WebService Tab not showing in OC4J Home

Hi,
I am new to J2EE concept and OC4J. I have installed one and created a OC4J standalone instance. Deployed a few test application and they are working.
IAS Version : 10.1.4.3.0
OC4J Version : Oracle Container for J2EE 10.1.2.3.0
OS : HP UX
I have 2 questions.
1) While googling for more samples I found the examples are mentioning about a webservice tab in the OC4J home.
I cannot see any webservice tab in my OC4J home all I have is 3 tabs (Home,J2EE Application, Administration).
Is anything wrong with my installation?
2) I found a jdk location in IAS_HOME/j2ee/ location. It is of version 1.4. I guess this is the latest version of OAS and
OC4J. So will it support only classes compiled in JDK 1.4. I compiled a servlet class in JDK 1.5 and deployed it in
the OC4J. It was giving unsupported class version.
Thanks in advance,
Ruhu

Hi
You have to flag the check box POST EI in MIGO for your excise group.
The path is
SPRO>>>>Logistics - General>>>>>>Tax on Goods Movements>>>>>>India>>>>Basic Settings>>>>Maintain Excise Groups
Kindly and maintain the above
Heading 2: Post Excise Invoice Captured in MIGO h2.
Enables users in manufacturing plants to post incoming and outgoing excise invoices in the standard Goods Movement transaction, (MIGO).
It also enables users in depots to post incoming excise invoices (for goods receipts) and RG 23D selections (for goods issues).
Use
Since when you post an excise invoice, the system creates an entry in register RG 23A or RG 23C (manufacturing plants) or register RG 23D (depots), activate this function only if the users working with this transaction are familiar with the excise duty system.
Dependencies
When you run the Goods Movement transaction, it shows two additional Excise Invoice tabs, one at header level and one at item level.
You enter the goods movement details and the excise invoice information. When you save the goods movement, you can also post the excise invoice.
regards
Prashanth
Edited by: Prashanth@SD on Apr 10, 2011 3:05 PM

Similar Messages

Excise Item TAB not showing in MIRO

Hi Expert,
While doing Miro, Excise Item Tab not showing we have check the details Like Tax code, Chapter ID, and excise rate Material.
Kindly help me ,
Thanks
Pranav

Hi,
Please go to transaction code MIGO and check whether excise tax exists or not ? if yes, please click on and click on Miscellaneous tab
In case it is shown as In process we would not able to see excise details in MIRO.
Hope, this solves your issue else revert.
Regards,
Tejas

Audible books not showing up in home sharing

On my new mac mini I brought some books from Audible they appear in iTunes
under "Books" but they do not appear under the home sharing and I am unable to tranfeer
them to my older machine where I keep my media files

Guess I should have looked at FAQ first looks like Apple does not allow us to do this
Re: All audiobooks do not show up in home sharing
Mar 15, 2011 8:13 PM (in response to Carol G)
Just in case anyone else has this problem, here is what Apple replied to me: "Dear Carol, Greetings from Apple iTunes Customer Support. I am Sayantan and I am glad to assist you today. I understand you are unable to share audio books using home sharing. I know how upsetting it can be. I will help you with this. Unfortunately, you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files. In accordance with iTunes Store policy, you may share the music in your library and playlists with up to five other computers, provided the following conditions are met: 1. Your computer is using Mac OS X version 10.4.11 or later, Windows XP, Windows Vista or Windows 7. 2. The other computers are on the same local area network as your computer, in the same subnet. To share a song in a password-protected shared library or playlist, you will need to enter a password. To share a song that was purchased using an iTunes Store account that is not authorized on the computer you are using, you will need to enter the Apple ID and password with which the song was purchased. You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files. To prevent other computers on your network from seeing or listening to songs in your library or playlists, turn off music sharing. More detailed instructions about sharing music may be found in the Help menu. In iTunes, select iTunes Help from the Help menu. Click "Contents," type "sharing" (without quotes) in the search box, and press Enter. To read more about one of the topics that appears, double-click it. Carol, thank you for being a valued customer, your satisfaction is of the utmost importance. If you have further queries please write back to me. I will be happy to help you. Have a great day! Sincerely, Sayantan
iTunes Store Customer Support" Message was edited by: Carol G
MacBookPro 2.4 GHz, 4GB RAM, 256GB SolidStateDrive,, Mac OS X (10.6.6), Intel iMac +500GB ext.HD, 64GB iPad, 32GB iPodTouch, 32GB iPhone 4
All audiobooks do not show up in home sharing

"retail" tab not showing while creating PO thru' ME21N in IS-Retail

"retail" tab not showing in item level while creating PO thru' ME21N in IS-Retail

Hi,
Go to SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level - Here for the field selection key "ME21N", under field selection group "Administrative data, item", mark following fields as optional ;
Prior vendor
Season
Reason for ordering
Revision level
And then check.

ITunes Store music tab not showing up

iTunes Store music tab not showing up

FollowUp - Problem Solved.
Just in case anyone else was experiencing the same issues, I pinpointed it down to a corrupted iTunes preference file - com.apple.iTunes.plist.
I created a new user account, lauched iTunes and it worked fine, no black drop down window appearing, so I went back into my account and deleted this and relaunched iTunes and the drop down window showed all the search results again, not the black window as seen in my example image.
Hope this helps others!

CIN TAB not showing

Hi all,
In XK01 transaction CIN tab not showing..
I feel its an authorization problem..
Can you solve??
Tonmoy.

doing a trace will tell you more on whether this is authorization-related.
if you are uncertain on how to interpret the trace, you can always copy it into this thread.

"Apple events" tab not showing on Apple Tv

I have the latest Apple tv with the latest software but the "Apple events" tab isnt showing on the home screen of my Apple Tv. I want to watch the Monday event so please help with some suggestions to the problem. Thank you in advance!

Welcome to the Apple Community.
Have you actually seen anything that says it should be there.

ICal in new work computer not showing events on home Mac or iPhone

HELP! Just got my new work computer (a MacBook) and I'm trying to get my iCal to sync from my Mobile Me account. I have set the preferences to sync iCal calendars and have synced several times. The events that I have already entered that are showing on my home MacBook Pro and my iPhone are still now showing on my new MacBook. Am I missing a step??

Let make sure I under stand: You have a home MacBook Pro and an iPhone, both of which are syncing. But your new Macbook at work/office will not sync.
You have gone to the Mobleme preferences on the new office MacBook, logged in, selected sync, Clicked the advanced tab and added the work Macbook to the list of Registered computers.
Then you went back and checked the "Synchronize with MobleMe" checkbox.
Choose "Manually" at this point. Then check what you want to sync, such as Calendars.
Now you go back and select "Advanced again."
Select your home computer from the list.
Click "Reset Sync Data"
Make sure the arrow is going from the cloud to the computer.
Click replace and it should put the data in the cloud (which is from your home computer) on the computer you have selected.
Let me know if this works out.

HP webservices tab not available when using HP Jetdirect 2700w wireless print server

I recently bought HP Laserjet Enterprise 500 m551 dn color laser printer with HP jetdirect 2700w wireless print server ( one day old at this time).
I was able to configure the device and enable/ use eprint services using the embedded server with a wired connection.
However when I attach a the mentioned wireless print server, the "Webservices" tab disappears from the configuration website, the printer reports that the eprint services are not enabled and ofcourse hp eprint or google cloud print do not work. The printer appears offline at eprintcenter. Everything else works fine.
On the product website for the wireless server, it clearly states that this is compatible with eprint services.
What am I doing wrong.
Arjun
HP Laserjet Enterprise 500 m551 dn color laser
HP Jetdirect 2700 w wireless print server
Win 7 Ultimate x 64
Netgear WNDR 4500

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Jetdirect board here:
http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Depolyed PRovider is not running in Oc4j home,

Hi,
I depolyed the JPDK provider and portlet to oracle application Server 10g's Oc4j home. The depolyment is sucessfull, but the provider is not running,
The PDK test page failed to display the provider sucess message.
So I am not able to register the provider with ORacle Portal.
Pleaese let me know if you have any workaroud to get this fixed.
Thanks

Please tell which version of OAS and which deployment guide are you using. what errors are you getting if you are getting any.
thanks

SOLUTION: tab not showing in ME21N/ME22N with badi ME_GUI_PO_CUST

Hi,
I implemented BADI's ME_GUI_PO_CUST and ME_PROCESS_PO_CUST to show a custom tab in the header section of ME21N, ME22N and ME23N.
But after implementing the BADI's, the tab showed up in ME23N, but not in ME21N and ME22N.
So I started looking for a solution in the SDN forum, and I saw that there were a LOT of people with the same problem, but nobody ever posted a solution.
So here is the solution:
So, I added the fields I wanted to show in the structure CI_EKKODB, implemented the BADI ME_GUI_PO_CUST (the methods SUBSCRIBE and MAP_DYNPRO_FIELDS), and the BADI ME_PROCESS_PO_CUST.
After that the tab showed up in ME23N, not in ME21N or ME22N.
So I found an SAP note saying the following:
Question:
I implemented the 'ME_GUI_PO_CUST' Business Add-In to display customer-
specific tab titles in the EnjoySAP purchase order. They are only shown in display mode (ME23N) however, not in create or change. Why?
Solution:
You may have forgotten to assign a field status to the user-defined fields on these tabs. As a result, the system automatically interprets the field status as 'hidden' in create and change modes. However if a tab contains only hidden fields, then the entire tab is set to hidden. In display mode, fields without a field status are automatically set to display. That is why the tab is displayed in this case.
To assign a field status to the user-defined fields, use the methods provided for this purpose in the Business Add-In 'ME_PROCESS_PO_CUST' (compare sample source code in the FIELDSELECTION_ITEM method).
So in my case, I had to add some code to the FIELDSELECTION_HEADER method of the BADI ME_PROCESS_PO_CUST.
This is the code:
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER.
DATA: l_persistent TYPE mmpur_bool.
FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
* if the item is already on the database, we disallow to change field badi_bsgru
l_persistent = im_header->is_persistent( ).
*   IF l_persistent EQ mmpur_yes.
    READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY metafield = mmmfd_cust_01.
    IF sy-subrc IS INITIAL.
      <fs>-fieldstatus = '*'. " Input
    ENDIF.
*   ENDIF.
endmethod.
But then, I realized that this BADI was never triggered. When I entered one of the transaction codes ME21N, ME22N or ME23N, the code in the fieldselection_header method was never executed.
So I went to transaction SE18, and entered ME_PROCESS_PO_CUST in 'Enhancement Spot' and pushed the button display.
And there in the tab 'Enhancement Implementations', I saw an implementation that was not mine, and that did not show up in the overview of the SE18 'BADI NAME' tab for the same BADI... which to me seems strange.
So as you may know, there can never be more than one active implementation of the BADI ME_PROCESS_PO_CUST.
So I disactivated my implementation and put my code in the existing implementation.
And after that it worked!

implement first badi :ZME_GUI_PO_CUST:
METHOD if_ex_me_gui_po_cust~subscribe.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
* we want to add a customer subscreen on the item detail tab
   CHECK im_application = 'PO'.
   CHECK im_element     = 'HEADER'.
* each line in re_subscribers generates a subscreen. We add one subscreen in this example
   CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
   ls_subscriber-name = subscreen1.
* the dynpro number to use
   ls_subscriber-dynpro = '0001'.
* the program where the dynpro can be found
   ls_subscriber-program = 'SAPLMEPOBADIEX'.
* each subscreen needs his own DDIC-Structure
   ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
* a label can be defined
   ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
   ls_subscriber-position = 4.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
   ls_subscriber-height = 7.
   APPEND ls_subscriber TO re_subscribers.
ENDMETHOD.
implement 2nd badi : ZME_PROCESS_PO_CUST:
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER.
   DATA: l_persistent TYPE mmpur_bool.
   FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
* if the item is already on the database, we disallow to change field badi_bsgru
   l_persistent = im_header->is_persistent( ).
*   IF l_persistent EQ mmpur_yes.
     READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY metafield = mmmfd_cust_01.
     IF sy-subrc IS INITIAL.
       <fs>-fieldstatus = '*'. " Input
     ENDIF.
*   ENDIF.
endmethod.

Partition Tab not showing in Disk Utility

Hello again everyone,
I'm attempting to partition my LaCie 2TB (RAID1) Disk in Disk Utility, however the partition tab is not showing up..
There are 4 items visible in the Disk Utility window:
1) the Internal OS Disk
2) the LaCie 2TB (RAID1) Disk
3) & 4) the two slices/partitions of the LaCie mirrored RAID
I select the 2TB LaCie RAID1 Disk, however it only shows the "First Aid" & "RAID" tabs.
The "Partition" (as well as "Erase" & "Restore") tabs are not available or shown.
When I select the Internal OS Disk all the Tabs are shown, and when the 2 slices or partitions of the RAID1 are selected it shows the "First Aid, Erase, Partition, Restore" tabs..
Am I missing a step here?? I know I'm not supposed to select the slices/partitions of the RAID, but instead to select the LaCie 2TB Disk itself, however this is the only option which does not show any "Partition" Tab..
Any assistance is GREATLY APPRECIATED.. Thank you!

Have you tried this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I'm sort of confused as to why you would partition a 3 GB drive into just a single 1 TB partition, but that's what I understood you to say. Is this 3 TB drive installed in an enclosure that actually supports a drive of that size? Older enclosures may not and should not be used.

Library not showing up in Home sharing?

Both my Mac and PC have Home Sharing enabled, yet my music and playlists are not showing up on my other computer. Both computers are authorized. Help?

Hi itscrizzy,
Thank you for using Apple Support Communities.
I understand you are having issues with Home Sharing between your computers. The following article provides troubleshooting steps to sort out your Home Sharing setup.
Troubleshooting Home Sharing - Apple Support
Cheers,
Jeff D.

With holding tax tab not showing up in MIRO

Hi,
Im trying to do a MIRO for a vendor which requires with holding tax. The setting in done in the vendor master.However while doing MIRO, the with holding tax tab does not show up.
Does anyone know why with holding tax tab is not showing up in MIRO and what needs to be done.
PS: It is set up correctly in the vendor master and it works and shows up while doing FI transactions.
Thanks

Hello Shruti,
Kindly check if on the vendor master, on withholding tax tab, checkbox "liable" has been ticked.
Also kindly check the reconciliation account defined in the vendor master and compared in GL master record, FS00, should have a field status group of G067- Reconciliation Accounts or its equivalent in case you don't use standard SAP field status grouping.
And also check on the MRIO screen, have you checked "calculate tax" under general tab.
Hope it will help you
Thanks
Para

Access Tab not showing for item level security

I have enabled item level security for the portal page I am working on, but the access tab for the items is not showing.
I have come accross exactly the same problem on this forum and the advice was:
Hi try the following :
go to page properties
set the item level security
clear the cache
clear your browser cache
it should work "
I have tried all that, closed and opened a browser but the access tab is still not showing. This is a 10.1.4 portal on LINUX. Starnge enough I have a testing environment installed on my Windows XP (AS 10.2.0.2 not upgarded to 10.1.4) and I don't have any issues with item security access tab at all.
I would appreciate any clues.
Regards,
Anna

There should be two icons shown for each item when you put the page in Edit mode - Edit and Actions. Click on the Actions icon and "Access" should be one of the links in the list of actions (like hide, expire, delete, move, etc.)

WebService Tab not showing in OC4J Home

Similar Messages

Maybe you are looking for