Webdynpro ABAP columns hidden in portal only

We have configured webdynpro abap application HRESS_A_CATS_1.
When we test from the backend, we see a delete column on the left and each day has a detail column as below:
When we launch from the portal, those columns are hidden:
Is there some personalization or customizing feature that I am missing?  I am not familiar with portal administration, could there be a parameter on the iView itself that is causing this to occur?
When I look over the shoulder of our portal administrator and he looks at the iView preview itself, the columns are there.
Something is hiding them, but not sure what it is....

The delete icon will not show up in the line of the favorite/templates, if no hours are recorded on it. There is no transfer to the backend either, unless hours are recorded on these working time attributes. also ensure note 1986356 is implemented for details column check CAC2 for the CATS profile attached to the user in CVR in Su3

Similar Messages

  • Webdynpro ABAP Caching Problem in Portal

    Hi All,
    We have developed custom applications using Webdynpro - ABAP, using FPM and accessing those applications through SAP Netweaver Portal 7.0. I have deactivated all the caching techniquies in Portal @ iview level and Page level, Portal Runtime and ContentFetch side, But still causing the same problem.
    I have a doubt, wether this is happening because of SAP Logon Caching @ SAP WAS system level. I have checked the SSO parameter settings in RZ10 Profile parameters. Our basis people have set both accept and create parameter value = 1. Is this causing issue?
    Or Is there any other settings which is required to do in Portal or SAP system level. Please let us know , really appreciate your value suggestions and help.
    Please find the below links, which im referring to...
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/d2/91553b4d53273de10000000a114084/frameset.htm
    http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/48/69eb40e8a607d6e10000000a42189c/content.htm
    Thanks in Advance
    PRadeep
    Edited by: Pradeep on Jan 28, 2009 9:10 AM

    The delete icon will not show up in the line of the favorite/templates, if no hours are recorded on it. There is no transfer to the backend either, unless hours are recorded on these working time attributes. also ensure note 1986356 is implemented for details column check CAC2 for the CATS profile attached to the user in CVR in Su3

  • Deploy Webdynpro ABAP application without logon portal

    We have a Webdynpro ABAP application bulit in ECC to deploy.  User wants to access the application via an URL on their webpage instead of logon SAP portal.  They do not want the application to show the portal header and navigation area.
    With the help of portal support, we created an URL iView to access the application with parameter NavMode=3 (e.g. http: //portal.xxx:8280/irj/portal/index.html?navigationtarget=roles://portal_content/mycompany/application.iView
    /WDApplication&NavMode=3).  This method can fulfill user's requirement.  However, we have to hardcode the Webdynpro ABAP application URL in the iView (e.g. http: //devep.xxx:8000/sap/bc/webdynpro/sap/WDApplication).  This will be a disadvantage because the URL will be http: //qasys.xxx in QA environment and http: //prodsys.xxx in production environment.
    Can someone suggest a solution to me?  We do not use NWBC. Thanks.

    Hi.,
    I think only after moving to PRD., the client will use the application rite.!! so u can directly give PRD url in ur iView.,
    If it is in application ., we can get Host and Port., but we have to hardcode the url., So I am thinking better to give PRD Url in iView.
    Thanks & regards
    Kiran

  • WebDynpro ABAP application issue from Portal after ECC 6 upgrade to SP14

    Hi,
       We have recently upgraded the Kernel, ABAP and Java stack of ECC 6.0 system to SP14. After the upgrade most of the WebDynpro ABAP applications doesn't load and just flickers when run from Portal as a WebDynpro iView, but they run perfectly fine when accessed directly using URL. These were running fine prior to the upgrade. Can someone suggest what can be going wrong.
       Will reward points for helpful answer.
    Regards
    Mukesh

    Hi Mukesh,
    As Gajendra said, restarting the service in SICF sometimes works for us, but not always.  We have also had to deactivate the entire Webdynpro node, and then reactivate it and all of the services below it.
    Obviously something changed in the SP, given that we now have to do this every time we create a new WDA application.
    Cheers,
    John

  • WebDynPro ABAP iView not picking Portal Theme stylesheet

    Hi,
    We are facing issues in integrating the WebDynPro ABAP application in Portal . The WebDynPro ABAP iView is not picking the portal theme. It is picking its actual color.
    We are in EP 6 SP 14.
    Can anyone let me know what can be the reasons.
    Best Regards
    Sid

    Hello,
    for the web dynpro for abap application you can create a application configuration. To create the configuration
    right click on the application -> create/Change Configuration -> and once you create the configuration, it will open up in browser and you can see 2 tabs structure and parameters
    In parameters tab you will find an option Force Use of External StyleSheet check the box and save the configuration. Once done with this process.
    Go to the iView Properties of the applications and set the application configuration name and it would take the Portal Theme.
    hope this helps.
    Pramod
    reward points if helpful.

  • Webdynpro ABAP application integration with portal

    Hi,
          Can someone provide me the complete documentation for
           1. webdynpro ABAP application development and
           2. webdynpro ABAP application  integration with enterprise  portal.
    Thanks...
    Kundan

    hi Kundan ,
    design pattern or paradigm followed by Webdynpro ABAP is
      MVC concept
               M-Model
               V- View
                C-Controller
    and cms with the advantages like Structuring the programming
         Creation of easily manageable application blocks
         Reusability of whole components
    for more documentation about WD ABAP , refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
    SAP netweaver provides the integrationof ESA , for integartion netweaver provides us wid the People Integartion
    refer
    http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
    as well
    I hope it helps
    rgds,
    amit

  • Restarting or Reloading Webdynpro ABAP(FPM) application in Portal

    Hi All,
    I have created a ABAP webdynpro application in FPM framework which is run in the portal. The application has got a roadmap that contains 7 steps. In the last step there is a button 'save and exit'. When the user reaches the last step and presses the 'save and exit' button, one popup will appear with a 'close' button. When the user pressed that 'close' button, the application should restart i.e., the user should be taken to the first step. I tried using the method 'NAVIAGATE_ABSOLUTE' where I hardcoded the PCD path which takes the user to the first step but it is not helpful ( All Relative navigation links and Detailed navigation links were missing in portal ) in my case as it is not actually restarting the application. Could anyone help me out in getting the application restarted in the portal on click of a button.
    Note: We tried with Exit-Plug as well, which is not applicable ( helpful) for portal integration.
    Please suggest.
    Thanks
    Deepak

    Hi Deepak,
    Well we have few webdynpro applications with multiple views, by design, on the last step after save, we disable all other button and display a new button called 'RESTART' with only available choice. On click of this button
    1. We initialize all the data of component.
    2. Clear stored variable parameters & internal table used by assistance class
    3. if everything was fine fire navigation to the FirstDefaultView of the webdynpro application.
    Thus its almost restart of the application.
    So design wise have a method  INIT_COMP  in the component controller of webdynpro component. and then at the last step when call to RESTART is made reinitialize all the data of your webdynpro component.
    method onactionrestart.
    wd_assist->reinit_my_obj_tables( ).
    wd_this->fire_to_v_Start_plg(  ).
    endmethod
    Greetings
    Prashant

  • Putting Webdynpro ABAP application on portal

    Hi all,
    We have SAP ECC 6.0 as the ABAP system and EP 7.0 SP 6 is the portal. I want to show a Webdynpro ABAP application on the portal which I have created in the ECC system.
    I have an created an application in the back end with the following parameters :-
    Webdynpro Component name :- ZTESTWEBDYNPRO
    Webdynpro Application name :- ztestwebdynpro
    I then created a Webdynpro ABAP iview with following parameters :-
    Application name :- ztestwebdynpro
    Namespace :- sap
    System :- SAP_ECC_SERP (this has been tested and is working).
    We also have SSO configured with logon ticket to the ECC system.
    But I am getting a "Page cannot be displayed" error when I execute the application.
    Any idea why this can occur?
    Thanks,
    Hari
    Message was edited by:
            Hari
    Message was edited by:
            Hari

    Hi Hari,
    So assuming you have tested the connection to the system,
    perhaps another service, BSP, ITS , whatever
    and that it is creating WEB DYNP ABAP iviews that is the drama.
    Under EP 7.0, be sure to choose Iview type WEB Dynp ABAP.
    the properties page with application parameters is:
    SYSTEM -> As created to access system, available in dropdown
    Namespace - > sap
    Application name ->     <your WDA>    case as created in SE80
    So it looks like you have entered correctly to me.
    Perhaps the portal Forum has more info if you have continued issues.
    regards
    Phil.

  • Integration of webdynpro abap into  portal

    Hi All,
    Can any one suggest me the procedure for integarting the webdynpro abap application into the portal .
    I tried searching the blogs and e learning but was unable to find the right one  as i am very new to portal .
    wants to know the process and settings to be done in the portal .
    It would be better if given in detail. or any blog or download where i can find the detailed procedure .
    Looking forward for your help . 
    Regards,
    Sana.

    Hi Sana,
    Check this online help documentation...
    http://help.sap.com/saphelp_nw04s/helpdata/en/27/96b9c8f14e7d498b90a674710dc9c2/frameset.htm
    Regards,
    Narendra

  • Webdynpro ABAP application for specific Country

    Hello Consultants
    We have developed a custom Webdynpro ABAP application and the service is working alright.
    The probelm is that this service is to be enabled only for one Country i.e. India and this should not be visible for other country users.
    I have created resource, service and country-specific service for this application and linked the country-specific service to India. Even after doing this am not able to stop  the availability of  this service other countries.
    Shall be thankful for an immediate response.
    S. Chandrasekaran

    Dear Bharath,
    I am no expert on the topic but i can definitely answer your last question.
    Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
    I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
    Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
    I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
    Regards,
    Sowmya
    Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM

  • Webdynpro abap application for HCM

    Dear all,
    In enterprise portal->Content Administration->PortalContent->Content provided by SAP->line_manager->Manager Self-Service->iviews->HCM-> there is a PCR application by name "personnel change request". this is a webdynpro java application.
    I have installed latest business package of ESS/MSS. so there should be both dynpro java and dynpro abap application. kindly tell me that for the personnel change request PCR application in which package can i find the wendynpro abap application.
    Regards,
    Bharath

    Dear Bharath,
    I am no expert on the topic but i can definitely answer your last question.
    Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
    I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
    Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
    I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
    Regards,
    Sowmya
    Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM

  • Display RSS flows in WebDynpro ABAP

    Hi,
    I was surprised that my search in this topic on "RSS" did not return any result.
    I need for a customer to develop a couple of WebDynpro ABAP screens (without any portal) and to display information coming from a RSS flow inside these WD4A screens.
    Any idea how to achieve this, standard solution preferred or via custom coding?
    Thanks
    Yann

    Your question isn't really Web Dynpro ABAP centric.  The process to consume and parse the RSS is indepent of the use of classic dynpro, BSP, or Web Dynpro ABAP as the UI.  You are probably just going to use the CL_HTTP_CLIENT class to make the HTTP call from ABAP and then parse the RSS with XML or an XSLT.  Brian McKellar wrote a nice blog on this some time ago.
    /people/brian.mckellar/blog/2004/06/25/bsp-programming-rss-httpclient-xml-xslt
    He does his output in BSP, but that part can easily be adapted to Web Dynpro.

  • Webdynpro ABAP iView Blank Page

    Hi All
    I have created Webdynpro ABAP iView in the Portals  by giving following parameters
    1) System
    2) application name :
    3) Name space :
    While previewing i am not getting any erros or even i m not expected output also,
    Anyone could pls  you tell what is going wrong.
    How can i check at backend for that application.
    Note: I am new to Webdynpro for ABAP.
    Help will be appreciated.
    Thx & Rgds
    -AW

    I have created Webdynpro ABAP iView in the Portals by giving following parameters
    1) System
    2) application name :
    3) Name space :
    what are the values you have given ??? namespace should be SAP.
    ensure that your webdynpro ABAP application works fine. Goto se80-> select Web Dynpro Comp. /intf. and type in you webDynpro COMPONENT name here PRESS Enter key.
    you need to know the webdynpro component that this Application is supposed to execute to test it in ABAP work bench.
    Greetings
    Prashant

  • Getting Pernr for WebDynpro ABAP application

    I am building a new WebDynpro ABAP application and I want to be able to get the PERNR for the user logged into the portal and this application.
    I have read some information on this forum about getting the URL or application parameters in order to get the userid or similiar parameters and to handle this within the Window in the HANDLEDEFAULT method of a WebDynpro ABAP application.
    I have looked into this and I don't think pulling information from the application parameters will work.  For example, I checked one of our current services for "Personal Data"  and when I go to the portal content administration,  application parameters, I don't see any reference to userid..etc.  I see Property ID, Property Category, Inheritance, End-User Personalization, and Property Description.  In addition, I do not see any information from the URL itself that I could use. 
    Here is the scenario.  The user logs into the portal using the 3 character Network id which in turn, I assume, gets their SAP userid and PERNR in order to retrieve all the HR infotype information for each service.  By the way, the service I mentioned above, "Personal Data", is written in JAVA, so I am not able to see how this particular service works or handles getting the userid and PERNR.
    Has anyone come across this scenario before and how was it handled in terms of getting the userid and PERNR?

    I was thinking that SY-UNAME would be available, but was not sure.  For some reason, I was thinking I was going to have to pass something from the applicaton parameters or some other method to my WebDynpro ABAP program..
    I am not the portal administrator so I have not yet added my WebDynpro ABAP program to the portal yet.  Once, it's added, I will check out the availablility of sy-uname.
    Thanks.

  • Webdynpro ABAP/Portal. Plugin HTTP connection issue on WaitingEventQueue.js

    Hello,
    We are experiencing a strange Portal Behavior with our Webdynpros. Our portal contains several iViews including some Webdynpro (ABAP) and some reporting transaction calls that use SAPgui for HTML.
    When portal is called for the first time and a user logs in, two connections of type RFC can be seen for that user in SM04 in our ERP system. All iViews work as expected. For example, calling the Time Management webdynpro closes one of the RFC connections and starts a new Pluguin HTTP connection. We can go back and forth between the welcome page and this Webdynpro with no issues.
    If we then select one of the reporting transaction codes, the portal launches the SAPGUI for HTML. Report retrieves and shows data, and then we close using the "Exit" button provided by the sapgui for HTML
    Next we try again to launch any webdynpro (abap), but SM04 shows that the new Plugin HTTP session gets stuck and spinning mid way, and will stay there. Refreshing the Portal screen with F8, navigating back and forth, logging off and on again has no effect. The webdynpros will not launch again. Only webdynpros are affected, any of the reporting transactions can be called successfully over and over.
    We have figured that deleting Temporary Internet files (we are using IE 7), and in particular by just deleting the WaitingEventQueue.js?XXXXXXXXXXX file, the system will break away from the spin loop and show the webdynpro again, but eventually it will get stuck again, and asking the users to delete their Temporary Internet Files every 5 minutes is not a workable solution
    I have reviewed the contents of this javascript file at different points during the test, and the contents do not change, so deleting the file and the recreate process must be resetting somehow the queue and allowing for a new correct communication.
    Is there a way to properly reset this event queue (for example from ABAP, when the webdynpros are reloaded) in order to avoid the spin loop?
    Thanks for any help!
    Andres

    Well, we got the issue resolved, so here is what we did, in case anybody is interested:
    Tested again our portal with multiple versions of Internet Explorer, in particular IE8 and IE6, the Webdynpro behavior was normal (no timeouts or locks). It even worked when we installed IE7 in a brand new machine and tried our portal.
    So we started suspecting if maybe the particular IE7 that we install internally (with specific settings and policies) may be the culprit. We took a desktop that was producing the timeouts and used the following options in IE7:
    Tools->Internet Options->Advanced(tab)-Reset Internet Explorer settings
    and, voila! the next time we ran there, the portal did not create any timeouts.
    We even asked our desktop support team to uninstall and reinstall IE7 in the same machine after we did the reset, and even after the re-install that the timeout problems did not re-appear.
    One of the things that the "reset" option does is delete the Add-ons used by IE.
    So as a last test, we took a machine that was presenting the problem and went to the Internet Options to disable all the add-ons (in the Programs Tab). The error disappeared.
    And even after enabling back all the add-ons, the error would not return.
    Conclusion:
    Without being able to pinpoint the specific add-on (or combination) that causes the problem, we suspect that some of them conflicted, causing IE7 to behave abnormally. Disabling them all, restarting Internet Explorer, and enabling them again, makes the WaitingEventQueue.js work as it should

Maybe you are looking for