Weblogic 10.3.2: Under load, system gives 404 error when accessing page
Hi all,
I am running Weblogic 10.3.2 with a J2EE EAR deployed against it. I am using JDBC data sources to connect to an Oracle 11g database. I am running on Linux Red Hat 5. The machine has 16 GB RAM and 16 cores of an Intel Xeon processor.
I have recorded some Grinder scripts to simulate the HTTP requests going back and forth from the web browser to the app server in an attempt to play them back in volume to do some load testing. I am finding that even under relatively moderate load, after some time (say 30-60 minutes) when trying to access the application in my web browser (and in Grinder), I am getting 404 errors.
The strange thing is that the app server is still running fine and there are no errors thrown in any Weblogic log file. There is nothing wrong in the verbosegc log file and the CPU usage via "sar" is very low. The number of JDBC connections is well below the threshold for concern. Sometimes, if I wait a while (hours or more), it sometimes comes back up and works fine again, until the next worjload hits it. I have studied thread dumps and see nothing unusual.
I've been very puzzled with this for days. Does anyone else know what might be wrong or something else I could check to get more information?
Hi, I have the same kind of problem. but when it happens I noticed strange line in the access.log like these ones :
access.log00003:192.168.104.198 - - [20/Apr/2012:12:16:45 +0200] "ancelActionID=CCACustomerProfile&contactreasonwrapuplaunchable=true&contactCode=&contactType=&contactInformation=&Customer.CustomerNumber=5146990&processheadertitle=&PageState.CaseNumber=&PageState.CaseReference=&caseId=42ceed6436cbd7c70136cf3ea82c3b4a&" 404 0
access.log00004:192.168.104.122 - - [20/Apr/2012:14:02:16 +0200] "s-xpsdocument, application/x-ms-xbap, application/x-ms-application, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*" 404 0
access.log00004:192.168.105.122 - - [20/Apr/2012:14:02:18 +0200] "-ms-xbap, application/x-ms-application, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*" 404 0
access.log00004:192.168.104.122 - - [20/Apr/2012:14:02:20 +0200] "application/x-ms-application, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*" 404 1214
As you can see, instead of containiing the HTTP action (GET/POST /someurl HTTP/1.1) it contains part of the url or even part of the Accept http header...
When your 404 happened did you have those strange entries in your access.log ? Did you succeed in resolving it ?
Similar Messages
-
SM2012 - Portal gives 404 error when opening KB article
In my System Center 2012 Service Manager demo environment, the portal bombs out the 404 error below whenever a user tries to open a Knowledge Base article. This happens with normal end users and administrators, and when done from the Help Articles
search page or from a Service Offering page. So far, everything else is working fine in the portal.
Does anyone have any ideas for troubleshooting this?
Server Error in '/ContentHost' Application.
The remote server returned an error: (404) Not Found.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information
about the error and where it originated in the code.
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
[WebException: The remote server returned an error: (404) Not Found.]
System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) +3236137
System.ServiceModel.Channels.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result) +216
[EndpointNotFoundException: There was no endpoint listening at https://MyFQDN.local/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +4728723
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +1725
Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result) +0
Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.EndExecute(IAsyncResult result) +323
Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ExecuteScalar(DataCommandScalar`1 command) +654
[DataAccessException: There was no endpoint listening at https://MyFQDN.local/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.]
Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.GetEndUserContent(HttpContext context) +1291
Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.ProcessRequest(HttpContext context) +287
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +625
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +270
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.272
Nash Pherson, Senior Systems Consultant, Now Micro - http://www.nowmicro.com <--- If this post was helpful, please click "Vote as Helpful".
I have the the same problem, when opening an KB article on the web Portal of SCSM2012R2:
[WebException: The remote server returned an error: (404) Not Found.] System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) +8606675 System.ServiceModel.Channels.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult
result) +222
[EndpointNotFoundException: There was no endpoint listening at http://myserver.xyz.corp:81/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present,
for more details.] System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +14543138 System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +622
Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result) +0 Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.EndExecute(IAsyncResult
result) +323 Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ExecuteScalar(DataCommandScalar`1 command) +654
[DataAccessException: There was no endpoint listening at http://myserver.xyz.corp:81/ServiceHost/Services/DataAccessService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more
details.] Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.GetEndUserContent(HttpContext context) +1292 Microsoft.EnterpriseManagement.ServiceManager.Portal.ContentHost.KnowledgeArticleHandler.ProcessRequest(HttpContext
context) +287 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +913 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165
But
http://myserver.xyz.corp:81/ServiceHost/Services/DataAccessService.svc
is responding fine. So the endpoint is listening, also the webservice is reachable
this is the actual url which is failing:
https://myserver.xyz.corp/ContentHost/ClientBin/KnowledgeArticleViewer.aspx?ArticleId=4517f8fb-520b-e2ff-635c-8196583a9a05
a call to
https://myserver.xyz.corp/ContentHost/ClientBin/KnowledgeArticleViewer.aspx?ArticleId=
responses with “unrecognized guid format”. so the webservice KnowledgeArticleViewer seems to be reachable. the GUID also is fine (checked with a runbook and this is the proper scobjectid)
seems to be independend of permissions, even members of the administators role have the same issue
any ideas?
regards
Manfred -
T-code CJ30,system gives an error of maximum time exceeds
Dear Sir
When we are executing T-code CJ30,system gives an error of maximum time
exceeds and some time the report is coming,we have exceeded the time
also but no outcome,since our project builder is not so
huge.Particulary we are facing in one project and rest of the project
takes lots of time.
Regards
Kunal JoshiHi,
Kindly write in the order of steps you have performed in the system.
with what you have written i got this:
You don't have big projects.
When you run CJ30, it gives time out error.
is this you want to say?
Regards,
Harsh.
Edited by: Harsh Saxena on Sep 10, 2010 2:40 PM -
Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.Windows or Mac, and exactly which operating system version?
-
Spectrum digital DSK5416 driver setup gives an error when test wizard is run.
Please help us with the following problem we are facing:
1. Spectrum digital DSK5416 driver setup gives an
error when test wizard is run. A snap shot of the same has been
attached.
2. The A/D module doesn’t pickup microphone signal or
an audio sample for loopback but the implementation of the same works
fine in CCS environment. (We are using Mic In and Speaker Out lines)
3. When a real-time application has run successfully
and if you close the VAB environment the application starts running
automatically until you reset the board.
4. We don’t find the flash program button enabled, so
that any real-time program can be burned into flash and demonstrate the
embedded feature.
Note:
We are using Windows Xp professional edition.
Program is developed using DSK5416Hello, I have included some information that will help address your questions: (1) I couldn't see the attached image file (contained errors). The RIDE/VAB DSK5416 Driver makes use of a JTAG communication when reading/writing memory on the DSK5416 hardware. You will need to make sure that the JTAG transfer option has been selected in the Driver Setup dialog box. The memory test process may seem to take a long time due to the amount of memory being accessed. (2) The VAB RTDSKAD block component provides a one-channel A/D input that makes use of the line-in channel on the DSK5416 hardware. (3) VAB does not remove the downloaded DSP executable program from DSK5416 memory, and it does remain resident. That being said, I wouldn't expect that the program would begin execution when VAB is closed. I would recommend that you verify that the DSP program stopped properly upon selecting the VAB Stop command. Then, close VAB as normal. (4) The RIDE/VAB driver for the DSK5416 does not support programming of flash memory on the DSK5416 hardware. Regards, Steve
-
404 Error when loading IWeb page
Greetings once again!
I have been using the IWeb program for setting up my business in nature photograhy and have passed out business cards that say web.mac.com/debo0063/iweb and people have been telling me they get 404 errors when they look up my site. I get that message sometimes at home but not most of the time. This is a problem because obviously I want people to come and visit my site. However, I don't know what to tell them about this either. Can anyone help me?
Thanks in advance for your help! It is greatly appreciated.
Sincerely, Dustin
Powerbook 17" Wide Screen Mac OS X (10.4.4) IWeb questionsTom, thanks for the information. I typed in my username incorrectly. It is as you stated--debo0062. And, thanks for the other information! I will let people know that it is a capital W on iWeb. Of course, I get a chance to figure this out after I get more business cards printed. Oh, well! That just gives me a reason to talk to them longer.
Dustin
I have been using the IWeb program for setting up
my
business in nature photograhy and have passed out
business cards that say web.mac.com/debo0063/iweb
and
people have been telling me they get 404 errors
when
they look up my site.
If you really printed them with "iweb" at the end,
that could be the problem. It has to to "iWeb."
Also your username seems to be debo0062, not
debo0063.
http://web.mac.com/debo0062/iWeb
seems to work ok. -
I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?
What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?
-
When i try to create Filter on aggregation level the system gives me error
Hi BI Guru's,
I am facing a problem BI - IP .
When i try to create Filter on aggregation level the system gives me follwoing error.
"Authorization check of component failed"
"You do not have authorisation for Add or Create".
"Could not create Filter "
Please let me know if have any solution for this
Thanks & Regards,
Nilesh LabdeHere are list of auth objects for BI IP
S_RS_ALVL --> aggregation levels
S_RS_PLSE -->planning functions
S_RS_PLSQ-->planning sequences
S_RS_PLST-->planning function types
S_RS_PLENQ-->maintain and display lock settings
Authorization templates for Integrated planning are
S_RS_PL_ADMIN
S_RS_PL_PLANNER
S_RS_PL_PLANMOD_D----
> Planning modeler(Dev System)
A portal role is required to use the planning modeler. -
Customer master XD01 system gives RUNTIME Error
Hi all,
While creating customer master xd01 system takes 10-15 minutes and gives RUNTIME Error.
can anybody explain it why system behave like this i spoken with my BASIS & ABAPer guy they also dont know the solution
Your help is required
Regards,
AbhijeetThis is not an SD or even SCN question. Short dump is just a result of time out, but this transaction should not be taking so much time as to time out. There are tools available in SAP to diagnose and troubleshoot the performance. I'm not sure how could neither ABAPer nor Basis admin know about them - you might want to raise this with IT management.
It's something that has to be analyzed in your system locally, not posted on SCN. -
/weblog/ is fine; /weblog gives 404 error
We've customized our VM and CSS files so that our blog's appearance is very much our own. We're ready to publicize now, but have a concern:
http://<servername>/weblog
Gives a 404 error, while
http://<servername>/weblog/
is fine.
We're worried that when people link to us, they'll omit the trailing forward slash, and wind up with a broken link.
Is there any way to change the Blojsom default URL?Make sure you have mod_dir enabled in your server:
http://httpd.apache.org/docs/1.3/mod/mod_dir.html -
My blog will not load--it gives me a blank white page.
If I type in my blog's URL I can see it fine. But if I try to login or search on it or go into the archives, it gives me a blank white page. Not an error code. Just a white page. I can see my favicon in the address bar.
I've tried it on FF and Safari. Same thing happens. I've tried it on other computers and the same thing happens.
I have asked my host to look into it, they don't know what to do. I asked my ISP about it and they said it's probably browser issues.
I looked thru all the help forums and altho' some people have this same problem not one of them had it resolved.
HELP.
aIn your WordPress administrative panel, try deactivating the WP Super Cache plugin to bypass any problems with cached pages. Similarly, scrutinize your other plugins to see whether any of them are not absolutely necessary, in case there is a conflict.
Then clear your Firefox browser cache and try again.
Firefox > Preferences > Advanced > Network > "Clear Now"
Any difference?
Edit: Oh... if you cannot log in, then it's hard to administer plugins, isn't it. You might need a WordPress doctor to explain how to make changes using an FTP client or your web host's file manager. -
JSP loading issue: HTTP 404 error
I have a JSP page that stopped loading up.
It gives me the Apache HTTP 404 error that it can not find the JSP page.
There are no servlet classes associated with the JSP page.
Simply, it is an HTML page calling a JSP page.
This issue appeared after we(IT team) incorporated servlets on the machine.
Directory structure changed, but it shouldn't have effected our JSP pages.
Directory structure
../wwwroot/Finance/Labor.html goes to ../wwwroot/Finance/Labor.jspAnd how does the HTML page invoke the JSP page?
Are you doing it via a <form> or are you linking to it through an <a href>?
You really didn't provide very much information. There are a lot of things that could go wrong. For example, Tomcat generally likes its JSPs to be in a specific place which is NOT the default Apache document root. You'd explicitly have to configure Tomcat to use the same Apache document root though.
Similarly, application specific Servlets are usually in a sub-directory of the one containing JSP files for that application. In other words, you don't really put JSPs in c:/JSPs on one machine, HTML in /home/rycherX/www on another machine and Servlets in \\rycherX\workspace\Servlets on a third.
The first place to start is to tell us what Servlet Engine you just installed. Tomcat? JBoss? WebSphere? -
Error when accessing Tuxedo Services from Weblogic
Hi,
I have a stateless session bean deployed on Weblogic 10.3.5 . I have a WTC Server configured to connect to my Tuxedo server.I have all the local and remote AP's set on this server also.
Now I am trying to access Tuxedo server from a method in my deployed EJB. Method looks like this
========================================================================================
Context ctx;
TuxedoConnectionFactory tcf;
TuxedoConnection myTux; // For now we get it via NEW until the Factory works
TypedString myData;
Reply myRtn;
int status;
System.out.println("getData called, converting " + toConvert);
try {
ctx = new InitialContext();
tcf =
(TuxedoConnectionFactory) ctx.lookup("TuxedoConnectionFactory");
} catch (NamingException ne) {
// Could not get the tuxedo object, throw TPENOENT
throw new TPException(TPException.TPENOENT,
"Could not get TuxedoConnectionFactory : " + ne);
myTux = tcf.getTuxedoConnection();
myData = new TypedString(toConvert);
System.out.println("About to call tpcall");
try {
myRtn = myTux.tpcall("TOUPPER", myData, 0);
} catch (TPReplyException tre) {
System.out.println("tpcall threw TPReplyExcption " + tre);
throw tre;
} catch (TPException te) {
System.out.println("tpcall threw TPException " + te);
throw te;
} catch (Exception ee) {
System.out.println("tpcall threw exception: " + ee);
throw new TPException(TPException.TPESYSTEM, "Exception: " + ee);
System.out.println("tpcall successfull!");
myData = (TypedString) myRtn.getReplyBuffer();
myTux.tpterm(); // Closing the association with Tuxedo
========================================================================================
I get following error when i call the above method from my client for EJB.
========================================================================================
TPENOENT(6):0:0:TPED_MINVAL(0):QMNONE(0):0:Could not get TuxedoConnectionFactory : javax.naming.NameNotFoundException: Unable to resolve 'TuxedoConnectionFactory'. Resolved ''; remaining name 'TuxedoConnectionFactory'
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
at sfsb3.ReplicableSFSB_6ri454_ReplicableSFSRemoteIntfImpl_1035_WLStub.getData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy0.getData(Unknown Source)
at test.TestDemoClient.main(TestDemoClient.java:37)
========================================================================================
I need to resolve this quickly please.
Thanks for any help
Regards,
AwaisI'm not very familiar with Tuxedo unfortunately.
I recommend that you post here:
Could not get TuxedoConnectionFactory, setting up AP's incorrectly?
You could also start with the code here:
Where to Download weblogic.wtc.jatmi Library/Package
And follow the instructions here:
http://download.oracle.com/docs/cd/E21764_01/web.1111/e13756.pdf -
FM GUI_UPLOAD gives PC036 "Error when opening the download file".
Dear all
I'm having a problem with a particular PC.
A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
The file we are trying to upload is a text file, with tab delimiter.
If the same user executes the same program from another PCs, it works fine.
If another user executes the program in the "problematic" PC, it gives the error.
So, the problem is PC-related.
I checked SAP GUI Codepage, and was the same as other PCs.
I cheched regional configuration, and was also the same as other PCs.
The operating system is Windows XP, and the SAP GUI version is 7.10, File version 7100.2.7.3077, Build 967944 , Patch level 7.
SAP version is ECC6.
I searched across forums, SAP note, and the web, but I couldn't find anything.
I would be grateful if someone could give me ideas.
Thanks in advance
JordiHello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.
-
Photoshop gives "Program Error" when I try to open files while VPN
I think this may be a new one. While VPN on my company network, Photoshop CS cannot open any files. Either drag and drop, double click or even file open command. You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though. Works fine if I'm not VPN but soon as I'm on it stops opening files or even creating a new blank canvas gives that error. I checked Adobe forum and nothing there to find about this one. Anyone else have this happen?
Hi, SSI.
1. What VPN client are you using?
As a guess, your VPN client may be blocking a port that PS CS may use for license verification over the Internet. The fact that it works AOK when not using the VPN would tend to support this hypothesis. As to what port it may be attempting to use, I can't say, but you may be able to find this out from Adobe and then work with your firm's networking staff to see if this port can be opened for use when the VPN is active.
2. You noted that you "checked Adobe forum and nothing there to find about this one." Did you post to the Adobe Photoshop forum? If not, I recommend doing so.
3. You wrote: "You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though."As FYI, in cases such as this, copying down the exact text of the message is helpful.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Maybe you are looking for
-
How to give raw footage shot in AVCHD to wedding clients?
I’ve been living in AVCHD **** for the past couple weeks. I just recently upgraded my old Sony PD-170s to new Panasonic AG-AC90s which record in AVCHD. I mostly shoot weddings and deliver the raw footage directly to my clients. When I was shooting
-
How to get the name of the ApplicationServer during runtime
Within a Servlet or JSP, I'm trying to programmatically get the name of the JVM (AppServer) where the code (war or ear) is deployed and running under. (This is like getting "server1" when using WSAD). I tried the System, Runtime and Thread approaches
-
I have Windows 7, with Office 10, Acrobat Adobe 9 Std. I used to be able to combine pdf files into one pdf until I converted to Office 10. Now when I combine 3 pdf files into one pdf, I am missing the middle pdf. Pages are there but the pages are bla
-
ITunes match won't go step one since I got Mountain loin
What should I do ?
-
Need more help, please.
OKay, here are my questions: Can you delete songs already loaded on iPod? If so, how? I am trying to purchase a song and the song is showing in the list and has been purchased, but it has an orange and white spinning arrow beside it that has been spi