Webi report without measures
Hi All, I have a Sales order universe created on top of BEx query. When users are running webi report with only Sales Order and sold to party, webi is not returning any data. When I add a measure to this report it is returning data. From BEx I can run a report and getting data for Sales order and sold to party combination. Why is Webi not returing any data? How can I make my webi to work with these kind of master data combinations?
Thanks
Sasi
So are you looking for both master data and transactional data in the report? If it is just the transactional data you could build a dummy key figure EG: number of rows in the bex and pull into the webi report.
Similar Messages
-
Access table directly from database in BO 4.0 WebI Report without using Universe
Can i use the table avilable in database directly to make BO 4.0 WebI Report without create any universe.
I realy appeiciate your help.
Thank you in advance.You need to create a universe for Relational SQL databases. Universe is a must. The reason you create universe is for the end users. WebI is designed for end users to create their own reports. It is a self service reporting tool. In order to do that, you need universe which allows users to query database using SQL without knowing SQL language.
If you don't want to create a universe for reporting then you can use Crystal Reports instead of WebI -
Applying a filter to an existing webi report without requerying
Hi,
I'm trying to apply a filter to a webi report using the Report Engine Java SDK. Here's a snippet of my code:
DataProviders dataProviders = doc.getDataProviders();
DataProvider dataProvider = dataProviders.getItem(0);
Query queryObj = dataProvider.getQuery();
ConditionContainer cc = queryObj.getCondition();
if (cc == null) {
cc = queryObj.createCondition(LogicalOperator.AND);
ConditionObject co = cc.createConditionObject(filterObject);
FilterCondition fc = co.createFilterCondition(Operator.EQUAL);
FilterConditionConstant fcc = fc.createFilterConditionConstant(filterValue);
dataProvider.runQuery();
But my problem with this code is that it needs to query the data provider to refresh the report. And it has to requery the data provider each time I want to apply a different filter value like in the case of report bursting. Is it possible to apply a filter to the webi report without requerying the data provider?
Many thanks to anyone who could help.HI Elijah,
I need a bit of clarification here. Are you seeing the actual query being run against the database each time, or are you referring to having to retrieve the query from the dataprovider each time?
If you are actually seeing the query being run - then that is something that should be investigated, however with regards to just retrieving the query from the dataprovider - yes you do need to do that in order to apply a filter.
Thanks
Shawn -
WebI report without universe in SAP BO BI4.0????
Hi is it possible to create webI report without universe in SAP BO BI4.0???
If possible please let me know briefly how to do it, 4.0 is something new and I can't figure whether it is possible and if it is possible is it good practice to go without universe or with universe?you can create webi report directly against BICS connection or against personal data providers (using Desktop client )
you can find ore details in WebIntelligence user guide at http://help.sap.com/businessobjects -
Web report without userid and password
Hi Experts,
I exported a BW web report to excel spreadsheet and sent it through mail to others, When recepients tried to open that exported spreadsheet, It is prompting for userid and password. I dont want this to be happened and it should open without asking userid / passsword? Can any one suggest some clues onthis.Check to see if they are looking at the data or running the report. If they are running the report, then they will be prompted for the user id and password.
You can run the report for them and download the data only, then they will not get the prompts, however they will not be able to update the data or drill down.
Alternatively, you can use the Broadcaster to send out the updated reports directly to them.
Brian -
Filters from BEX Printed in Webi Report..URGENT HELP NEEDED
Hi Guys,
In bex query customer has been defined as filter. In webi when we created report using the bex query,It prompts for customer . How can we print the selected customer in my webi report Without using prompt summary().
We can't use User Response because its not a Webi query filter.
NOTE: we are using BOBJ 4.0
HassanHI,
Eventhough you have created variable BeX query designer.
User reponse will work ,
steps to achive,
1.open the universe build on (Bex query with customer variable)
2.you can find the filter symbol in universe for customer variable that you have created in bexx query
3. then copy the exact text eg:"select the customer" in universe for that filter
4.then in webi user reponse of that text. eg :userreponse("select the customer")
regards, -
Changing Webi Report Data Provider With Prompt
Hi All,
I am trying to change Data Source of a Webi Report using RESTful Web Services. Fo this I have referred code on Changing Dataproviders for a Webi Report using RESTful Web Services Post.
I am able to change data source for Webi Reports without Prompts but it is not working for Webi Reports with Prompts.
Can anybody help me??
Thanks & Regards
Swapnil KulkarniHello Swapnil,
In order to perform a change data source, you have to answer the prompts (like in the regular Webi UI). In this kind of case, RESTful webservice will send back the list of parameters needed after you submitted your target mappings. Then, you have to answer prompts and send all the information (mappings + prompts answers).
Does it make sense?
Best regards,
Anthony -
Hello expert,
I have some questions as follows:
(1) I want to design a webi report without drill down operation, how can I deactivate drill down feature?
(2) I want to use a colunm to represent the number of rows by some group criteria, such as for year 1999, number of rows by the year is displayed, how do I formula this column for the number of rows?
(3) I am not sure if I drill down on some block, drilldown operation will be effective in another block of the same report?
Many Thanks,Howdy bo zhang,
1. Click the drill button up in the top right in the Tool bar when editing the report.
2. =Count([[Date]]; All) In ([[Year]])
3. in InfoView, click preferences in the top right. Expand the Web Intelligence section. There's a tick box for 'Synchronise drill on report blocks'
For number two, read up on 'input and output contexts' in the webi functions manual: http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_webi_ffc_en.pdf
DG -
Hi,
In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
Is it BW problem or BO problem?
I checked in some other threads but it's not given solution.
Thanks,
ManjunathaHi,
Is it BW problem or BO problem? : BO
is it causing problem with hierarchly data only ? without hierarchies data is matching or not?
Post same in SAP BusinessObjects Web Intelligence .
Thanks. -
Data of measure is not seen in webi report when drill is disabled
Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill levelSeems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled? -
Drill function implemented on Measure object column in the webi report
Post Author: madan kumar
CA Forum: WebIntelligence Reporting
Hi,
I have a small issue in my project.(Maintenance Project)I created a measure object in the fact table of the existing universe and saved and exported to the repository. (Say Measure object is D where D = A-(B+C))I inserted the same object as a column between two measure objects columns of a existing WebI report.
The report has two hierarchies involved - each hierarchy has dimension objects involved.I have checked with the hierarchies to make sure that measure object is not involved.The scope of analysis is None for the query.Version is BO XI R2.
The issue is the Drill function is implemented on that particular new column.The drill function should be applicable only to the two dimension objects involved in the report.But this measure object column is also getting drilled once the Drill option is selected.I had to remove the drill optiion from the Measure object column.
Can anyone help me on this issue...
Thanks in advance...
Madan KumarSushil
Thanks for your reply. I did the date diff on the columns. It does not break into 3 different groups. I am using a function called previous on the date column. So the report is like this
DATE Pervious (DATE) Date - Pervious(DATE)
01-01-2008 01:06 Null
01-01-2008 01:12 01-01-2008 01:06 :06
01-01-2008 01:18 01-01-2008 01:12 :06
01-01-2008 01:24 01-01-2008 01:18 :06
01-01-2008 01:30 01-01-2008 01:24 :06
01-01-2008 01:36 01-01-2008 01:30 :06
Basically we are breaking on the Date - Previous ( Date) column which does not work. I am not sure if there is a way to break this. I even tried it in Crystal REports XI and it does not work their either. Any help with this issue with be greatly appriciated.
Edited by: Srinivasa Prabu on Aug 4, 2008 2:55 PM
Edited by: Srinivasa Prabu on Aug 4, 2008 2:56 PM -
How we can print directly a report without preview to a local printer in web
How we can print directly a report without preview to a local printer in web-environment, whith Oracle 9ias Report server release 6i patch 11.
The user want to print ticket, built by Oracle Report, without previuw on PDF format, in a web three-tier environment.
Please supply my documentation in detail and sample code if you can.Hello,
Take a look to the example provided in the note :
Note.253881.1 How to Create a Report With a Frame Only on the Last Page at a Fixed Position
Regards -
How to schedule a webi report in csv format without header?
I have a requirement to create scheduled csv reports without table headers? I am unable to do this from CMC. It gives the column headers by default in the exported csv file. However, in the webI rich client, I have an option to save the document as "CSV-Archive" which allows me to omit the column header.
How are these two options different and is there a way to get the "CSV-Archive" option from CMS?
Looking for your valuable suggestions.
Thanks
SukantoIs there a way to get the "CSV-Archive" option from CMS?
Customization of existing options or features in CMC is not available, it will become an enhancement request, you have to place this request in SAP Idea place.
WebIntelligence Rich client is a desktop tool, auto schedule of reports as .csv is not possible, save as CSV and save as to "CSV Archive" from Rich Client is a manual job.
BI launch pad, CMC are BOE Server components have the ability to auto schedule as .csv, as a default behavior column headers will be exported to CSV along with report data.
As a workaround, have a copy of original wibi reports in your webi reports you have to hide table headers and schedule them to save as .csv
To hide table headers:
Edit the report -> Select table block properties -> Chose 'Format Table' -> Under 'General' properties 'Display' options un-check "Show table headers" -
Measures goes suddenly blank in WebI report.
Hi,
I have a Universe based on a BeX Query on top of an ODS. My WebI-query on this Universe selects 8 dimensions, 2 details and 8 measure values. But when I show all of the objects in a report, the measure values are blank. If I remove one of the dimensions, all the measure values are shown.
Any ideas on how to fix this?Hi,
can you check two things - are the values shown after an additional refresh of the report ?
if so - could you check in the Universe Designer in the properties of the actual keyfigure if it is configured to do a "database delegated" summary ?
ingo -
How to create the web based report without enterprise portal?
Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish
Maybe you are looking for
-
After Effects CC wdm diver hungs
Hello,recently i downloaded the trial version of After Effecs CC 2014,at first i had problem with the audio rendering,and i asked for help for a couple of friends and this result on me uninstalling and instaling AE for...5 times,maybe less but not mo
-
How to control the measure based on the related dimension.
Hi Experts, In order to improve performance, I have created three kinds of time tables in DB,such as Year .Month, Day. Then import them into the physical layer in RPD, and combine them into one dimension in BMM. Actually, it has three level fact rela
-
Please help, My Mac will not open when I rtry to download something from the internet, a box with foreign language appears in the textbox?
-
FCPX 10.1 keeps losing libraries and I can't get them back!
Is anyone else having this problem? I have been editing footage. All in a library stored on an external drive. I stopped for the night last night, shut everything down properly. Today I power everything up and FCPX 10.1 only sees the libraries on the
-
OAS 4.0.8.2a Standalone installation on windows 2000
What should i use for DOMAIN NAME field during installation of OAS 4.0.8.2 on Windows 2000 without connecting to network or internet . i installed oracle 8.1.6 and OAS 4.0.8.2a on my laptop (OS - windows 2000 ). Installation was successful but i cann