Websphere setting for Hot code replace

hi ,
these days i need to build my code everytime i make changes ...
previously it was working well ......
i went thru some changes in env .....as there were new addition of MDBs etc in my projects .....
i m using WSAD 5.1.2 .......
i have checked the option we get on server for hot code replace feature ...
is there any other thing i can try ???

-Xj9

Similar Messages

Hot code replacement for local application?

i got hot code replacement working during debugging a removet web application (servlet). however, it doesn't work if i debug a simple (local) application. is there something i forgot to setup? (i'm using Eclipse)

This is an eclipse specific question. It is up to Eclipse to do the code replacement.
Have you tried 3.0-M8 ?

Hot code replacement

How do I do hot code replacement in Eclipse? I tried to write another line while debugging the code, but I got the warning message about the obsolete methods in stack.

I didn't write a new method to replace a method.
Suppose that I have set a breakpoint at
System.out..println("hi"), debug it, and then change
the number 2 to 3 and save it, then I want this code
to work well. It did show a pop up dialog explaining
about obsolete methods.
What does it mean?
     public void testSomething() {
          System.out.println("hi");If you set a breakpoint here. This method was on stack and when you
did hot code replacement and this method "testSomething" becomes
obsolete method. And it will not execute the new modified statement.
To make the new replaced code to execute you should pop this
frame and continue. Or set a breakpoint at line before entering
this method and then do hot code replacement.
          System.out.println("2");
Thanks.

Hot code replace failed - Delete method not implemented

I debug my Java application with Eclipse (3.1). When I change my code during debugging, I get the following error message:
...MyApp at localhost:4540 (may be out of synch) was unable to replace the running code with the code in the workspace.
Reason:
Hot code replace failed - Delete method not implemented
What does that mean and how can I fix this?

This means you changed a class while it was debugging an application and it could not update the class for the application while it was running.
The error suggests you may be running an older JVM, i.e. pre-1.4.2 but this error can occur with any JVM if the change is incompatible with the previous version of the class.
The hot replace often does not work for non trivial changes to code.

Hot Code replace failed- VM inconsistent

When i am trying to deploy the application on WAS through NWDS, it is throwing Hot Code replace failed- VM inconsistent.
Please give your input.
thanks,

Hi,
> It ask me for SDM password, than it throws the error out.
I do not really understand why the SDM password should be checked for debugging...
(Double-)Check the WD-Debugging infos here: http://help.sap.com/saphelp_nw04/helpdata/en/cc/9cb34d9d11f74c98644df2b96b90f1/frameset.htm
And check for standard HotCodeReplacement issues this for example: NetWeaver Portal Debugging - 2, HotSwap your classes
Maybe putting this question within the WD forum could bring out more...
Hope it helps
Detlev

Hot Code Replace Problem...

Hi Everyone,
I am using WebLogic 10 with Eclipse. Whenever i start the server in debug mode and make two three changes in the code... WHAM.... I get the Hot Code Replace error. Is there any way so that the server can keep up with the code changes. Publishing the app again takes approx 40 mins!

Almost always this is a limitation of the JRE/JDK you are using and really
nothing to do with Eclipse.
Try a different VM and see if you have better luck
HTH
Darins
"bobz" <[email protected]> wrote in message
news:75257188f239cb376da31e19b214d2d9$[email protected]..
> hi buddies,
>
> i am getting "hot code replace" problem whenever i change my
> java code and build the project and access the website without re-starting
> the server. so, finally i endup with re-starting the server whenever i
> change the code. this consumes a lot of time. is there any possibility to
> work without re-starting the server even after the code change.
>
> regards,
> satish.

REG : HOT CODE REPLACE FAILED

Hi,
I am able to build and deploy and it says deployment is successfull from IDE. But when i tried to write some new code into my application or debug it,I am getting the error message saying:
"Java HotSpot(TM) Server VM{PSC-PC11741:500021](may be out of synch) was unable to replace the running code with the code in the work space.
Reason:
Hot code replace failed - VM may be inconsistent
Anybody has faced this problem?
Please let me know if you have faced this problem.
Regards,
Anu

Synched and Rebuild it .Created a new activity after reverting back the tasks done before.

Hot code replace failed-VM may be inconsistent

Java HotSpot(TM)Server VM(micserver:50021)(may be out of synch)
was unable to replace the running code with the code in the
workspace
Reason:
Hot code replace failed-VM may be inconsistent
i face the following message and the code keep on retain to the old code.
this cause me have the debugging problem

Hi Yzme,
This happens since you save the changes to your code which is being debugged and your debugger session is still ON.
To avoid this close your debugger before making any changes to your code.
Regards,
Shubham

Selected Sets for Catalog code - 9

Dear all,
I am aware that Selected sets can be created only for Catalog type 1 & 3. But in our business we have classified different type of defect codes in type 9. Evenhough I am attaching specific catalog defect type in MIC, when I see it in the notification screen, whole list of defect type is showing. Is there any possibility to group the defect codes according to the plant? (For your info - We have 4 different plant and each one of them has to use different catalog type as product manufactured is different)
Regards,
R.Ponniah ;

hi,
Use catalog profile for specific defect type, plant wise it is not possible in std SAP, better to define catalog profile and assign all defect type code grp. in that profile and assign that profile with ur notification type. goto config (SPRO)-> Quality Notification>Defect Recording-> define notification type----> and maintain all in that pop- up one by one.
Defect type is not plant specific.
Regards
Edited by: D GURU on Jan 17, 2012 8:26 AM

Hotswap und Hot Code Replacement

I start a Java application which has a certain classpath in the start parameter -cp.
If a certain class has been loaded by that application, I cannot hotswap it. Why not? It seems that Java caches that class and uses it all the time, no matter if I replace it.
The only way for me is to stop the application and to start it again. But since it is a big application, this takes too much time. So I wanted hotswap for Java class files.
I don't need it for debugging. Just for normal development with Java 1.4.2.
Any idea how to solve it?

Another, more usually used, way to reload classes is using a custom classloader. I'd probably try to use a custom classloader rather than HotSwap if possible. I'm a bit unsure about using a debugging interface for doing production stuff. At least I'd first google to try to find success stories or examples of using HotSwap for that. Maybe I'm just a traditionalist scared of the new and unknown...
To reload classes loaded by a custom classloader, simply discard the classloader (stop having a pointer to it) and create a new classloader object. Google for "custom classloader" to find examples.

How to Set Up OOTB code in Local System for Telecom and how to open EM

Hi AIA team,
I have newly stepped to the vast world of AIA.
I am very enthusiastic to learn the same
1.
I have Installed Jdev 11.1.1.4
Want to set up OOTB code for Telecom
2. Open an ID to access Oracle SR
3. Want to Open EM and deploy the code there.
4. I have SCA files of some project. Could SCA files be imported to Jdeveloper.
Please help me
Contact me: [email protected]

Made a copy of MCDOKZNR report and modified external_number_check form: it used to check the number against the interval set in dc10 (as External number range), now the check tries to match any external range.It works ok for my setup, but generally it's no good since original logic is broken.

Transaction code to view process orders set for deletion

Hi PP Gurus
We are trying to search for transaction code to view the process orders which have status as DLFL i.e deletion flag set for the orders. In cooispi, the deleted orders are not shown in the report output.
I request you to let me know if there is any other code through which we can view deleted process orders.
Thanks & Regards
Harleen Kaur

Dear,
In COOISPI put DLT in system status field and execute the report this will give you the list of all order with deletion flags
Also refer this thread,
COOIS Report for Production orders with status DLFL
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 6, 2009 11:16 AM

Set up Company Codes for Contract Accounts Receivable and Payable

HI,
I need clarification on "Set up Company Codes for Contract Accounts Receivable and Payable"
When a company code "ABCD" isn't set up for contract accounts receivable and payable (Menu path:
SAP Insurance -> Collections/Disbursements -> Organizational Units -> Set up Company Codes for Contract Accounts Receivable and Payable), are postings on this company code "ABCD" within FS-CD not allowed and blocked ?
Is it mandetory to specify company codes to post in Contract Accounts Receivable and Payable in SAP FS-CD.

Yes . It is mandatory to extend company code chart of accounts to CA/CR and FSCD.
Srinivas

Setting the doc.type to use for t.code ABUMN (transfer asset ...)

Hi All,
Could anyone show me where to set, in customizing, the doc.type to use for t.code ABUMN (transfer asset within company code)?
Thanks
Umberto Gandalf

AO71                   Document type for posting deprec.
AO72                   Specify posting procedure
AO73                   Define Transaction Type
AO73_INV               Define Transaction Type
AO74                   Define Transaction Type
AO75                   Define Transaction Type
AO76                   Define Transaction Type
AO77                   Define Transaction Type
AO78                   Define Transaction Type
AO79                   Define Transaction Type
AO80                   Define Transaction Type
spro- FA - AA - transactions - transfers
Rgds.

997 getting Reject code for entire set for incoming 810

Hi everyone,
I have an inbound scenario from EDI 810 to invoice IDoc, in which I need to set up the 997 Acknowledgment. This is my receiver EDI Separator channel setting for 997.
I m getting a Reject code(R) in AK5 and AK9 segments of 997 document. Can you please help me with understanding more on why I m only getting R and not A(Accept) code on these.
This is the payload I m using in testing.810:
ISA*00*          *00*          *01*040986076      *ZZ*ADVPCS         *140204*094
9*U*00401*000000001*0*P*>~GS*IN*040986076*ADVPCS*20140204*0949*1*X*004010~ST*810
*0001~BIG*20140203*2100442761*20140129*894054~N1*BT*xxxx~N3*yyyy~N4*SCOTTSDALE*AZ*85260*US~N1*ST*xyz*92*BC9420491~N3*25 BIRCH ST BLDG B - STE 100~N4*MILFORD*MA*01757~
N1*IT*xyz123*21*RI0105595~N3*ONE ASTELLAS WAY~N4*Northbrook*IL*6
00626111~REF*IT*RI0105595~ITD*01*3*0*20140315*45*20140315*45~IT1**3*BT*7889.55**
VC*12599~PID*F****XTANDI 40MG CAPSULES 120/BOTTLE 1360832PC~TDS*2366865~CTT*1~SE
*18*0001~GE*1*1~IEA*1*000000001~
This is the 997 I m getting:
997:
ISA*00*          *00*          *ZZ*ADVPCS         *01*040986076      *140505*1611*U*00401*000000001*0*P*>~GS*FA*ADVPCS*040986076*20140505*1611*1*X*004010~ST*997*0001~AK1*IN*1~AK2*810*0001~AK5*R~AK9*R*1*1*0~SE*6*0001~GE*1*1~IEA*1*000000001~
Thanks a lot in advance!!
Regards,
Anjana.

Hi Anjana,
I executed your input payload and it got successfully processed. I am attaching the 997 which I got in the below.
ISA*00*          *00*          *ZZ*ADVPCS         *01*040986076      *140506*0311*U*00401*000000001*0*P*>~GS*FA*ADVPCS*040986076*20140506*0311*1*X*004010~ST*997*0001~AK1*IN*1~AK2*810*0001~AK5*A~AK9*A*1*1*1~SE*6*0001~GE*1*1~IEA*1*000000001~
There are of points. First in the screenshot which you have shown says Negative Acknowledgment not required. So you should not get the rejected values in 997 segment.
Secondly, could you check if the correct channels are picking up the file for processing.
Could you also let me know the SP and patch level you are currently using.
Best Regards,
Ruchir

Websphere setting for Hot code replace

Similar Messages

Maybe you are looking for