Weblogic Integration to integration Siebel client to MainFrame CICS COBOL Programs

Hi,
Is there a way to connect xml based (i/p/o/p) siebel cleint to send xml i/p and
xml o/p to MainFrame resident Cobol programs.
Assume one to one mappeing between XML to the commarea...?
Appreciate your inputs.
Thanks,
-Manju

can someone help with this??

Similar Messages

Weblogic Integration WLI adapters for Siebel

To integrate with Siebel and Oracle EBS, earlier version of WLI (8.2 & 9) had adapters available with it, but the latest version of WLI 10.2 does not have the adapters.
Can we know what should be the recommended and supported mechanism of integration with Siebel and Oracle EBS for synchronous request response scenarios?

Krish,
You can build a JMS/TIBCO adapter and deploy it on any J2EE CA compliant container.
Pros:
Your adapter can be deployed on any compliant application server (including WLS).
Cons:
The J2EE CA 1.0 specification is very limited when it comes to EAI. It does not
address bi-directional communication (EIS events), asynchronous service invocation
and implementing javax.resource.cci interfaces is not mandatory (these are what come
to mind first, there are others). So, if you don't use WLI, you can't take
advantage of our value added features. TIBCO may have extended JCA as well, I don't
know.
Summary:
If your adapter just sticks to what is specified in the JCA spec, you have total
autonomy, however, you have limited EAI capabilities. If you use the proprietary
extensions provided by a particular vendor (BEA WLI, TIBCO, etc...) then you are
tied the their environment. Until the J2EE Connector Architecture addresses these
EAI issues, you will run into proprietary EAI solutions.
Cheers,
Chris
Krish Khambadkone wrote:
Can one implement an EAI solution with only the weblogic server. There is a need
to interface with TIBCO. Is it mandatory that one use Weblogic Integration for
integration or can we build a JMS/TIBCO adapter and deploy it on just weblogic.
What are the Pros and Cons.
--Krish.

Issue with creating array of custom data type - WebLogic Integration

Hi,
We are doing WebLogic integration with Siebel for which from Siebel side we have generated java wrapper class which has all the methods, input\outputs defined and in\out params are serialized along with get\set methods. Following are the details of the input\output args.
Account_EMRIO.java
public class Account_EMRIO implements Serializable, Cloneable, SiebelHierarchy {
protected String fIntObjectFormat = null;
protected String fMessageType = "Integration Object";
protected String fMessageId = null;
protected String fIntObjectName = "Account_EMR";
protected String fOutputIntObjectName = "Account_EMR";
protected ArrayList <AccountIC> fintObjInst = null;
Above class also includes constructors\overloaded constructor\getters\setters
public AccountIC getfintObjInst() {
if(fintObjInst != null) {
return (AccountIC)fintObjInst.clone();
}else{
return null;
public void setfintObjInst(AccountIC val) {
if(val != null) {
if(fintObjInst == null) {
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
For the nested user defined data type AccountIC, it is defined in another java class as below
AccountIC.java
public class AccountIC implements Serializable, Cloneable, SiebelHierarchy {
protected String fname = null;
protected String fParent_Account_Id= null;
protected String fPrimary_Organization = null;
With the above, I was able to get all the AccountIC in the wsdl correctly and using this I was able to set the input param in the client
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="tns:accountIC" minOccurs="0"/>
</xs:sequence>
<xs:complexType name="accountIC">
<xs:sequence>
<xs:element name="fName" type="xs:string" minOccurs="0"/>
<xs:element name="fParent_Account_Id" type="xs:string" minOccurs="0"/>
<xs:element name="fPrimary_Organization" type="xs:string" minOccurs="0"/>
minOccurs="0"/>
</xs:sequence>
</xs:complexType>
Now, I wanted to make slight difference in getter method of class Account_EMRIO method getfintObjInst so that an array of AccountIC is retured as output.
public ArrayList<AccountIC> getfintObjInst() {
if(fintObjInst != null) {
return (ArrayList<AccountIC>)fintObjInst.clone();
}else{
return null;
With the above change, once the wsdl is generated, I am no longer getting fintObjInst field for AccountIC due to which I am unable to get the array list of accountIC
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
The issue that I am facing here is, we have a custom data type(AccountIC) which has several fields in it. In the output I need a array of AccountIC. In the java bean, when this type was defined as
protected ArrayList <AccountIC> fintObjInst = null; I was unable to get a array of AccountIC. this gets complicated as inside a AccountIC there is array of contacts as well and all the time I am getting just the first records and not a array.
To summarize: How to get xsd:list or maxoccurs property for a field in WSDL for the user defined\custom datatype?
Can someone help me with this.
Thanks,
Sudha.

can someone help with this??

Weblogic Integration 2.1 problem

I have installed Oracle 9.X then installed Weblogic 6.1 and then installed Weblogic Integration 2.1
after instalation i have started Weblogic server by clicking wlintegration2.1/config/bpmDomain/startWeblogic.cmd
Then i am getting this problem
java.rmi.RemoteException: EJB Exception: ; nested exception is:
javax.ejb.EJBException
- with nested exception:
[javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundExcept
ion: Unable to resolve com.bea.wlpi.TXDataSource. Resolved: 'com.bea.wlpi' Unres
olved:'TXDataSource' ; remaining name '']; Link Remaining Name: 'com.bea.wlpi.TX
DataSource']
javax.naming.LinkException: . Root exception is javax.naming.NameNotFoundExcept
ion: Unable to resolve com.bea.wlpi.TXDataSource. Resolved: 'com.bea.wlpi' Unres
olved:'TXDataSource' ; remaining name ''
<<no stack trace available>>
--------------- nested within: ------------------
javax.ejb.EJBException
- with nested exception:
[javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundExcept
ion: Unable to resolve com.bea.wlpi.TXDataSource. Resolved: 'com.bea.wlpi' Unres
olved:'TXDataSource' ; remaining name '']; Link Remaining Name: 'com.bea.wlpi.TX
DataSource']
at com.bea.wlpi.server.plugin.PluginManagerCfgImpl.getConfiguredPlugins(
PluginManagerCfgImpl.java:749)
at com.bea.wlpi.server.plugin.PluginManagerCfgImpl.initializePlugins(Plu
ginManagerCfgImpl.java:873)
at com.bea.wlpi.server.plugin.PluginManagerCfgImpl.init(PluginManagerCfg
Impl.java:80)
at com.bea.wlpi.server.plugin.PluginManagerCfgBean_gebmxi_EOImpl.init(Pl
uginManagerCfgBean_gebmxi_EOImpl.java:1300)
at com.bea.wlpi.server.initlistener.InitListenerBean.onMessage(InitListe
nerBean.java:153)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:254)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:206)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1864)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1819)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
<Oct 31, 2006 4:49:49 PM IST> <Notice> <WebLogicServer> <Started WebLogic Admin
Server "myserver" for domain "bpmdomain" running in Production Mode>
javax.naming.NameNotFoundException: Unable to resolve com.bea.wlpi.TXDataSource.
Resolved: 'com.bea.wlpi' Unresolved:'TXDataSource' ; remaining name ''
<<no stack trace available>>
javax.naming.NameNotFoundException: Unable to resolve com.bea.wlpi.TXDataSource.
Resolved: 'com.bea.wlpi' Unresolved:'TXDataSource' ; remaining name ''
<<no stack trace available>>
javax.naming.NameNotFoundException: Unable to resolve com.bea.wlpi.TXDataSource.
Resolved: 'com.bea.wlpi' Unresolved:'TXDataSource' ; remaining name ''
<<no stack trace available>>
Please resolve this ASAP.

I'm having this issue as well. Can you tell me how you fixed the problem???
Thanks

Cannot run WebLogic Integration Samples from QuickStart

I have installed the full WebLogic platform on an Intel box running Red Hat Linux
8.0. From QuickStart I am unable to run the WebLogic Integration Samples. Everything
else seems to work as expected.
The error message that results when attempting to run the Integration samples
is as follows:
RunSamples execution failed: /usr/local/bea/weblogic700/samples/integration/samples/lib/RunSamples.xml:106:
Cannot execute switchdb pointbase

Dear Micha,
Did you maintain the host file in Drivers\etc file:
hope this will solve the problem
If you did not add them plz add the hosts as follows:
      102.54.94.97     rhino.acme.com          # source server
       38.25.63.10     x.acme.com              # x client host
      (your PI server IP)   server Id name
And also check your Java web start version.
download the correct version for sun website.
Best Regards
Praveen K Kurni

Cisco Phone Control and Presence 8.6.1.1185 with IBM Lotus Notes 8.5.2 (Integrated Sametime Client 8.0.2) - No presence status visible

Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
     - Servers -> IP address of CUCM
     - Read Only -> unchecked
     - Use as Default CUCM -> checked
     - Synchronize Credentials -> checked
          - Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
     - Use Sametime Credentials -> checked
- Sametime User ID Mapping
     - Use Business Card Attribute -> MailAddress
     - Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
Igor

Hi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
     - Enable Phone Status -> active
     - Desk Phone Control -> active
     - no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
     - Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
     - LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor

Weblogic Integration Interview Questions and Answers

Can some one send me WebLogic Integration interview questions and answers to [email protected] and [email protected]
Thank you.

hi all,
can any one help us how to get or retrieve DataSource Names in weblogic using java code.
it is very urgent. please copy the java code here.
Somu :)

Weblogic Integration 10r3 error in msg-header-2_0.xml

Hello,
I am trying to go through te WLI workshops, but cannot publish a WLI process.
The Tutorial_Process_Application RequestQoute.java has the following error in the msg-header-2_0.xml:
Severity and Description Path Resource Location Creation Time Id
Referenced file contains errors (http://www.w3.org/TR/1999/REC-html401-19991224/strict.dtd). For more information, right click on the message and select "Show Details..." Tutorial_Process_Application_Utility/schemas/system msg-header-2_0.xsd line 1 1257804610777 410
A new WLI project from scratch gives te same error, it is as if the msg-header-2_0.xml is not correctly generated when the WLI process is created.

Aha! problem solved :)
The tutorial states : 'Select the Add WebLogic Integration System and Control Schemas to Utility Project check box to add the system schemas to the Schemas folder under the Utility project.'
If you do that it does not work, and i get the errors I discribed in the post, howerver if ypu leave it blanked out, the process can be published, without error or warnings.
As I am new to WLI (use to work with Oracle Bpel) I have no idea about the importance of adding the Integration system and control schemas to the utility project.
However as my goal is to work through the workshops, I wil worry about it later.
Edited by: DaveVQ on 14-nov-2009 5:39

WLST and WebLogic Integration

Hi all,
I have installed WebLogic Integration 8.5 bundle. Meaning i have also installed weblogic server 8.1. on Windows XP
I am now trying to use Weblogic Scripting Tool WLST. But there is no tools on the menu(tools->weblogic scripting tool) this was added in the 9.1 installation...
How do I configure my installation weblogic server 8.1 with WLI8.5 to run WLST?
after i run setELSEnv.cmd to set the environment. Then i try java weblogic.WLST and the error is "java.lang.NoClassDefFoundError: weblogic/WLST"
Where are the libs, how do i configure WLST to run.
I also tried starting the WLST from the 9.1 installation, but it cannot connect to 8.1 installation, tough connecting to 9.1 installation is no problem. If i try i get this error: "weblogic.management.ManagementRuntimeException: java.lang.NoSuchMethodError: isCachable"
(I installed weblogic 9.1 and there the WLST was installed during installation and all works just fine. unfortenatly my system must run on 8.1->wli8.5)

Hi
I am trying to use WLST tool for configuring Weblogic domain in 9.1 OFFLINE.
I have done with almost all except JTA configuration.
Can you please give me smaples for the same.
The following is part iof my script...
readTemplate('F:/AuctionDoc/Installer/inDomain.jar')
cd('/JDBCSystemResource/localNonTxPool/JdbcResource/localNonTxPool')
create('myJdbcDataSourceParams','JDBCDataSourceParams')
cd('JDBCDataSourceParams/NO_NAME_0')
set('JNDIName', 'jdbc/NonTxDataSource')
#JDBC settings and other JMS settings worked
But the JTA settings dint work
#=======================================================================================
# Set JTA timeout
#=======================================================================================
cd("/JTA/inInstDomain")
set("TimeoutSeconds", "1200")
set("AbandonTimeoutSeconds", "1200")
I have to do the above OFFLINE.
I could not locate the JTA folder or any thing related with JTA configuration to do offline using WLST
Can you please give an example of JTA settings
Thanks
Binu

Upgrading a project from Weblogic Integration 8.1.3 to Weblogic Integration

Can anyone offer any advice to assist me in upgrading a project from Weblogic Integration 8.1.3 to Weblogic Integration 9.2.1?
Here are some nuances of the project:
* The JNDI, JDBC, & JMS server resources are secured; access is controlled by Deployment Descriptor run-as/security-role/... tags and custom CSPs
* The application is currently build for deployment using wlwBuild ant task (class in workshop.core.WlwBuildTask which is located in the 8.1.3 {weblogic.home}/workshop/wlw-ide.jar - so far I can't find this class/task in my 9.2.1 install)
* The following are the application characteristics (and utilized WLI features): multiple web apps, EJBs, JMS, Page flow/netUI, web services, WLI controls (process, java, transformation), XMLBeans
* One of the project goals is to not make any functional changes and modify as little code as necessary (the only expected justification for a modification is a) fallout out from the JVM 1.5 upgrade or b) something is no longer available in WLI 9.2)
I know there is a edocs page with a tutorial for upgrading from 8.1.4 or 8.1.5 to 9.2, but I am interested in knowing if anyone has insight on upgrading directly from 8.1.3?
Thanks in advance for any and all assistance.
Regards,
Andy Frank

just as a followup to my original message.. regarding the 8.1.4 install log that had all the warnings with the msi it expected and the different one it found... at the bottom of the log..this is what I got;
Property(S): SourcedirProduct = {AC76BA86-7AD7-1033-7B44-A81300000003}
MSI (s) (6C:30) [11:11:23:828]: Product: Adobe Reader 8.1.4 - Update 'KB408682' installed successfully.
MSI (s) (6C:30) [11:11:23:828]: Product: Adobe Reader 8.1.4 -- Installation operation completed successfully.
when i go into adobe reader -> help -> about i stillget 8.1.3

When will WebLogic Integration 9.2 Certification will be available?

Currently it seems only Integration Developer based on WLI 8.1 is available. Since I am using WLI 9.2 not is not suitable.
Anyone know when BEA plan to have WLI 9.2 certification available

T C wrote:
I have also run into the "Run Database Scripts" dialog box after creation of a domain. When I started the domain I got the following error:
<[Security:090737]An exception occured while getting connection to validate the configuration settings
va.sql.SQLException: [Security:090735]The DBMS connection was not usable
I have BEA 9.2 Platform running on Windows 2000 Professional Service pack 3.
Incidentally, I started pointbase manually (startPointBase.cmd), started PointBase Console (startPointBaseConsole.cmd) in order to execute the SQLAuthenticator.sql script. This all failed because this SQL script refers to tables GROUPS and USERS, which did not exist in my PointBase schema.
What worked for me was:
1. Create a new domain, and only select Workshop for WebLogic, WebLogic Portal, and WebLogic Integration options.
2. Select YES to Customize Environment and Services Settings tab.
3. Take defaults until the Run Database Scripts dialog box.
4. On the Run Database Scripts dialog box, run the scripts for p13nDatasource and cgDataSource-nonXA.
5. Take default on the remaining steps, and after domain creation the "Run Database Scripts" dialog box shouldn't appear, and the domain should start properly.I'm curious though as what would one do if instead of PointBase DB, we use MS SQL 2000,
for all the relevant databases in an Integration domain? Thanks.
---Nam

When will Weblogic Integration 9.2 release?

Dear all,
Could anyone provide me some information about the release date of Weblogic Integration 9.2?
Cheers,
Xuehui

There is one link here - not sure if it is the one you need
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
HTH
Srini

Understanding Weblogic Integration 9.2

Hi All,
I am very new to Weblogic Integration and we were asked to make our application use WLI. Our application has many source feeds and we also interface with SAP with Web Services calls. I am totally new to Weblogic Integration and I would appreciate if anyone can point me to the starting point. I want to learn how WLI works and how to write controls etc.
I downloaded Weblogic platform and tried to follow through the tutorial that Bea provides, but could not find any help. Tried to search for books online but could not find any. Any help regarding resources i.e. books or online "free" tutorials/courses is greatly appreciated.
Thank you,
S

Sarin,
I have worked on an WLI project,where integration was with SAP.We used iWay adapter to integrate with SAP system.With respect to WLI, you need to learn JPD(Java Process Definition),Data Transformation,XQuery,Event generators,Channel file,need a very good understanding of XSD(Schema Definition).Also you need to work with WLI console(http://localhost:7001/wliconsole),where you can create your business calendars,event generators.The weblogic workshop help would be a good starting point.Again you can find lots of documents at http://www.edocs.bea.com.
Let me know if you have any specific question.
Regards
Bishnu
Edited by bishnu_kumar at 05/21/2007 1:29 AM

Bea Weblogic Integration 9.2 Unix installer

Hi
Can somebody please help me to get Bea Weblogic Integration 9.2 Unix installer ? I want it for developement purpose on unix machine.
I am not able to find it on the oracle product site.
Thank you.

There is one link here - not sure if it is the one you need
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
HTH
Srini

Weblogic Integration 9.2 - Domain Configuration SQLAuthenticator

hi

After downloading, the new vesrion, I started to use the Configuration Wizard to set up a Test Domain.

At the completion of the configuration, the following message is presented:

"This domain is configured to use the SQL authenticator security provider. You must load database tables in the "Run Database Scripts" panel or load the tables manually after completing the wizard using the SQL file located at ..... /security/SQLAuthenticator.sql"

1: This is something new as far as I can tell. At least I've never encountered it and I have installed earler versions of 9.2, ALSB recently

2: when setting up a new domain, neither the server nor pointbase are running. Hence the scripts cant be run from withiin the Config Wizard.

3: Cant start the Admin server for the new domain because the tables are not set up

4: How do I run the .sql script manually? I'm assuming the PB Console but I dont actually know the Pointbase Datbase name that I should connect to for this purpose

5: I can't find any discussion of this in the release notes, upgrade notes etc.

So I'm stuck. This seems a pretty strange way to do things. Any advise would be appreciated.

Regards

Jim Nicolson

T C wrote:
I have also run into the "Run Database Scripts" dialog box after creation of a domain. When I started the domain I got the following error:
<[Security:090737]An exception occured while getting connection to validate the configuration settings
va.sql.SQLException: [Security:090735]The DBMS connection was not usable
I have BEA 9.2 Platform running on Windows 2000 Professional Service pack 3.
Incidentally, I started pointbase manually (startPointBase.cmd), started PointBase Console (startPointBaseConsole.cmd) in order to execute the SQLAuthenticator.sql script. This all failed because this SQL script refers to tables GROUPS and USERS, which did not exist in my PointBase schema.
What worked for me was:
1. Create a new domain, and only select Workshop for WebLogic, WebLogic Portal, and WebLogic Integration options.
2. Select YES to Customize Environment and Services Settings tab.
3. Take defaults until the Run Database Scripts dialog box.
4. On the Run Database Scripts dialog box, run the scripts for p13nDatasource and cgDataSource-nonXA.
5. Take default on the remaining steps, and after domain creation the "Run Database Scripts" dialog box shouldn't appear, and the domain should start properly.I'm curious though as what would one do if instead of PointBase DB, we use MS SQL 2000,
for all the relevant databases in an Integration domain? Thanks.
---Nam

Weblogic Integration to integration Siebel client to MainFrame CICS COBOL Programs

Similar Messages

Maybe you are looking for