Webi reports show status pending despite occuring in the past

When I go into Instance Manager there are lots of reports showing that are 'recurring' but the next scheduled run time is in the past. There are no errors appearing that I can see to explain why they haven't run.
The reports are generally scheduled for 7-10 in the morning. I have scheduled tasks which stop and start the SIA every evening and the reports seem to finally arrive at their intended rescipient when the SIA restarts.
We have: -
XI 3.1/Tomcat/Server 2003
Does anyone have any ideas? Thank you in advance.

There were absolutely no errors in WUAhandler.log on existing machines - all looked normal, which baffled me. Machines with newly installed SCCM client only had machine and user policy update, so could not check for Software Updates.
However, I through web searches, I found a solution on another discussion here:
https://social.technet.microsoft.com/Forums/en-US/1cefa9e0-a7f9-48d1-83b9-34d2293bab64/sccm-2012-r2-problem-with-device-deployment-user-deployments-ok?forum=configmanagerapps
Basically the issue was described as a "corrupt PADBID in the database". A SQL query code detects if the issue is present, and another SQL code fixes the issue.
What lead me to this fix was searching for this error in "CCMEXEC.LOG" online: "System task 'PolicyEvaluator_Unlock' returned error code 0x8000ffff".

Similar Messages

  • EM12c: Target SQL Server 32-bit shows "Status Pending"

    Configuration:
    EM12c platform:
    Oracle Enterprise Linux 6.2(x86_64)
    Oracle Enterprise Database 11.2.0.3 (x86_64)
    Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) (x86_64)
    Microsoft SQL Server Plug-In 12.1.0.2.0 deployed in the Management Server
    Target:
    Windows Server 2003 Standard Edition Service Pack 2 (32-bit)
    SQL Server 2005 SP2 (Standard Edition) (32-bit)
    Microsoft SQL Server Plug-In 12.1.0.2.0 deployed in the Management Agent
    Problem:
    EM12C: Targets > Databases
    The SQL Server 32-bit target shows "Status Pending"
    Verified the Target Agent Logs and found.
    D:\oracle\Middleware\agent_inst\sysman\log\gcagent.log
    2012-09-20 17:36:25,833 [14939:C578F997] INFO - Adding a new target [microsoft_sqlserver_database.mssql_peregrine.esri.com]
    2012-09-20 17:36:28,271 [15029:7DDB51EF:GC.DPExecutor2.57 (CDProps:microsoft_sqlserver_database.mssql_peregrine.esri.com:agent_host)] WARN - Found a row with more columns than declared for the metric for TargetID = mssql_peregrine.esri.com, Metric = OSType_Agent_DynamicProperty
    Row = Microsoft Windows Server 2003 Standard Edition,,C:\\WINDOWS,\\Device\\Harddisk0\\Partition2
    2012-09-20 17:36:28,583 [15031:1C41A703:GC.DPExecutor2.58 (CDProps:microsoft_sqlserver_database.mssql_peregrine.esri.com:win_host_name)] WARN - Found a row with more columns than declared for the metric for TargetID = mssql_peregrine.esri.com, Metric = OSType_TargetHost_DynamicProperty
    Row = Microsoft Windows Server 2003 Standard Edition,,,C:\\WINDOWS,\\Device\\Harddisk0\\Partition2
    2012-09-20 17:36:28,755 [15073:9240A7B9:GC.DPExecutor.27 (CDynamic:microsoft_sqlserver_database.mssql_peregrine.esri.com)] INFO - Target: [microsoft_sqlserver_database.mssql_peregrine.esri.com] is broken: Dynamic Category property error
    2012-09-20 17:36:28,755 [15073:9240A7B9] INFO - Target: [microsoft_sqlserver_database.mssql_peregrine.esri.com] is broken: Dynamic Category property error,Get dynamic property error
    2012-09-20 17:36:29,286 [15073:9240A7B9] INFO - Starting collection for target: [microsoft_sqlserver_database.mssql_peregrine.esri.com$12]
    2012-09-20 17:36:29,286 [14939:C578F997] INFO - >>> Reporting response: AddTargetsResponse (request id 1) <<<
    2012-09-20 17:36:29,286 [14939:C578F997] INFO - (end processing requests for OMS@[email protected]=>[134818747370001])
    Tried the following without success:
    - remove target and add target again
    Database Username (Required for SQL Authentication): sa
    Password of Database User (Required for SQL Authentication): ****
    Role (Optional)     
    System Password (Needed when SQLServer is at remote location): <empty>
    System Username (Needed when SQLServer is at remote location): <empty>     
    Connect Using Windows Integrated Authentication (Yes/No): No
    JDBC Driver (Optional): com.microsoft.sqlserver.jdbc.SQLServerDriver
    JDBC URL (Example : jdbc:sqlserver://<host>:<port>): jdbc:sqlserver://peregrine.esri.com:1433
    - Add Target don't let me fill the System Password and System Username, get message that says is not required.
    - Configure target, usernames/passwords are set correctly, it let me fill the System Password and System Username, but the Target still shows "Pending Status".
    - Oracle support: EM12C : Agents Show As Status Pending After Fresh Install [ID 1478880.1]
    EM12c: Agents > peregrine.esri.com:3872 > Agent > Resynchronization
    Still Target shows "Pending Status"
    Have you seen this problem before? Any suggestions?
    Thanks,
    Marcelo Marques
    Esri-Technical Manager

    Hi,
    https://peregrine.esri.com:3872/emd/browser/main/
    Displays the page:
    TargetType TargetName BrokenCode BrokenReason Status Version     RunTime Version Blackout Status     Severities     Schedule     CollectionItems
    Host     peregrine.esri.com     0     MONITORED     1     false     Severities     Schedule     CollectionItems
    Clicked on TargetName link "peregrine.esri.com"
    This table displays
    Target=(host,peregrine.esri.com)
    Metric Name Collection History Detail  Merged History  Metric Definition  Execution Descriptor Query  Row source trace  Row source statistics  Incremental Config State
    Response     ""     Response     Response     ""     Response     "" ""
    Click on "Response" links and see follow.
    Link column "Metric Name-Response":
    "The following exception has occurred:
         Process invocation failure: java.io.IOException: Cannot run program "echo": CreateProcess error=2, The system cannot find the file specified"
    Link column "Metric Definition-Response":
    This XML file does not appear to have any style information associated with it. The document tree is shown below.
    <metric metric_type="TABLE" metricLabel="Response" metricLabelNLSID="host_response" usageType="VIEW_COLLECT" keysFromMultiColls="false" test_Metric="false" keys_Only="false" long_Running="false" is_Config="false" is_Raw="false" is_Remote="false" is_Force_Cache="false" numCacheValues="1" is_Incremental="false" is_DeletionAllowed="true" is_Purgeable="true" isMetricExtension="false">
    <tabledescriptor anyComputeExpr="">
    <column column_name="Status" is_key="false" column_type="0" is_transient="false" is_timestamp="false" is_target_seperator="false" is_filename="false" is_clob="false" columnLabel="Status" columnLabelNLSID="host_response_status" replacedFetchedValue="false"/>
    </tabledescriptor>
    <QueryDescriptor cacheAggregation="false">
    <QD fetchletId="OSLineToken"/>
    <prop name="command" scope="GLOBAL" optional="false" content="echo"/>
    <prop name="args" scope="GLOBAL" optional="false" content="em_result=1"/>
    <prop name="startsWith" scope="GLOBAL" optional="false" content="em_result="/>
    <prop name="delimiter" scope="GLOBAL" optional="false" content="|"/>
    </QueryDescriptor>
    </metric>
    Link column "Row source trace - Response":
    Metric=Response
    Row source name     Table name     Operation     Row
    TableRowSource          Alloc     
    TableRowSource     Response     Start     
    TableRowSource     Response     Rewind     
    Timestamp = 2012-09-25T14:38:33.072-07:00
    Thanks, Marcelo.

  • When I expand the address bar it shows sites I have visited in the past, how can I clear this?

    When I go to my address bar and click on the small arrow to the right the bar expands to show sites I have visited in the past. The only problem is that these are sites I have visited a LONG time ago. I want to clear these sites and populate this drop down feature with more recent web sites I visit more frequently.

    Thanks so much! That was exactly what I needed. But I do have a follow up question; how is it that items end up in your location bar history?

  • There has been no signal in Springdale, UT for hours today. there is no way to contact Verizon (Calling or Web Chat). Service has been deteriorating for the past two years in the area. Worse fact is no one at the company seems to care. Right now the immed

    There has been no signal in Springdale, UT for hours today. there is no way to contact Verizon (Calling or Web Chat). Service has been deteriorating for the past two years in the area. Worse fact is no one at the company seems to care. Right now the immediate issue is no service. I cannot do business this way.

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • My laptop is stolen and hasn't showed up in my cloud for the past week but the name of it is changed.   How do I get it's last known location?

    My laptop is stolen and hasn't showed up in my cloud for the past week but the name of it is changed.   How do I get it's last known location?

    That"s part of my problem, I dont get that option.
    I get iTunes store and that's about it.
    I've thought about "erasing/resetting" all settings but I'm afraid to do it. Or am I
    missing something in iTunes?
    Help please!
    Joanne

  • HT1211 hd show i have downloaded them in the past and they work fine but now i cant buy any new ones it grayed out and wont let me click on them

    hd show i have downloaded them in the past and they work fine but now i cant buy any new ones it grayed out and wont let me click on them

    If you Go to the app store on your phone, then go to updates you should have a purchased icon at the top.
    Click on that and it will show the apps you have downloaded before as they are stored on the icloud.
    Then you should be able to click on the app and redownload it, not sure if it will charge but its worth a try.

  • Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

    We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
    The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
    the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
    all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
    So it seems that the issue only arises when we are sending to both internal and external addresses.
    I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
    longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
    So, I have two concerns:
    First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
    Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
    For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

    Hi Neil,
    According to the description, I find a related KB on Exchange 2010:
    https://support.microsoft.com/kb/2694474?wa=wsignin1.0
    It has the similar situation as yours.
    This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
    Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
    Also please check whether Throttling has been set.
    Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
    More details to see:
    Message throttling 
    http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Webi Report showing incorrect prompt from bex query

    Hello Gurus:
    I am facing a unique problem.
    I have a BEx Query which has a variable. I have built implement a BADI which restricts the variable values for the BEx Query.
    I have created an Universe on top of the BEx Query.  And I have created a webi Report on top of the Universe.
    The Webi Report when run does not use the Webi Prompt values, in other words it ignores the restrictions that I have placed on the variables. Instead it displays the whole list.
    Am I missing anything. Can some please help.
    Thanks
    EmJay

    Hi,
    select at least one key figure in the webi report and then try.
    Thanks,
    Amit

  • OEM: for 3rd party target it showing status pending and not getting up

    hi,
    I've develop a 3rd party plug-in for monitoring my application. After deploying that plug-in I'm getting status pending for my target instead of status up.
    1. not sure where is the problem. any help is this regard is appreciated
    2. if I update my plug-in xml file (default collection file) why it's not updating the schedule/threshold. Is there any need that if I've to update the schedule/threshold for metric through my custom script then I've to re-jar it and re-deploy it? Can't it be possible that I update the custom script file and reload the agent and OEM start capturing the metric info?

    hi,
    I've develop a 3rd party plug-in for monitoring my application. After deploying that plug-in I'm getting status pending for my target instead of status up.
    1. not sure where is the problem. any help is this regard is appreciated
    2. if I update my plug-in xml file (default collection file) why it's not updating the schedule/threshold. Is there any need that if I've to update the schedule/threshold for metric through my custom script then I've to re-jar it and re-deploy it? Can't it be possible that I update the custom script file and reload the agent and OEM start capturing the metric info?

  • Webi report - save as .csv is bringing double the number of rows.

    Hello all,
    I am running a webi report and then saving it as .csv file to my desktop but when I save the file it is giving me double the number of rows. In my report I have employee, employee key, attributes and Org unit and some measures.
    The .csv file has one additional column at the end which does not have any header and that column has "1" in the rows which should be legitimate and "0" in the rows which are so called duplicates, in these duplicate rows there is all data except it is missing the employee key and org unit key.
    If I save as excel I get the right number of rows.
    has any one seen this issue before?
    Thanks in advance,

    Exporting to csv is different from exporting to csv.
    If you have any filter on your crosstab or table and you export it to excel it will show you your data according to this filter.  Let's say in your table you have amount 0 and 1 and you filter that column so it will show only those records where amount = 1.  If you export it to excel you'll get what you see in your WebI report, that's only records with amount = 1.
    But if you export to csv the same Webi report with the same crosstab or table filtered by amount=1, the csv export will ignore this filter and your csv will include amount 0 and amount 1 records.
    I don't know if that's a WebI's  bug, but that's what has happened to me.
    A workaround could be adding your filter directly in the query pane, not filtering your table columns.
    Also check your query pane to see what object is bringing that extra column in your table.

  • Inventory status for a date in the PAST with BATCHES with VALUE

    Hi,
    How can I get a status REPORT of all inventory as on a date in the PAST with BATCH numbers and VALUE?
    The following ready reports do not solve my problem:
    1. Inventory Status: This gives CURRENT date inventory QUANTITY only.
    2. Inventory in Warehouse Report: This gives CURRENT date only, no BATCHES.
    3. Inventory Audit Report: Doe not give BATCH numbers and ignores qty without transactions.
    4. Inventory Valuation Report: Meant for "what-if" only.
    5. Inventory Posting List: Does NOT give BATCH numbers
    6. Batch Number Transactions Report: Doe NOT give VALUE.
    I suppose an SQL will be required for this requirement?
    Thanks,
    Ajay Audich

    Hi Rozario,
    Thanks for the pointer. Could you or anyone of the gurus out there have a code for doing this which will achieve this?
    Thanks,
    Ajay
    Edited by: Rui Pereira on Dec 9, 2008 5:08 PM

  • BASIC: Flat File Uploads to Web Reports - Notification Status

    Hi,
    I have excel based Notifications (Some legal cases) with their status in text format.
    I would like to show them on a WAD based report.
    Kindly suggest how I can do the same.
    Thanks in advance
    Pranab

    Pranab,
    you could upload them as documents if required and display the same.
    Otherwise - you can upload the same into MIME repository and use the template to display the same using the document Web Item.
    Otherwise you can have a BSP that uploads the data into MIME - the user could do this and then display the same in a BSP page instead.
    If security is not a big concern then you could upload the same into sites like zohocreator and expose the links on the web template - here the user can also update the status / change the excel files if required - something like Google spreadsheets..
    Arun
    Assign points if useful

  • ASM instance in the cluster shows status pending in grid control

    All,
    I have the ASM instance in separate home and the cluster database in another home .
    I am able to see the cluster database up and running in the grid control but somehow cant see the ASM instance .
    I will appreciate any pointers .
    thanks in advance
    Pk

    Try these two things:
    1) Deployments=>Refresh Host Configuration=>Select the hostname and then hit on "Refresh Hosts".
    If that doesn't work
    2) Targets=>Databases=>Select the ASM Instance=>Configure
    HTH
    Thanks
    -Chandra Pabba

  • Why does the visited link color change not work on some pages. this has only occurred in the past few weeks. 2 different computers Win 7 home pm Firefox 29

    On some sites the visited link color does not change. I have checked all settings and they have not changed. I can make the problem change by unchecking the "allow pages to choose thier own colors" box , but the some pages do not display correctly. Things worked fine up to a few weeks ago. I feel it may be a glitch in firefox 29.
    Windows 7 home premium SP 1
    Firefox 29

    Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
    *'''Windows/Mac''': Go to Help > Restart with add-ons disabled
    *'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
    If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.
    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *[[Image:new fx menu]] > Options/Preferences> Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *[[Image:new fx menu]] > Options/Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • Calendar only showing entries for two months in the past on my iphone.

    Calendar only showing entries for last two months on my iphone. How do I get full history of calendar?

    Brian,
    Go to Settings>Mail, Contacts, Calendars>Calendars>Sync>"All Events"

Maybe you are looking for