WebRequest.Create Hangs in Client system with Windows 8.1 with Fmrk 4.5

Hi,
We are hosting a Windows Form in IE builded with .Net Target Framework 3.5 and running in ASP.Net website's run time .Net Framework 2.0.
Till now, this is working in Windows 7 and IE11 combination. When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
When we debugged the code, we found that hanging happens at
1. To insert a image 
WebRequest request = WebRequest.Create(url);
2. While doing webservice call
CSpellCheckerWS objCUserDictionaryWordsWS = new CSpellCheckerWS();
Please find below our Trails for workaround:
1. We have try catch block on top of above lines, but it never comes to catch or proceed (checked for more than 30 minutes), its keep on running that makes IE to hang. End user have to kill the IE to proceed with our web application.
2. We have timeout option for WebRequest object, but we are having problem in the constructor itself, so unable to make use of timeout option.
3. We planned to use HttpClient object, but for this we need to build our Windows Form with Target Framework .Net 4.5. But .Net framework 4.5 will no longer support to host the Windows Form in IE.
4. We observed that, for our Windows Form project dll, say abcd.dll, we have ref link to abcd.config.xml
in the ASP.Net hosted web page. If we remove the *.config.xml, then we do not have this hanging issue. So, our problem solves here. But we faced another problem. Now we are getting
404 errors for all the dependent child dll for our main dll, abcd.dll. Even though we have child dlls in the same folder of abcd.dll, it is checking in website root folder, bin folder , .exe, .dll and finally after 8 iterations, it is picking
the correct dll. So for multiple child dlls we are getting 9 * no. of child dlls = 404 errors. So, we are unable to proceed further.
200 http://localhost/BrowserWebSite.CSharp/Default.aspx
200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
200 http://localhost/BrowserWebSite.CSharp/BrowserApplication.config.xml
200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.DLL
404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.DLL
404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.DLL
404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.DLL
404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.EXE
404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.EXE
404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.EXE
404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.EXE
200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserChildApplication.DLL
So, please guide us how to proceed further. What is the relation between the *.config.xml and WebRequest.Create constructor and 404 errors.
We have simple test application to replicate the issue. If needed, I can share the application.
System Requirements to replicate : Windows 8.1, IE 11 and (Client system having .Net 4.5) and Windows / Web projects builded with .Net 3.5/2.0 respectively.
Note : We have run caspol settings and set EnableIEHosting to 1 (DWord).

Hello,
>>When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
What .NET Framework version are you using after you migrate your client to windows 8 and IE11? If it is 4.0 or 4.5, I am afraid this is by designed because hosting controls in IE is now blocked by default (as of v4 or v4.5). See MSDN article under
'Web Applications'.
You could still enable it by modifying its provided registry key.
By the way, since this issue is related with IE and web application, I suggest that you could post such kind of issues to related forum, as
IE forum and Web forum.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Creating a new DEV system with the QAS configuration

    Hi there,
    We're planning to have a contingency server and then, a new server has been bought and will be a new DEV system.
    We would like to have a copy of our QAS system (but only configuration) so that we can create the DEV system.
    What could be a good plan for that?!
    I thought exporting the QAS client and after restoring the backup of DEV system into the new server, importing the QAS client.
    Is there any other idea?!
    Thanks so much in advance,
    Dany Anderson

    Hello
    You can install the new system refresh with Dev data and import the custom settings of QAS.
    I hope already whatever is in QAS should be also in DEV in fact more than QAS data.
    Regards
    Vivek

  • IPhoto hangs & takes whole system with it...

    This has just started recently & is driving me nuts.
    When I try to transfer images into iPhoto it hangs part way through.
    About the only thing I can do is move the cursor, everything else is totally frozen.
    Can't even get optioncommandescape to come up & quit out of iPhoto.
    The only way to fix it is to hard-shut the system (holding power button down).
    If I import the same images through Image Capture there are no problems until I then try to import them into iPhoto. Again it hangs.
    If I split the images saved by Image Capture into a folder of jpgs & one of cr2s (raw's) and then import these folders separately into iPhoto that works.
    I thought it may be a faulty card so I tried another that didn't help.
    I thought it may be a faulty USB lead so I tried a firewire card reader. That didn't help.
    Sooooo... if the images aren't corrupt, the card is fine, the transfer devices are functional... what is going on with iPhoto?
    By-the-by camera is EOS 1DMkIII using 8g CF card. Have had no problems of this sort until around 3 weeks ago.

    Since iPhoto creates a jpg for each RAW file imported shooting both RAW and jpg and importing both is redundant and will take up additional hard drive space. Have you considered just shooting RAW?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Create image server operating system with Hyper-V and virtual machines

    Friends,
    Need to replicate the environment they currently have, but wanted to optimize this operation by creating an image of windows server with Hyper-V and virtual servers already installed, what tool do I use? Can someone guide ???
    Dreyher

    I recommend you separate the task of protecting the host from the task of protecting the guest VMs. 
    By "replicate the environment", do you mean backup the VMs in a recoverable state? or do you intend on migrating the VMs to another environment like another physical location? How much down time can you tolerate if any?
    To backup the VMs use a VSS based backup solution. There's plenty out there, including Windows Server backup, Altaro, DPM, Veeam, and many more. This does not require installing agent on any of the VMs, and will not down the VMs during backup. Here's an
    example Powershell script to backup all VMs on the local host:
    Install-WindowsFeature -Name Windows-Server-Backup
    $BackupTarget = "\\server\share"
    $WbTarget = New-WBBackupTarget -NetworkPath $BackupTarget
    $WBPolicy = New-WBPolicy
    Add-WBBackupTarget -Policy $WBPolicy -Target $WbTarget
    Add-WBVirtualMachine -Policy $WBPolicy -VirtualMachine (Get-WBVirtualMachine) # Add all VMs on localhost
    Start-WBBackup -Policy $WBPolicy -Async
    If the intent is VM migration from one location to another, there are plenty of tools to do so with minimal or no down time. Just bing it..
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

  • CUA - SUIM in client system with background processing of IDOCS

    Hi
    We have setup CUA in our Solution Manager system 4.0 sr2 SP11 and activated background processing of idocs.  When we run SUIM in the child system the user creation/change information is now showing the name of the background user rather than the actual name of the creator/modifier.  
    Has anyone else seen this before and is it standard functionality or a bug?
    Thanks in advance
    Justin

    Hi Djamel
    When you set up CUA you do the inital import of the roles with SCUG, ensure you have the company details correct in each system.  Also in each system schedule the background job SUSR_ZBV_GET_RECEIVER_PROFILES, this will get the details of any new roles/profiles setup in the child systems.
    Regards
    Justin

  • Purchase Order created from different client machine with same login ID

    Hi,
    Purchase Order created from different machine using same Login ID. How to trace IP address of that Machines.
    Thanks
    Hemanth

    Hi;
    Please review:
    Re: sql to get Machine IP
    Regard
    Helios

  • How to create user in Client 001 in ABAP TRIAL version?

    Hi, I downloaded SAP BI ABAP trial version and installed on windows server 2003. I am not able to create new user in client 001 where I can create Infocubes.
    I followed below this link
    http://wiki.sdn.sap.com/wiki/display/BI/SettingUpBIinNetweaver7.0ABAPTrialversion
    I logged in client 000 using BCUSER. I used txn SE16 . Entered RSADMINA and BWMANDT was already 1. I created a new user here and gave SAP_ALL and SAP_NEW authorizations.
    Now using this new user when I try to login into client 001 then I get invalid login but when I try to login in client 000 then I can login fine.
    Is there anything which is missing from the note or I am doing something wrong?
    Any help would be appreciated.
    Thanks

    Thanks Sven, I forgot my old post about the same issue.
    The material is wrong. When software is installed then it is fine for client 000. In order to login and work in client 001 just login with user DDIC and password minisap in client 001 and create user BCUSER with SAP_ALL and SAP_NEW profiles. Once this user is created login into client 001 with this user. Once you try to do something then it will ask to create logical system. Follow this material in creating logical system from there.
    Thanks,

  • SAP EP online client system

    Hi All,
    Are there any websites which provide free enterprise portal client system with credentials like consolut for SAP logon pad.
    Please provide supported links for installation of the same.
    Thanks & regards,
    vanaja.

    Hi Suvatchai,
    Just a note which is alittle off track from your question. Normally, the Portal takes the UME datasource from either LDAP or one of your backend system (where your CUA is).
    For my case, I have my UME datasource as LDAP and one of the main reason being that there are management users who will use the Portal but does not exist in SAP backend systems or uses very limited SAP access. Secondly, if you want to do mass maintenance on users or groups, LDAP offer the possibilities (here I mean maintianing mass users to a group/s or users updates). Thus, LDAP became our CUA. Of course, its all up to you and who your target audience are 
    As for your Q1, GLM has already identified where you can find the UME and you can config it to point to the backend system. I'm not sure if you can have 2 UME datasource setup but I believe that you can't (maybe someone can confirm this out for you). This is also another reason for LDAP or the backend system as your CUA. You can connect multiple Portals UME datasource to a LDAP or a SAP backend CUA (thus users are created centrally and are replicated to the Portals).
    Hope that helps.
    Ray

  • Problem in create message from satelite system

    Hello! I have SAp Solution Manager 4.0 stack 15
    I have configurate trusted connections between my solman system and satekite system. I successfully generate iBase, create business partners. When I create message from my sap user , message created without problem. But when I create message from the test user, system create message with error:
    Message 8000000339 created in Support Desk System with following error: User SDTEST does not exist
    Message no. BCOS002

    There is a check if the user who creates the message in the satellite system does exist in Solution Manager.
    Try TX: DNO_CUST04 -> NO_USER_CHECK = X
    /cheers

  • Spanned file system with zip

    Hi
    Is there a way of creating a spanned file system with any of the current zip utilities (Native LabView or OpenG etc.)?
    Effectively the result should be z01, z02, etc. This format is something that both WinRAR and WinZIP accomplish, so the output would have to be compatible.
    The main issue is when compressing a whole directory. Files are rearranged in such a way that the output of all z01, z02 etc. is of the same size (users choice), and I don't quite know how the files are re-arranged in order to achieve that.
    Thanks  

    OpenG ZIP does not support spanning or stripped datafiles. The
    zerotolerance wrote:
    First, thanks for your reply.
    I actually have a zip utility that compresses strings rather than files. I believe that this utility can be used to create this spanning, but the trouble is it only gives the actual compressed body and not the required headers. 
    I don't know much about how the headers and how to create them (i.e. the crc32, relative path etc.) in a zip file.
    Most likely you just have the deflate algorrtihme in that "ZIP" utility. It is the compression algorithme normally used in ZIP but has nothing to do with ZIP itself. ZLIB is the most commonly used Open Source library for the deflate() algorithme and is also used in the OpenG ZIP library to implement the ZIP functionality. The function ZLIB Deflate.vi in OpenG ZIP exposes this functionality directly and does mthe same.
    zerotolerance wrote:
    First, thanks for your reply.
    But more importantly, how are the files within a directory arranged so that constant zip files (i.e. z01, z02 etc.) come out. 
    What I mean by this is the convept that WinRAR uses. So, if you have a directory with mixed file sizes in them, and you choose to have split size of 10MB, the output of each compressed file (i.e. z01, z02 etc.) is always 10MB, appart from the last one of course. 
    Some help in the headers and the rearrangement of files within a nested direcotry would go a long way.
    As for the cmd line, I don't like using that feature with labview because its very heavily limited. It does not give any intermitante control when a job is started. Just to see a simple progress as exe runs we have to jump through hoops, i.e. writting the output to file or clipborad and then reading etc. let alone anything else. and I'm also looking to add alot of other small features along the way, i.e. pausing, cancel, resume progress save, etc. So I definatly cannot take this route.
    So ZIP uses deflate() to compress the individucal file streams but the ZIP format is about creating management around it that allows to store multiple such streams into one physical file. It is a little like a filesystem inside a file.
    Adding Spanning and striping to OpenG ZIP would be possible and most of it could be done in the LabVIEW part of it, but there would also need to be some modifications to the underlaying shared library to support that. The spanning or striping is done in such a way that filestreams are cut up when necessary and continued in the next data file. The unzipping algorithme has then to be smart enough to recognize that and combine the streams again when uncompressing. For that the compression changes various flags in the header for each stream, which is the part where the shared library would need to be modified to allow those changed values to be writting (and also recognized on decompression). All in all quite a serious project undertaking.
    Refusing to use command line tools because they are ugly is not really a smart decision.
    Under Unix/Linux it is totally normal to do so and it makes the whole unix system very powerful as you don't need to write huge monotlithic monsters that do everything from making coffee, to cleaning the house and making the laundry but simply make a tool for each task and tie them together through command line chaining. Divide and master is the magic here, not not conquer and swallow!
    Also you have here the choice to use a command line tool and be done in 5 minutes, or write a tool like OpenG ZIP that took me probably several man months of work over time. Or wait until me or someone else changes OpenG to support this feature which could be 10 years.
    Alternatively you can also try to write a LabVIEW library to use the ZIPArchive shared library from http://www.artpol-software.com/ziparchive/KB/0610051553.aspx. But that is likely going to be a similar effort as writing OpenG ZIP was.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • What Kind of microcontr​oller is needed for alarm system with PIR sensors

    Hi ! I'm student at Technical University Varna , 
    Bulgaria . I'm interessted to create my own alarm system with Labview,
    but I'm not sure what kind of controller i need and what kind of PIR
    sensors.                  Thank You

    This is duplicate post:
    What Kind of microcontroller is needed for alarm system with PIR sensors

  • What Kind of microcontroller is needed for alarm system with PIR sensors

    Hi ! I'm student at Technical University Varna , 
    Bulgaria . I'm interessted to create my own alarm system with Labview,
    but I'm not sure what kind of controller i need and what kind of PIR
    sensors.                  Thank You

    Hi xellos,
    I'm not sure what you need, but if my feelings is right, than what you  want to do is sort of motion detector based on PIR sensor and some ucontroller. It this is what you need, than once again, such a question is rather suitable for other discussion forums, like LabVIEW Embedded.
    However, in general you can go for ARM or Blackfin when thinking about embedded platform. See following links to get more ingormation on ARM and Blackfin with LabVIEW:
    NI LabVIEW Embedded Module for ARM Microcontrollers
    NI LabVIEW Embedded Module for ADI Blackfin Processors Development Kit
    With choosing sensor, I suggest simple googling - with relativly little effort you can find many sensors. And you can pick on specification and requirements you have (just to note, National Instruments is not producing and usualy not selling sensors).
    Regards,
    Stefo

  • How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

    Dear All,
    We are having an infrastructure setup of around 500 client computers managed through group policy.
    Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
    Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
    It would be great if you can assist me with the following query.
    How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
    Can we disable Network Tab on the left hand pane ?
    explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

    >   * explorer.exe is blocked already, but users are able to enter the
    >     Windows Explorer by clicking on the name which is visible on the
    >     Start Menu.
    You cannot block explorer.exe when you do not replace the shell - the
    desktop you see effectively IS explorer.exe...
    Your requirement sounds like you need a custom shell:
    http://gpsearch.azurewebsites.net/#2812
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Error while creating the HTTP client with destination GB_DPSRetrieve

    Hi All,
    It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
    Please find the error log below and throw some light why the HTTP adapter is getting error -
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>SystemError</SAP:MessageClass>
      <SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
      <SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
      <SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
      <SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
      <SAP:Service>GGMailbox</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>SAP_DEV_ERP2005</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
      </SAP:Receiver>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>BestEffort</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
      <SAP:P1>GB_DPSRetrieve</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20071121</SAP:Date>
      <SAP:Time>155130</SAP:Time>
      <SAP:Host>lbsth-tb1ci</SAP:Host>
      <SAP:SystemId>XIS</SAP:SystemId>
      <SAP:SystemNr>00</SAP:SystemNr>
      <SAP:OS>Windows NT</SAP:OS>
      <SAP:DB>ORACLE</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>023</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PISUPER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>000</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
      <SAP:QIdInternal />
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID" />
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>0</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
      <SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
      <SAP:InterfaceAction>INIT</SAP:InterfaceAction>
      <SAP:RandomNumber>15</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
      <Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
      <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
      </SOAP:Body>
      </SOAP:Envelope>
    Regards,
    Kishore

    Hi,
    In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
    If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
    Also check if the Target system can be reached from the XI server to validate the configuration parameters.
    Regards,
    S.Santhosh Kumar

  • How to create a VPN client for Windows Phone 8.1?

    We have our own VPN client for Windows and Android. I would like to create a VPN client  for Windows phone 8.1. After referring these site I found that there are some third
    party VPN plugins available for WP 8.1.
    I checked OpenVPN but it is also not available for WP 8.1.
    Is there any APIs available for creating a VPN client in WP 8.1 similar to
    VpnService provided by Android SDK ?

    The VPN APIs for WP8.1 are not open at this time.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

Maybe you are looking for

  • How can I specify the default tab in a CHM Output?

    My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly se

  • Show the filename in a edit_text box in a stamp dialog

    Hi, Im tryint to create a stamp that pops-up dialog. One of the dialog text box must be filled in by default with the filename of the document that has to be stamped. This is a part of the code: var dialog = { issuepurposeValue: "", reviewresultcodeV

  • I moved to Apple Mail from Outlook. It is very slow.

    I use a Mac Pro (2.8GHz Quad Core Xeon) with 10GB of RAM. I have a SSD system drive with 209GB free space. I type ahead after about 40-50 characters when creating a message. It takes 60-90 seconds to open a reply. Absolutely nothing else on this syst

  • Link software and word mole for z10

    I am unable to set up BlackBerry Link software for my z10. The system restarts before the installation completes. I have win7 with 4gb ram and i5 processor on my desktop. Word mole does not exist on my z10...my favourite game. Pls help

  • Eternal order.

    Hi, I have this problem with eternal orders. How can I add in internal order's control data in the field tranasactions allowed the business transaction RFBU, RFJG, RFST. I m trying to post an FI-Document with an eternal order but this cannot be done