Webpass configuration in linux is failing.

I am running into issue where in I am not able configure my webpass with webserver.
webserver does not start after auto updating the httpd.conf. starting webserver resulting in following error.
Cannot load /netpoint/webcomponent/identity/oblix/apps/webpass/bin/libwebpass.so into server: netpoint/webcomponent/identity/oblix/apps/webpass/bin/libwebpass.so: undefined symbol: apr_bucket_type_flush.
I have installed Directory server and webserver first and then installed COREid server (Identity server) .After this installation I have tried to install webpass ,during webpass installation ,webserver fails to come up with above mentioned error.
Please some one help me regarding this.
Note: I am using 7.0.3 version of CoreId
Regards,
Nataraj

I am also facing the same problem..
Appreciate your help on this.
Syntax error on line 1090 of /s0/software_install/oid/Apache/Apache/conf/httpd.conf:
Cannot load /s0/software_install/OracleAccessManager/netpoint/webcomponent/identity/oblix/apps/webpass/bin/libwebpass.so into server: /s0/software_install/OracleAccessManager/netpoint/webcomponent/identity/oblix/apps/webpass/bin/libwebpass.so: undefined symbol: apr_bucket_type_flush
./apachectl start: httpd could not be started
Many thanks in advance

Similar Messages

  • 10g installation on  linux 4 failed

    I trying to install oracle software on linux 4 but installation has been failed please find the below steps
    [oracle@sos02 database]$ ./runInstaller -silent -responseFile /u01/g/Ora_grid10g/DB_SOFT/database/response/standard.rsp
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-01_03-21-55PM. Please wait ...[oracle@sos02 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    You can find a log of this install session at:
    /home/oracle/oraInventory/logs/installActions2011-02-01_03-21-55PM.log
    .................................................................................................... 100% Done.
    Loading Product Information
    ................................................................................................................... 100% Done.
    Analyzing dependencies
    Starting execution of Prerequisites...
    Total No of checks: 11
    Performing check for CertifiedVersions
    Checking operating system requirements ...
    Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
    Actual Result: redhat-4
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for Packages
    Checking operating system package requirements ...
    Checking for make-3.79; found make-1:3.80-6.EL4. Passed
    Checking for binutils-2.14; found binutils-2.15.92.0.2-21. Passed
    Checking for gcc-3.2; found gcc-3.4.6-3. Passed
    Checking for libaio-0.3.96; found libaio-0.3.105-2. Passed
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for Kernel
    Checking kernel parameters
    Checking for semmsl=250; found semmsl=256. Passed
    Checking for semmns=32000; found semmns=32000. Passed
    Checking for semopm=100; found semopm=100. Passed
    Checking for semmni=128; found semmni=142. Passed
    Checking for shmmax=536870912; found shmmax=4294967295. Passed
    Checking for shmmni=4096; found shmmni=4096. Passed
    Checking for shmall=2097152; found shmall=2097152. Passed
    Checking for file-max=65536; found file-max=16025260. Passed
    Checking for VERSION=2.6.9; found VERSION=2.6.9-42.ELsmp. Passed
    Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=9000 - 65500.  Failed <<<<
    Checking for rmem_default=262144; found rmem_default=262144. Passed
    Checking for rmem_max=262144; found rmem_max=4194304. Passed
    Checking for wmem_default=262144; found wmem_default=262144. Passed
    Checking for wmem_max=262144; found wmem_max=1048576. Passed
    Check complete. The overall result of this check is: Failed <<<<
    Check complete: Failed <<<<
    Problem: The kernel parameters do not meet the minimum requirements (see above).
    Recommendation: Perform operating system specific instructions to update the kernel parameters.
    =======================================================================
    Performing check for GLIBC
    Checking Recommended glibc version
    Expected result: ATLEAST=2.3.2-95.27
    Actual Result: 2.3.4-2.25
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for TotalMemory
    Checking physical memory requirements ...
    Expected result: 922MB
    Actual Result: 16236MB
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for SwapSpace
    Checking available swap space requirements ...
    Expected result: 12177MB
    Actual Result: 16386MB
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for DetectIfDHCPAssignedIP
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for OracleBase
    Validating ORACLE_BASE location (if set) ...
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for OracleHomeSpace
    Checking Oracle Home path for spaces...
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for DetectAnyInvalidASMHome
    Checking for proper system clean-up....
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    Performing check for CompatibilityChecks
    Checking for Oracle Home incompatibilities ....
    Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =======================================================================
    PrereqChecks complete
    .......................................... 100% Done.
    Summary
    Global Settings
    Source: /u01/g/Ora_grid10g/DB_SOFT/database/stage/products.xml
    Oracle Home: /u01/app/oracle/10g/db (ORADB10g_HOME)
    Installation Type: Standard Edition
    Product Languages
    English
    Space Requirements
    / Required 1.36GB (includes 108MB temporary) : Available 34.19GB
    /home/ Required 206KB : Available 34.70GB
    New Installations (105 products)
    Oracle Database 10g 10.2.0.1.0
    Enterprise Edition Options 10.2.0.1.0
    Oracle Spatial 10.2.0.1.0
    Oracle OLAP 10.2.0.1.0
    Oracle Enterprise Manager Console DB 10.2.0.1.0
    Oracle Net Services 10.2.0.1.0
    Oracle Database 10g 10.2.0.1.0
    Oracle Net Listener 10.2.0.1.0
    HAS Files for DB 10.2.0.1.0
    Oracle Internet Directory Client 10.2.0.1.0
    Oracle Call Interface (OCI) 10.2.0.1.0
    Oracle Programmer 10.2.0.1.0
    Oracle interMedia 10.2.0.1.0
    Enterprise Manager Agent Core 10.2.0.1.0
    Oracle JVM 10.2.0.1.0
    Database Configuration and Upgrade Assistants 10.2.0.1.0
    Oracle interMedia Locator 10.2.0.1.0
    Oracle XML Development Kit 10.2.0.1.0
    Oracle Text 10.2.0.1.0
    Oracle Database Utilities 10.2.0.1.0
    Generic Connectivity Common Files 10.2.0.1.0
    Oracle Advanced Security 10.2.0.1.0
    Enterprise Manager Repository Core 10.2.0.1.0
    PL/SQL 10.2.0.1.0
    Oracle Net 10.2.0.1.0
    Assistant Common Files 10.2.0.1.0
    Enterprise Manager plugin Common Files 10.2.0.1.0 Beta
    Buildtools Common Files 10.2.0.1.0
    Installation Common Files 10.2.0.1.0
    Oracle LDAP administration 10.2.0.1.0
    Oracle Java Client 10.2.0.1.0
    Precompiler Common Files 10.2.0.1.0
    Oracle Recovery Manager 10.2.0.1.0
    SQL*Plus 10.2.0.1.0
    iSQL*Plus 10.2.0.1.0
    Enterprise Manager plugin Common Files 10.2.0.1.0
    HAS Common Files 10.2.0.1.0
    Oracle Clusterware RDBMS Files 10.2.0.1.0
    Oracle Wallet Manager 10.2.0.1.0
    Enterprise Manager Minimal Integration 10.2.0.1.0
    Oracle Database User Interface 2.2.13.0.0
    Secure Socket Layer 10.2.0.1.0
    Oracle ODBC Driver 10.2.0.1.0
    Required Support Files 10.2.0.1.0
    Database SQL Scripts 10.2.0.1.0
    OLAP SQL Scripts 10.2.0.1.0
    PL/SQL Embedded Gateway 10.2.0.1.0
    Oracle Globalization Support 10.2.0.1.0
    Character Set Migration Utility 10.2.0.1.0
    LDAP Required Support Files 10.2.0.1.0
    Oracle Help for the Web 1.1.10.0.0
    Oracle JDBC Thin Driver for JDK 1.4 10.2.0.1.0
    Oracle JDBC Thin Driver for JDK 1.2 10.2.0.1.0
    Oracle interMedia Client Option 10.2.0.1.0
    Oracle Notification Service 10.1.0.3.0
    Oracle Code Editor 1.2.1.0.0I
    Perl Interpreter 5.8.3.0.2
    JDBC Common Files 10.2.0.1.0
    Oracle Locale Builder 10.2.0.1.0
    Oracle Containers for Java 10.2.0.1.0
    Database Workspace Manager 10.2.0.1.0
    Oracle Core Required Support Files 10.2.0.1.0
    Platform Required Support Files 10.2.0.1.0
    Oracle interMedia Locator RDBMS Files 10.2.0.1.0
    Oracle JDBC/OCI Instant Client 10.2.0.1.0
    Oracle interMedia Annotator 10.2.0.1.0
    SQLJ Runtime 10.2.0.1.0
    Oracle interMedia Java Advanced Imaging 10.2.0.1.0
    Oracle Database 10g interMedia Files 10.2.0.1.0
    Oracle Data Mining RDBMS Files 10.2.0.1.0
    Enterprise Manager Baseline 10.2.0.1.0
    Oracle Help For Java 4.2.6.1.0
    Oracle UIX 2.1.22.0.0
    XML Parser for Java 10.2.0.1.0
    Precompiler Required Support Files 10.2.0.1.0
    XML Parser for Oracle JVM 10.2.0.1.0
    Oracle Starter Database 10.2.0.1.0
    Sample Schema Data 10.2.0.1.0
    Parser Generator Required Support Files 10.2.0.1.0
    Agent Required Support Files 10.2.0.1.0
    Oracle RAC Required Support Files-HAS 10.2.0.1.0
    RDBMS Required Support Files 10.2.0.1.0
    RDBMS Required Support Files for Instant Client 10.2.0.1.0
    Oracle Label Security 10.2.0.1.0
    XDK Required Support Files 10.2.0.1.0
    Oracle OLAP API 10.2.0.1.0
    DBJAVA Required Support Files 10.2.0.1.0
    SQL*Plus Required Support Files 10.2.0.1.0
    Oracle JFC Extended Windowing Toolkit 4.2.33.0.0
    Oracle Ice Browser 5.2.3.6.0
    Oracle Display Fonts 9.0.2.0.0
    Oracle Extended Windowing Toolkit 3.4.38.0.0
    Enterprise Manager Common Files 10.2.0.1.0
    Enterprise Manager Agent DB 10.2.0.1.0
    Oracle Net Required Support Files 10.2.0.1.0
    Enterprise Manager Repository DB 10.2.0.1.0
    SSL Required Support Files for InstantClient 10.2.0.1.0
    regexp 2.1.9.0.0
    Bali Share 1.1.18.0.0
    Oracle Universal Installer 10.2.0.1.0
    Oracle One-Off Patch Installer 10.2.0.1.0
    Installer SDK Component 10.2.0.1.0
    Java Runtime Environment 1.4.2.8.0
    Sun JDK 1.4.2.0.8
    Sun JDK extensions 10.1.2.0.0
    Installation in progress (Tue Feb 01 15:22:07 IST 2011)
    ............................................................... 11% Done.
    ............................................................... 23% Done.
    ............................................................... 35% Done.
    ............................................................... 47% Done.
    ........................................... 55% Done.
    Install successful
    Linking in progress (Tue Feb 01 15:23:24 IST 2011)
    . 55% Done.
    Link successful
    Setup in progress (Tue Feb 01 15:23:56 IST 2011)
    .................... 100% Done.
    Setup successful
    End of install phases.(Tue Feb 01 15:24:02 IST 2011)
    Starting to execute configuration assistants
    Configuration assistant "Oracle Net Configuration Assistant" succeeded
    Configuration assistant "Oracle Database Configuration Assistant" failedSEVERE:OUI-10104:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them.
    The "/u01/app/oracle/10g/db/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    The "/u01/app/oracle/10g/db/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    WARNING:The following configuration scripts
    /u01/app/oracle/10g/db/root.sh
    need to be executed as root for configuring the system. If you skip the execution of the configuration tools, the configuration will not be complete and the product wont function properly. In order to get the product to function properly, you will be required to execute the scripts and the configuration tools after exiting the OUI.
    The installation of Oracle Database 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
    Please check '/home/oracle/oraInventory/logs/silentInstall2011-02-01_03-21-55PM.log' for more details.

    Hi ,
    Same thing
    Unable to find product oracle.swd.jre[1.4.1, 1.4.1.9.9] in Oracle Inventory
    SEVERE:OUI-10104:Some of the configuration assistants failed. It is strongly rec
    ommended that you retry the configuration assistants at this time. Not successfu
    lly running any "Recommended" assistants means your system will not be correctly
    configured. Select the failed assistants and click the 'Retry' button to retry
    them.
    WARNING:The following configuration scripts
    /u01/app/oracle/10g/db/root.sh
    need to be executed as root for configuring the system. If you skip the executio
    n of the configuration tools, the configuration will not be complete and the pro
    duct wont function properly. In order to get the product to function properly, y
    ou will be required to execute the scripts and the configuration tools after exi
    ting the OUI.
    The installation of Oracle Database 10g was successful, but some optional config
    uration assistants failed, were cancelled or skipped.
    You have new mail in /var/spool/mail/oracle

  • Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

    Hi,
    I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
    Steps done:
    1) DB instance prepared
    2) Created Siebel installation image
    3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
    4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
    5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
    Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
    Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
    Here are the errors I got in the log files sw_cfg_util*.log
    <EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
    GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
    Does anybody know what is the reason?
    Searching in Metalink and Google were fruitless..
    Thank you in advance.

    Just in case anybody bumps in this thread:
    The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
    Applies to:
    +Siebel CRM - Version: 8.1.1 SIA [21111] and later   [Release: V8 and later ]+
    Linux x86
    Symptoms
    Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
    The error on sw_cfg_util_xx.log is as follows,
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
    Reproduce steps:
    - confirm that siebel server was created before, and is stopping.
    - create sh env and enter the following command to remove the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "3 - Remove Existing Configuration".
    - complete the configuration wizard.
    - enter the following command to create the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "1 - Create New Configuration".
    - continue inputs to finish and execute the configration.
    +==> you'll find "Execution Failed".+
    Cause
    AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
    Solution
    You can do either of follows,
    +(1) Uninstall and Install the Siebel Server again.+
    +(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
    +[Step]+
    Name = AddSrvrRegistryEntry
    Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
    So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
    Edited by: mmango on Jan 31, 2012 12:21 AM

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

    I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
    the error message got when it runs on another controller is "Error -32810 occurred at  The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
    I wonder by what it is caused?
    Thanks

    Hi Matthew,
    As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
    I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
    Please keep us posted on your troubleshooting steps. Have a great day!
    Amanda Howard
    Americas Services and Support Recruiting Manager
    National Instruments

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

    I am able to run the report fine in BIDS in the preview window, and it deployes fine.  When it goes to view the report in the browser, I get the following error.  There is no domain, I am using a standalone computer with SQL Server and SSRS on
    this one machine.
    Can anyone point to where I might configure the permission it is looking for?  thanks!  Steven
    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect
    Steven DeSalvo

    Hi StevenDE2012,
    Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
    Configuration is not correct.
    Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
    a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
    to other computers. To configure the account, please refer to the following steps:
    Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
    On the Execution Account page, select Specify an execution account.
    Type the account and password, retype the password, and then click Apply.
    In addition, please verify you have access to the Report Server database by following steps:
    Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
    Go to Database, Verify that you can connect to the database.
    Make sure you are granted public and RSExecRole roles.
    Reference:
    Configure the Unattended Execution Account
    Configure a Report Server Database Connection
    If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • Configure Database is getting failed under Reporting and analysis in 11.1.2.3

    Hi,
    When I am trying to configure the database under Reporting and Analysis its getting failed and when I check the configtool.log it says
    [2014-10-16T05:33:37.446-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01107] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Running file: C:\Oracle\Middleware\EPMSystem11R1\products\biplus\database\Common\postInit.sql
    [2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONTAINER SET CREATION_DATE = null, LAST_MODIFIED_DATE = null where CREATION_DATE is null
    [2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONTAINER SET CREATION_DATE = null, LAST_MODIFIED_DATE = null where CREATION_DATE is null
    [2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONT_VERSION set CREATION_DATE = null WHERE CREATION_DATE is null
    [2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONT_VERSION set CREATION_DATE = null WHERE CREATION_DATE is null
    [2014-10-16T05:33:37.477-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONT_VERSION set LAST_MODIFIED_DATE = null WHERE LAST_MODIFIED_DATE is null
    [2014-10-16T05:33:37.477-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONT_VERSION set LAST_MODIFIED_DATE = null WHERE LAST_MODIFIED_DATE is null
    [2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01104] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] postInit.sql Processed (3) Success (3) Errors (0)
    [2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07558] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponent(com.hyperion.hit.registry.ComponentType)("RA_FRAMEWORK")
    [2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponent(com.hyperion.hit.registry.ComponentType)("64711b2385581a47S60706d4c148f4212621S7cb4") : Returned RA_FRAMEWORK
    [2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getChildren(com.hyperion.hit.registry.Component,com.hyperion.hit.registry.ComponentType)("RA_FRAMEWORK/64711b2385581a47S60706d4c148f4212621S7cb4,DATABASE_CONN") : Returned 1
    [2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] trace: This is not datasource db component.  Doing clean up now.
    [2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01110] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] remove old link only
    [2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: Removing link from RA_FRAMEWORK ( 64711b2385581a47S60706d4c148f4212621S7cb4 ) to DATABASE_CONN (64711b2385581a47S615148421490d7dbbddS77a8)
    [2014-10-16T05:33:37.508-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01112] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Create new database component and link it
    [2014-10-16T05:33:37.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: Storage.getComponents(com.hyperion.hit.registry.ComponentType)(DATABASE_CONN)
    [2014-10-16T05:33:37.508-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponents(com.hyperion.hit.registry.ComponentType)("DATABASE_CONN") : Returned 10 component(s)
    [2014-10-16T05:33:37.571-04:00] [EPMCFG] [TRACE] [EPMCFG-05955] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Setting link. Parent: id [RA_FRAMEWORK/64711b2385581a47S60706d4c148f4212621S7cb4], componnet type [RA_FRAMEWORK]. Child: id [customURL:HRA/64711b2385581a47S615148421490d7dbbddS77a8], component type [DATABASE_CONN]
    [2014-10-16T05:33:37.602-04:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
    com.hyperion.cis.config.ProcessingException: Failed to configure HPSU component: {0}, {1}
    at com.oracle.reportinganalysis.config.RADBConfigurator.configure(RADBConfigurator.java:57)
    at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:650)
    at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:296)
    at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
    at java.lang.Thread.run(Thread.java:662)
    All the required tables got created the Schema(SchemaName: HRA) but still the database configuration is getting failed.
    All Other hyperion products got successfully configured.
    Regards,
    VJ.

    Hi Nowshad,
    Thanks for your reply.
    I have did that couple of time but still getting the same above message.  I have also followed the below document from metalink  but still no luck.
    Reporting And Analysis Configuration with New Database Fails (Doc ID 1482499.1)
    I am not sure what I am missing.
    Regards,
    Vijaya Krishna.

  • SOLMAN_SETUP/ preparation phase 5.1 configure web dispatcher config failed.

    Hello
    Based on SAP Solution manager 7.1. SPS 11 Fresh install, SOLMAN_SETUP/ preparation phase 5.1 configure web dispatcher config failed.
    Error message:
    L3 - Failed to reach test WS through System Settings (ICM/HTTPURLLOC):
    http://vip.myfqdn.fr:80
    L2 - Test WS can be reached through ICM:
    http://hostname.myfqdn.fr:8000
    SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
    Solman is located in a DMZ, http/https are configurated in table
    HTTPURLOC and load balancer  is used to publish http and https url and port redirection
    instead of native url « hostname » + default port (80xx / 443xx)
    • In DMZ for url
    http://hostname.myfqdn.fr:8000/ManagedSetupWS/Config1?style=document
    system answer is OK
    • In LAN via Load balancer url return KO message
    http://vip.myfqdn.fr:8000/ManagedSetupWS/Config1?style=document
    Any help will be appreciate.
    Regards
    Eric

    Hi All,
    I have resolved the issue with re-setting the password of SM_INTERN_WS & SM_EXTERN_WS.
    from step 1.
    with no-dispatcher configuration..
    Regrads,
    Gagandeep Singh

  • Configure Windows Server Essentials Fails with Please Click Retry. If the Issue still exsists........

    I had a Windows 2003 SBS that i am migrating to a new Windows 2012 R2 Essentials machine.  I had to upgrade the Domain and Forrest from 2000 to 2003 to be able to add my new 2012 server to the existing domain.  Once it was replicated i demoted
    the Server 2003 machine and removed the DNS role as well.  I then upgraded the Forrest and Domain to 2008 R2 and then to 2012 R2.
    Now the fun begins.  I tried to then run the Essentials configuration wizard and it fails.  I have spent two days reading technotes so here is what i have done.  For some reasone the Managed Service Accounts container was not there.  (i
    may deleted it during the AD clean up..there were a ton of unneeded containers and OUs).  So i followed:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/f9588fd5-0236-419d-b217-8c4de67732ae/deleted-managed-service-accounts-container?forum=winserverDS
    Which i used ADSIEdit to remove some containers and set the AD Version to clear and rerean ADPrep /domainprep.  At this point the Managed Service Accounts container reapeared.  I removed the role of Windows Essentials Experience...rebooted and
    installed the role again.  But the ServerAdmain and MediaAdmin$ accounts did not create.   So i created them using the following powershell:
    import-module activedirectory
    add-kdsrootkey -effectivetime ((get-date).addhours(-10))
    New-AdServiceAccount -Name ServerAdmin -Path "CN=Managed Server Accounts,DC=[Domain],DC=local" -enabled $true -RestricttoSingleComputer
    and i did the same for MediaServer.  And they show up in the container where they should be.  I then went to GPO Managment and change the Log on as Service and added the two accounts to the Domain Controller GPO.  (*note...interesting thing
    here...before i create the domain managed service accounts i tried [domain]\ServerAdmin$ and if failed but when i tried ServerAdmin$ it added but it was not the domain account....so that was odd) .  I then did a gpupdate /force as well as a reboot for
    good measusre.  When the Server came back up, i went the Local Policies and verified that the ServerAdmin$ and MediaAdmin$ were given Log in as Service on the Server.  Finally i ran the COnfigure Essentials Wizard and the DAMN thing failed again.....can
    anyone please help me with this.  It is in a production environment due to the 2003 Server dying...so i can't just wipe it and start from scratch.
    Thanks!!

    Hi,
    Glad to hear that you have solved this issue and thanks for sharing in the forum. Your time and efforts are highly appreciated.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Configuring retry count for failed recon events

    Has anyone managed to configure retry count for failed reconciliation events in OIM? By default OIM re-tries five (5) times before giving up the event. In most cases this is highly optimistic.
    In OC4J I tried changing oc4j.jms.listenerAttempts property for JMS server, it didn't have any effect?
    BR, Juha

    801603 wrote:
    I am confused about how to configuring OEM GC to utilize auditing and may not be asking the proper question. For example, if I wish to monitor failed login counts and create an alert to notify me, must I turn on auditing in the database first? I guess what I am asking is based on the tem,plates provided. Is it merely enough to enter values for the various events or must I do something further to turn them on? I realize the question is vague but that is a function of my understanding.
    Thanks.Yes.. you are right .. You need to enable that metric by setting threshold(You can do it through template or manual) and then configure notification rule for the same.
    Check out below DOC :
    http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b25986/rac_database.htm#sthref326
    http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e14586/notification.htm#BABJFFCJ
    Regards
    Rajesh

  • SAP Router configuration on Linux platform (error in start script)

    Hello gurus,
    I´m trying to setup the saprouter on Fedora v14 (32 bits).
    I did all the configure with root user. The problem is when I run the script that starts the saprouter service, it show me the following error:
    [root@saprouter sap]# pwd
    /usr/sap/saprouter
    [root@saprouter saprouter]# saprouter_start
    /usr/sap/saprouter/saprouter_start: line 12: syntax error near unexpected token `|'
    'usr/sap/saprouter/saprouter_start: line 12: `        | tee -a $LOGFILE &
    The content of this script, has the following sintaxes:
    # Start saprouter
    # You can automatically start SAProuter when you start the system. In UNIX for example, you would change file /etc/rc.
    # saprouter CN=saprouter, OU=0001214237, OU=SAProuter, O=SAP, C=DE sapserv2
    SRDIR=/usr/sap/saprouter
    LOGFILE="usr/sap/saprouter/saprouter_log"
    if [ -f $SRDIR/saprouter ] ; then
            echo "Starting SAP Router" | tee -a $LOGFILE
    $SRDIR/saprouter -r -R $SRDIR/saprouttab -G $LOGFILE -W 60000 -K "p:CN=saprouter, OU=0001214237, OU=SAProuter, O=SAP, C=DE"
            | tee -a $LOGFILE &
    fi
    The strange of this is I already did this type of configuration on Linux with the same scripts... but in red hat enterprise linux x86_64 and in there it works perfectly!
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/4f/992ce8446d11d189700000e8322d00/frameset.htm
    Can you help me please in way to solve this problem...?!
    Best regards,
    João Dimas - Portugal

    Hello Clebio,
    First al all, please don´t forget to read my previous message.
    I´m writing again because I made other tests that I would like to show you...!
    1- In my previous message I mentioned an error when I ran directly the command # saprouter -r... and as you recomend, I typed the "ldd saprouter", the output of this show that libstdc+.so.5: was not found! I already solve this issue, I installed the compat-libstdc+ with # yum install compat-libstdc++. So... now when I run that "ldd saprouter" the result is:
    [root@saprouter saprouter]# ldd saprouter
         linux-gate.so.1 =>  (0x003a9000)
         libdl.so.2 => /lib/libdl.so.2 (0x00911000)
         librt.so.1 => /lib/librt.so.1 (0x00918000)
         libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x00110000)
         libm.so.6 => /lib/libm.so.6 (0x00923000)
         libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00966000)
         libpthread.so.0 => /lib/libpthread.so.0 (0x008f4000)
         libc.so.6 => /lib/libc.so.6 (0x00768000)
         /lib/ld-linux.so.2 (0x00747000)
    It seems that is solved! Is not it?
    2- After that correction, I ran again the # saprouter -r but now it show me the following error:
    [root@saprouter saprouter]# saprouter -r
    trcfile  dev_rout
    no logging active
    *** ERROR => invalid lines in './saprouttab', see 'dev_rout' [nirout.cpp   8006]
    ... next, what I did was, I opened the dev_rout:
    trc file: "dev_rout", trc level: 1, release: "700"
    Thu Aug 11 13:10:49 2011
    SAP Network Interface Router, Version 38.10
    command line arg 0:     saprouter
    command line arg 1:     -r
    main: pid = 9808, ppid = 2038, port = 3299, parent port = 0 (0 = parent is not a saprouter)
    reading routtab: './saprouttab'
    *** ERROR => SNC field without SNC active, skip line 2 [nirout.cpp   7775]
    *** ERROR => SNC field without SNC active, skip line 3 [nirout.cpp   7775]
    *** ERROR => SNC field without SNC active, skip line 8 [nirout.cpp   7775]
    ... and I also checked my saprouttab in there I see...:
    1. vim saprouttab
    # SNC connection to and from SAP
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
    KT "p:CN=saprouter, OU=000121987, OU=SAProuter, O=SAP, C=DE" 81.193.132.663 3299
    # SNC connection to local system for R/3-Support
    # R/3 Server: 192.168.34.178
    # R/3 Instance: 00
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.34.178 3200
    # Access from the local Network to SAP
    P * 194.39.131.34 3299
    # Deny all other connections
    #D * * *
    What´s the problem!??! I don´t get it!! My God... I don´t understand, all the entries in saprouttab seems well to me! Can you verify this please?! It´s correct, isn´t it?
    Can you help me!?
    Thank you
    João Dimas - Portugal

  • SNC router configuration on linux

    Hi All,
    If anyone having the document for SNC router configuration on linux, pl share.
    Regards,
    Joe

    Hi,
    check sap  Note 30289 - SAProuter documentation
    look at attached document to note.
    further mail me for other documentation .
    check my business card for mail address.
    regards,
    kaushal

  • "one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting"

    HI,
    when I configure AD RMS configuration it gives me error that "one or more  ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting". The user which I try to install is an administrator of DC and
    also the service account is a member of enterprise domain group. When I tried this on test environment it works perfectly but on production environment it didn't. pls help me with this....
    Thanks......
    I am using windows 2012 standard Server.. 

    HI Eddie,
    Thanks for reply.. Pls find the debug log below... It says " Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName'
    - The actual length is less than the MinLength value. "
    00000706 56.78187180
    [11964] CallStack:Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting
    00000707 56.78187180
    [11964] System.Xml.Schema.XmlSchemaValidationException
    00000708 56.78187180
    [11964]         Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName' -
    The actual length is less than the MinLength value.
    00000709 56.78187180
    [11964]         StackTrace:    at Microsoft.RightsManagementServices.Configuration.HelperMethods.ProvisionSchemaValidationEventHandler(Object sender, ValidationEventArgs e)
    00000710 56.78187180
    [11964]    at System.Xml.Schema.XmlSchemaValidator.CheckElementValue(String stringValue)
    00000711 56.78187180
    [11964]    at System.Xml.Schema.XmlSchemaValidator.ValidateAtomicValue(String stringValue, XmlSchemaSimpleType& memberType)
    00000712 56.78187180
    [11964]    at System.Xml.Schema.XmlSchemaValidator.InternalValidateEndElement(XmlSchemaInfo schemaInfo, Object typedValue)
    00000713 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateElement()
    00000714 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
    00000715 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateElement()
    00000716 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
    00000717 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateElement()
    00000718 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
    00000719 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateElement()
    00000720 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
    00000721 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateElement()
    00000722 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
    00000723 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
    00000724 56.78187180
    [11964]    at System.Xml.DocumentSchemaValidator.Validate(XmlNode nodeToValidate)
    00000725 56.78187180
    [11964]    at System.Xml.XmlDocument.Validate(ValidationEventHandler validationEventHandler, XmlNode nodeToValidate)
    00000726 56.78187180
    [11964]    at Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting(ConfigOperationType configOperation)
    00000727 56.78187180
    [11964]  
    00000728 56.78199768
    [11964] -Microsoft.RightsManagementServices.Configuration.Commands.InstallADRMS.ProcessRecord
    00000729 56.84855270
    [11964] +Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
    00000730 56.84864807
    [11964] -Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
    00000731 56.86203766
    [23784] +[Tier2Diagnostic]  
    00000732 56.86203766
    [23784] CallStack:System.Windows.Threading.ExceptionWrapper.InternalRealCall
    00000733 56.86203766
    [23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
    00000734 56.86203766
    [23784]         Message: AD RMS setup failed because of invalid configuration settings.
    00000735 56.86203766
    [23784]         StackTrace:    at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
    EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
    00000736 56.86203766
    [23784]    at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
    warningHandler, EventHandler`1 errorHandler)
    00000737 56.86203766
    [23784]    at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
    00000738 56.86203766
    [23784]    at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
    00000739 56.86203766
    [23784]    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    00000740 56.86203766
    [23784]   + System.Management.Automation.RemoteException
    00000741 56.86203766
    [23784]   +         Message: AD RMS setup failed because of invalid configuration settings.
    00000742 56.86203766
    [23784]   +         StackTrace:  
    00000743 56.86203766
    [23784]  
    00000744 56.86225891
    [23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
    00000745 56.86225891
    [23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
    00000746 56.86225891
    [23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
    00000747 56.86225891
    [23784]         Message: AD RMS setup failed because of invalid configuration settings.
    00000748 56.86225891
    [23784]         StackTrace:    at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
    EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
    00000749 56.86225891
    [23784]    at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
    warningHandler, EventHandler`1 errorHandler)
    00000750 56.86225891
    [23784]    at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
    00000751 56.86225891
    [23784]    at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
    00000752 56.86225891
    [23784]    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    00000753 56.86225891
    [23784]   + System.Management.Automation.RemoteException
    00000754 56.86225891
    [23784]   +         Message: AD RMS setup failed because of invalid configuration settings.
    00000755 56.86225891
    [23784]   +         StackTrace:  
    00000756 56.86225891
    [23784]  
    00000757 56.86357880
    [23784] PageLeave: Progress
    00000758 56.86389160
    [23784] ErrorNotification: <null>
    00000759 56.86653519
    [23784] PageEnter: Results
    00000760 56.89128876
    [23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
    00000761 56.89128876
    [23784] CallStack:Microsoft.RightsManagementServices.Deployment.ViewModel.ResultsPageViewModel.SetUpResultDetails
    00000762 56.89128876
    [23784] System.Management.Automation.ApplicationFailedException
    00000763 56.89128876
    [23784]         Message: One or more AD RMS role services could not be configured:
    00000764 56.89128876
    [23784]         StackTrace:  
    00000765 56.89128876
    [23784]   + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
    00000766 56.89128876
    [23784]   +         Message: AD RMS setup failed because of invalid configuration settings.
    00000767 56.89128876
    [23784]   +         StackTrace:    at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
    EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
    00000768 56.89128876
    [23784]    at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
    warningHandler, EventHandler`1 errorHandler)
    00000769 56.89128876
    [23784]    at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
    00000770 56.89128876
    [23784]    at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
    00000771 56.89128876
    [23784]    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    00000772 56.89128876
    [23784]       + System.Management.Automation.RemoteException
    00000773 56.89128876
    [23784]       +         Message: AD RMS setup failed because of invalid configuration settings.
    00000774 56.89128876
    [23784]       +         StackTrace:  
    00000775 56.89128876
    [23784]  
    00000776 56.89152908
    [23784] +[Tier2Diagnostic] OnOperationError
    00000777 56.89152908
    [23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
    00000778 56.89152908
    [23784] System.Management.Automation.ApplicationFailedException
    00000779 56.89152908
    [23784]         Message: One or more AD RMS role services could not be configured:
    00000780 56.89152908
    [23784]         StackTrace:  
    00000781 56.89152908
    [23784]   + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
    00000782 56.89152908
    [23784]   +         Message: AD RMS setup failed because of invalid configuration settings.
    00000783 56.89152908
    [23784]   +         StackTrace:    at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
    EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
    00000784 56.89152908
    [23784]    at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
    warningHandler, EventHandler`1 errorHandler)
    00000785 56.89152908
    [23784]    at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
    00000786 56.89152908
    [23784]    at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
    00000787 56.89152908
    [23784]    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    00000788 56.89152908
    [23784]       + System.Management.Automation.RemoteException
    00000789 56.89152908
    [23784]       +         Message: AD RMS setup failed because of invalid configuration settings.
    00000790 56.89152908
    [23784]       +         StackTrace:  
    00000791 56.89152908
    [23784]  

  • Error: Failed dependencies: during  ASMLib Configuration: on linux 4

    Hi,
    [root@test asm]# lsb_release -a
    LSB Version: :core-3.0-ia32:core-3.0-noarch:graphics-3.0-ia32:graphics-3.0-noarch
    Distributor ID: RedHatEnterpriseAS
    Description: Red Hat Enterprise Linux AS release 4 (Nahant Update 5)
    Release: 4
    Codename: NahantUpdate5
    [root@test asm]# uname -r
    2.6.9-55.ELsmp
    i have downloaded the from oracle site
    Drivers for kernel 2.6.9-55.EL
    oracleasm-2.6.9-55.ELxenU-2.0.3-1.i686.rpm
    oracleasm-2.6.9-55.ELsmp-2.0.3-1.i686.rpm
    oracleasm-2.6.9-55.ELhugemem-2.0.3-1.i686.rpm
    oracleasm-2.6.9-55.EL-2.0.3-1.i686.rpm
    but getting the below error
    [root@test asm]# rpm -Uvh \
    oracleasm-2.6.9-55.ELxenU-2.0.3-1.i686.rpm \
    oracleasm-2.6.9-55.EL-2.0.3-1.i686.rpm \
    oracleasm-2.6.9-55.ELhugemem-2.0.3-1.i686.rpm \
    oracleasm-2.6.9-55.ELsmp-2.0.3-1.i686.rpmerror: Failed dependencies:
    kernel-xenU = 2.6.9-55.EL is needed by oracleasm-2.6.9-55.ELxenU-2.0.3-1.i686
    oracleasm-support >= 2.0.0 is needed by oracleasm-2.6.9-55.ELxenU-2.0.3-1.i686
    oracleasm-support >= 2.0.0 is needed by oracleasm-2.6.9-55.EL-2.0.3-1.i686
    kernel-hugemem = 2.6.9-55.EL is needed by oracleasm-2.6.9-55.ELhugemem-2.0.3-1.i686
    oracleasm-support >= 2.0.0 is needed by oracleasm-2.6.9-55.ELhugemem-2.0.3-1.i686
    oracleasm-support >= 2.0.0 is needed by oracleasm-2.6.9-55.ELsmp-2.0.3-1.i686
    Suggested resolutions:
    kernel-hugemem-2.6.9-55.EL.i686.rpm
    kernel-xenU-2.6.9-55.EL.i686.rpm
    appreciacted for the inputs
    Thanks

    Hi,
    Try it :
    {message:id=10084654}

Maybe you are looking for

  • Using Apple TV abroad

    Moving to Spain from USA. My apple ID is from the States. Will I be able to access content from the US with Apple TV once I'm over there?

  • More BoxLayout alignment issues

    Hi everybody, I'm trying to create a bar graph with BoxLayout, but I'm having a problem. The BoxLayout always orients the buttons in a line on the exact center of the panel, which can result in a lot of extra space. I'd like to have the line be off-c

  • GR slip printting issue in TC migo.

    Hi All, i'm trying to setup printer, i have done all setting but still i'm unable to get the GR Reciepts printout in MIGO. any body can help me please. khan

  • Hw to create dialogue box in jsf

    hii guys... i want ot create a dialogue box in jsf.. when a button is pressed a dialogue box is to be appeared.. it can be done with the java script but i have to do it in jsf... can any one help me?... thanx... jasar Message was edited by: jasar

  • MySQL: Result characters are all spaces!!!?

    The field names and contents in Table are all English. Can connect to DB, the result row number is right also, but when using getString("name"), the following exception occur: SQLException: Column 'name' not found. getString(1) can work, but the resu