WebI losing Mapping after BW Query element addition

We are on 4.1 SP1. We have this WebI on top of BW Query via BICS. After creating simple report, we added one element in BW Query and then changed data source and picked same query, NOW WebI has lost its mapping and there is no report.. Please see attached document and advise ,, Thanks a lot

Hi Faisal,
You should not have to use ChangeSource feature at all in this case, ChangeSource is intended for switching from UNV to UNX/BICS source or when you want to change Universe/BEx Query ...
Here you just want to have a refreshed Universe on top of same BEx Query, which should work fine already if you edit query in WebIntelligence. In background there is a transient Universe generated each time so it takes into account modifications brought to your Query. (this is similar to what a refresh structure and then publish to Platform would do)
Did you close your session before adding object and loading QueryPanel ? There could be some cache bringing same old Universe without leveraging your changes ...
To make it safe I would save WebI document, close BILaunchpad session, re-logon and edit document and finally load QueryPanel : this would make sure no previous resources are being used when editing document.
If you still have problems at this point then please create a ticket to Support to have it investigated.
Regards,
Loic

Similar Messages

Losing connection after canceling query

We have noticed that when we launch a long running query and decide to use the cancel button that the connection is lost/broken. To recover we have to first disconnect then reconnect. We are on 3.0.0.4 build 04.34 with latest patch applied. This happens when connected to 10g or 11g. The issue is on both the windows version and the standard java version that we are running on solaris.

I ran it by clicking on the large green arrow in the work space. I tried it with the thin client and also the fat client via tnsnames and both with same result. I went to the logging page and clipped the top entries but there were a bunch of the
'Warning, unhandled exception: Closed Connection' entries.
SEVERE     239     10408     oracle.dbtools.db.DBUtil     Warning, unhandled exception: Closed Connection
SEVERE     238     329     oracle.dbtools.db.DBUtil     Warning, unhandled exception: Closed Connection
SEVERE     237     14373938     oracle.dbtools.db.DBUtil     Warning, unhandled exception: Closed Connection
SEVERE     225     91371167     oracle.dbtools.db.DBUtil     Warning, unhandled exception: ORA-01445: cannot select ROWID from, or sample, a join view without a key-preserved table
SEVERE     146     0     oracle.ide.model.IdeSubject     Exception while updating observer[1]: oracle.dbtools.raptor.oviewer.recent.RecentObjectsPanel$1@1cf876
SEVERE     145     3     oracle.dbtools.db.DBUtil     Warning, unhandled exception: Closed Connection
SEVERE     144     324664634     oracle.dbtools.db.DBUtil     Warning, unhandled exception: Closed Connection

WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER

Dear Sir,
please any one can answer me as soon as possible its very urgent
WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER
I     As oracle mapviewer Chapter 8 (Oracle Maps) says generating our own Web based mapping application we are trying to generate our own maps for our own data contains in our layers like example boundary lines and roads and etc. and we are following complete example as described in Oracle Mapviewer Document Chapter 8.
Before this step we tried with demo data downloaded from OTN mvdemo. And we downloaded latest demo today itself from the OTN and imported into our database schema called mvdemo. And we copied all three jar files mvclient and mvconnection and mvpalette into our jdeveloper .
II.     We created a jsp to execute the following code from oracle mapviewer chapter 8 documents
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/customizable" prefix="cust"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jwcache.tld"
prefix="jwcache"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/html" prefix="afh"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/fileaccess.tld"
prefix="fileaccess"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jesitaglib.tld"
prefix="JESI"%>
<f:view>
<html>
<head>
<META http-equiv="Content-Type" content="text/html" charset=UTF-8>
<TITLE>A sample Oracle Maps Application</TITLE>
<script language="Javascript" src="jslib/loadscript.js"></script>
<script language=javascript>
var themebasedfoi=null
function on_load_mapview()
var baseURL = " http://localhost:8888/mapviewer/omserver";
// Create an MVMapView instance to display the map
var mapview = new MVMapView(document.getElementById("map"), baseURL);
// Add a base map layer as background
mapview.addBaseMapLayer(new MVBaseMap("mvdemo.demo_map"));
// Add a theme-based FOI layer to display customers on the map
themebasedfoi = new MVThemeBasedFOI('themebasedfoi1','mvdemo.customers');
themebasedfoi.setBringToTopOnMouseOver(true);
mapview.addThemeBasedFOI(themebasedfoi);
// Set the initial map center and zoom level
mapview.setCenter(MVSdoGeometry.createPoint(-122.45,37.7706,8307));
mapview.setZoomLevel(4);
// Add a navigation panel on the right side of the map
mapview.addNavigationPanel('east');
// Add a scale bar
mapview.addScaleBar();
// Display the map.
mapview.display();
function setLayerVisible(checkBox){
// Show the theme-based FOI layer if the check box is checked and
// hide the theme-based FOI layer otherwise.
if(checkBox.checked)
themebasedfoi.setVisible(true) ;
else
themebasedfoi.setVisible(false);
</script>
</head>
<body onload= javascript:on_load_mapview() >
<h2> A sample Oracle Maps Application</h2>
<INPUT TYPE="checkbox" onclick="setLayerVisible(this)" checked/>Show customers
<div id="map" style="width: 600px; height: 500px"></div>
</body>
</html>
</f:view>

<%-- oracle-jdev-comment:auto-binding-backing-bean-name:backing_mapPage--%>
III.     When we run this jsp it’s giving us following Two errors
1     Error:     ‘MVMapView’ is undefined
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
2     Error:     ‘themebasedfoi’ is null or not an object
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
Please let us know what could be problem as soon as possible. Very urgent
Please let us know where we can find Mapviewer AJAX API’s for Jdeveloper Extention
Thanks
Kabeer

I currently use parameters, and they are passed from the form to the report. Report is then generated based on a function returning ‘strongly typed’ cursor. The ‘strongly typed’ cursor in my case returns a record consisting of an orderly collection of fields.
This collection of fields is returned by another function that relies on the IF … THEN logic.
However, the number of IF ... THEN statements is quite large (currently 64 covering all possible combinations of 6 parameters available in the form).
I would like to avoid the large number of IF … THEN statements, and hope that there is a way of passing a string to a query, where the Dynamic SQL would in Select close and Where close reflect parameters passed by the form.
In addition to this I would like to avoid creating and populating a table or a view dedicated to the report, because this may lead to a conflict in case of multiple users concurrently generating reports with different choice of parameters.
Edited by: user6883574 on May 28, 2009 9:16 PM

Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down

Hello,
We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Any pointers how to do it please
Thanks
Krishna

Hi,
WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
Regards,
Loic

Changing datatype, afterwards Message-Mapping cannot produce target element

Hi,
we use PI/700.
I changed a working system by changing a datatype of an existing message (adding a new element). My interface mapping contains two mappings: an XSL-Mapping and afterwards a Message-Mapping.
My interface mapping looks like this:
Message-Type A ->
XSL-Mapping ->
Message-Type B ->
Message-Mapping ->
Message-Type B
When I test each mapping alone everything works fine (with the new element I added).
But if I test my interface mapping in IBD with both mappings together, I'll get an error:
"Cannot produce target element /MT_EDM_OUTBOUND_LASTGANG_TO_SAP/LASTGANG/MASSEINHEIT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd".
Is it possible that XI has problems in refreshing the XSDs?
I tried this:
(1) I changed my Message-Mapping and now all elements are mapped 1:1 -> no success!
(2) Later I changed my Message-Mapping and build in "exists" with "if" to check whether the element "MASSEINHEIT" is generated by the XSL-Mapping -> It doesn't exists (??? - WHY? - when I test it, everything works fine)
(2) Afterwards I changed my interface mapping and take only the XSL-Mapping (without the following Message-Mapping) -> the element "MASSEINHEIT" exists now!
I'm totally confused!
Any ideas?
Regards
Wolfgang Hummel

Hi,
If you have made structural changes to the data type..such as number of fields have decreased/increased..or some new fld altogether, then you have to activate the datatype..goto message mapping and then re-do the mapping...but if you have made "typo" changes like names have been changed, etc..then i think it should be alrite..i have sometimes made changes to my datatype, but after activating it, i had to redo the mapping..that was it!...the rest would fall into place:) No changes had to be made in the interface mapping..
Regards,
Sushumna

BPM Message Mapping: "Cannot produce target element /ns1:BAPI...."

Hi,
A scenario File - BPM - BAPI call was developed, as described in blog 'RFC scenario using BPM' cfr. link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
The Mapping is as follows:
MT_EDB_MATERIAL_REQ (1:1) --> BAPI_MATERIAL_EXISTENCE_CHECK (1:1)
MATNR (1:1) -
> MATERIAL (1:1)
When executing the scenario, an error appears in the trace of SXMB_MONI, step 'Request Message Mapping'
Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
I tried the following:
1) import the XML-file into the testmapping: executed successfully
File:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_EDB_MATERIAL_REQ xmlns:ns0="http://agfa.com/SD_EDB">
<MATNR>15P6X</MATNR>
</ns0:MT_EDB_MATERIAL_REQ>
2) Removed the mapping on node level and left mapping only on element level (material): same error
3) Activated the message mapping, interface mapping, determinations, etc again...:same error
4) Removed the Interface Mapping and created it again: same error
5) Compared the version ID of the Interface Mapping/message mapping in the Monitor trace with the version ID of the IR and saw that there was a difference.
After the CPA full cache, SXI_CACHE full refresh and object refresh in the IB Administration, the differences remain, and also the error....
Anybody an idea ?

Hi
>>>Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
The error clearly says that one of the occurrence value for the target node mentioned is not coming from the source during mapping. The easiest way to solve the problem is as follows
<b>
First Execute the mapping as pointed out by "Raj" and the following steps.
</b>
1. Goto the Mapping Editor
2. Double click on the target node that is causing the problem here BAPI_MATERIAL_EXISTENCECHECK.
3. Right click on the same node and select "DisplayQueue".
4. View the Queue.
5. YOu will find "Suppress" entries, which means a value is expected but no value is coming in.
6.Go from right to left and check each node in the mapping and you will be able to trace where the suppress node comes from and take appropriate action
regards
krishna

WSDL generated by web service map

Hi,
I am totally new to ODSI. I noticed that the WSDL generated by the Web Service Map for a Data Service always contains two schemas in the types section, with an import directive in the first schema which refers to the second. The structure of the types section is something like this:
<types>
<xs:schema>
<xs:import namespace="N1">
</xs:schema>
<xs:schema targetNameSpace="N1">...</xs:schema>
</types>
The question is : is it possible to have a single schema instead of two in a logical data service? In other words, to what extent can the WSDL be customized?
I apologize in advance if the question is dumb, but as I have said, I am totally new to this product.
Thank you very much for your help
Alberto

The request and response elements will always be generated in the form below. It cannot be customized.
<xs:schema targetNamespace="ld:hello_ws" elementFormDefault="qualified" xmlns:stns="ld:hello_ws" ... >
<s:element name="HelloWorld">
<s:element name="HelloWorldResponse">
</>
Unless the targetnamespace for your logical data service matches, there will always need to be a second schema element.
Your logical dataservice can have whatever schema you want.

Web Service mapping file

You will be greatly appreciated if you can help me on following question:
In a web service mapping file, under <java-xml-type-mapping> element, either <anonymous-type-qname> or <root-type-qname> is valid element according to schema. My question is which one should be used under which situation?
Thanks,
Michael
===========
Mapping file
===========
<java-wsdl-mapping xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://www.ibm.com/webservices/xsd/j2ee_jaxrpc_mapping_1_1.xsd"
version="1.1">
<package-mapping>
<package-type>test</package-type>
<namespaceURI>http://test/</namespaceURI>
</package-mapping>
<java-xml-type-mapping>
<java-type>test.Status</java-type>
<anonymous-type-qname>{http://test/}Status</anonymous-type-qname>
<qname-scope>complexType</qname-scope>
==========
Schema
==========
<xsd:sequence>
<xsd:element name="java-type" type="j2ee:java-typeType">
<xsd:annotation>
<xsd:documentation>The java-type element is the fully qualified class name of a Java class, primitive, or array type.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<choice>
<xsd:element name="root-type-qname" type="j2ee:xsdQNameType"> <xsd:annotation>
<xsd:documentation>The root-type-qname identifies the WSDL QName of an XML type.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="anonymous-type-qname" type="j2ee:string">
<xsd:annotation>
<xsd:documentation>The anonymous-type-qname identifies the WSDL QName of an anonymous XML type.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</choice>

I am stuck here with the same problem - don't know what to do with the (required) Mapping File.
Has anyone found out?
Please let me know.
Best,
Philipp
[email protected]

Possible fix for OS X 10.5.7, losing connection after sleep, restart

Possible fix for OS X 10.5.7, Airport, losing connection after sleep, restart, or cold reboot.
Issue: (For OS X 10.5.7 on iMac5,1, Intel Core 2 Duo)
=============================================
- After sleep, restart, cold reboot, even though cannot connect to Internet, but the AirPort bars are still full, as if connected.
- Losing Internet connection after sleep, restart, cold reboot.
Possible Fix:
1.Open Network Preference, click on the Location drop down list > Edit Location... > click on the wheel button > Duplicate Location.
a)Select this newly setup location; Use Diagnostic button to connect to the internet. Select Network or enter WEP password if necessary.
b)Test to make sure you can connect to a web page.
c)Go to sleep & wake up.
d)This time, the Airport bar will start to show correctly. Before, it will always be full even when not connected. Now there will be no bars or grey out when not connected.
2.On the left hand side of the Network Preference Window, there is a list of services, such as Airport, build-in ethernet, built-in FireWire, bluetooth, etc.
a)Click on the wheel button on the bottom of the service list; select Set Service Order...; move Airport to the top of the list.
b)Delete any services which you are sure that you are not going to use, such as Bluetooth, etc.
3.Pick one of the locations mentioned in #1, and make it sure it is connected. If not, use Diagnostic button. If you have to select Network or enter WEP password to connect, make it so.
a)Check to make sure you can connect to a web page.
4.Go to sleep & wake up. The Airport bar should be filled up quickly. Try to connect to a web page.
5.Restart computer. Test a web page.
6.Shut down & Start computer. Test a web page.
7.When everything is working fine, you can delete the extra location that you created in step #1.
8.Click the lock on the left lower corner of the Network Preference window to safeguard the setting.

If my assessment is correct, the LIDE 200 driver is version 14.8.1 and dated 26-Sep-2008. It is possible that the driver will not work with the latest version of OSX. I would advise that you contact Canon and ask them the question.
(Removed link because of the way Flash drives the Canon site).
It is not uncommon (though irritating) that devices no longer work when an OS is upgraded. One has to ask the question if (or why) the driver was not written in such a way as to be OS version independent.
Chris
I spoke to Canon over here in Australia. Not helpful at all. In fact they were about as useful as an ashtray on on motorcycle. Having said that the tech seemed to think that there would be an update soon. But that is assuming that Canon are aware that there is a problem with that Scanner under OS X 10.5.7.
Message was edited by: 2point5

Saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

None of my pictures that I uploaded into iPhoto are in my Finder under Pictures. Should I copy and paste my folders from iPhoto into here, in case something happens to my iPhoto program (in addition to backing them up onto an external hard drive like I already do)?
No, that's just wasting space. A back up needs to be on a different disk.
Your photos are within the iPhoto Library.

Table that can give information about Query element

Hi All,
Please can you help, is there any table which can show the query elements belongs to which Query or Object.

Hi Sulochan,
You can go to rsa1 - Transport connection and select the webtemplate there. It would show you all the elements in the template along with their technical name. That should be of help. Else, you can copy and paste the technical name in the following tables and check if they are present in it.
RSZELTDIR                             Directory of the reporting component elements
RSZELTTXT                            Texts of reporting component elements
RSZELTXREF                          Directory of query element references
RSRREPDIR                            Directory of all reports (Query GENUNIID)
RSZCOMPDIR                         Directory of reporting components
RSZWOBJ                              Storage of the Web Objects
RSZWOBJTXT                       Texts for Templates/Items/Views
RSZWOBJXREF                     Structure of the BW Objects in a Template
RSZWTEMPLATE                   Header Table for BW HTML Templates
Hope this helps.
Regards
Snehith

Refresh Webi reports automatically after BI data loads ?

Hello,
We are about to install BOE X.1 on top of BI 701.
The idea would be that the users would perform their WebI daily reporting, but obviously only after SAP BI night batch scheduling is finished, and the BI infoproviders filled.
I've read that BOE ofers you the ability to refresh the reports upfront.
We were wondering if there is a way to easily implement this logical dependance : to refresh the Webi Report only after the end of BI data loads.
There is off course, the possibility to use an external scheduler, but we have checked the licencing and it's quite expensive.
Is there another way to do so ?
Many thanks for your attention.
Best Regards.
Raoul

Hi Alan,
Thank you very much for your quick answer.
I would like to make sure that I understand you since I'm not very familliar with BOE :
First , we create an event in the CMC and connect it to a file location
Then we schedule the document and add the file event : do you mean schedule the webi report ?
Finally create the file as part of the Bex query refresh process : how exactly do we do that, in the BI process chains ?
Thank you very in advance for your help.
Best Regards.
Raoul

How to find all query elements inside a Query

Hi,
I would like to find out all query elements inside my query.
Is there any table which stores all query elements inside my query ?
Thanks
Pratyush

Hi,
Query elements are stored in this follwing table:
SE11
Table name : RSZELTXREF [Directory of query element references]
other query related tables :
Tables used in Queries
RSZELTDIR      Directory of the reporting component elements
RSZELTTXT    Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR     Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE    Selection specification for an element
RSZSELECT    Selection properties of an element
RSZELTDIR     Directory of the reporting component elements
RSZCOMPIC    Assignment reuseable component <-> InfoCube
RSZELTPRIO   Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC        Definition of a formula element
RSZCEL           Query Designer: Directory of Cells
RSZGLOBV     Global Variables in Reporting
RSZCHANGES Change history of reporting components
Hope it will helps you.
Thanks
Hemav

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

A simple text page like this:
Heading
    sub heading
          text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
     <h2>sub heading</h2>
          <p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

How To Delete Multiple Query Elements in a Transport

Guys,
How do you delete Multiple Query Elements in a transport in DEV? Or it's not posible. I tried to select multiple but only one is being deleted.
Thanks,
Recca

Hi Recca,
As Nanda said, just go to tcode SE03..Click Unlock Objects (Expert Tool)..Paste your TR number (one at a time) then click Unlock..
Go back to SE10 and delete your TR numbers..
Regards,
Loed

WebI losing Mapping after BW Query element addition

Similar Messages

Maybe you are looking for