Weblog server licensing and 11.2 grid oms psu ?
Hello all,
I had couple of questions( i have already tried searching in the oracle docs and metalink notes, but could not find anything on it). First thing, looks like oracle 11g OEM Grid requires a Weblogic server. Which is fine, But wanted to know do we need to pay extra for this or is it part of oracle 11g OEM Grid diagnostic pack licensing?? If so, i was looking for a official answer (metalink doc or oracle doc)
Also another thing that I was curious was OMS? Is OMS only at 11.1.0.1.0 version or can this be upgraded to oracle 11gR2? As from below link, i only see 11.1.0.1.0 software.
http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
The thing that confused me was this link below. As in the below doc, it says to apply patch 10270073 to OMS home(psu patch). So i was wondering, after PSU patch is applied. Is the OMS going to be at 11.2.0.2.1 ??
http://camoraict.files.wordpress.com/2011/02/install-oracle-enterprise-manager-11gr1-on-oracle-vm2.pdf
Patch 10270073
11.2.0.2.1 Patch Set Update
Enterprise Manager Restricted-use License
•Enterprise Manager includes a restricted-use license of the Oracle Database for use as the Oracle Management Repository only.
Additional database options or additional servers for disaster recovery require separate licensing. Customers receive one single-instance database with the Grid Control, or RMAN, repository. To protect the repository with Data Guard, customers need to purchase a license for the standby site. To protect the repository with Oracle Real Application Clusters, customers must license the second node for the database, and both nodes require an Oracle Real Application Clusters license.
•Use of Oracle WebLogic Server with Oracle Enterprise Manager is restricted to the servlet functionality without clustering for the Oracle Management Server (OMS).
CHECK http://download.oracle.com/docs/cd/E11857_01/license.111/e11987/overview.htm#sthref10
Regards
Rob
Similar Messages
-
Server license and capacity license??
can anyone tell me where to get capacity license??? I had just registered an account in the VMware website,then I downloaded the stagemanager software and obtained a evaluation license.but when I installed and configured stagemanager, I found that it needed two license--server license and capacity license, I only have such a evaluation license, what can I do?
my stagemanager version is 1.0.0
when i open the configuration page,it prompted me to type in two license code,server and capacity.
but i just downloaded the software with evaluation mode,and vmware automatically gave me one license
i have two esx servers,each has two processor -
How can I tell my current Weblogic server version and Service pack
Hello,
I was wondering how can I tell what my current
weblogic server version is and what service pack
it is at.
Thanks.use 'java weblogic.version'
ensure weblogic.jar is in the classpath -
Weblogic server License infromation
I have the Weblogic server 9.2 version License,
Now Should I have to purchase new License for the *9.2 MP2 ?*
I have the License for the 9.2 , but I do not have the License for MP2, From where can I get the same ?
should I go for the ,
BEA WebLogic Server Advantage Edition
or
BEA WebLogic Server Premium Edition
or
BEA WebLogic Server Mid-Market Edition
What the difference between , above 3 edition ? which one to consider for Development / UAT / PRODUCTION Environment ?
Thanks,
Edited by: user10511751 on Feb 27, 2009 10:57 AM
Edited by: user10511751 on Feb 27, 2009 11:00 AMHello Experts,
Is there any forum I can get the answer of following,
1) I have Weblogic 9.2 License , How to get the 9.2 MP2 ?
2) Weblogic One license can be used on one machine or it can be used on multiple machines ?
3) Is there any time limitation of Weblogic Licenses ?
What the difference between.
BEA WebLogic Server Advantage Edition
or
BEA WebLogic Server Premium Edition
or
BEA WebLogic Server Mid-Market Edition
For Documentum Web Application Is any one have Idea about the which one Edition of Weblogic is supported or used ? I have to purchase Weblogic License.
Thanks, -
Weblogic server10.3.3 (Oracle Weblogic Server 11gR1) and sql server 2008db
Is SQL Server 2008 db supported for use with weblogic server 10.3.3
we use connection pools and XA and weblogic bundled drivers
we are planning an upgrade from 9.2mp3 to 10.3.3 weblogic server
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs103/103_over/supported_db.html#1179245
seems to indicate that only sqlserver 2005 is supported
Is there a more current version of the suported configurations that I am missing ?
Appreciate any feedback on this
Thanks
Best
Yeshwantcontact support for official policy. Technically, the drivers do support the DBMS version.
If you use any higher API than JDBC, there might be a question as to whether a
particulare API was certified with the latter DBMS version, but unless the DBMS
changed so it behaved differently than the previous for the same activity, then
there should be no problem.... -
FM Server License and Call Home
We currently are getting a message everyday for the call home that the Fabric Manager is grace period is going to expire in XX number of days. Is there any way to turn this alert off? This is annoying as we like the call home feature, but hate the NAG of the FM Server license.
A way to stop the Fabric Manager license nag message is to remove the license alert group from each call home destination profile.
To do this from the CLI, do these commands:
sh callhome destination-profile <-- note "alert groups configured"
conf t
callhome
destination-profile ?
User defined destination profile name (Max Size - 32)
full-txt-destination Configure destination profile for plain txt message
short-txt-destination Configure destination profile for short txt message
XML-destination Configure destination profile for XML message
destination-profile short-txt-destination alert-group ?
All This alert group consists of all of the callhome
messages
Avanti Avanti events
Cisco-TAC Events which are meant for Cisco TAC only
Environmental Power,fan,temperature related events
Inventory Inventory status events
License Events related to licensing
Linecard-Hardware Linecard related events
Supervisor-Hardware Supervisor related events
System Software related events
Test User generated test events
[For profiles with all alert groups configured:]
no destination-profile short-txt-destination alert-group all
destination-profile short-txt-destination alert-group Avanti
destination-profile short-txt-destination alert-group Cisco-TAC
[repeat for all but "License" for each profile]
[For profiles with License and other alert groups configured:]
no destination-profile short-txt-destination alert-group license
end
copy run start -
Exchange Downgrade Rights Server license and CALs
We currently are in the process of Migrating from Exchange 2003 to Exchange 2010 and then on to 2013. Mailboxes are being migrated on a weekly basis to the new Exchange 2010 server, Our Exchange 2010 server is just using an Eval license as our goal is
to stand up a new Exchange 2013 server and just continue the move from exchange 2010 to 2013. If we purchase an Exchange 2013 server license (guessing it will be volume license) will we have a license key that we can use with our Exchange 2010 Eval server,
im concerned we will not get everything migrated to 2013 prior to our eval license expiring. Also, how would we handle our CALS for this situation?Hi,
Agree with Steve’s suggestion, you won’t get the license key used by Exchange 2010 if you buy the Exchange 2013 license.
To choose the Exchange 2013 license version, you can refer to the following article:
http://office.microsoft.com/en-001/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
And here is a more reference about Exchange license common questions:
http://office.microsoft.com/en-001/exchange/microsoft-exchange-licensing-faq-email-for-business-FX103934581.aspx
If you have any question, please feel free to let me know.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support -
What is the difference between WebLogic Server users and Portal users
Hi All
What is the difference between users created in the WebLogic server and those
created from the webLogic Portal Admin console.
- leoHi Leo,
The WebLogic server console allows you to create users in the File realm (
http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1057106 , "Defining
Users" ).
The WebLogic Portal Admin console creates Portal users in the alternate security
realm that was written to store user/password in the Portal schema. This realm is
com.bea.p13n.security.realm.RDBMSRealm. See the javadoc for RDBMSRealm at (
http://edocs.bea.com/wlp/docs40/javadoc/wlp/com/bea/p13n/security/realm/RDBMSRealm.html
For information on alternate security realms see
http://e-docs.bea.com/wls/docs61/security/prog.html#1041025 , "Writing a Custom
Security Realm".
For information on the File realm see
http://e-docs.bea.com/wls/docs61/ConsoleHelp/security.html , "Security" and also
search the WLS 6.1 docs for "File realm" for lots of other references.
Leo wrote:
Hi All
What is the difference between users created in the WebLogic server and those
created from the webLogic Portal Admin console.
- leo--
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com -
Hi to all.
This is my first post on this forum. I've a problem parsing an xml document with JAXB. I've realized a web application that runs on WebLogic Server 11g.
This piece of code works fine in a standalone application and doesn't work in this one. A null pointer exception is thrown when I try to read iV.getVoucherBasiscCode. Have you got a solution for me. Some suggestion???
JAXBContext jc;
try {
jc = JAXBContext.newInstance("test.Bean");
Unmarshaller u = jc.createUnmarshaller();
JAXBElement<PropagateVoucher> j =
(JAXBElement<PropagateVoucher>)u.unmarshal(new FileInputStream("C:\\WebLogicLogs\\POL\\Voucher3.xml"));
PropagateVoucher ds = j.getValue();
VoucherIss vI = ds.getVoucherIss();
System.out.println(vI.getVoucherBasisCode());
System.out.println(vI.getVoucherIssuanceInfo().getInventorySegmentKey());
} catch (JAXBException e) {
e.printStackTrace();
} catch (FileNotFoundException e) {
e.printStackTrace();
Thanks a lot.
Edited by: 897151 on 14-nov-2011 8.56I start the weblogic server and finally it shows the following message, and I am sending you last three lines:
<Dec 10, 2011 9:08:07 AM AST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "wls_domain" running in Development Mode>
<Dec 10, 2011 9:08:07 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 10, 2011 9:08:07 AM AST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Now, tell me iis everything ok?
If ok then why the http://fmw11g:7001/ is not working.
Regards,
Waqas Hassan -
WebLogic Server Tuning and Performance
We are having a very strange problem. We have a domain called "ABC". Under that domain, we have three sites (applications) "x", "y" and "z".
"x" take about 80-85% of load while other two shares remaining 15% of the load.
When we have high traffic, "x" stops responding with thread stuck error and other two sites are still functional.
Any suggestion to tune? Here is thread dump.
Heap
PSYoungGen total 85056K, used 14066K [0x71800000, 0x77000000, 0x7c400000)
eden space 80320K, 15% used [0x71800000,0x7241fb90,0x76670000)
from space 4736K, 34% used [0x76670000,0x7680cdb0,0x76b10000)
to space 4480K, 0% used [0x76ba0000,0x76ba0000,0x77000000)
PSOldGen total 176128K, used 55761K [0x5c000000, 0x66c00000, 0x71800000)
object space 176128K, 31% used [0x5c000000,0x5f674520,0x66c00000)
PSPermGen total 102400K, used 100797K [0x54000000, 0x5a400000, 0x5c000000)
object space 102400K, 98% used [0x54000000,0x5a26f400,0x5a400000)
Thanks.In weblogic.xml specify 'precompile' parameter.
<jsp-descriptor>
<jsp-param>
<param-name>
precompile
</param-name>
<param-value>
true
</param-value>
</jsp-param>
</jsp-descriptor>
Christopher wrote:
> I have followed the instructions to mark the Precompile setting in the WebLogic
> Server Console via the document, "Tuning JSP Performance" and after restarting
> the server as required by the instructions I have noticed that the setting for
> the precompile JSPs option is no longer checked. Does anyone know what I need
> to do in order to keep the Precompile setting?
-
How to change WebLogic Server username and password ?
Hi,
As per this url Modify users . It says In the left pane, select Security Realms. But I did not find the SECURITY REALMS, I mean where is it located ?. Besides The following page http://192.168.100.11:7001/index.jsp also get open. Also the WEBLOGIC server login page opens as well here is the url http://192.168.100.11:7001/console/login/LoginForm.jsp
but when I type the given password it does not login. It gives the following messages
Authentication Denied
The username or password has been refused by WebLogic Server. Please try again.
Please helpIt says following even after giving the correct one. In the left pane, select Security Realms. Where is Security Realms is located ? How to get there ? so that i can change the password again as mention in this url Modify users
Authentication Denied
The username or password has been refused by WebLogic Server. Please try again. -
View weblogic server logs and application logs
Hi All,
Is there any way to view log files of Weblogic Admin Server, managed server and application logs through OEM console. ( In text editor-- full file / tail -f output)..
Thanks | KranthiThanks Rob.
Even from Weblogic Admin console we cannot view complete log file only some components are shown.
Just thinking will it be a good idea to execute shell script to view log file from Target-Execute Host Command.
-Kranthi
Edited by: 832458 on Feb 9, 2011 5:31 PM -
Weblogic server licensing question
We use jrockit 8.1 on a redhat as 3.0 linux machine with 2 xeon intel processors with hyperthreading. As suggested in the release notes (
http://e-docs.bea.com/wljrockit/docs80/relnotes/relnotes.html#1034906) I made the changes required to make jrockit aware of hyperthreading. Our license is for 2 cpus. However, when I run the top command it shows 4 cpus. Is this going to be a licensing problem with weblogic?
Thank youYou may call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist.
Microsoft License Advisor LINK:
http://www.microsoft.com/licensing/mplahome.mspx.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
WebLogic Server crash and Stack Trace Log
Hello? ^-^
Current system details:
SEQUENT Dynix/ptx v 4.4.7
Classic VM (1.2.1, green threads)
WebLogic 5.1
Apache 1.3.20
Current System crashes down too often and web service can not be available.
Heres a stack trace of the process when it has locked up.
The entire stack trace log file is...
http://members.tripod.lycos.co.kr/bach1685/dump.txt
Could it be possible to think this is the problem between JVM and OS library?
If this is a problem of OS, I think that Just changing OS could solve the problem.
How would I go about trying to figure out just where the problem is?
Thanks for readming my broken English...^^Make sure you have a supported platform -
http://www.weblogic.com/platforms/index.html
For JDK 1.2.1 - pay attention to what the platform page says about setting JVMARGS.
Mike
Kim, Jihun <[email protected]> wrote:
Hello? ^-^
Current system details:
SEQUENT Dynix/ptx v 4.4.7
Classic VM (1.2.1, green threads)
WebLogic 5.1
Apache 1.3.20
Current System crashes down too often and web service can not be available.
Heres a stack trace of the process when it has locked up.
The entire stack trace log file is...
http://members.tripod.lycos.co.kr/bach1685/dump.txt
Could it be possible to think this is the problem between JVM and OS
library?
If this is a problem of OS, I think that Just changing OS could solve
the problem.
How would I go about trying to figure out just where the problem is?
Thanks for readming my broken English...^^ -
How to resolve BEA KODO license on WebLogic Server
Using BEA Workshop Studio 3.2 you can create Kodo provided JPA project. As part of the project creation the BEA Kodo license (license.bea) file is included within Project/src folder, so that it is available in the classpath. While running the project on WebLogic server you might face license error "kodo.persistence.PersistenceException: No product license key was found..."
The fix for this issue is to merge the kodo license.bea content into WebLogic server license.bea file.
Edit WebLogic-server-Home\license.bea file
Edit Project\src\license.bea file, copy the content <license-group.. > .. </license-group> and paste inside WebLogic-server-Home\license.bea file NOTE: Paste the kodo license content within enclosing <bea-licenses> ... </bea-licenses> but outside of <license-group format="1.0" product="WebLogic Platform" release="xx"> tag.
With this you should be able to run the kodo project on WebLogic server.follow this doc http://docs.oracle.com/cd/E35287_01/fusionapps.7964/e14849.pdf
mark if it helps
Maybe you are looking for
-
How to mark clip in the timeline in order to find out how long it is fast?
I think it is a shortcut which marks the clip in the timeline with in point as the start and out in the end of the clip telling me the length accurately, but what is that shortcut again?
-
Unable to get Business Process in "Availability" KPI- SAP Engmnt Services
Hi, I have setup the SAP self service of KPI measurement. I have many productive solutions in my solman and BPMon is setup in many of the processes. But in the "Availability" KPI i am not able to get any business process for availability measurement.
-
after editing a pdf file with pdfedit, the pdf is showed correct in pdf readers like okular, epdfview, evince, freepdf, but NOT in Adobe Reader 9.4.2 ! A lot of characters are missing or changed. ie: text in german: 1) = original, 2) = Adobe Reader
-
I just got the HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work. I am using it with a HP Envy 23 inch monitor that also has Beats audio and an HDMI cord hookup. I have gone through all the steps on the monitor support
-
Difference in these two statements
DELETE BACKUP COMPLETED BEFORE 'SYSDATE-7' DEVICE TYPE DISK; DELETE OBSOLETE; Both of these are actually deleting files but I don't understand the difference. The retention policy is set for 7 days. Why is it necessary to run the first statement? BTW