Weblogic installation with IBM JDK

Hi,
We are planning to install Oracle Fusion Middleware components 11gR1 (11.1.1.6+) on IBM AIX Power 64 Bit servers. When i checked the certification matrix IBM JDK 7 SR3+ IV33133 is the certified version of JDK for weblogic installation.
Please help me on how to exactly get/download the IBM JDK 7 SR3+ IV33133? I have checked the IBM JDK downloads page and not exactly getting how can we get SR3+ IV33133?
Best Regards,
Kartheek

Hi Prakash,
I guess the '+' sign in the IBM JDK 7 SR3 + IV33133 is bit tricky. I doubt whether it is IBM JDK 7 SR3 added with IV33133.
I have spent quite some time on this JDK installation and got to know that the 3rd party products that are certified to run only on specific versions of IBM's Java for AIX can be downloaded from IBM Java for ISVs download page.
Here are steps that i have followed to download the IBM JDK 7 SR3+ IV33133
1.Go to the IBM Java for ISVs download site at the following URL:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?lang=en_US&source=swg-ibmjavaisv
2.Log in using your IBM ID and password.
3.Enter the associated Access Key MJ3D7TQGMK in the IBM Java for ISVs page
4.Click on submit
5.On the IBM SDK Interim Fixes (iFix) for Oracle page you will see the below JDK versions that are exactly matching the one provided in the certification matrix.
pap6470sr3ifx-20121213_01 (SR3+IV33133)
Java7_64.0.0.61.tar.gz  (115 MB)
pap6470sr3ifx-20121213_01 (SR3+IV33133)
pap6470sr3ifx-20121213_01-sdk.tar.Z  (184 MB)
6.installed the JDK
Please can you confirm that this procedure is correct?
Best Regards,
Kartheek

Similar Messages

  • WebLogic 5.1 & IBM JDK 1.1.8 on RedHat Linux 6.2

    Hello
    I am trying to get WebLogic 5.1 to run with IBM JDK 1.1.8 on a RedHat 6.2 machine. When I start the sample server, it always SIGEV in the native thread (something like that).
    I do not have any problems with the Blackdown 1.2.X JDK. I would like to evaluate the IBM JDK as that is the preferred solution in my group.
    Please reply
    Thanks you
    Narayanan Iyer
    [email protected]

    Hi Michael
    It appears to be a bug in the IBM JDK 1.1.8 release version built on May ??
    ,2000. I downloaded the newer version IBM JDK 1.1.8 built on July 13,2000
    and it appears to be fine with SP4.
    I am curious as to the status of IBM JDK1.3 on RedHat 6.2 and well as the
    SUN JDK1.3. Both appear to crash. I would really like to take advantage of
    the performance features offered.
    Thanks
    "Michael Girdley" <[email protected]> wrote in message
    news:[email protected]..
    >
    >
    Could you please post the error?
    You should also make sure that you are using a certified JVM. Theplatform
    support page for WebLogic Server is located at:
    http://www.weblogic.com/platforms/index.html
    This page has the latest and greatest information on the platforms that
    WebLogic is certified and supported on.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    "Narayanan Iyer" <[email protected]> wrote in message
    news:[email protected]..
    Hello
    I am trying to get WebLogic 5.1 to run with IBM JDK 1.1.8 on a RedHat
    6.2
    machine. When I start the sample server, it always SIGEV in the native
    thread (something like that).
    I do not have any problems with the Blackdown 1.2.X JDK. I would like toevaluate the IBM JDK as that is the preferred solution in my group.
    Please reply
    Thanks you
    Narayanan Iyer
    [email protected]

  • JSPM startup fails with IBM JDK 1.4.2 SR13

    Hi experts,
    I´m upgrading my Portal to EHP1 SP06. After the upgrade I checked SDM and JSPM, SDM is working fine but the JSPM don´t start any more.
    I just getting the information after starting the script 'go' under AIX:
    'Waiting for SDTServer to connect ...'
    Nothing happened after 10min...
    Just want to let you that this issue is caused by a buggy version of the AIX JDK.
    There is a new sapnote 1422869 for this issue, please have a look.
    Solution
    Use the actual recommended "IBM JDK 1.4.2 SR13 FP4 ifix" or SR13 without any FP.
    The problem was introduced with SR13 FP2 and is in FP3 and FP4 too.
    Install the recommended "IBM JDK 1.4.2 SR13 FP4 ifix" to solve the problem (see SAP note 1008311 or 1024539). As a workaround you can use the remote GUI from another system using a not affected JDK.
    I installed IBM JDK 1.4.2 SR13 without any FP and the JSPM is working again
    You can get the new Java versions directly from IBM, click here to download it.
    Regards,
    Jens

    Hi,
    While installing solution manager 4 (SLES x86_64) I also run into the problem "ibjvm.so preloadLibrary: /opt/IBMJava2-amd64-142/jre/bin/j9vm/libj9vm22.so: cannot open shared object file: No such file or directory" during the phase "Create Java users"
    I've taken your advice (Chris B) and the installation carries on with out a problem. (and the java instance has started)
    When I stop and start sap, I then cannot get the Java instance to start again!
    The error in the "std_bootstrap.out" has the message; "libjvm.so preloadLibrary: /opt/IBMJava2-amd64-142/jre/libj9vm22.so: cannot open shared object file: No such file or directory
    libjvm.so failed to load: j9vm22"
    I have set all the environmental variables including the LD_LIBRARY_PATH and JAVA_HOME
    I was wondering if you had the same problem, else if anyone else could please please help.
    Thanks,
    Chris G
    Message was edited by: Chris Geladaris

  • SAP EHP5 MSCS installation with IBM DB2 9.7 on windows 2008 R2

    Dear Sir
    i am installing SAP EHP5 high availability with IBM DB2 9.7 on windows 2008 R2
    first cluster node installation is completed,
    now i am going to install database instance, before that i am configuring the database for MSCS as per installation guide,
    but the database group is note creating in Failover cluster manager.
    if you have any solution please reply
    regards
    gourishankar baikerikar

    HI,
    Thats a printing mistake in installation guide..
    copy db2mscs.ese file to db2mscs.cfg ...
    Remove all the unwanted stuff like explination of parameter paragraphs
    Confgure required parameters like  below and make sure there are no unwanted spaces in the txt file.
    #Global section
    DB2_INSTANCE = DB2SID
    DB2_LOGON_USERNAME = XXXXXX\db2sid
    DB2_LOGON_PASSWORD = password
    CLUSTER_NAME = GXXXXX
    MSCS Group for Node 0
    GROUP_NAME = DB2 SID Group
    DB2_NODE = 0
    #IP_NAME = DB2 IP SID
    #IP_ADDRESS=192.168.0.xx
    #IP_SUBNET=255.255.255.0
    #IP_NETWORK=Ethernet(3)
    NETNAME_NAME =  DB2 NetName SID
    NETNAME_VALUE = DB2SID
    #NETNAME_DEPENDENCY = DB2 IP SID
    Open you cluster console and select NODE A there you should be able to identify the disks for DB clustering,
    Copy that name and paste it here for  DISK_NAME
    DISK_NAME = DATABASE_CD2                  
    DISK_NAME = DBLOGS_CD4
    #INSTPROF_DISK = Disk M:
    #TARGET_DRVMAP_DISK = Disk M:
    With the above process you should be able to cluster your DB.
    2) Please provide all the steps that you were identified to install , that would give more clarity to reply back where ever required.
    Thanks,
    Rahul

  • Problem connecting weblogic OSB with IBM websphere via foreign JMS

    Hi All,
    I am trying to setup Foreign JMS. My configuration doesn’t work.
    Could you please let me know if I am missing anything .
    All my configuration details are done as specified in this link http://www.oracle.com/technology/products/integration/service-bus/docs/osb-websphere-whitepaper.pdf
    Here is what I did.
    In OSB sbconsole
    OSB business Service ENDPoint URL jms://webspherehost:9082/sampleQueuemanager/sampleQueue
    In websphere
    Created a queue connection factory and a queue from the webspehere administrator console.
    Modified JSMAdmin.config to enable the following…/Java/bin/JMSAdmin.config.
    INITIAL_CONTEXT_FACTORY=com.sun.jndi.fscontext.RefFSContextFactory
    PROVIDER_URL=file:/C:/JNDI-Directory
    Ran JSMAdmin.bat to bind the JNDI
    def qcf(sampleQueuemanager) qmanager(QMGR) HOSTNAME(webspherehost) PORT(1327) TRANSPORT(CLIENT)
    def Q(sampleQueue) queue(sampleQueue) qmanager(QMGR) PERSISTENCE(PERS)
    InitCtx> dis ctx
    JMSADM4089 InitCtx
    .bindings java.io.File
    bck_.bindings java.io.File
    a sampleQueuemanager com.ibm.mq.jms.MQQueueConnectionFactory
    a sampleQueue com.ibm.mq.jms.MQQueue
    4 Object(s)
    0 Context(s)
    4 Binding(s), 2 Administered
    In weblogic admin console
    Created foreign JMS, destination and connection factory as mentioned in the following link.
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/ConsoleHelp/taskhelp/jms_modules/foreign_servers/CreateForeignConnectionFactories.html
    When I execute business service from OSB sbconsole, this is what I get.
    +The invocation resulted in an error: [JMSPool:169803]JNDI lookup of the JMS connection factory sampleQueuemanager failed: javax.naming.CommunicationException [Root exception is weblogic.socket.UnrecoverableConnectException: [Login failed for an unknown reason: HTTP/1.1 400 Bad Request]].+
    Thanks
    siva

    Little confusing. Are we not supposed to use osb host name and port along with foreign connection factory created in weblogic for OSB BS?.
    You said: jms://webspherehost:9082/sampleQueuemanager/sampleQueue
    We have to jms://osbhost:port/ForeignQueueManagerInWeblogic/ForeignQueueInWeblogic
    Manoj

  • WL fails to install on RedHat 7.1 Linux with IBM JDK

    Attempting to install eval version for Linux. Issue command (as root):
    sh weblogic600sp1_linux.bin -i console
    And get this error consistently.
    [root@LinuxWeb src]# sh /home/curtisf/weblogic600sp1_linux.bin -i console
    Preparing to install...
    /tmp/install.dir.1046/Solaris/resource/jre/jre/bin/java: /usr/bin/cut: No
    such f
    ile or directory
    /tmp/install.dir.1046/Solaris/resource/jre/jre/bin/i386/native_threads/java:
    err
    or while loading shared libraries: libjvm.so: cannot load shared object
    file: No
    such file or directory
    Am running the IBMJava2-13 JVM with no problems with Resin servlet engine
    (and other applications).
    Curtis Forrester
    Personal: [email protected]
    Business: [email protected]
    http://www.cforrester.com

    Hi Nelson,
    Please refer the below link for "Xcelsius Installation on Windows 7  with office 2010"
    Installing Xcelsius 2008
    Links:
    http://scn.sap.com/docs/DOC-25567
    Or
    Tips for Installing Xcelsius 2008 with Office 2010
    Links:
    http://www.clariba.com/blog/tips-for-installing-xcelsius-2008-with-office-2010/
    Thanks,
    Daya

  • IBM JDK 6 32bit & 64bit Reflection Invoke issue on Weblogic 10.3

    We just found a issue on Weblogic 10.3 with IBM JDK 6 32bit, which calls different method during reflection invoke with that been processed under 64bit JDK, here is my source code:
    public class ButtonTag extends InputTag {
    private boolean checkNotNull = false;
    public void setCheckNotNull(Object checkNotNull) {
    public void setCheckNotNull(boolean checkNotNull) {
    this.checkNotNull = checkNotNull;
    this.setUserSetCheckNotNull(true);
    Under 64bit, reflection invoke will call setCheckNotNull(boolean checkNotNull), however under 32bit, it will call setCheckNotNull(Object checkNotNull), actually 32bit version is doing something wrong, we are not sure it is a issue of weblogic or IBM JDK, pls refer the information below for details, Thanks
    OS: AIX 5.3
    AIX@ /usr/java6/bin./java -version
    java version "1.6.0"
    Java(TM) SE Runtime Environment (build pap3260sr2-20080818_01(SR2))
    IBM J9 VM (build 2.4, J2RE 1.6.0 IBM J9 2.4 AIX ppc-32 jvmap3260-20080816_22093 (JIT enabled, AOT enabled)
    J9VM - 20080816_022093_bHdSMr
    JIT - r9_20080721_1330ifx2
    GC - 20080724_AA)
    JCL - 20080808_02
    AIX@ /usr/java6_64/bin./java -version
    java version "1.6.0"
    Java(TM) SE Runtime Environment (build pap6460sr6-20090925_01(SR6))
    IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr6-20090923_42924 (JIT enabled, AOT enabled)
    J9VM - 20090923_042924
    JIT - r9_20090902_1330ifx1
    GC - 20090817_AA)
    JCL - 20090924_01
    AIX server107 3 5 00CE9E7B4C00

    The problem was the name of the Seam EJB module. Changing the jar to jboss-seam.jar, everything worked. This issue does not appear on JBoss 4.2.3.GA, where I also tested.
    Edited by: deadlock_gr on Jun 10, 2010 9:55 AM
    Edited by: deadlock_gr on Jun 10, 2010 9:56 AM

  • How to configure weblogic client in IBM JRE

    I'm trying to get a java client (Lotus Domino java agent) app to connect to
    Weblogic 6.1 sp3.
    Both run separately fine.
    Domino is running with IBM JDK version :
    java version "1.3.1"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1)
    Classic VM (build 1.3.1, J2RE 1.3.1 IBM Windows 32 build cn131-20020710 (JIT
    enabled: jitc))
    I put weblogic.jar in the app's classpath but when i try to get an
    InitialContext, I get the following stack trace :
    04/04/2003 16:04:35 HTTP JVM: weblogic.utils.AssertionError: ***** ASSERTION
    FAILED *****[ Assertion violated ]
    04/04/2003 16:04:35 HTTP JVM: at weblogic.utils.Debug.assert(Debug.java:74)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:123)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:106)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.computeInterfaces(ClientRuntim
    eDescriptor.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.intern(ClientRuntimeDescriptor
    .java:111)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFacto
    ryDelegate.java:154)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName1(Native Method)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName(Class.java:142)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
    ory.java:145)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.init(InitialContext.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.<init>(InitialContext.java:174)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.<init>(EJBHomeFactory.java:29)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.getFactory(EJBHomeFactory.java:49)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.lookUpHome(EJBHomeFactory.java:56)
    04/04/2003 16:04:35 HTTP JVM: at WQO.NotesMain(WQO.java:13)
    04/04/2003 16:04:35 HTTP JVM: at lotus.domino.AgentBase.runNotes(Unknown
    Source)
    04/04/2003 16:04:35 HTTP JVM: at
    lotus.domino.NotesThread.run(NotesThread.java:208)
    04/04/2003 16:04:35 HTTP JVM: weblogic.utils.AssertionError: ***** ASSERTION
    FAILED *****[ Assertion violated ]
    04/04/2003 16:04:35 HTTP JVM: at weblogic.utils.Debug.assert(Debug.java:74)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:123)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:106)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.computeInterfaces(ClientRuntim
    eDescriptor.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.intern(ClientRuntimeDescriptor
    .java:111)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFacto
    ryDelegate.java:154)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName1(Native Method)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName(Class.java:142)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
    ory.java:145)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.init(InitialContext.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.<init>(InitialContext.java:174)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.<init>(EJBHomeFactory.java:29)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.getFactory(EJBHomeFactory.java:49)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.lookUpHome(EJBHomeFactory.java:56)
    04/04/2003 16:04:35 HTTP JVM: at WQO.NotesMain(WQO.java:13)
    04/04/2003 16:04:35 HTTP JVM: at lotus.domino.AgentBase.runNotes(Unknown
    Source)
    04/04/2003 16:04:35 HTTP JVM: at
    lotus.domino.NotesThread.run(NotesThread.java:208)
    Anybody have any idea what is going on?
    Thanks.

    Sorry, forgot to mention : both are running on separate boxers running W2K
    sp3.
    I will however see if i can change any of the vm parameters like jit
    j.
    "Wayne W. Scott" <[email protected]> wrote in message
    news:[email protected]...
    >
    Well, I guess you are running on AIX 4.3.3. First make sure PTF 9 is onthe OS.
    >
    Next, check with IBM for updates to that JDK. I believe they have an SP2.
    Finally, turn off jit. Then see how the system behaves.
    Wayne Scott
    Jo Willems wrote:
    I'm trying to get a java client (Lotus Domino java agent) app to connect
    to
    Weblogic 6.1 sp3.
    Both run separately fine.
    Domino is running with IBM JDK version :
    java version "1.3.1"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1)
    Classic VM (build 1.3.1, J2RE 1.3.1 IBM Windows 32 build cn131-20020710(JIT
    enabled: jitc))
    I put weblogic.jar in the app's classpath but when i try to get an
    InitialContext, I get the following stack trace :
    04/04/2003 16:04:35 HTTP JVM: weblogic.utils.AssertionError: *****ASSERTION
    FAILED *****[ Assertion violated ]
    04/04/2003 16:04:35 HTTP JVM: atweblogic.utils.Debug.assert(Debug.java:74)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:123)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:106)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.computeInterfaces(ClientRuntim
    eDescriptor.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.intern(ClientRuntimeDescriptor
    ..java:111)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFacto
    ryDelegate.java:154)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName1(Native Method)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName(Class.java:142)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
    ory.java:145)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.init(InitialContext.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.<init>(InitialContext.java:174)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.<init>(EJBHomeFactory.java:29)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.getFactory(EJBHomeFactory.java:49)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.lookUpHome(EJBHomeFactory.java:56)
    04/04/2003 16:04:35 HTTP JVM: at WQO.NotesMain(WQO.java:13)
    04/04/2003 16:04:35 HTTP JVM: at lotus.domino.AgentBase.runNotes(Unknown
    Source)
    04/04/2003 16:04:35 HTTP JVM: at
    lotus.domino.NotesThread.run(NotesThread.java:208)
    04/04/2003 16:04:35 HTTP JVM: weblogic.utils.AssertionError: *****ASSERTION
    FAILED *****[ Assertion violated ]
    04/04/2003 16:04:35 HTTP JVM: atweblogic.utils.Debug.assert(Debug.java:74)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:123)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:106)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.computeInterfaces(ClientRuntim
    eDescriptor.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.rmi.internal.ClientRuntimeDescriptor.intern(ClientRuntimeDescriptor
    ..java:111)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFacto
    ryDelegate.java:154)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName1(Native Method)
    04/04/2003 16:04:35 HTTP JVM: at java.lang.Class.forName(Class.java:142)
    04/04/2003 16:04:35 HTTP JVM: at
    weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
    ory.java:145)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.init(InitialContext.java:218)
    04/04/2003 16:04:35 HTTP JVM: at
    javax.naming.InitialContext.<init>(InitialContext.java:174)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.<init>(EJBHomeFactory.java:29)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.getFactory(EJBHomeFactory.java:49)
    04/04/2003 16:04:35 HTTP JVM: at
    com.approach.domino.util.EJBHomeFactory.lookUpHome(EJBHomeFactory.java:56)
    04/04/2003 16:04:35 HTTP JVM: at WQO.NotesMain(WQO.java:13)
    04/04/2003 16:04:35 HTTP JVM: at lotus.domino.AgentBase.runNotes(Unknown
    Source)
    04/04/2003 16:04:35 HTTP JVM: at
    lotus.domino.NotesThread.run(NotesThread.java:208)
    Anybody have any idea what is going on?
    Thanks.

  • Encryption program does not work in IBM JDK

    Hi
    I have a encrypt, decrypt program, which does not work in IBM JDK
    the code is as below, it gives PBEWithMD5AndDES does not exist kind of error when running with IBM JDK
    import java.io.UnsupportedEncodingException;
    import java.security.spec.AlgorithmParameterSpec;
    import java.security.spec.KeySpec;
    import javax.crypto.Cipher;
    import javax.crypto.IllegalBlockSizeException;
    import javax.crypto.SecretKey;
    import javax.crypto.SecretKeyFactory;
    import javax.crypto.spec.PBEKeySpec;
    import javax.crypto.spec.PBEParameterSpec;
    public class MapsPasswordUtil
         Cipher ecipher;
         Cipher dcipher;
         // 8-byte Salt
         byte[] salt = { (byte) 0xA9, (byte) 0x9B, (byte) 0xC8, (byte) 0x32,
                   (byte) 0x56, (byte) 0x35, (byte) 0xE3, (byte) 0x03 };
         // Iteration count
         int iterationCount = 19;
         public MapsPasswordUtil(String passPhrase)
              try
                   KeySpec keySpec = new PBEKeySpec(passPhrase.toCharArray(), salt,
                             iterationCount);
                   SecretKey key = SecretKeyFactory.getInstance("PBEWithMD5AndDES")
                             .generateSecret(keySpec);
                   ecipher = Cipher.getInstance(key.getAlgorithm());
                   dcipher = Cipher.getInstance(key.getAlgorithm());
                   // Prepare the parameter to the ciphers
                   AlgorithmParameterSpec paramSpec = new PBEParameterSpec(salt,
                             iterationCount);
                   // Create the ciphers
                   ecipher.init(Cipher.ENCRYPT_MODE, key, paramSpec);
                   dcipher.init(Cipher.DECRYPT_MODE, key, paramSpec);
              } catch (java.security.InvalidAlgorithmParameterException e)
                   e.printStackTrace();
              } catch (java.security.spec.InvalidKeySpecException e)
                   e.printStackTrace();
              } catch (javax.crypto.NoSuchPaddingException e)
                   e.printStackTrace();
              } catch (java.security.NoSuchAlgorithmException e)
                   e.printStackTrace();
              } catch (java.security.InvalidKeyException e)
                   e.printStackTrace();
         public String encrypt(String str)
              try
                   // Encode the string into bytes using utf-8
                   byte[] utf8 = str.getBytes("UTF8");
                   // Encrypt
                   byte[] enc = ecipher.doFinal(utf8);
                   // Encode bytes to base64 to get a string
                   return new sun.misc.BASE64Encoder().encode(enc);
              } catch (javax.crypto.BadPaddingException e)
                   e.printStackTrace();
              } catch (IllegalBlockSizeException e)
                   e.printStackTrace();
              } catch (UnsupportedEncodingException e)
                   e.printStackTrace();
              return null;
         public String decrypt(String str)
              try
                   // Decode base64 to get bytes
                   byte[] dec = new sun.misc.BASE64Decoder().decodeBuffer(str);
                   // Decrypt
                   byte[] utf8 = dcipher.doFinal(dec);
                   // Decode using utf-8
                   return new String(utf8, "UTF8");
              } catch (javax.crypto.BadPaddingException e)
                   e.printStackTrace();
              } catch (IllegalBlockSizeException e)
                   e.printStackTrace();
              } catch (UnsupportedEncodingException e)
                   e.printStackTrace();
              } catch (java.io.IOException e)
                   e.printStackTrace();
              return null;
    }

    Works for me with the latest IBM JDK. You will need to specify your context i.e. what platform, what JDK/JRE etc etc etc.
    P.S. That exception handling is rubbish.
    Edited by: sabre150 on Mar 23, 2009 6:01 AM
    I suspect that you are using JDK 1.5 and that you have fallen foul of the bug where key.getAlgorithm() does net return the correct value. You get round this by specifying it as             SecretKey key = SecretKeyFactory.getInstance("PBEWithMD5AndDES").generateSecret(keySpec);
                ecipher = Cipher.getInstance("PBEWithMD5AndDES");Of course if you are clever you will just define a static final constant for this algorithm.
    Edited by: sabre150 on Mar 23, 2009 6:09 AM

  • SHA Message Digest Algo not supported by IBM JDK

    Hi,
    When I run an application with IBM's JDK, am getting the following exception:
    "java.lang.SecurityException: SHA MessageDigest not available"
    Any idea on how to create support for this Message Digest algo? One way is to use provider, I guess. But I don't know how to use a provider & where to get it from. Any suggestions/thoughts?
    Regards,
    GSP

    In my code, a class extends java.rmi.server.UnicastRemoteObject. & the exception occurs when this class is run with IBM JDK. The stack trace is:
    java.lang.SecurityException: SHA MessageDigest not available
    at sun.rmi.server.Util.computeMethodHash(Util.java:378)
    at sun.rmi.server.UnicastServerRef$HashToMethod_Maps.createMap(UnicastServerRef.java:544)
    at sun.rmi.server.WeakClassHashMap.getMap(WeakClassHashMap.java:71)
    at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:196)
    at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:306)
    at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:248)
    at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:146)
    at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:132)
    at Engine.<init>(Unknown Source)
    where Engine is the class that extends UnicastRemoteObject.

  • IBM AIX Platform and IBM JDK

    Hi,
    We are having out of memory issue on IBM AIX 5.3 version and IBM JDK 1.4.2 J9. All the settings for jvm parameters have been made as per sap recommendations.  Now that we need to debug this issue using some java profiler tool. We tried using Sherlok but this does't seem to work on AIX platform. SAP Memory analyzer is a great tool but unfortunately is not supported with IBM JDK.
    so what is the best way to troubleshoot out of memory heap issues ? which tools needs to be used for ibm platform and ibm jdk ?

    Hi,
    unfortunately I do not have a good answer for you. We are working together with IBM to enable the Memory Analyzer read IBM system dumps. However, this will take another 6 months to materialize.
    In the meantime, the Diagnostics Guide (http://www-128.ibm.com/developerworks/java/jdk/diagnosis/index.html) might be helpful. Also look for HeapAnalzer and HeapRoots.
    Andreas.

  • Bug in WebLogic 8.1 SP4 for IBM JDK 1.4.2?

    Hello,
    <p>
    In a previous thread i posted (http://forums.bea.com/bea/thread.jspa?threadID=600006934&tstart=0), I reported that we had problems in trying to use JAAS in connecting Acegi with WebLogic 8.1 SP4 on IBM JDK 1.4.2
    <p>
    We did some more research and found the following:
    <br>
    WebLogic uses the class <i>weblogic.security.service.ServerConfiguration</i> for reading the JAAS config file. This class extends the default <i>javax.security.auth.login.Configuration</i> class. To see what's going on we decompiled the class and it looks like this:
    <p>
    <i>
    try {
         // code omitted.
    } catch (Exception exception) {
         String s1 = System.getProperty("login.configuration.provider");
         if(s1 == null)
         s1 = "com.sun.security.auth.login.ConfigFile";
         if(!s1.equals("weblogic.security.service.ServerConfiguration"))
         try
              Configuration configuration = (Configuration)Class.forName(s1).newInstance();
              configuration.refresh();
              aappconfigurationentry = configuration.getAppConfigurationEntry(s);
         catch(Exception exception1) { }
    </i>
    <p>
    The following happens when trying to authenticate through JAAS:
    <p>
    - The "omitted code" throws the Exception <i>weblogic.security.service.InvalidParameterException: [Security:090396]Security Realm sample does not exist</i>.
    <p>
    Why is this Exception thrown? Why does the name of my JAAS configuration in the JAAS config file needs to be the same as a Security Realm? Or this try-catch block used as some kind of control flow and is this exception expected?
    <p>
    - Then in the catch block the <b>System</b>.property <i>login.configuration.provider</i> is retrieved. However the JDK Specification of the class <i>javax.security.auth.login.Configuration</i> (sse the javadoc) states that:<p>
    <i>The default Configuration implementation can be changed by setting the value of the "login.configuration.provider" security property (in the Java security properties file) to the fully qualified name of the desired Configuration implementation class</i>
    <p>
    So because the <b>System</b> property is read instead of the <b>Security</b> property (which contains the correct IBM class), <i>null</i> is returned. Is this a bug?
    <p>
    - Because the System property is <i>null</i> the code then tries to load the class <i>com.sun.security.auth.login.ConfigFile</i>, which of course is not present in the IBM JDK, and a ClassNotFoundException is thrown. Since
    the Exception is swallowed by the nested catch block we will not see this exception and <i>null</i> is returned that eventually leads to the "No LoginModule found..." exception.
    <p>
    So to summarize, my questions are these:
    <p>
    - Does the name of the JAAS configuration in the JAAS config file need to be the same as the name of the Realm? And if so why?<br>
    - Is it a bug that instead of reading the <b>Security</b> this code is reading the <b>System</b> property?
    <p><p>
    Regards,<br>
    Lars Vonk
    <p>
    PS<br>
    As a workaround we set the System property <i>login.configuration.provider</i> to the correct value <i>com.ibm.security.auth.login.ConfigFile</i> and then it works.

    Sorry, i saw the forum about your problem in BEA 8.1 SP 6 about a
    weblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:235)
    error and you said that bea sent a path named CR295205_810sp6.jar.
    I have the same problem
    Do you have this patch?
    Could you send it to me?
    my email address is
    [email protected]

  • OAS 10.1.3 PatchSet 3 on IBM AIX 5.3 installs a 2 year old IBM JDK - why ?

    We're running OAS 10.1.3.0.0 on IBM AIX 5.3 and due to some crashing issues OSS recommended to upgrade to PatchSet 3 (so 10.1.3.3.0).
    We originally were running OAS with IBM's SR4 of the IBM JDK.
    Now after the upgrade to Patchset 3 (on a test machine), the ORACLE_HOME/jdk version seems to be the first release of the v5 jdk from 2005. It's SR nothing ... J2RE 1.5.0 IBM AIX build jclap32dev-20051102 java
    It's 2 years old for heavans sake !!!! Not even DST patched.
    What am I missing? OAS 10.1.3.3.0 is pretty much THEE most latest version of OAS Oracle has, yet it comes with a 2 year old JDK. Why? This doesn't sound right, why would a company of Oracle stature do this?
    Are others experiencing this also? Why doesn't Oracle bundle a more updated JDK with OAS?

    It's not a symlink.
    Oracle has a script (jdkfix.sh) and a procedure for upgrading the jdk inside OH/jdk. We went thru this on all our OAS 10.1.2.0.2 enviro's and 10.1.3.0.0.
    One metalink note that talks about this is Doc. 272808.1.
    Basically, you install the AIX jdk in the IBM /usr directory and then run jdkfix.sh which essentially copies the jdk over to ORACLE_HOME/jdk.
    There don't seem to be any Oracle supplied patches for any OAS that upgrades the jdk. Which is a bit wonky.
    Here's the ls -l from our prod OAS 10.1.3.0.0 install:
    drwx------   6 oracle   oinstall        256 Nov 29 2006  Apache
    drwx------   5 oracle   oinstall        256 Nov 29 2006  BC4J
    drwx------   5 oracle   oinstall       4096 Mar 04 2007  OPatch
    drwx------   5 oracle   oinstall        256 Nov 29 2006  ant
    drwx------   3 oracle   oinstall        256 Nov 29 2006  assistants
    drwx------   6 oracle   oinstall       4096 Nov 29 2006  backup_restore
    drwx------   2 oracle   oinstall       4096 Nov 29 2006  bin
    drwx------   2 oracle   oinstall        256 Nov 29 2006  cfgtoollogs
    drwx------   5 oracle   oinstall        256 Nov 29 2006  chgip
    drwx------   2 oracle   oinstall        256 Nov 29 2006  config
    drwx------   8 oracle   oinstall        256 Nov 29 2006  datadirect
    drwx------   4 oracle   oinstall        256 Nov 29 2006  diagnostics
    drwx------   7 oracle   oinstall       4096 Nov 29 2006  dsa
    drwx------   3 oracle   oinstall        256 Nov 29 2006  emdw
    drwx------   3 oracle   oinstall        256 Nov 29 2006  encryption
    drwx------   4 oracle   oinstall        256 Nov 29 2006  has
    drwx------   3 oracle   oinstall        256 Nov 29 2006  hs
    drwx------   5 oracle   oinstall        256 Nov 29 2006  iaspt
    drwxr-xr-x   2 oracle   oinstall        256 Dec 20 2006  ibmFix
    drwx------   3 oracle   oinstall        256 Nov 29 2006  install
    -rw-------   1 oracle   oinstall         38 Nov 29 2006  install.platform
    drwx------  13 oracle   oinstall       4096 Mar 04 2007  inventory
    drwx------   5 oracle   oinstall        256 Dec 03 2006  j2ee
    drwx------   6 oracle   oinstall        256 Nov 29 2006  javacache
    drwx------   3 oracle   oinstall        256 Nov 29 2006  javavm
    drwx------   4 oracle   oinstall        256 Nov 29 2006  jdbc
    drwxr-xr-x   7 oracle   oinstall        256 Mar 14 2007  jdk
    drwxr-xr-x   7 oracle   system          256 Dec 20 2006  jdk.141
    drwx---r-x   8 oracle   oinstall        256 Nov 29 2006  jdk.bundled
    drwx------   2 oracle   oinstall       4096 Nov 29 2006  jlib
    drwx------   3 oracle   oinstall        256 Nov 29 2006  jre
    drwx------   8 oracle   oinstall        256 Nov 29 2006  ldap
    drwx------   2 oracle   oinstall      12288 Nov 29 2006  lib
    drwx------   2 oracle   oinstall      12288 Nov 29 2006  lib32
    drwx------   3 oracle   oinstall        256 Nov 29 2006  mds
    drwx------  12 oracle   oinstall       4096 Nov 29 2006  network
    drwx------   5 oracle   oinstall        256 Nov 29 2006  nls
    drwxr-xr-x  10 oracle   oinstall       4096 Jan 28 2007  opmn
    drwx------   4 oracle   oinstall        256 Nov 29 2006  opsm
    -rw-r--r--   1 oracle   oinstall         55 Nov 28 2006  oraInst.loc
    drwx------   4 oracle   oinstall        256 Nov 29 2006  oracore
    drwx------   4 oracle   oinstall        256 Nov 29 2006  ord
    drwx------   6 oracle   oinstall        256 Nov 29 2006  oui
    drwx------   4 oracle   oinstall        256 Nov 29 2006  owm
    -rw-r-----   1 oracle   oinstall     312588 Mar 04 2007  p2617419_10102_GENERIC_OPATCH.zip
    drwx------   6 oracle   oinstall        256 Nov 29 2006  perl
    drwx------   5 oracle   oinstall        256 Nov 29 2006  plsql
    drwx------   6 oracle   oinstall        256 Nov 29 2006  precomp
    drwx------  10 oracle   oinstall        256 Nov 29 2006  rdbms
    drwx------   3 oracle   oinstall        256 Nov 29 2006  relnotes
    -rwx------   1 oracle   oinstall       5532 Nov 29 2006  root.sh
    drwx------   4 oracle   oinstall        256 Nov 29 2006  rules
    drwx------   3 oracle   oinstall        256 Nov 29 2006  slax
    drwx------   3 oracle   oinstall        256 Nov 29 2006  sqlj
    drwx------   7 oracle   oinstall        256 Nov 29 2006  sqlplus
    drwx------   5 oracle   oinstall        256 Nov 29 2006  srvm
    drwx------   4 oracle   oinstall        256 Nov 29 2006  sysman
    drwx------   3 oracle   oinstall        256 Nov 29 2006  tg4sybs
    drwx------   4 oracle   oinstall        256 Nov 29 2006  toplink
    drwx------   4 oracle   oinstall        256 Nov 29 2006  uix
    drwx------   3 oracle   oinstall        256 Nov 29 2006  webservices
    drwx------   4 oracle   oinstall        256 Nov 29 2006  xdk
    drwx------   4 oracle   oinstall        256 Nov 29 2006  xdsOn our test OAS 10.1.3.3.0 machine :
    drwx------   6 oracle   oinstall        256 Oct 04 10:04 Apache
    drwx------   5 oracle   oinstall        256 Oct 04 10:03 BC4J
    drwx------   5 oracle   oinstall        256 Feb 07 15:37 OPatch
    drwx------   5 oracle   oinstall        256 Oct 04 10:03 ant
    drwx------   3 oracle   oinstall        256 Oct 04 10:03 assistants
    drwx------   6 oracle   oinstall       4096 Oct 04 10:01 backup_restore
    drwx------   2 oracle   oinstall       4096 Feb 07 15:43 bin
    drwx------   2 oracle   oinstall        256 Feb 07 15:45 cfgtoollogs
    drwx------   5 oracle   oinstall        256 Oct 04 10:01 chgip
    drwx------   6 oracle   oinstall        256 Feb 07 15:37 clone
    drwx------   2 oracle   oinstall       4096 Feb 07 15:43 config
    drwx------   8 oracle   oinstall        256 Oct 04 09:59 datadirect
    drwx------   2 oracle   oinstall        256 Feb 07 15:39 deconfig
    drwx------   5 oracle   oinstall        256 Feb 07 15:38 diagnostics
    drwx------   7 oracle   oinstall       4096 Feb 07 15:38 dsa
    drwx------   3 oracle   oinstall        256 Oct 04 10:01 emdw
    drwx------   3 oracle   oinstall        256 Oct 04 10:00 encryption
    drwx------   4 oracle   oinstall        256 Oct 04 10:01 has
    drwx------   3 oracle   oinstall        256 Oct 04 10:00 hs
    drwx------   5 oracle   oinstall        256 Oct 04 10:03 iaspt
    drwx------   3 oracle   oinstall       4096 Feb 07 15:43 install
    -rw-------   1 oracle   oinstall         38 Oct 04 09:58 install.platform
    drwx------  14 oracle   oinstall       4096 Feb 07 15:46 inventory
    drwx------   5 oracle   oinstall        256 Oct 10 17:11 j2ee
    drwx------   6 oracle   oinstall        256 Oct 04 10:02 javacache
    drwx------   3 oracle   oinstall        256 Oct 04 10:00 javavm
    drwx------   4 oracle   oinstall        256 Oct 04 10:03 jdbc
    drwx---r-x   8 oracle   oinstall        256 Oct 04 09:59 jdk
    drwx------   2 oracle   oinstall       4096 Feb 07 15:39 jlib
    drwx------   3 oracle   oinstall        256 Oct 04 09:59 jre
    drwx------   8 oracle   oinstall        256 Oct 04 10:02 ldap
    drwx------   2 oracle   oinstall       8192 Feb 07 15:46 lib
    drwx------   2 oracle   oinstall       8192 Feb 07 15:46 lib32
    drwx------   3 oracle   oinstall        256 Oct 04 10:03 mds
    drwx------  12 oracle   oinstall       4096 Oct 04 10:07 network
    drwx------   5 oracle   oinstall        256 Oct 04 10:02 nls
    drwx------   3 oracle   oinstall        256 Feb 07 15:43 opatches
    drwx------   7 oracle   oinstall        256 Oct 04 10:02 opmn
    drwx------   4 oracle   oinstall        256 Oct 04 10:00 opsm
    -rw-------   1 oracle   oinstall         68 Jan 12 2007  oraInst.loc
    drwx------   4 oracle   oinstall        256 Oct 04 10:02 oracore
    drwx------   4 oracle   oinstall        256 Oct 04 10:01 ord
    drwx------   6 oracle   oinstall       4096 Feb 07 15:43 oui
    drwx------   4 oracle   oinstall        256 Oct 04 10:03 owm
    drwx------   6 oracle   oinstall        256 Oct 04 10:02 perl
    drwx------   5 oracle   oinstall        256 Oct 04 10:01 plsql
    drwx------   6 oracle   oinstall        256 Oct 04 10:01 precomp
    drwx------  10 oracle   oinstall        256 Oct 04 10:03 rdbms
    drwx------   3 oracle   oinstall        256 Oct 04 10:03 relnotes
    -rwx------   1 oracle   oinstall        607 Feb 07 15:43 root.sh
    -rwx------   1 oracle   oinstall       5510 Oct 04 10:09 root.sh.old
    drwx------   5 oracle   oinstall        256 Feb 07 15:38 rules
    drwx------   3 oracle   oinstall        256 Oct 04 10:01 slax
    drwx------   3 oracle   oinstall        256 Oct 04 10:03 sqlj
    drwx------   7 oracle   oinstall        256 Oct 04 10:03 sqlplus
    drwx------   5 oracle   oinstall        256 Oct 04 10:02 srvm
    drwx------   4 oracle   oinstall        256 Oct 04 10:02 sysman
    drwx------   3 oracle   oinstall        256 Oct 04 10:00 tg4sybs
    drwx------   4 oracle   oinstall        256 Oct 04 10:02 toplink
    drwx------   4 oracle   oinstall        256 Oct 04 10:02 uix
    drwx------   3 oracle   oinstall        256 Oct 04 10:03 webservices
    drwx------   5 oracle   oinstall        256 Feb 07 15:37 xdk
    drwx------   4 oracle   oinstall        256 Oct 04 09:59 xds
    drwx------   4 oracle   oinstall        256 Feb 07 15:38 xqs

  • Fusion middleware OID cluster installation with weblogic domain

    Hi,
    I am trying to install/configure fusion middleware OID 11.1.1.2 cluster with two nodes.
    Installed Databse, Weblogic, Ran RCU for schema creation.
    I installed OID by selecting Create new Domain
    selected clustered check box while installtion.
    Selected OID and DIP for installation and configuration.
    Create domain was sucessfull.
    Deploy oracle directory server was Sucessfull.
    Got Error when deploying Directory Integration platform.
    Error: An internal operation has failed error in configuring DIP-00004 error in connecting to oracle internet directory server.
    I thing apply patch will solve this issue.
    I am able to login to weblogic
    Admin Server, Node manager and manager server are in running state.
    I am able launch enterprise manager.
    OID1 is up.
    I am not able to launch /odsm. any idea?? (tried with different browsers its the same)
    I am applying patch now..hope solves the issue.
    So now OID is deployed on one manager server and i have to add one more server in this cluster.
    I am thinking to do basic weblogic installation on other cluster server then copy the domain from machine1 to machine2.
    Not sure how to setup the other managed server with machine 2 details??
    Please correct me if i followed any wrong step.
    I need steps for Clustering.
    Any idea please help??

    when click on Next button it says "Weblogic server must already be installed".Please see if ("TypeError: unsupported operand type(s) for +: 'NoneType' and 'str'" Signaled When Creating ODI Domain On WebLogic Server [ID 1220075.1]) helps.
    In this configured with EBS instance? If yes, what is the document you have followed to configure it?
    Thanks,
    Hussein

  • Weblogic 9.0 on WinXP 64bit with Sun JDK 64bit

    I installed Weblogic 9.0 on WindowXP 64bit version and it's fine with build in Sun's JDK and JRockit JDK but as soon as I switch to Sun's 64bit implementation of JDK (update 5) it fails to start.
    Am I doing something wrong or it is not compatible with 64bit JDK on windows platform?
    If so are there any plans to make it compatible with Sun's JDK 64bit version on windows platform in the near future, or any chance of 64bit JRockit JDK for windows?

    On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
    > hi
    > [snip]
    > [root@p22 eclipse]# cat eclipse.ini -startup
    > plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
    > --launcher.library
    > plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
    >
    > -showsplash
    > org.eclipse.platform
    > --launcher.XXMaxPermSize
    > 256m
    > --launcher.defaultAction
    > openFile
    > -vmargs
    > -Xms40m
    > -Xmx512m
    > [snip]
    Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
    sticky posts at forum's top for getting started help.

Maybe you are looking for

  • Error when installing itunes 10 on windows 7 64 bit

    why do I keep n getting the error messages when i try and install itunes on windows 7 64 bit. But sometimes it will install but once it gets done it say that something is not install I need to uninstall and reinstall itunes..... is there something I

  • OPEN DATASET code

    Hi all, I have the following code to output data. OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE encoding default. my question is what the format of output file should be? Is there any specific requirement? And if I run this code successfully, I shoul

  • Document Printing Authorization

    Hello, Give me Authorization Alert You are not permitted to perform this action Documents Printing How can we Authorized ? Thanks & Regards Krishna

  • So...one more week and november it's over . . .

    when will be released iTunes 11? If it will not be released in november,I'll be very dissapointed of APPLE   I've waited the whole october for iTunes . . . and nothing,so what now?,november is almost over ((

  • Transferring iTunes between pc to mac

    I just got a MacBook pro, how do I move my iTunes library from my pc to my Mac?