Weblogic nohup problem when its rotated

Hi All!
Hi All
I hope anyone can help me, i have an j2ee app under weblogic 8.1 server, i redirect the log to an external file (nohup.out), this file grows fast and i use a cron calling a script to rotate it everyday at 00:05 hrs. and the server stills running, everything is ok, but when the rotate file is calling uses the next command 'cat /dev/null > nohup.out' to resize the nohup file to 0 kbs, then when someting is write on the nohup the file grows as its first size, writting binaries to replace the info erased before, how can i rotate my nohup without that problem ocurs and without shutting down my server everyday!! Thanks!!!
Oscar Badillo

This is nohup.out
8196
starting
Jumpy is = ::::::::::::::
/dmm
12121212
8264
starting
Jumpy is = ::::::::::::::
/dmm
12121212
8264
starting
Jumpy is = ::::::::::::::
/dmm
12121212
8264
starting
Jumpy is = ::::::::::::::
/dmm
12121212
8264
starting
Jumpy is = ::::::::::::::
/dmm
12121212
8264

Similar Messages

BRUSH: Angle Jitter- Direction problem when using Rotate View

(Photoshop CS5 Extended, MAC OSX) When using the brush tool(with angle jitter set to Direction), an error pops up when also rotating view. As long as the canvas is at its default orientation(ie, rotate view tool has not been used), the brush paints along its path appropriately. If I've rotated the view, however, each instance of the brush's preset/tip does not adjust for the new orientation of the canvas. (note: this was not an issue in CS4)
eg: if the brush's preset looks like this (a small horizontal dash):
- when painting as I've described, it should follow a straight line like this (and does, as long as I have not used the Rotate View tool): ------------------------ however, if Rotate View is used to rotate the canvas by 90 degrees, it instead paints like this: IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Actual Screenshots: Brush Presets:
Brush Options:
Painting @ 0 degree rotation
Rotate 90 degrees
draw
Rotate to 139 degrees
draw

Oh, and just to be clear - this is a request for help/solutions

Authentication for user weblogic denied problem when starting managed serve

Hi All,
I have a strange situation here. I installed WLS and SOA and BAM servers. Initially I could start both WLS and SOA.
Later I changed some files (possibly startManagedWebLogic.sh or deleted soa_server1/data/ldap/ or AdminServer/security/boot.properties), but later I remember I changed them back. I am now seeing that my WLS is starting up fine, but SOA is not. I am always getting the error:
<Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
>
I tried to go to admin console to change/verify the password for weblogic user, and then put plaintext password in AdminServer/security/boot.properties, then restart Adminserver. But I still cannot start SOA server.
Could you please let me know how to resolve this issue? I do want to save my environment at this point. Many thanks.

Hi,
My understanding is admin user server is coming up fine but when you try to bring the soa_server1(managed instance) is not coming up due the below mentioned exception.
If not please correct me.
I have a few query, please give me comment on this.
1) Admin and managed instances are running on the same box or different
2) Did you try to reset the password from console or using weblogic.security command
3) Did you cleared the soa_server1 temp directory(server/soa_server1/*)
Solution-1 (If Domain running on different box)
=============================
1) Copy the DefaultAuthenticatorInit.ldift file from Domain_dir/Security/ to Remote machine - Domain_dir/Security/
Note- Remote machine - take a backup of DefaultAuthenticatorInit file.
2) Remote machine- rename or take a backup of ldap directory and boot.properties file
/servers/soa_server1/ldap
/servers/soa_server1/security/boot.properties.
3) Now try to brought up the soa_server1.It will prompt you the username and password.
Please let me know.
Thanks,
Rajkumar

Problem when using weblogic.jspc from an IDE

I am trying to call JSPC from an IDE (as part of an Eclipse Builder). To optimize performance I want to avoid to spwan a new process. So I am trying to call weblogic.jspc's main method directly from the IDE. Everything works fine for simple simple pages.
          But when the page refers to a tag library with a tag providing a TagExtraInfo class, weblogic.jspc complains about the class not extending the TagExtraInfo base class although it does:
          Errors encountered while compiling 'D:\vrp-localdeploy\applications\wot\WOT' :
          Translation of /rentalcar/tiles/i18n/CarCapacityView.jsp failed: (line 17): Error in using tag library uri='/tags/i18n' prefix='i18n': For tag 'bundle', extra info class 'org.apache.taglibs.i18n.BundleTEI' does not extend javax.servlet.jsp.tagext.TagExtraInfo
          I could not figure out what exactly causes the problem. Using exactly the same settings workes just fine.
          Any suggestions?

The full stack trace reads as follows:
          <p>
          Errors encountered while compiling 'D:\vrp-localdeploy\applications\wot\WOT' :
          <p>
          Translation of /common/include/i18n/definitions.inc failed: (line 17): Error in using tag library uri='/tags/i18n' prefix='i18n': For tag 'bundle', extra info class 'org.apache.taglibs.i18n.BundleTEI' does not extend javax.servlet.jsp.tagext.TagExtraInfo
          <br>
               at weblogic.jspc.runJspc(jspc.java:559)
               at weblogic.jspc.runBodyInternal(jspc.java:410)
               at weblogic.jspc.runBody(jspc.java:319)
               at weblogic.utils.compiler.Tool.run(Tool.java:146)
               at weblogic.utils.compiler.Tool.run(Tool.java:103)
               at weblogic.jspc.main(jspc.java:708)
               at tui.vrp.tools.presentation.builder.PresentationBuilder.compileJSP(PresentationBuilder.java:1173)
               at tui.vrp.tools.presentation.builder.PresentationBuilder.checkResource(PresentationBuilder.java:718)
               at tui.vrp.tools.presentation.builder.PresentationBuilder$PresentationDeltaVisitor.visit(PresentationBuilder.java:102)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:68)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:77)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:77)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:77)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:77)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:77)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:77)
               at org.eclipse.core.internal.events.ResourceDelta.accept(ResourceDelta.java:49)
               at tui.vrp.tools.presentation.builder.PresentationBuilder.incrementalBuild(PresentationBuilder.java:1268)
               at tui.vrp.tools.presentation.builder.PresentationBuilder.build(PresentationBuilder.java:677)
               at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:593)
               at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
               at org.eclipse.core.runtime.Platform.run(Platform.java:783)
               at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:168)
               at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:202)
               at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:231)
               at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
               at org.eclipse.core.runtime.Platform.run(Platform.java:783)
               at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:234)
               at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:253)
               at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:282)
               at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:139)
               at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:200)
               at org.eclipse.core.internal.jobs.Worker.run(Worker.java:76)
          <p>
          Unfortunately it doesn't really give any real reason - it is a general piece of code in jspc to report problems.
          <p>
          But I dug a lot bit deeper into the code and realized that the original problem is a ClassCastException in line 1290 of class StandardTagLib, which reads as follows:
          <p>
               tagextrainfo = (TagExtraInfo)Beans.instantiate(classloader, s3);
          <p>
          This looks quite obvious that the class named by s3 simply is no extension of TagExtraInfo, but unfortunately the only class with that name being referenced by the class path does extend this class. I wondered what the problem might be and came up with the following answer:
          <p>
          The class of the bean instantiated by Beans.instantiate extends a class with the name "javax.servlet.jsp.tagext.TagExtraInfo" which is cast to another class with exactly <b>the same name, but a different class loader</b>. Since neither of the class loaders is parent of the other one, both classes are not considered being the same class although they have the same name. Sounds weird, but exactly this is the problem!
          <p>
          Where does it come from and why it works fine when the tool is executed in a separate thread or on the console?
          <p>
          From my understanding the problem is caused in line 395 of the class weblogic.jspc:
          <p>
               GenericClassLoader genericclassloader = new GenericClassLoader(classpathclassfinder);
          <p>
          This line of code creates a class loader not knowing a parent class loader by which the class weblogic.jspc was loaded. All classes weblogic.jspc is using or calling will be loader by either the same or a parent class loader - this is important to understand. Since TagExtraInfo is directly referenced by StandardTagLib one instance of the class object (the object of type class) will be generated and linked when the class StandardTagLib is instantiated for the first time by the class loader which loaded weblogic.jspc (or by its parent). This is consequence which can not be avoided.
          <p>
          But now look at line 1290 of class StandardTagLib: It explicitly requests the class to be loaded by the GenericClassLoader instantiated in line 395 of the class weblogic.jspc. This class loader, off course, is not aware of the same class just being loaded by another class loader since it has no knowledge of it. It simply creates a fresh copy of the class object, which only differs in the reference to the class loader which created this class object.
          <p>
          Actually, I figured that the following line of code replacing the upper one, would resolve the problem:
          <p>
          GenericClassLoader genericclassloader = new GenericClassLoader(classpathclassfinder, this.getClass().getClassLoader());
          <p>
          Doing this, the GenericClassLoader would know its logical parent by reference and would implicitly - thanks to the implementation of java.lang.ClassLoader - try to find the class using its parent first, would find a valid class, and hence use the same instance of the class object instantiated by the parent class loader. The problem would be solved.
          <p>
          It works fine in the console or under a running application server, because they will always have the weblogic jar in their system class path. ClassLoaders not having a parent are implied to have the system class loader as their parent - the piece of code does work in this case.
          <p>
          Under Eclipse this is no option, off course. We would restrain us to exactly this version of the APIs used by the weblogic version in the system class path.
          <p>
          I was trying to patch this myself by extending weblogic.jspc by my own class to pass on a proper class loader knowing its parent, and I was sort of successful: The problem disappeared. But I can't gain exactly what I am looking for, because the method runJspc with four parameters (around line 447) of weblogic.jspc is private to the class and its public brother always passes true to this method as the fourth parameter - causing jspc to recompile all JSPs instead of just the requested ones.
          <p>
          Everything refers to WL81SP3.
          <p>
          That's were I got stuck currently. I have read some postings about this problem in the internet - some dating far back into the history. So, I have the impression that there have been some folks around with the same problem. I think the patch I suggested does not any harm and I could simply use jspc in my builder without any problems.
          <p>
          Regards,
          <p>
          Elmar Schwarz

Problem when trying to start Weblogic server

Hi,
I have a problem when in was trying to start the weblogic server from the
Weblogic Console.It Loads all the necessary files and finally it comes out
giving an error "Server start message not received in allotted time, server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company

Hi!
I'm quite sure that this is a time out problem. I need about 3 minutes to start
up my weblogic server. It's no problem to start it from a command prompt
(startWeblogic.cmd), but using weblogic console application I always got a time
out after 120 seconds. On a faster computer, where the start up process can be
finished in less then 120 seconds it was no problem to start the server with the
same amount of EJBs.
Does anyone know how to increase the time out parameter for the weblogic console
application?
Best reagards,
Przemek
Ramesh wrote:
Yes Its resource problem i suppose..
My friend who is working with WL advised me to us 128 MB RAM to work with
Weblogic server.
Justin i need one more help
I registered my servlet in Weblogic.properties.But when i try to load
it from the command tab says "Property change error on LOAD".I dont know
what
properties i have to change to load this.
Even the existing example servlets i coundnt Load.!!!!
Can any one help on this problem
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I actually got WL to work on my system yesterday. I found that it was aresource
problem. I had to shut down my X Server; if you don't know what the XServer is,
it's (basically) the app that runs a window manager. It was consuming toomuch
of my processing time. WL is now the only thing running on that machine.
Since you have NT, You may want to try shutting down all uneccesarydevices and
app's.
Ramesh wrote:
My System is
Win NT 4.00
Pentium pro 199 mhz
and 80 mb RAM
Is that because of the Memory Problem?
I dont know because i am able run it well when it trought command
prompt.
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I posted a comment about this last week and have to receive a reply. Ialso saw
a post from April about this and there were no replies to it, either.
My problem exists on Linux whether I use the console or not. What are
the
specs
for your machine?
Mine:
Linux 2.2.15
P/Pro 199 MHx
128 MB RAM
Ramesh wrote:
Hi,
I have a problem when in was trying to start the weblogic server
from
the
Weblogic Console.It Loads all the necessary files and finally it
comes
out
giving an error "Server start message not received in allotted time,server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company--
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Przemyslaw Rychlewski Tech@Spree Software Technology GmbH
mailto:[email protected] http://www.tech.spree.de
Tel +49 (0)30 235 520-34 Bülowstrasse 66
Fax +49 (0)30 217 520-12 10783 Berlin

Please read my problem when I configure Weblogic https

I want to use https protocol and SSL for my web application in Weblogic
I have a problem but I am not sure it's related to configuring Weblogic or not please if you can advice me
I use "openssl" to be my own Certificate Authority (CA)
I used this instructions for using openssl [http://www.g-loaded.eu/2005/11/10/be-your-own-ca/]
after configuring openssl I used these steps for creating my keystore
1. First I use this keytool for creating my private key and public key
keytool -genkeypair -keyalg rsa -keystore ali_keytool.jks -storepass ali120 -alias ali_alias
What is your first and last name?
[Unknown]: AliKhosravi
What is the name of your organizational unit?
[Unknown]: Boors
What is the name of your organization?
[Unknown]: software
What is the name of your City or Locality?
[Unknown]: Tehranali_keytool.jks
What is the name of your State or Province?
[Unknown]: Tehran_Province
What is the two-letter country code for this unit?
[Unknown]: IR
Is CN=AliKhosravi, OU=Boors, O=software, L=Tehran, ST=Tehran_Province, C=IR correct?
[no]: y
2. I create my CSR by this command
keytool -certreq -alias ali_alias -keystore ali_keytool.jks -storepass ali120 -file ali_keytool.csr
3. I sign the ali_keytool.csr by openssl . I do it like this :
openssl x509 -req -in ali_keytool.csr -CA certs/myca.crt -CAkey private/myca.key -out ali_keytool.crt -days 365 -CAcreateserial -CAserial my_ca.seq
4.Now my I have a signed certificate (ali_keytool.crt) and my CA certificate (myca.crt)
and I import CA certificate to my keystore
keytool -import -alias Openssl_ca -file myca.crt -keystore ali_keytool.jks -storepass ali120
5. I import the signed certificate into my keystore by alias of private key
keytool -import -alias ali_alias -file ali_keytool.crt -keystore ali_keytool.jks -storepass ali120
6. I import the CA certificate again into a new keystore for creating Trust
keytool -import -alias my_ca -file myca.crt -keystore ali_keytool_trust.jks -storepass ali120
All steps done without any errors
I used this address for help [http://www.startux.de/java/44-dealing-with-java-keystores]
Now I want to configure kestores ans ssl in Weblogic
7. I go to the Environment-->Servers-->AdminServer-->Keystore tab in wblogic
8. I set "Keystores=Custom Identity and Custom Trust", "Custom Identity Keystore = H:\trust\ali_keytool.jks" , "Custom Identity Keystore Type=jks" ,
"Custom Identity Keystore Passphrase:ali120"
"Confirm Custom Identity Keystore Passphrase=ali120"
"Custom Trust Keystore=H:\trust\ali_keytool_trust.jks" , "Custom Trust Keystore Type=jks" ,
"Custom Trust Keystore Passphrase=ali120" , "Confirm Custom Trust Keystore Passphrase=ali120"
9. Then I go to SSL tab and I set "Identity and Trust Locations=Keystores" , "Private Key Alias=ali_alias" ,"Private Key Passphrase=ali120",
"Confirm Private Key Passphrase=ali120"
10. I go to the General tab and select "SSL Listen Port Enabled"
11. I user Firefox as WebBrowser so I configure my Browser I select Tools-->Options-->ViewCertificates --> Authorities tab
and I import the server certificate here is "myca.crt the openssl certificate"
in Downloading Certificate window I select
"Trust this CA to identify web sites"
"Trust this CA to identify email users"
"Trust this CA to identify software developers"
12. I restart Weblogic
13. I try to loging in weblogic like this "https://127.0.0.1:7002/console"
The webBroser show me this warning:
This Connection is Untrusted
You have asked Firefox to connect
securely to 127.0.0.1:7002, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
I Understand the Risks
I don't know why the WebBrowser show me this warning while I imported the Server Certificate
I don't know that my problem is in configuring WebLogic or FireFox WebBrowser or Keystore
If you know please advice me
Thanks

Moderator Action:
You already aked this question a couple of weeks earlier:
My problem when I enable SSL in Weblogic and I don't have a trusted CA cert
This is a user-to-user forum.
There is no obligation that anyone respond. They will answer if they choose to.
If there is a business need for a resolution, use your service contract privileges and open a support ticket with Oracle Support.
http://www.oracle.com/us/support/contact-068555.html
This duplicate forum post is locked.

I have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....

i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....

If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
You know it is disabled if there is no padlock in the middle of the icon.

Problem when I tried to change weblogic listen port from 7001 to 80

HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!

Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

I am having problems with the InDesign it won't download it keeps saying extract when its about 30% then it says failed. How can i get it to download all the way?

I am having problems with the InDesign it won't download it keeps saying extract when its about 30% then it says failed. How can i get it to download all the way?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

My ipod touch is having problems with the headphone jack when I rotate a little song stops

my ipod touch is having problems with the headphone jack when I rotate a little song stops

Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.

HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

Hafizur Rahman wrote:
when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

TS3694 My iphone 3g is in recovery mode...I connect it to itunes and when i do the recovery the 1015 error shows up...how can i face this problem? Its an emergency

My iphone 3g is in recovery mode...I connect it to itunes and when i do the recovery the 1015 error shows up...how can i face this problem? Its an emergency

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
BTW, this is the iPod touch forum

My problem when I enable SSL in Weblogic and I don't have a trusted CA cert

<h3>Hello
I've enabled weblogic SSL
Now when I want use Weblogic Administration Console with Https protocol it works
But at first when I enter to its addredd my Web Browser(Mozella Firefox) show me this exception </h3>
"+This Connection is Untrusted You have asked Firefox to connect+
+securely to localhost:7002, but we can't confirm that your connection is secure.+
+Normally, when you try to connect securely,+
+sites will present trusted identification to prove that you are+
+going to the right place. However, this site's identity can't be verified+."
<h3>
I know that it's because I don't have any certificate of trusted certificate authorities (however when I add the exception it goes to the administration console)
Suppose I want develop an application for a small company and it uses HTTPS for its loging page and I don't have
any trusted CA certificate , when users want login , web brwoser shows the exception
</h3>
<h3>
Know I want ask
can I create a valid certificate by myself without connecting a trusted certificate authority and doing its official stages ? In other word , can I
be a Trusted Certificate Authority for myself and configure Web Browser for getting rid of that exception ?
My aim is to finding a way to use SSL and make a secure connection without receiving the exception in Web Browser and without
connecting certificate authorities and doing its official corresponding and paying cost
do you have any solution for me ?
Thanks
</h3>

Hi
I enabled SSL Debugging in Weblogic and it show me this log when the WebBrowser want user https :
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 1639942021>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 SSL3/TLS MAC>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 received HANDSHAKE>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ClientHello>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 58>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 1583>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 4>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 SSL3/TLS MAC>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 received ALERT>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.alert.AlertHandler.handleAlertMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at javax.net.ssl.impl.SSLSocketImpl.startHandshake(Unknown Source)
at weblogic.server.channels.DynamicSSLListenThread$1.run(DynamicSSLListenThread.java:130)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <Alert received from peer, notifying peer we received it: com.certicom.tls.record.alert.Alert@47204d1a>
<Jan 4, 2012 4:18:48 PM IRST> <Warning> <Security> <BEA-090482> <BAD_CERTIFICATE alert was received from 172.17.33.59 - 172.17.33.59. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <close(): 424502001>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <close(): 424502001>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 1639942021>
Can it give helpful glue ?
Thanks

I have a problem, when I execute an mapping from Desing Center, its frezeen

I have a problem, when I execute an mapping from Desing Center, its frezeen, this doesnt send error can you help me plis
Ali

If I would be you, I will check mapping activity from backend using (TOAD/SESSION-BROWSER) your map should be under JDBC THIN CLIENT. Also check if your target table is locked by running this query (select
c.owner,
c.object_name,
c.object_type,
b.sid,
b.serial#,
b.status,
b.osuser,
b.machine
from
v$locked_object a ,
v$session b,
dba_objects c
where
b.sid = a.session_id
and
a.object_id = c.object_id;).

Weblogic nohup problem when its rotated

Similar Messages

Maybe you are looking for