Weblogic 4.5.1 and NSAPI wl-proxy

          Hi everyone. I have a question regarding the weblogic NSAPI proxy for
          Netscape web servers. We have a cluster of 8 WebLogic 4.5.1 servers
          running on two 5500 Sun servers (Solaris 2.6), each with 2GB of RAM.
          The weblogic clustering proxy runs on another machine what also acts as
          the document server. The web server on the proxy box is Netscape
          Enterprise Server v3.62.
          We are using in-memory replication on the weblogic servers. In this
          enviornment, is the weblogic NSAPI proxy/plugin our only bottleneck?
          Does anyone have any numbers on the time the wl-proxy takes up?? Is
          there a limit on the number of connections the wl-proxy can handle??
          Thanks
          --vinny

Generally speaking NSAPI is has performance impact since it is a legacy API
          added on top of the NS static serving engine. We have seen in high volume
          applications a better than 50% performance hit for requests handling by
          NSAPI code. Note that the internal NSAPI modules enjoy tighter integration
          with the server pump (i.e., undocumented internal API).
          I believe NES 4.0 goes to a new server arch. where the static serving engine
          is build on the same new servlet API (C++ and Java) that developers would
          use.
          -phil (plindsayebuilt.net)
          eBuilt, Inc.
          Vinny Carpenter <[email protected]> wrote in message
          news:[email protected]..
          >
          > Hi everyone. I have a question regarding the weblogic NSAPI proxy for
          > Netscape web servers. We have a cluster of 8 WebLogic 4.5.1 servers
          > running on two 5500 Sun servers (Solaris 2.6), each with 2GB of RAM.
          > The weblogic clustering proxy runs on another machine what also acts as
          > the document server. The web server on the proxy box is Netscape
          > Enterprise Server v3.62.
          >
          > We are using in-memory replication on the weblogic servers. In this
          > enviornment, is the weblogic NSAPI proxy/plugin our only bottleneck?
          > Does anyone have any numbers on the time the wl-proxy takes up?? Is
          > there a limit on the number of connections the wl-proxy can handle??
          >
          > Thanks
          >
          > --vinny
          >
          >

Similar Messages

Weblogic 5.1 and iPlanet as proxy server

Hello!
We are using Weblogic 5.1 and Netscape's iPlanet as a proxy server. Both
the machines are running of seperate NT boxes with static IP addresses.
All the changes which need to made on iPlanet side (i.e. copying
proxy36.dll, modificatiopn of mime types file, changes to the obj.conf
file etc.) have been made. Howver I am still not able to get the JSP
forwarded to Weblogic to get them serviced.
I had this evironment set up pretty quickly when using Weblogic 4.5.1.
Any ideas? Anything I might have overlooked. I have pretty much follwed
all the instructions specified by Weblogic to set up Netscape as a proxy
server.
ANy help in resolving this problem would be greatly appreciated.
Thanks.
Vijay R

I have the same setup but it's on one NT box and works OK. Make sure you have the proxy36.dll from Weblogic 5.1 Service Pack 6. Release notes say you MUST have SP6 proxy file to work with iPlanet 4.1
Sam Fowler
Vijay Raghavacharian <[email protected]> wrote:
Hello!
We are using Weblogic 5.1 and Netscape's iPlanet as a proxy server. Both
the machines are running of seperate NT boxes with static IP addresses.
All the changes which need to made on iPlanet side (i.e. copying
proxy36.dll, modificatiopn of mime types file, changes to the obj.conf
file etc.) have been made. Howver I am still not able to get the JSP
forwarded to Weblogic to get them serviced.
When I try to execute a JSP, I get the "Internal Server Error". On
analyzing the
error message sin the log files for iPlanet it reports that it is not
able to connect to
Weblogic.
In order to fix this porblem I just copies the proxy36.dll for Weblogic
version
4.5.1 and copied it in the required iPlanet directory. This seems to
have fixed
the problem of getting the JSP serviced by Weblogic, but I am wary about
the solution.
Am I doing something wrong or is there a new files availabel for
download. I checked
the website for BEA and did not find any answers.
I had this evironment set up pretty quickly when using Weblogic 4.5.1.
Any ideas? Anything I might have overlooked. I have pretty much follwed
all the instructions specified by Weblogic to set up Netscape as a proxy
server.
Any help in resolving this problem would be greatly appreciated.
Thanks.
Vijay R

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

I can no longer load website through firefox updated (tho, I can thru other search engines and browsers) fixing proxy settings didn't work. Other ideas?

I upgraded recently my firefox browser on my home computer which still runs Windows XP. I can no longer find websites thru firefox, tho, I can load websites through a google or yahoo search.
The firefox browser won't download secure or unsecure site. I type in the full name of the site, and it just hangs. I do not receive an error message.
Internet explorer continues to work fine on the computer.
I emptied my cookies and search history and updated the proxy setting to "no proxy". I still have the same problem.
I tried to uninstall and reinstall firefox with the hopes of changing the initial settings (to see if I should have disabled or abled more of the boxes). Unfortunately, the program didn't fully uninstall .. and the firefox reverts to where it was the last time I logged on.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites

Configuration problem in Weblogic 8.1.1 and 8.1.3

We have a problem when we hitting instrumented axis services in weblogic 8.1.1 and 8.1.3.
1.First we create a domain its use for only axis services.
2.We set the class path according to my project.
3.I start the server and deploy my axis services.its deploying nicely.
4.After that used my project and configure the services to getting log file purpose.
5.After instrument/configuration the service,I restart the server that time the service is redeploy and create the temporary file in .wlnotdelete directory our jar file put inside in this folder extract/myserver_calc1_calc1.This is my deploying service place.
6.But its not happening in this version of weblogic in that we redeploy the same services its works fine and getting log files.
7.when i redploy the same service that time only its working fine.
8.But i don't want to redploy the service. I want only restart time its happen that's only correct.
9.This problem is only happening in weblogic 8.1.1 and 8.1.3 its not happening in weblogic 7.5 and 8.1.4 is working fine and getting log files.
10.can any one give me a solution to rectify this problem in Weblogic 8.1.1 and 8.1.3.

I don't know about that, but I am using MyFaces and tomahawk with WLS8.1 sp5 jdk1.4.2_05 and it works fine.
I do remember getting such an error when I moved from Sun RI to MyFaces and all I can recall is that it was a commons library mismatch problem or some classpath problem...

Weblogic Integration Interview Questions and Answers

Can some one send me WebLogic Integration interview questions and answers to [email protected] and [email protected]
Thank you.

hi all,
can any one help us how to get or retrieve DataSource Names in weblogic using java code.
it is very urgent. please copy the java code here.
Somu :)

Can I supress BPM for Asyn outbound and syn inbound proxy interface

Hi all,
Is there any other alternate to remove the BPM at asyn outbound and syn inbound proxy interface. Reason because I can create another outbound proxy interface at the receiver. But at receiver side we already invested huge code to develop the sync server proxy. So the intension is, with out disturbing the code Can I make the message flow with out BPM?
Because the reason of removing BPM is for a simple interface like this I don't want to use BPM. souce is JDBC and receiver is ECC 6.0. I know with out BPM it can not be achieved but in PI 7.1 EHP 1 by any chance can we do?
I mean during response mapping from server proxy shall we use look up function to achieve?

This bean I have to use at sender channel right?
Yes
I mean is it is limited to JMS adapter?
No
You can find more information in the Wiki which deals with FILE to RFC synchronous...using the above Module

How to get weblogic logged in username and password in an MBEAN

Hi,
I have an MBEAN deployed under AdminServer. Want to establish a remote connection to credential Store MBean in base_domain using t3 protocol from this MBean, Which requires weblogic username password, port and host.
What is the best way to get username and password,in an MBEans deployed in AdminServer at runtime.
Thanks for your help in advance
-Matz

I don't think there is any way to get the password. What type of credential store is this and is it in the same domain?

Weblogic 10gR3 standard edition and enterprise edition

Difference between weblogic 10gR3 standard edition and enterprise edition ??

WebLogic Server software is the same in all of the various download distributions available that vary on platform and 32/64 bit architecture. However, which features are licensed for use vary by the edition customers license, which is covered here:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14860/products.htm#i1041725
That link is for WLS 11g, but it applies generally to WLS 10.3.0 as well.

Starting the WebLogic server, the NodeManager and the ManagedWebLogicServer (oam_server1)

DB Tier - 12.0.1 - Linux x86_64 SLES11-SP2
Application Tier - Linux x86_64 SLES11-SP2
Fusion MiddleWare - 11.1.2.2
I have installed all components for the OAM server and have gotten it up and running following docs located at
http://docs.oracle.com/cd/E40329_01/install.1112/e49521/install.htm#BABLBHBC
When starting the stack, I find that I have to open three separate xTerm windows for starting the WebLogic server, the NodeManager and the ManagedWebLogicServer (oam_server1). These windows have to be kept open until you decide to stop the servers.
Is there anyway to start the servers with 'nohup' so that they are running in the background? If someone inadvertently kills the VNC sessions, that will mean that the services that were started in that particular vnc session will also be killed.
There has to be another way around this.....and I'm looking to see if anyone on here can help with suggestions.
Thanks

DB Tier - 12.0.1 - Linux x86_64 SLES11-SP2
Application Tier - Linux x86_64 SLES11-SP2
Fusion MiddleWare - 11.1.2.2
I have installed all components for the OAM server and have gotten it up and running following docs located at
http://docs.oracle.com/cd/E40329_01/install.1112/e49521/install.htm#BABLBHBC
When starting the stack, I find that I have to open three separate xTerm windows for starting the WebLogic server, the NodeManager and the ManagedWebLogicServer (oam_server1). These windows have to be kept open until you decide to stop the servers.
Is there anyway to start the servers with 'nohup' so that they are running in the background? If someone inadvertently kills the VNC sessions, that will mean that the services that were started in that particular vnc session will also be killed.
There has to be another way around this.....and I'm looking to see if anyone on here can help with suggestions.
Thanks

Weblogic server 9.2 and SSL server certificate for the wrong site

I turned on SSL service for a weblogic 9.2 server and later on changed the hostname of the machine that weblogic was running on. So the hostname that my SSL server certificate was issued to has now became an invalid hostname. But my weblogic server continues to run SSL service without any exception. I can still access my web applications thru the SSL port (except of course I get a warning for the server certificate every time that it is for the "wrong site"). My question is this: should weblogic 9.2 verify the hostname in the server certificate and stop SSL service if the certificate is for the wrong site? Or is verifying the certificate strictly the job of the browser? Just want to make sure there is nothing wrong with my SSL configuration. Thanks.

So you are saying that something is wrong with my weblogic 9.2 ssl configuration? And that given a server certificate issued to a different hostname, my weblogic server should NOT be servicing ssl request and/or it should throw some sort of exception during startup? Thanks for clarifying.

Multiple timezones on weblogic 10.3.6 and forms 11.1.1.6

Hi
I have installed weblogic 10.3.6 and forms 11.1.1.6. I am trying to setup different forms environments with different time zones within the same installation of forms 11.1.1.6.
I have 2 environments testau and testnz.
testnz.env has a parameter name = time_zone and value = Pacific/Auckland.
testau.env is defaulted as the server timezone is set to Australian time.
The testnz and testau environments are all the same within the forms(Australian time), how can I set the testnz to New Zealand time?
Thanks

Hi
I have installed weblogic 10.3.6 and forms 11.1.1.6. I am trying to setup different forms environments with different time zones within the same installation of forms 11.1.1.6.
I have 2 environments testau and testnz.
testnz.env has a parameter name = time_zone and value = Pacific/Auckland.
testau.env is defaulted as the server timezone is set to Australian time.
The testnz and testau environments are all the same within the forms(Australian time), how can I set the testnz to New Zealand time?
Thanks

Weblogic portal external authentication and authorization

In our project we are using Weblogic portal 10.3 and Oracle 11g as back end. While creating the domain, I have specifed Oracle as back end. All the portal relevant schemas are created in Oracle database. For our application, We have created a specific schema. In a project specific schema, we have user table which containing fields like user name, password, email and other relevant fields. How to configure in weblogic to access this table for authentication instead of the user table in portal schema? As well as I need to know, in a admin console if a new user is created then the details will be stored in a portal schema table or in a project schema user table? Ultimately, I want to configure the project specific table to store the user details when the user created via admin console.
Need this urgently.

Hi Rajesh
Basically you need Custom Authenticator to store and authenticate all your users from your own specific DB Tables (that has user information). For this you need to develop Custom Authenticator. Please note that this has nothing to do with the Portal. This is core weblogic security stuff. I compiled some links for you. Incase if you have Oracle Support, open a ticket with them Oracle support do have a fully working sample custom RDBMS Authenticator that stores and authenticates Users from specific set of custom Tables. They will send you right away. I hope someone in these forums may have this sample also in their personal blogs/forums.
And, Yes, you can force your Custom Authenticator to be the default one and to store the users when you create the users in Admin Console. Basically when you create the users you should see the option like to create the users in which Authentication Provider like that.
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/dvspisec/atn.html (Authentication Providers)
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/dvspisec/atn.html#wp1145342 (Do You Need to Develop a Custom Authentication Provider?)
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/dvspisec/atn.html#wp1089150 (How to Develop a Custom Authentication Provider)
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/secmanage/atn.html#wp1204261 (Changing the Order of Authentication Providers)
Thanks
Ravi Jegga

Re: WebLogic server 5.1 and SP3

I am trying to install Cocoon with WebLogic server 5.1 and wondering if I
need to install the SP3 to get this working.
Any suggestions are welcome.
SK

I know of no reason that SP3 should be required with Cocoon. In general
regardless of the SP you may need to have Cocoon classes first as you may
bet XML parser conflicts.
cheers
mbg
In article <395cc7ec$[email protected]>, [email protected] says...
I am trying to install Cocoon with WebLogic server 5.1 and wondering if I
need to install the SP3 to get this working.
Any suggestions are welcome.
SK
==================================================
NewsGroup Rant
==================================================
Rant 1.
The less info you provide about your problem means
the less we can help you. Try to look at the
problem from an external perspective and provide
all the data necessary to put your problem in
perspective.

Regarding Weblogic Server 5.1 and Jview.

I have an applikation running on a Weblogic server 5.1 and have to access COM Components -
I used MS J++ to wrap the COM components and started the server with jview. That work just fine
as long as I dont include the rt.jar from the jdk1.3 library in the classpath. Why is that? I know
Weblogic Server is not sertified for using jdk1.3 on windows 2000, but is that the reason?
The error according according to Microsoft documentation is that there are dll's missing in the
system path,but it works just fine without rt.jar ...
If someone has encountered the same problem please respond ...
The error I get is :
The WebLogic Server did not start up properly.
Exception raised: java.lang.UnsatisfiedLinkError: java/security/AccessController
.doPrivileged Possible causes: If you are trying to use J/Direct (@dll.import),
check your compiler version (for JVC, requires 4336 or greater.) If you are try
ing to use RNI, there are new requirements: see documentation.
java.lang.UnsatisfiedLinkError: java/security/AccessController.doPrivileged Pos
sible causes: If you are trying to use J/Direct (@dll.import), check your compil
er version (for JVC, requires 4336 or greater.) If you are trying to use RNI, th
ere are new requirements: see documentation.
Sjur Wergeland
[email protected]
[att1.html]

I think my Q is not clear. I shall explain how the application works. I am having application based on Swings and that is a website building program. User has options like ading an image into their site with an element called 'Image' available as part of the system. Then user can either select an image from the picture gallery provided or can upload his own image.
Now, if the user is uploading a picture that has space in name ( we use a servlet program to upload the image into user directory), it will get uploaded. But when the swing program tries to paint the image in the Image element ( It is essentially a JLabel ), the program is sending a request to the WL server. Since the URL contains space in name, server returns error. Even if do URL Encoding, it will add %20 in the URL and still WL will report error saying that file not found. It seems that WL is unable to process requests that has space in the URL.
If any one has any solution to this, please help..
Liju

Weblogic 4.5.1 and NSAPI wl-proxy

Similar Messages

Maybe you are looking for