IVEW ,then PAGE, assigned to Workset and then to role .
Copied the PCD location and assigned in the Resources of Homepage framework.
When I do preview it is fine but when I run it through Overview..I am getting 404 page error.
Again its webdynpro ABAP application in the Overview page..What are the steps for it ..I created Area,Subarea ,Services and assigned Resources which has the PCD location with ROLES:// ...
Also in Services I mentioned it as WEBDYNPRO ABAP application.
Please suggest me ay steps I may be missing.
Thanks,
ST

Also I was comparing the links through HTTP WATCH that was trying to read:
The first one is from direct page assignment under ROLE in Portal:
http://DEV SYSTEM/sap/bc/webdynpro/SAP/zhr_associate_form/;sap-ext-sid=bNrjr3FDhSA9HxracqUNhQ9H0Rpx1m12qVv5aAWcHbEw
The Second one is referred under overview from Homepage Framework:
http://DEV SYSTEM/sap/bc/webdynpro/sap.com/pcui_gp~xssutils/XssMenuArea/;sap-ext-sid=bNrjr3FDhSA9HxracqUNhQE37DBLWEEK_COBmuSIHeeA
I am for sure missing something ..can you please suggest.
Thanks,
ST

Similar Messages

Adding an ABAP Webdynpro app to the ESS overview screen

I am trying to add an ABAP webdynpro page to the ESS overview screen, I have managed to add URLs without a problem and have found a tutorial to add Java Webdynpro pages however this does seem to apply to ABAP webdynpro.
Thanks
J

Julian,
what problem are you facing in adding.
you can create an iview for the WDA application and in the HomePage Framework you can create resources and services which will point to that iview and add that service to the ESS Overview.
Thanks
Bala Duvvuri

How to Call the RFC in Webdynpro abap application

Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.

Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit

Popup for transport request in WebDynpro ABAP application

Hi there,
which function module can I use to prompt the user for the transport request in an WebDynpro ABAP application.
In SAPGUI I found 'TR_ORDER_CHOICE_CORRECTION' to do this but I get a short dump when I call this one from a WebDynpro ABAP application ...
Many thanks in advance!
Regards,
Steffen

Thanks for your replay!
The reason I get the short dump is the function modules I found call a dynpro screen inside for prompting for the request. I am not surprised this does not work for WebDynpro applications ....
So I thought there is a generic function module for WebDynpro applications available or a WebDynpro component I can use for this ... Sure I could build it by myself but this does not seem to be the right way for me since this requirement seems to be of a generic nature.
@Gaurav: I am interested to bring up a generic popup for prompting for the request. So I cannot use the flags to suppress the screen ...
Best regards,
Steffen

Webdynpro abap application for HCM

Dear all,
In enterprise portal->Content Administration->PortalContent->Content provided by SAP->line_manager->Manager Self-Service->iviews->HCM-> there is a PCR application by name "personnel change request". this is a webdynpro java application.
I have installed latest business package of ESS/MSS. so there should be both dynpro java and dynpro abap application. kindly tell me that for the personnel change request PCR application in which package can i find the wendynpro abap application.
Regards,
Bharath

Dear Bharath,
I am no expert on the topic but i can definitely answer your last question.
Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
Regards,
Sowmya
Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM

[HELP] Webdynpro Abap application keeps refreshing on Portal

Hello Gurus,
Im facing a really annoying and weird problem, i've created a screen exit on the transaction IW21, on this screen i have a custom container, and im using the class cl_gui_html_viewer to show off a webdynpro abap application on this container. If i access IW21 via SAP GUI everything works fine, no problema at all. But once we've published this transaction IW21 on Portal something very weird happened, the webdynpro application keeps refreshing on every action done in the screen. I've entered on debug mode to verify if the program is performing the code to create the html object again, but the program pass in the perform only once. An example: when i click in save the program pops a screen to choose some characteristics and i can clearly see the webdynpro application refreshing under this screen, like if i press F5 on browser. As i said everything goes pretty much fine in SAP GUI, but in Portal keeps refreshing.
Anyone have any idea how can i solve this?
Regards,
Rafael

Are you calling ITS transaction and Webdynpro application is within this transaction?
Regards,
Nitesh

When m testing webdynpro abap application m getting this error help me to get solution

hi all,
when m testing webdynpro abap application m getting this error help me to get solution.
plz find the screen shot

Hi
I think you are using the IDES system, Can you check the services in SICF transaction. If the service is not activated you activate it again.
In this path you will find in the below path and try to check/activate the services relevant to the WDA stack.
sap/bc/webdynpro/sap

Open Webdynpro ABAP application from UWL

Hello Experts,
The requirement is we need to open the Custom Webdynpro ABAP application when the user clicks on the UWL tasks instead of ITS based screen.
We have created a custom workflow task. Then we maintained the task entry with Webdynpro ABAP application name in SWFVISU transaction.
After re-registering the UWL connector in Portal I could not find the Task ID in UWL definition. In UWL the task item is visible but could not open the task because the UWL could not identify the task no for this.
Am I missing something in the above steps?
Kindly help.
Kind Regards,
Nirmal Sivakumar G

Any thoughts on this issue guys?

Webdynpro ABAP application for specific Country

Hello Consultants
We have developed a custom Webdynpro ABAP application and the service is working alright.
The probelm is that this service is to be enabled only for one Country i.e. India and this should not be visible for other country users.
I have created resource, service and country-specific service for this application and linked the country-specific service to India. Even after doing this am not able to stop the availability of this service other countries.
Shall be thankful for an immediate response.
S. Chandrasekaran

Dear Bharath,
I am no expert on the topic but i can definitely answer your last question.
Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
Regards,
Sowmya
Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM

F4 help issue with Webdynpro ABAP application

Hi,
I am facing a strange issue with the F4 help in my webdynpro abap application.
I have few fields for Purchase Order and Line item on the screen and they have corresponding F4 helps associated with them.
When i select for F4 help, sometimes the screen simply blanks out and a white screen is displayed. When i refresh the screen and try the same scenario again, i can see the value list correctly.
This issue occurs very randomly with no specific pattern. If anyone else has faced this issue earlier, kindly let me know how to get rid of this issue.
Any pointers to resolve this issue will be helpful.
Note: I am using SAP version 702 SP09.
Thanks,
Ramanath

Hi,
we cannot help you from offline, you need to check the standard procedures like
SICF->is your application node is active.
FQDN->check fully qualified name is configured
You can also try to execute standard SAP application, if sap application also has problem running then you may have to get the help of BASiS people to look into that and raise a support ticket.
If sap applications are running and your custom developed applications are not running then look into this application if there is any URL parameters need to supply etc.

User Roles & Authorization to run 'WebDynpro ABAP Application scenarios'

Hi All,
I am developer and my user ID is having developer roles, so when i am testing
'WebDynpro ABAP Application scenarios' it is working fine.
Problem is when I am executing with enduser portal WWID's (i.e. WWID's are also defined as sap
user), 'WebDynpro ABAP Application scenarios' giving me dump in screen & in ST22.
Pls guide me what roles or authorization we need to assign to user ID's
who can use 'WebDynpro ABAP Application scenarios'.
URL for Webdynpro application is like : https://xxxx.yyyy.zzzz:/sap/bc/webdynpro/sap/ZPA_EXTENSION_U?ZDATA=10028705591320090406
ST22 Error when testing with portal WWID's
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PARSE_XML_SCHEMA" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Explorer screen error
Error when processing your request
What has happened?
The URL https://xxxx.yyyy.zzzz:/sap/bc/webdynpro/sap/ZPA_EXTENSION_U/ was
not called due to an error.
Note
The following error text was processed in the system QJ1 : Access via 'NULL' object reference not
possible.
The error occurred on the application server sapqj1ci_QJ1_78 and in the work process 21 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: PARSE_XML_SCHEMA of program CL_WD_ADOBE_SERVICES==========CP
Method: GET_SCHEMA_VERSION of program CL_WD_ADOBE_SERVICES==========CP
Method: CONSTRUCTOR of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Thx

Please refer to thread [Authorization Error|WDA adobe error] where various solution to the problem specified by you are described.
Regards
Rohit Chowdhary
Edited by: Rohit Chowdhary on Apr 7, 2009 9:41 PM

FPM Navigation - asking for Log on when calling WebDynpro ABAP Application

Hi Experts,
I want to call a Non FPM based WebDynpro ABAP Application from a FPM Component.
I have followed the method showed in the following thread by Rajkumar to call WebDynpro Application using URL.
[Launch transaction without launchpad|Re: Launch transaction without launchpad]
I could successfully call my WebDynpro ABAP application using this approach,
However when the application opens in new Browser , it asks for log on again.
Can anyone help me to avoid this log in screen.
P.S. --> Both the applications are in the same server.
Regards,
Ashish Shah

Hi Ashish ,
I am also facing the same problem , did you find any solution ?
Thank You,
Aman

Error in opening webdynpro abap application

hi All,
I am facing below issue in opening webdynpro abap application, this is first WDA application in production system, please help me in resolving this issue.
============================================================================
Error when processing your request
What has happened?
The URL http://grp.mysap.pg.com:9500/sap/bc/webdynpro/sap/zgpuvstapp/~ucfLOADING was not called due to an error.
Note
The following error text was processed in the system GRP : A request for server adln5412 has been sent to server adln5411; see Note 1364846
The error occurred on the application server adln5411_GRP_10 and in the work process 3 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system GRP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server adln5411_GRP_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server adln5411_GRP_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: BS6402 -l: E -s: GRP -i: adln5411_GRP_10 -w: 3 -d: 20100929 -t: 140306 -v: ERROR_MESSAGE_STATE -e: A request for server adln5412 has been sent to server adln5411; see Note 1364846
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================================
Edited by: brahmanandam ausali on Sep 30, 2010 4:11 AM

Hi Shibli,
I'm facing the same issue with the POWL only if called from a part of the network outside our country (Italy) so I think it would be a network configuration problem as you suppose. Can you explain us the configuration of the balancer and dispatcher to solve the issue?
Thanks
Mattia

Calling Portal iView from a WebdynPro ABAP application

Hi ,
I have a requirement where I need to call an iView in my portal from the Webdynpro application also existing in the portal.
Can anyone provide me the method with source code( if possible ) to call an iView existing in the portal from the WebDynPro ABAP application.
Best Regards
Sid

Hi Siddharth,
Well, I think you can go for Portal Navigation concept.
Please check the required source code in WDR_TEST_PORTAL_NAV Web Dynpro component. That will illustrate both Page based Navigation and Object based Navigation.
Hope that should solve your problem.
Regards
<i><b>Raja Sekhar</b></i>

Error in webdynpro(ABAP) application development

Hi,
I am very new in webdynpro (ABAP) application development. I want to create some application based on webdynpro ABAP for few Z- Report. What is the prerequisite to develop a application based on webdynpro( ABAP ) .Because when I am trying to create application in se80 and giving the related functional model name in wedynpro component field , I am getting the error like Web Dynpro Comp./Intf. ZOS_xxx_FM does not exist. How to proceed further?
Thanks,
Kundan

Hi,
Can you be more clear...
Please refer this link for Personalization-
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/719f42f2ff7e5fe10000000a155106/content.htm
Regards,
Lekha.

Webdynpro ABAP application on MSS Overview screen

Similar Messages

Maybe you are looking for