Weblogic Apache Plugins -Put/Delete Method
Hi ,
I need to find out if the weblogic plugin Apache supports the use of http PUT and DELETE operations (instead of GET and POST) and if so I need an example plugin configuration where the clients are using the "PUT" and "DELETE" operations. And, again assuming the plugin supports PUT and DELETE, are there any known issues with there use in conjunction with the plugin.
Hi ,
Here is the details about the HTTP Put/Delete Protocol :-
Supported :-
HTTP Put and Delete Protocol is supported in Weblogic and Weblogic Apache Plugin .
In Apache also these protocols are supported .
Configuration :-
If you want to configure it older version of Apache we have to use the (WebDav) of the apache .But you don't have do anything for newer version
as this module should be there and we have to do only configuration for Apache for this module .
Configuration of WebDab is here in newer version of Apache:-
http://www.serverwatch.com/tutorials/article.php/2176771/Enabling-WebDAV-on-Apache.htm
We don't have to do anything on Weblogic and Apache Weblogic Plugin side .As by default they support these protocols.
Usage :-
I tested this in my environment by sending a Put request to Weblogic Plugin using the Tool called "Fiddler".
I sent a request to Weblogic Plugin using this tool and it works . Even i checked on the Apache plugin log files also that it works.
There is good note from apache how to use the Put/Delete function in Apache .
Please follow this link for usage for Put/Delete for Apache for uploading files to server . How this make life easy .
http://www.apacheweek.com/features/put
http://stackoverflow.com/questions/1051004/how-to-send-put-delete-http-request-in-httpurlconnection
Security Risk :-
Please keep in mind that there is security risk when we use this protocol which is clearly explain in the note when we use this in the example above.
Here is a nice article also which explains the security concerns of Put :-
https://www.golemtechnologies.com/articles/http-put-security
Tested hitting localhost/console
Edited the request header GET /console/login/LoginForm.jsp HTTP/1.1 to PUT /console/login/LoginForm.jsp HTTP/1.1
Got the following in the apache log file
================New Request: [PUT /console/ HTTP/1.1] =================
Wed May 29 19:24:35 2013 <608013698698758> INFO: SSL is not configured
Wed May 29 19:24:35 2013 <608013698698758> Using Uri /console/
Wed May 29 19:24:35 2013 <608013698698758> After trimming path: '/console/'
Wed May 29 19:24:35 2013 <608013698698758> The final request string is '/console/'
Wed May 29 19:24:35 2013 <608013698698758> SEARCHING id=[10.157.153.243:7001] from current ID=[10.157.153.243:7001]
Wed May 29 19:24:35 2013 <608013698698758> The two ids matched
Wed May 29 19:24:35 2013 <608013698698758> @@@FOUND...id=[10.157.153.243:7001], server_name=[localhost], server_port=[80]
Wed May 29 19:24:35 2013 <608013698698758> attempt #0 out of a max of 5
Wed May 29 19:24:35 2013 <608013698698758> Trying a pooled connection for '10.157.153.243/7001/7001'
Wed May 29 19:24:35 2013 <608013698698758> getPooledConn: No more connections in the pool for Host[10.157.153.243] Port[7001] SecurePort[7001]
Wed May 29 19:24:35 2013 <608013698698758> general list: trying connect to '10.157.153.243'/7001/7001 at line 2716 for '/console/'
Wed May 29 19:24:35 2013 <608013698698758> INFO: New NON-SSL URL
Wed May 29 19:24:35 2013 <608013698698758> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Wed May 29 19:24:35 2013 <608013698698758> EINPROGRESS in connect() - selecting
Wed May 29 19:24:35 2013 <608013698698758> Local Port of the socket is 3175
Wed May 29 19:24:35 2013 <608013698698758> Remote Host 10.157.153.243 Remote Port 7001
Wed May 29 19:24:35 2013 <608013698698758> general list: created a new connection to '10.157.153.243'/7001 for '/console/', Local port:3175
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Host]=[localhost]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Connection]=[keep-alive]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.94 Safari/537.36]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate,sdch]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept-Language]=[en-US,en;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Cookie]=[ADMINCONSOLESESSION=yQ7GRmLfKBhHdJrQ55t4X2v9y0v1NZCGj5qtfQdshz6w87nPc4nW!419247034]
Wed May 29 19:24:35 2013 <608013698698758> URL::sendHeaders(): meth='PUT' file='/console/' protocol='HTTP/1.1'
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Host]=[localhost]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.94 Safari/537.36]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept-Encoding]=[gzip,deflate,sdch]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept-Language]=[en-US,en;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Cookie]=[ADMINCONSOLESESSION=yQ7GRmLfKBhHdJrQ55t4X2v9y0v1NZCGj5qtfQdshz6w87nPc4nW!419247034]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Connection]=[Keep-Alive]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[WL-Proxy-Client-IP]=[127.0.0.1]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Proxy-Client-IP]=[127.0.0.1]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-Forwarded-For]=[127.0.0.1]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[419247034]
Wed May 29 19:24:35 2013 <608013698698758> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Wed May 29 19:24:35 2013 <608013698698758> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Connection]=[close]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Date]=[Wed, 29 May 2013 23:24:35 GMT]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Location]=[http://localhost/console/console.portal?_nfpb=true]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Content-Type]=[text/html; charset=UTF-8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[X-WebLogic-JVMID]=[419247034]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Wed May 29 19:24:35 2013 <608013698698758> parsed all headers OK
Wed May 29 19:24:35 2013 <608013698698758> sendResponse() : r->status = '302'
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[Date]=[Wed, 29 May 2013 23:24:35 GMT]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[Location]=[http://localhost/console/console.portal?_nfpb=true]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Wed May 29 19:24:35 2013 <608013698698758> canRecycle: conn=1 status=302 isKA=0 clen=-1 isCTE=1
Wed May 29 19:24:35 2013 <608013698698758> closeConn: URL.canRecycle() returns false, deleting URL '10.157.153.243/7001'
Wed May 29 19:24:35 2013 <608013698698758> request [console/] processed successfully..................
Regards
Sahil Soni
------------------------------------------------------------------------------------------------------------------------------
Similar Messages
-
How to disable PUT/DELETE method in SMC tomcat
Hi,
SMC provides tomcat as the web server to allow logon the SMC console through IE.
For security consideration, we have to disable the http "PUT" and "DELETE" method of tomcat. Its config file seems to be /opt/SUNWsymon/web/conf/catalina.policy, but I have no knowledge of this file.
Do anyone know how to disable PUT/DELETE method in tomcat? Or provide me a reference book for this issue?
Thanks a lot.For security consideration, we have to disable the
http "PUT" and "DELETE" method of tomcat. Its config
file seems to be
/opt/SUNWsymon/web/conf/catalina.policy, but I have
no knowledge of this file.I'm not sure how to disable that feature, but be aware if you disable the ability for Agents to send files to the SunMC web server you may break all Configuration Tasks. Agent config files are sent to the Server by HTTP to allow them to be stored as templates/snapshots.
I don't remember seeing instructions on how to make the changes you want: the quickest way to find out is probably to call SunMC support.
Regards,
[email protected] -
About Weblogic-Apache plugin for windows NT
Is there windows NT version of WEBLOGIC-APACHE Plugin? If so where can we get the details about the product?
Last time I checked, the NT version of Apache was still an alpha (or
beta???) release. I believe that we have plans to support this once the NT
version is no longer in alpha/beta status...
Mike Reiche wrote:
I am 93% sure there is no such plug-in available.
Mike
Sairam Krishnaswamy <[email protected]> wrote:
Is there windows NT version of WEBLOGIC-APACHE Plugin? If so where can
we get the details about the product? -
How to send message using Head,PUT,DELETE method
we can use Get,Post method in a form, but how to use Head,Put,DELETE method to submit. I try to use "method=head" in form tag, and write some code in doHead() method in servlet, but after I submit the form, the doHead() is not called by the servlet.
In HTML there is no Tag that support HEAD or PUT. You might create your own HTTP Client and implement HEAD and PUT Requests. Have a look at the HTTP Protocol to learn what they are used for and how they are to be implemented.
-
Weblogic Apache Plugin - Load Balancing
Hi,
I have two Apache servers each with the WLS Apache Plugin installed. These sit in front of two WL servers each having two managed servers.
Each plugin is setup with the list of servers as follows:
<IfModule mod_weblogic.c>
WebLogicCluster Server_1:7030,Server_1:7040,Server_2:7010Server_2:7020
Debug OFF
WLLogFile logs/cws_proxy.log
WLTempDir "logs"
DebugConfigInfo OFF
WLProxySSL On
KeepAliveEnabled ON
KeepAliveSecs 15
MatchExpression *.xhtml
MatchExpression *.jsp
</IfModule>
Look OK so far?
Anyway, looking at the WL access.log I can see that server 1 is only receiving requests from one Apache, and the same goes for the other access.log. So... it's not really load balancing is it?
Can anyone offer any advice or comments on my plugin configuration or why it is not load balancing properly?
Much Appreciated,I came across this link which says ‘WebLogic Server does not always load balance an object’s method calls.” And has few more details about the load balancing strategy of weblogic.
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html#wp1026599
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html
This might help. -
Load Factor for Weblogic Apache plugin
Hi All,
I have a performance testing environment and I am looking to distribute the traffic from the Apache server that we use for caching static content to three Weblogic servers. I haven't been able to find any options for configuring the distribution of requests across the three servers. Apache mod_proxy has a "loadfactor" configuration to weight the traffic toward a particular node. It seems that the plugin only operates using only a simple round-robin algorithm for load balancing.
I have found the Apache plugin configuration documentation and it doesn't look like there is such an option but I am wondering if I am missing something and it is supposed to be configured somewhere else.
Any information regarding this is appreciated.
Thanks,
KevinI came across this link which says ‘WebLogic Server does not always load balance an object’s method calls.” And has few more details about the load balancing strategy of weblogic.
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html#wp1026599
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html
This might help. -
WebLogic Apache plugin giving 404 for 50% of requests
I have the following configuration on my httpd.conf
<IfModule mod_weblogic.c>
RequireSSLHostMatch false
Debug ON
EnforceBasicConstraints OFF
HungServerRecoverSecs 5
ConnectRetrySecs 0
KeepAliveEnabled ON
KeepAliveSecs 15
IdemPotent ON
WLLogFile /var/log/httpd/wlproxy_global.log
DebugConfigInfo On
</IfModule>
And this Location configured:
<Location /FaleConosco>
SetHandler weblogic-handler
WebLogicCluster 10.8.90.147:7006
Debug ON
WLLogFile "/var/log/httpd/wlproxy-faleconosco.log"
</Location>
And this is what's happening:
1 - Half of requests through Apache, get a 404
2 - All requests that go directly to WebLogic, get a 200
Any idea?
Edited by: 938972 on Jun 6, 2012 7:48 AMIt seems that the WebLogic plugin for Apache has a bug (where do I submit bugs?)
If WebLogicCluster is used with only one server, there might be problems with requests being missed.
I changed the above configuration to use the WebLogicHost / WebLogicPort, and now I get 100% of HTTP/1.1 200
<Location /FaleConosco>
SetHandler weblogic-handler
# WebLogicCluster 10.8.90.147:7006
WebLogicHost 10.8.90.147
WebLogicPort 7006
Debug OFF
WLLogFile "/var/log/httpd/wlproxy-faleconosco.log"
</Location>
Hope this thread will help others -
Weblogic apache plugin and webservices
Can I use the weblogic plugin on a DMZ based Apache server and use a 3 tier architecture
to implement webservices.
Using this model can a external application contact my webservices running in
my internal network and can my weblogic/webservices server contact an external
application/webservices using the same route i.e through the apache webserver
and weblogic plugin.
Any documentation regarding the architecture?Hi Anil,
Not sure this is possible, unless you are using it as a proxy and setup
the proper host/port mappings, see:
http://edocs.bea.com/wls/docs81/webserv/client.html#1072224
We have a very responsive security newsgroup, you might ask your
configuration question there:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.security&utag=
Sorry, not much help (SNMH)
Bruce
Anil Jacob wrote:
>
Can I use the weblogic plugin on a DMZ based Apache server and use a 3 tier architecture
to implement webservices.
Using this model can a external application contact my webservices running in
my internal network and can my weblogic/webservices server contact an external
application/webservices using the same route i.e through the apache webserver
and weblogic plugin.
Any documentation regarding the architecture? -
Hello,
I am running Apache 2.2 and WebLogic 10.3 and I am trying to get Apache to listen for server.domain.com on port 80 and load the redirect.html file that will redirect the user to httpS://server.domain.com. But it is trying to proxy the port 80 request to weblogic. Any ideas?
I have setup virtual host in apache as follows:
<VirtualHost x.x.x.x:80>
ServerName server.domain.com
DocumentRoot /usr/local/apache2/htdocs/redirect
DirectoryIndex redirect.html
</VirtualHost>
<VirtualHost x.x.x.x:443>
ServerName server.domain.com
<IfModule mod_weblogic.c>
SetHandler weblogic-handler
WebLogicHost wbapp04.ipaper.com
WebLogicPort 8001
MatchExpression *.jsp
DebugConfigInfo ON
DynamicServerList OFF
HungServerRecoverSecs 900
</IfModule>
SSLEngine On
SSLCertificateFile conf/certs/wbdev.ipaper.com.crt
SSLCertificateKeyFile conf/certs/workbrain.key
DocumentRoot /usr/local/apache2/htdocs/
</VirtualHost>
Thanks,
KeithHi,
Weblogic plugin has a log as well and you can try to enable it to see if the connection is working fine from 443 virtual host to weblogic.
To enable it: http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/plugin_params.html#wp1143055
Parameter: Debug
Thanks. -
Folks,
I read in the instructions for installing the weblogic-apache plugin
where you can use the plug-in so apache can serve the static pages and
the servlets and ejbs are routed to the weblogic server. Can we use a
configuration where just the ejb's are mapped to the weblogic server and
the html, jsp's and servlets are served by the apache server? It seems
logical that the ejb's could be located by finding the JNDI compliant
server, and the rest served by apache. Are there any folks out there
using an architecture where weblogic is used only for ejbs and the rest
is served by apache? Or are there specific restrictions on what gets
served where using apache and weblogic? Thanks for listening,
Dan McGowan
Millennia Vision Corporation
[email protected]
509.585.1379
pager: 877.460.9073
cell: 509.544.8184
[dmcgowan.vcf]The problem in using the JSPs and servlets on the servlet engine
of the web server is, they can not use clustering/faliover facilities
that come with WebLogic server.
-Selvan Rajan
Michael Girdley wrote:
Yes, a minority of customers use another servlet engine/JSP engine in front
of Weblogic. Then, they rely upon EJB's that reside in WLS possibly on
another machine.
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Dan McGowan" <[email protected]> wrote in message
news:[email protected]..
Folks,
I read in the instructions for installing the weblogic-apache plugin
where you can use the plug-in so apache can serve the static pages and
the servlets and ejbs are routed to the weblogic server. Can we use a
configuration where just the ejb's are mapped to the weblogic server and
the html, jsp's and servlets are served by the apache server? It seems
logical that the ejb's could be located by finding the JNDI compliant
server, and the rest served by apache. Are there any folks out there
using an architecture where weblogic is used only for ejbs and the rest
is served by apache? Or are there specific restrictions on what gets
served where using apache and weblogic? Thanks for listening,
Dan McGowan
Millennia Vision Corporation
[email protected]
509.585.1379
pager: 877.460.9073
cell: 509.544.8184 -
Setup issues: Apache plugin for Weblogic
Hi,
I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
I'm using Weblogic 8.1 SP2, single server.
Please find below the messages appear in browser, plugin logs, and apache version.
Thanks in advance for your help.
======================Browser Error Message================
JSP Processing Error
HTTP Error Code: 404
Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
======================Browser Error Message End================
==========Apache version============
Please find apache version and plugin logs below:
# ./apachectl -v
Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
Server built: Nov 4 2004 09:58:18
==========Apache version End============
=================Plugin Logs================
================New Request: [GET /AppConsole/ HTTP/1.1] =================
Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 12 08:20:14 2006 INFO: sysSend 639
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 12 08:20:14 2006 parsed all headers OK
Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
=================Plugin Logs End================Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
I see 500 error in the apache access log file.
I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
Please find below httpd.conf file content.
==============httpd.conf===============
ServerName eus0000168.eu.verio.net
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
# server as "/opt/IBMIHS/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/opt/IBMIHS"
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#LockFile logs/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 10
## Server-Pool Size Regulation (MPM specific)
# worker MPM
# ThreadLimit: maximum setting of ThreadsPerChild
# ServerLimit: maximum setting of StartServers
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
#StartServers 5
StartServers 1
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 1000
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
# Change this to "Listen 0.0.0.0:port" to restrict the server to
# IPv4.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule mime_module modules/mod_mime.so
#LoadModule dav_module modules/mod_dav.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule deflate_module modules/mod_deflate.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#LoadModule status_module modules/mod_status.so
<IfModule mod_status.c>
ExtendedStatus On
</IfModule>
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#ServerName new.host.name:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot "/opt/IBMIHS/htdocs/en_US"
#DocumentRoot "/www/a"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/opt/IBMIHS/htdocs/en_US">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit Indexes
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
# EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel debug
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature Off
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/opt/IBMIHS/icons/"
<Directory "/opt/IBMIHS/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
<IfModule mod_cgid.c>
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#Scriptsock logs/cgisock
</IfModule>
# "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/opt/IBMIHS/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
AddType application/x-tar .tgz
AddType image/x-icon .ico
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/opt/IBMIHS/error/"
# <Directory "/opt/IBMIHS/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en de es fr it nl sv
# ForceLanguagePriority Prefer Fallback
# </Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
#Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
#all you require is reverse proxy.
#ProxyRequests On
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#ProxyVia On
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
NameVirtualHost 83.231.147.65:80
<VirtualHost 83.231.147.65:80>
ServerName eus0000168
DocumentRoot "/www/a/global/nissan-europe"
RewriteEngine on
RewriteLogLevel 0
RewriteOptions inherit
#--RAM----
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo On
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
#WebLogicHost eus0000160
#WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
WebLogicPort 27110
</IfModule>
DynamicServerList OFF
<Location /AppConsole>
SetHandler weblogic-handler
</Location>
<Location /console>
SetHandler weblogic-handler
</Location>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
<Location /iiop>
SetHandler weblogic-handler
</Location>
#------RAM------
Alias /data "/www/a/data"
Alias /at "/www/a/at"
Alias /ch "/www/a/ch"
Alias /ch_fr "/www/a/ch/ch_FR"
Alias /ch_de "/www/a/ch/ch_DE"
Alias /de "/www/a/de"
Alias /es "/www/a/es"
Alias /fr "/www/a/fr"
Alias /it "/www/a/it"
Alias /nl "/www/a/nl"
Alias /se "/www/a/se"
Alias /tr "/www/a/tr"
Alias /uk "/www/a/uk"
Alias /cz "/www/a/cz"
Alias /hu "/www/a/hu"
Alias /sk "/www/a/sk"
Alias /global "/www/a/global"
Alias /dk "/www/a/dk"
Alias /fi "/www/a/fi"
Alias /no "/www/a/no"
Alias /pl "/www/a/pl"
Alias /pt "/www/a/pt"
ErrorDocument 404 /error404.html
ErrorDocument 500 /error.html
</VirtualHost>
Include conf/virtual-hosts/
CoreDumpDirectory /logs/apache2
LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo ON
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
WebLogicPort 27110
</IfModule>
CoreDumpDirectory /logs/apache2
D -
Weblogic Http Apache Plugin not working
Hi,
I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
http://e-docs.bea.com/wls/docs103/plugins/apache.html
but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
http://localhost:80/weblogic/
Here is my httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7001
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
ProxyRequests On
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
images shows. Any help is appreciated.
ThanksHi,
There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
Regards,
Dinesh -
Configuring Apache HTTP Server with Oracle Weblogic Server plugin
Hello friends,
I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
*************************************************log****************************************************
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431>
================New Request: [GET /images/cab.gif HTTP/1.1] =================
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
secondaryJVMID: [NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Thanks"One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
with server 3 going down it does 1-2-1-2-1...
An example configuration (with SSL off) looks as follows:
LoadModule weblogic_module "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
<IfModule weblogic_module>
ConnectTimeoutSecs 10
ConnectRetrySecs 2
DebugConfigInfo ON
WLSocketTimeoutSecs 2
WLIOTimeoutSecs 300
Idempotent ON
FileCaching ON
KeepAliveSecs 20
KeepAliveEnabled ON
DynamicServerList ON
WLProxySSL OFF
</IfModule>
<Location /LoadTest6>
SetHandler weblogic-handler
WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
</Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
"the plugin sometimes redirects to the other active node"
This is somewhat strange, do you have session binding turned off?
"and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html -
JMX with apache plugin and weblogic
Hy every body
I use weblogic 9.1, throw apache plugin
I try to get mbean with JMX,
i have this error on the log of the server when I try to acces to a server by passing apache url into jmxConnector:
java.lang.AssertionError: Assertion violated
at weblogic.utils.Debug.assertion(Debug.java:57)
at weblogic.iiop.MuxableSocketIIOP.getMessageLength(MuxableSocketIIOP.java:315)
at weblogic.socket.AbstractMuxableSocket.isMessageComplete(AbstractMuxableSocket.java:336)
at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:166)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
the log:
================New Request: [GIOP] =================
Tue May 31 14:25:36 2011 <35921306844736112> INFO: SSL is not configured
Tue May 31 14:25:36 2011 <35921306844736112> Using Uri /
Tue May 31 14:25:36 2011 <35921306844736112> After trimming path: '/'
Tue May 31 14:25:36 2011 <35921306844736112> The final request string is '/'
Tue May 31 14:25:36 2011 <35921306844736112> SEARCHING id=[192.168.2.83:7001] from current ID=[192.168.2.83:7001]
Tue May 31 14:25:36 2011 <35921306844736112> The two ids matched
Tue May 31 14:25:36 2011 <35921306844736112> @@@FOUND...id=[192.168.2.83:7001], server_name=[AdminServer], server_port=[80]
Tue May 31 14:25:36 2011 <35921306844736112> attempt #0 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> Trying a pooled connection for '192.168.2.83/7001/7001'
Tue May 31 14:25:36 2011 <35921306844736112> getPooledConn: No more connections in the pool for Host[192.168.2.83] Port[7001] SecurePort[7001]
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2039
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2039
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2039, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #1 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2040
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2040
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2040, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #2 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2041
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2041
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2041, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #3 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2042
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2042
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2042, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #4 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2043
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2043
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2043, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #5 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2044
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2044
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2044, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> request [] did NOT process successfully..................
the httpd.conf:
<IfModule mod_weblogic.c>
WebLogicHost 192.168.2.83
WebLogicPort 7001
#WebLogicCluster t3://192.168.2.83:7003, t3://192.168.2.83: 7005, t3://192.168.2.83:7013
Idempotent on
Debug HFC,HTW,HFW
WLLogFile c:/wlproxy.log
WLTempDir c:/TEMP
DebugConfigInfo On
KeepAliveEnabled ON
KeepAliveSecs 14
MatchExpression *
</IfModule>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
I don't use ssl.
I can access to the jsp of the server with the url of apach , but i cannot use jmx throught apache. I can use jmx with the server if I don't use apache, but i need apache for the next step of the project.
please, help me !I think the plug-in is intended for serves static pages, and another part of the document like MIME types.
I assume you are using the http protocol in your client to establish a jmx connection. Try enabling HTTP tunneling in weblogic server.
Can you post the code used to establish connetion? -
URL for apache plugin for linux with weblogic 6.1
Hi,
can anyone tell me, where i can find the apache plugin for linux weblogic 6.1
thanks in advance,
cheers chrisCould you give some detail for this issue? I have tried the plugin with IIS6 and it does works.
Maybe you are looking for
-
Multiple devices showing in text message forwarding
Is anybody seeing multiple devices when turning on "Text Message Forwarding" (Continuity for SMS) in iOS 8.1?
-
Rich black needs to be designed?
In ID (CS5) preferences, it offers an option of "Accurate blacks" or "Rich blacks". As discussed before, "Accurate blacks" are 100%K and "Rich blacks" are a combination of CMYK. Am I assuming correctly that if you have designed a black box in InDes
-
I am unable to open my i pad. prompted to enter password keyboard opens but doesn't transcribe.
I am unable to open my i pad. When prompted to enter password, keyboard opens, but #s and letters selected do not enter! Help!
-
Hi, I have a JMenuBar in My application which consists of 16 JMenus. I need to get the 10 Menus in the first Line and remaining Menus at next Line As I need to pass My single Jmenubar Object to some othermethod. kindly suggest Regarding this.. Regard
-
Most of the sample applications use a tab bar at the bottom to switch between features. This tab bar usually has a little blue button to hide and show the tab bar. Examples are the DeviceDemo and DvtGalery. For me, this feel not very iOS like and I d