Webserver remote directories issues

We have netware 65sp5/sp6 in production on a multicontainer network. I
have configured Apache to allow user webpages to be served from their home
directory/PUBLIC_HTML. This works great on three containers, but the 4th
refuses. Logs show it not parsing accounts on that system for the proper
directory, instead looking to the actual WWW server and of course failing.
We HAVE discovered a user key that is not on accounts setup prior to the
NW6x upgrades is critical to this technique working, but I have assured
myself that the test users in each context are setup similarly... Now,
this containers server experienced a failure a few months back and we had
to restore and rebuild from scratch.
It is my assumption there is some deep access configuration that is
different with this server and not the others, but I cannot find it.. How
do I make sure the homedir is being searched properly and how do I debug
things at this level when the normal logfiles don't give us any real
detail. The users do have all normal access (i.e., Groupwise, data
directories, etc.)
Your advice would be greatly appreciated.
MJK

Update to debugging...
Tried replacing the mod_edir.c with the latest and greatest... Now, when I
try to go to the unreachable server for the users home dir, it will kill
the main www page... Very odd... Only way to get it back is to issue
AP2WEBDN & AP2WEBUP.
MJK

Similar Messages

Logic Remote connectivity issues after updating to iOS 8 (solved!)

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Thanks very much! This solved my connection problem.

Oracle 11g - External Table/Remote File Issue?

Oracle 11g - External Table/Remote File Issue?
=============================
I hope this is the right forum for this issue, if not let me, where to go.
We are using Oracle 11g (11.2.0.1.0) on (Platform : solaris[tm] oe (64-bit)), Sql Developer 3.0.04
We are not allowed to put files on the CSV file system (Server A), where DB instance is running. We are able place CSV files on another server(Server B), where DB instance is not running.
We are trying to use oracle external table to load text files in .CSV format.
How do we create a Directory (Create Directory) on Server A DB to point to File system of Server B?
Is it feasible?
Any idea?
Thanks in helping.

The Solaris DBA should be able to mount the filesystem for you. Either that or you have to get creative transferring the file like this;
http://www.linkedin.com/groups/Getting-creative-external-table-preprocessor-140609.S.50474382?qid=ba673ce4-c4bb-40c5-8367-52bd2a2dfc80&trk=group_search_item_list-0-b-ttl&goback=%2Egmp_140609
Cheers
David

Callmanager Conferencing with remote locations Issue

I am new to using callmanager, and I need a little help.
I have created a meet me number on my callmanager. Once a session is begun, all local network users are able to join the conference call with no problems..
If a remote location hosts a meet me call, all my local network users are able to join THAT session with no problems as well.
But if I host a meet me session on MY local network, remote locations CANNOT reach my session. The line remains silent when they dial in.
I've been told to check the codecs which seem fine and we are checking for a firewall issue, but all normal calls local and remote work just fine. It's only the conference bridging that causes issues.
Please help.
Thanks

Hello,
Thank you very much for replying.
The configurations, I've been told, are correct. G711 for intrasite and G729 for intersite. And region and device pools correct as well.
I presented the HW conf bridge solution to a coworker who said it makes sense, but at this time, I don't have access to a hardware conference bridge. Is this the only solution?
From: prbt
To: Nichole Ketchum
Sent: Wednesday, August 3, 2011 1:54 PM
Subject: - Re: Callmanager Conferencing with remote locations Issue
Cisco Support Community
Re: Callmanager Conferencing with remote locations Issue created by Priya B.T in Unified Communications Applications - View the full discussion
hi,
please check the following on the call manager,
- Check the region configuration on each device pool.
- Then check the region configuration between the two regions.
- One of the best practices followed by Cisco is, the intrasite region settings should be g711.
- And the region settings between inter site should be g729.
- G729 is not supported by software conference bridge, it is only supported by hardware conference bridge.
- So add the hardware conference bridge to the MRGL of the phone.
- And the hardware conference bridge has to be first in the list, that is before the software conference bridge.
please let me know if this helps or we can do further trouble shooting on this issue.
Reply to this message by going to Cisco Support Community
Start a new discussion in Unified Communications Applications at Cisco Support Community

Rsync - to compare remote directories

Hi Friends,
I did use the below syntax to compare remote directories , but it listed all the files in the source directories even if the files are same as in the target directory.
rsync -avn -e 'ssh -l target user' target:path path
Thanks,
Revathi

The files might be the same, but do the permissions and ownerships match? rsync's "-a" option checks for these, too; "-a" is the "archive mode" and equals to "-rlptgoD" (where "-p", "-t" and "-o" preserve permissions, time stamps and ownerships).
BTW, the "-e ssh" option might not be necessary. Recent versions of rsync default to ssh anyway. You can use "user@target:path" instead.
Edited by: Lenz Grimmer on Jun 7, 2011 1:16 AM

Keynote remote will not pair with ipad after update to 10.7.2-bluetooth issue or remote app issue?

Noticed keynote remote will not pair after updating. Bluetooth light flashes a couple of times then goes off. I'm wondering if it's a bluetooth issue or a keynote remote app issue.
Any suggestions or remedies?
thanks

Then again, it may not.
I've tried all the things recommended in the Apple KB article, and it doesn't work. Mulderscully is right, in the recent iOS 5 upgrade, Bluetooth is not turned on (at least, its symbol is not visible) from within Keynote even if you turned it on in the Settings menu. Posts in another thread recommended using another app to establish a Bluetooth connection between the iPad and iPod (I used Touch Rummy), then switching back to Keynote and Keynote Remote. This does work for me, but it is an awkward workaround. Shouldn't 'It just work'?

Windows Home Server 2011 - Remote Desktop Issues

I had been using my administrator account to log into my headless Home Server remotely. Didnt have to do it often. I tried today and got:
"To log on to this remote computer, you must be granted the Allow log on through
Terminal Services right. By default, members of the Remote Desktop Users group have this
right. If you are not a member of the Remote Desktop Users group or another group that
has this right, or if the Remote Desktop User group does not have this right, you must be
granted this right manually."
How can I log into the machine to give myself rights? Am I going to have to yank it down out of the closet and hook it up to a monitor?

Your question has not been answered.
Windows Home Server 2011 does not use domains, so even if you had Windows 8.1 Pro, you'd still be left without a solution. I have one PC with Windows 8.1 Enterprise and that does work with Home Server; and a laptop with Windows 7 Pro and that works fine
too. Like you, I have issues with Windows 8.1 Pro.
Does anyone from Microsoft Server actually read these posts?
@PeterPensive,
the OP's original question was relating to "linking/combining" an MS Account with a Win8.x local account. That question was answered. (the answer is no), so, for a WHS scenario, linked accounts aren't possible, but, in Win8.x, an MS Account might be suitable
for use with WHS.
Are you confirming that an MS Account on Win8.x works ok with WHS?
< Also, this is a community-driven forum - MS staff rarely, if ever, participate here.. >
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Solution manager Remote Connection issues

Hi
I'm currently in the process of setting up Solution Manager 7.1 on windows Server 2008r2 using central system.
I did the prerequisite check & the Solman installation and i'm actuallly working on the post-installation steps.
I'm experiencing difficulty with the step : "Configure Remote Connection to SAP".
I followed the informations provided on :   http://service.sap.com/remoteconnection
In the technical prerequesite you have to set up a connection to sap support.
So i have to choose a connection type : I selected Internet connection so my first question is : do we need "VPN with SNC" or "VPN OR SNC" ?
I personnaly understood VPN or SNC.
So from here i decided to use SNC.
The first step was to set up & configure the SAProuter. I decided to do it on an another computer on the same domain ( not on the same computer where Solution Manager is installed ) but i'm not sure it is necesary
I assume I can install Saprouter on the same location as the Solution manager? do you recommend it ?
The Basic Functions testing with niping is working.
The next step is : "establish Internet Connections"
So now i can choose between SNC or VPN : my goal is to establish the connection as fast as possible.
I actually don't have a switch available ( i can get one if necesary but time is running ... ) so i'm opting for the SNC solution.
I tryed to get the certificate for the saprouter but i don't have a register SAProuter, but when i opened a customer messager for component XX-SER-NET, SAP answered about the impossibility to access SAP service Backbone with an SNC , saying that i will need to register a VPN site to site connection to SAP => i don't get it .... Can someone explain it to me ?
So please can one of you guru's tell me how to set this remote connection :
-which materials ( server / switch / firewalls ) ?
-where to get the right documentation ?
-What about DMZ ?
-I have a single IP Address is that enough ? ( setting up nat for port 3299 )
- do i have to contact a service provider ?
My idea was initially to set up the SAProuter on the same computer as the SOLMAN setup & use SNC communication to communicate with SAP but it doesn't seems that easy. Do i need separate installation for Saprouter <=> Solution Manager. ?
What's the minimal infrastructure to establish this connection ?
In addition to that, after configuring the SAProuter, i had trouble with the SAPMMC : on my system , on the instance 0 , the process disp+work.EXE won't run ( yellow light )and i can't find where i made a mistake if you have suggestions ...
Really need your help, i'm on a short deadline ... Any help, even incomplete, would be appreciated.
Thanks a lot.

Thx for the answer.
I actually managed to register my saprouter with SAP and was granted with CN/OU & connection informations.
I followed this guide : http://service.sap.com/saprouter-sncdoc with the addition of this guide : http://wiki.sdn.sap.com/wiki/display/Basis/SAProuterviaSNC.
My first issue : I'm running with a Windows server 2008 r2 enterprise edition 64 bits with a processor Intel Xeon 2.4ghz ( dualcore). so i decided to use the crypto folder "nt-x86_64"
For the environment variable i set as System variables SECUDIR = C:\usr\sap\saprouter and SNC_LIB = C:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll
The generation/install of the certificate is alright ( sapgenpse get_my_name -v -n Issuer is OK )
using the command :saprouter -r -K "p:CN=mycn, OU=myOUnbr, OU=SAProuter, O=SAP, C=DE" i have
I get the following message : trc file     dev_rout
                                                no ligging active
Its strange cause it looks like its running but when i check the services running on windows saprouter isn't started .... How to know if SAProuter is running right ?
If i folow the SAP procedure : Step 3 : test of the ip connection by the customer : SAP Remote Services : technical preparation ( see SAP Note 812386 ) : it's ask in the note to implement note 766505 via SNOTE : i get the following error msg : Error in remote connection to destination SAPOSS : Error when opening an RFC connection ( LB: Hostname or service of the message server unknown#DEST = SA
What's wrong ?
If i use T oss1 in parameter => technical setting => i set my saprouter info in SAProuter 1 ( at customer site ) with instance no. 99 and if SAProuter and SAPNet Message Server at SAP i put the following : Name : sapserv2 / IP Address 194.39.131.34 intance no. 99 and message server name oss001/ DB Name 001/ Instance no.01.
When trying to "Logon to SAPNet" i have an error Unable to connect to SAPNet message server ( default connection will be used ... )
and followed by the error screen : "partner '80.15.173.168:sapdp99' not reached WSAECONNREFUSED : Connection refused. do you want to see the detailed error description ? "
Details : module nixxi.cpp / line 3286 / Method : NipConnect2:80.15.173.168:3299 / Return code : -10 / System call : connect / Error No : 10061 / Error Text WSAECONNREFUSED: Connection refused / Counter : 10
Any idea ?
when doing niping.exe -c -H /H/mylocalSR/H/194.39.131.34/H/194/39.131.34 i obtain :
Wed Dec 07 21:20:09 2011
connect to server o.k
Wed Dec 07 21:20:09 2011
send and receive 10 messages (len 1000)
times -
avg   122.148 ms
max   193.731 ms
min   81.564 ms
tr 15.990 kB/s
excluding max and min :
av2   118.273 ms
tr2   16.514 kB/s
Is it the expected output ?
I've maintained system data in service.sap.com/system-data ( selecting the sap router ) then i tryed to use the SAP service connection, downloaded the .exe but i can't find the stfk.oez. I realized that in my maintain connection screen i have no space for entering any routestring. Seems wrong ?
Do i have to use the SAO?
i've made nat redirection from my router as this : from my public ip to my lan ip ( 192.168.x.x) what should i enter in the routestring : /H/public or lan or hostname ?/S/3299 ?
Hoping you can help me ! ( the goal of all this is to set up RFC connection for postinst step of Solution manager ).
Edited by: BLANCHARD Guillaume on Dec 7, 2011 10:47 PM

Need helps for remote connection issue

Dear guys,
Today, I got a problem regarding remote connections. My Oracle stopped responding to remote connections. (tried to connect by sqlplus with service name, and sqlplus hung) Tnsping works. Local connection works (tried to connect by sqlplus without service name).
Have to stutdown by sqlplus and oracle did not respond. Shutdown the server (windows server 2003 standard edition), system stop responding (guess it was caused by oracle service). Had to shutdown by pushing the power button. After it restarts, everything come back to normal. No error is logged in alert log.
Any ideas regarding this issue? Many thanks.
G.B.
Still studying this issue. Found an SQLNET.log in the %ORACLE_HOM%/NETWORK/LOG fould. It reads:
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 06-APR-2006 10:43:52
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Seems it's related to authentication service issue. So, I just commented out SQLNET.AUTHENTICATION_SERVICES= (NTS) from sqlnet.ora even my database functions well after restart. But I'm not sure if this is the solution and still wondering what's the root cause of this error.
Message was edited by:
G.B.Q.

Hi there!
Modify the following entry in sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
to
SQLNET.AUTHENTICATION_SERVICES= (beq,none)
and you will be fine,
Regards,
Jay Munshi
http://jaydba.tripod.com

Remote debugging issue: Address already in use

First, I want to explain that to use remote debugging in oracle UCM server (IdcServerNT.exe), I add these lines at */server/bin/intradoc.cfg*:
JAVA_OPTIONS_debug_enable=-Xdebug
JAVA_OPTIONS_debug_options=-Xrunjdwp:transport=dt_socket,server=y,address=8000,suspend=n
and since the JAVA_OPTIONS is shared between admin server (IdcAdminNT.exe) and non-admin server (IdcServerNT.exe), to prevent "Address already in use" error, I added same lines but with empty value into */server/admin/bin/intradoc.cfg*:
JAVA_OPTIONS_debug_enable=
JAVA_OPTIONS_debug_options=
or alternatively enable it but use different port for the "address=xxx".
Now the issue is when I had run the non-admin UCM server with remote debugging enabled, then I tried to run the Component Wizard, I got "Address already in use" error:
ERROR: transport error 202: bind failed: Address already in use ["transport.c",L41]
I found out that's possible because Component Wizard (ComponentWizard.exe) is using same setting file with non-admin server (IdcServerNT.exe): */server/bin/intradoc.cfg*. It's obvious that happened because of ComponentWizard.exe is in same location with IdcServerNT.exe, so I think other tools like Batch Loader and System Properties will be affected with same issue too.
Because of this issue, everytime I want to open Component Wizard, I had to stop the non-admin server which is inconvenient.
So, the question is there a way to define separately or disable the JAVA_OPTIONS_debug_enable & JAVA_OPTIONS_debug_options for Component Wizard?

WillT wrote:
My run method was being called somewhere else and I can't find out whereOkay, but changing from implementing Runnable to extending Thread won't change that one whit. You must've also changed something else.
Extending Thread is the wrong approach, since you're not creating a special kind of Thread.

Windows 8.1 DPI scaling and remote desktop issues

On my desktop display (2560*1080 21/9 display) I am using no DPI scaling. (100%)
When I remote into this machine from my Surface Pro tablet the display changes to 1920*1080 to fit the surface's display and scaling also kicks in. (125%)
When I afterwards login to the main machine directly, scaling is completely off. Large text and headers in explorer and small icons. Any way to fix this issue ? Loging off and back on fixes it but usually I'd like to keep the user logged on so my programs
keep on running.

If you change the scaling to 100% while logged in over RDP, then disconnect or log off, does it stick?
I had to grin just a bit... Microsoft has been touting the integration of their tablets and yet last time I remoted into my Windows 8.1 desktop workstation from my
iPad using a free RDP app It just kept the monitor 1 display size (1600 x 1200) and didn't mess at all with the desktop settings.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Remoting Connection Issue: Channel.Connect.Failed

Solution: Turns out my client had installed a new
firewall/web management system without telling me. My app was being
blocked. :(
Hi there,
I have a Flex app using remoting and ColdFusion. My client
has suddenly experienced the following error:
Channel.Connect.Failed
NetConnection.Call.BadVersion: url: '
http://mysite/flex2gateway/'
The weird thing is the app works when you access it from
outside of my client's office. I'm wondering if it is some sort of
firewall issue on their end. Any thoughts?
Thanks.

The issue is probably do to a problem with your configuration. There is probably a destination or endpoint issue. A nice and short tutorial on this can be found at http://flexbandit.com/archives/55.

Remote Path Issue

In <param name="movie" tag, if i specity like below it is
working fine.
<param name="movie" value="../swf/xyz.swf">
Suppose my file xyz.swf is in some remote system name abc and
in folder def. How to specify the
path in that situation. I tried like following but it is not
working
<param name="movie" value="//abc/def/xyz.swf">
Any help in this issue is highly appreciated and Thanks in
advance.

Here is the code and I modified at both places
Thanks mercl for the earlier responses and Thanks in advance
for next response
In the code what does mysite.com represents.
<object
classid="clsid:D27CDB6E-AE6D-11CF-96B8-444553540000" id="obj1"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,40,0"
border="0" width="980" height="700">
<param name="movie" value="
http://www.mysite.com/system1/swf/1_lowoilpressure_switchindication_testing.swf">
<param name="quality" value="High">
<param name="wmode" value="transparent">
<embed src="
http://www.mysite.com/system1/swf/1_lowoilpressure_switchindication_testing.swf"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" name="obj1" width="980"
height="700" quality="High" wmode="transparent"
swliveconnect="true"></embed></object>

VMM 2013 R2 Manager - Remote Control issue

Hello Everyone,
Looks like Im having a remote control to the VMM server issue. Everytime I try to connect to console of the VM machine, I get this error:
"An authentication error has occurred Code: 0x80004005" Remote computer: servername.mydomain.com"
The VMM server has been added to our domain and I'm logged in as the Domain Admin. Is there a permissions group I might be missing or is it something else?
Please Let me know
Thank you
Devon

The 'first' VMM administrator is the domain user account of the logged on user that installed VMM.
If the domain admin performed the install of VMM, then they would be the first administrator by default. If someone else did, than that user is the first administrator and they have to add the domain admin as an SCVMM administrator within SCVMM.
Also, you cannot move an SCVMM server from one domain to another. You will end up with broken security. You have to re-install SCVMM.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Database link and remote connection issues..

We have a sql script... Large script that we would rather not post here. The script connects through a dblink to a remote site at the beginning and gets thousands of records. We then process these records locally which takes around 40 minutes. The link is unused for that time. Then the same script attempts to connect again through the dblink and set a confiirmation flag. But this final confirmation step routinely fails. The script used to work fine when the confirmation was at the beginning of the script.
My understanding is that when you go out through a dblink it creates a session on the remote computer. The session stays active until the local proc ends or the session times out. Successive calls through the dblink from the same proc will reuse the same remote session? Is this true?
So, Is the inactivity period possibly causing this dblink connectivity issue? We put some test sql select statements in the script here and there selecting from dual at the remote site to test the link inbetween major proc calls. Sometimes even these fail. What do I have to do to keep this link active? Is this even my issue?
Like I said this script worked fine when the confirmation piece was at the beginning right before we start downloading files and basically no inactivity period... Now we download files and confirm at the end with a 40min to 2 hour inactivity between.
The remote site as well as the network claim that they are not dropping us... The only piece of information I can provide is that on our side SQLNET.EXPIRE_TIME = 10 and on there side SQLNET.EXPIRE_TIME = 0. I've read that others solved this issue by manipulating this value.
Here are some of the errror message we get in our script...
ORA-03114: not connected to ORACLE
ERROR at line 1:
ORA-02068: following severe error from DMVAIS
ORA-03135: connection lost contact
Edited by: Mark Reichman on Nov 25, 2008 12:47 PM
Edited by: Mark Reichman on Nov 25, 2008 12:57 PM

What version of Oracle?
What are the values of the following database parameters?
open_links max # open links per session
open_links_per_instance # open links per instanceAny chance you are exhausting one or both these parameter values?
Have you ran a check on the network connection between the two machines?
HTH -- Mark D Powell --

Webserver remote directories issues

Similar Messages

Maybe you are looking for