Webtogo fails to go offline when connection lost

HI folks,
I am using the latest release of webtogo with 9iLite. I am using a gprs modem to establish a tcp/ip based VPN connection to our office with a private apn. This is very similar to a normal internet connection via an isp. Going offline and online from the buttons in the web interface works fine. The problem is when there is an unexpected problem with the GPRS connection such as the GPRS service going down or the modem being turned accidentally off, the webtogo local app. does not work. It hangs after the login info has been entered. It expects to connect to the mobile server to go offline, which it can't. Are there any settings to correct this situation.

There is no server communication anymore after the client is offline mode. Everything is local, even the authentication. To prove this, disconnect the network cable while offline and see it you can login and launch the application.
The network drive might have a problem after the GPRS model was shut down. Shutdown the client, disconnect the GPRS modem and startup the client again. If you are able to login and launch the application then you know the problem is the GPRS network driver,

Similar Messages

  • NAS showing offline when connected

    Hi,
    I have a mac running (Yosemite 10.10.1) that is set up with a NAS (WD Cloud) drive which is where all my photos are stored. I set this up with organiszer and was able to import and set up albums, this all worked ok until a few days ago when Elements is saying that the NAS drive is offline when its not.
    Has anyone else had this problem?

    techfreak wrote:
    senderbobo wrote:
    Hi , i have the same problem. Im from Bulgaria and met a girl , which i fell in love with,shes from Australia,but everytime , either when send message or wait a while,her skype shows its offline and i know it isnt.When i restart skype everything is ok.Please help with solution.
    I have the same problem with someone who is only 20 minutes away! Like senderbobo I have to quit Skype  and restart it before it admits that my contact is on line. I tried deleting the eas.db file, as suggested in http://community.skype.com/t5/Live-Messenger/No-Messenger-contacts-showing-in-Skype/m-p/1365173/high... and that didn't make a difference. Everything was working fine until a couple of months ago.
    Bring back MSN chat.

  • Socket I/P stream's read fails to throw IOException when connection is lost

    Hi,
    Socket.getInputStream().readShort() blocks till it reads from the server. It throws an IOException if the connection is lost before calling the method. But it is not throwing an IOException if the connection is lost after blocking.
    That is....
    // If the connection is lost before calling, it is throwing an IOException.
    short s = mySocket.getInputStream().readShort();
    // But, while it is blocked and if I shutdown the server, it's never throwing
    // an IOException and it stays blocked.How should I get around this problem?
    Thank you!

    It's true; a timeout is really the best way.
    One approach I thought about using, where I was in control of the protocol, was to periodically send a "nop" type operation to the socket; a message that doesn't do anything. Obviously not all applications have this liberty, either because you aren't in control of the protocol, or because you want to keep your application single threaded. It's also kind of hackish, and not as good as the timeout mechanism in most respects.
    You also have to be a little careful about what you define as a "connection failure". If, for example, you set up a TCP/IP socket without a timeout, and then physically disconnect the ethernet cable, the connection will in fact stay up. If you come back an hour later and plug in the cable again, the connection will still be there and will pass traffic again.

  • Version 20 broke the resume download when connection lost!

    Before i updated to firefox 20, when my connection was lost, i had the possibility to resume the download.
    Now as soon as the connection is lost, the download fails automatically, and i have to restart it.
    That is so inconvenient in new zealand where i pay per GB and the connection isn't stable at all.
    Is there a parameter somewhere where i can have the same behavior in Firefox 19 and older?
    Thank you for your support.

    Hi DungeonRaider, I assume you know how to switch from the new Download Panel back to the old Download Manager, but in case you haven't seen it, check out this thread: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box].

  • Printer offline when connected to Time Capsule

    I moved my HP All-In-One C4580 from my office to my home. At home, I use my Time Capsule as my primary wireless router.
    I have followed every step that HP tells me, in terms of removing and reinstalling the software, and still, the only way I can print is to have the printer connected directly to my MacBookPro via a USB cable. I was expecting to be able to use it either wirelessly, like it says it is supposed to be capable of, or with it wired to my Time Capsule via USB. The last piece of advice I got from tech support at HP was this:
    "I recommend you to open the EWS Page of your router and check the MAC filtering option. I would request you to contact Apple for the assistance on the same. The printer works after connecting to Mac using USB cable and the message 'Printer offline' appears after connecting to the Apple Time capsule base station."
    I cannot figure out what the EWS page is, or how I would get to it.

    Thanks LaPastenaue.
    I ran the network utility but only the macbook had a .local suffix.  I'm struggling to understand the info from Netstat to be honest and obviously I'm not keen on sharing my network data with the rest of the interweb.
    I did try moving the TC into the same room as the HH5.  I moved all the connections from the HH and plugged them into the gigabit ethernet ports on the TC and ran one Cat6 from the TC WAN port into the HH, using it as a modem only.  This was not the setup I was hoping for as I am running out of room for kit, but annoyingly, this does give me a solid AirPlay connection on all my devices when on the TC network.
    I did a comparison on each setup with netstat and I see that in the first 'Internet' table that the TC is not mentioned in the old setup(TC in separate room) but is listed in the 'Internet' table when I have it plugged up as above.
    It seems that whenever I have the music streamer plugged in to the TC directly I get AirPlay but if it daisy chained through the HH ethernet hub I get an intermittant and flaky AirPlay connection.
    Any more thoughts?

  • Failing to load webpages when connected at work (works fine else were)

    I have a PowerBook G4 that I moved between work and other locations. I have never had any issues before, but now I am getting a very strange issue in Safari (1.3.2). If I enter the domain name of the site (say www.apple.com) it fails to ever connect, but if I put in just an IP address it is fine. This caused me to think "Hurm...DNS lookups are failing for some reason". But this seems to not be the case. I can open up terminal type "telnet www.apple.com 80" and then "GET index.html" and it works just fine. So DNS looks ups are atleast working Terminal. Also, this only occurs when I am at work. We have no other machines on the network that experience this problem. All other machines there are just fine.
    Any ideas?
    PowerBook G4   Mac OS X (10.3.9)  

    I will say that Linksys Routers are notorious for being subpar. My suggestions would be to disconnect the router and cable modem and turn off the computer (and everything).
    Then, wait fifteen minutes.
    Then, turn on the cable modem. Let it go through all its blinky phases, then turn on the router. Wait at least three minutes for ole' cranky to wake up. Now turn on your Mac.
    This is what you have to do when a router forms a bad DHCP client lease.
    An alternate first step would be to manually enter your own IP address that's the same everything except make up a 200 range number and throw it in for Z on the equation before .*..Z.
    E.G.: if your DHCP address is 192.168.3.43, make up your own ending and manually enter it. 192.168.43.200. Set the router as x.x.x.1 (e.g. 192.168.43.1) and SubNet as 255.255.255.0

  • OfficeJet 8600, offline wireless connection lost;

    i have an officejet 8600  that ive been having about a year its connected to my pc wirelessly, i am running windows 7 on pc, every so often my pc will say that my printer is offline but the printer says it is still connected to the network i have printed the Network Configuration Page from the printer and everything is the same as before...IP Address same...I read some answers to previous questions that said to go into advanced settings and change the IP Settings from Automatic to Manual...I've done that with no result....I have also restarted Router, Printer, and PC....I have even disconnected power to all 3 and then reconnected with same problem....can someone please help me....
    Thanks
    Jami 

    Let's set a static IP address in this manner for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Normal NFS client reaction when connection lost then re-established

    Say I have an NFS share mounted with defaults. There is no outstanding IO to the share and the server goes down. The server comes back up and there is an attempt to access the share. What should happen when this attempt is made? It seems to me that it should be like the server never went down. Instead, things behave more like the server never came back up: any application attempting to access it hangs indefinitely.
    Using the mount option 'soft' prevents this from happening, but it doesn't seem like one should have to risk 'silent data corruption' to prevent the client from going completely stupid when it loses contact for a period that no contact should be necessary.

    This is HIGHLY unrecommended. The NFS protocol has never, and probably will never, highly robust. VPN tunnels are prone to latency issues and session drops as a result. For this reason smb or afp or any form of FTP or sFTP is far more safe and reliable. All of these other protocols have mechanisms for reestablishing a session lost due to latency, unlike NFS. Additionally, NFS is sufficiently embedded in most UNIX kernels to potentially lock or crash the NFS client when a session goes stale. More recent versions of many OS's, including Solaris 9, have overcome the crash conditions usually caused, but at the expense of NFS filesystem integrity...

  • Proc procedure block when connection lost

    hi,
    i develop a database procedure in linux by proc,the problem as follow:
    i create a connection on another computer,when i do some operaters ,at this time,network wire break, i continue doing operaters but the procedure blocked . i configure two address in net8, the orther database server is ok,but the procedure not change the address ,the main problem is the procedure don't return any error,only blocking here.
    thanks

    hi,
    i develop a database procedure in linux by proc,the problem as follow:
    i create a connection on another computer,when i do some operaters ,at this time,network wire break, i continue doing operaters but the procedure blocked . i configure two address in net8, the orther database server is ok,but the procedure not change the address ,the main problem is the procedure don't return any error,only blocking here.
    thanks

  • IPod Restore failed, now Kernel Panic when connect to Mac

    My iPod is a little older and has had trouble updating though the iPod Updaters so in order to get the latest updater on my iPod I've had to just restor the iPod using that specific updater. iPod Updater froze during my last restore and now I have incomplete software on my iPod and connecting it to my Mac results in immediate kernel panic. How can I get my iPod back to a usable state?
    Thanks.

    Just got back from trying this idea and IT WORKS. For people that might have this problem, I booted from the CD/DVD and lauched Disk Utility and did a Repair Disk. I did it twice actually for good measure. Afterwards I booted back to the System Folder on the HD and I performed a restore of my iPod using the iPod Updater 2005-06-26.app updater. I've read that my whatever generation iPod works best with that one (I have the click wheel with the 4 buttons above it).
    Thanks for all your help.

  • Printer offline when it is on and connected to wifi

    We have a HP Officejet Pro 8100 that says it is offline when connected to the wifi. Everything was fine until recently. Now when you try to print it says the printer is offline when there is power and connection. Any help would be great!

    Hi,
    Download and run HP print and Scan Dr utility from link below to diagnose the issue.
    www.hp.com/go/tools
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • If I lost my Iphone, but when I tried to locate with ICloud - find my Iphone it's offline. I lost in another country  which means that there is no Internet connection on my phone. Is there any chance to find?

    If I lost my Iphone, but when I tried to locate with ICloud - find my Iphone it's offline. I lost in another country  which means that there is no Internet connection on my phone. Is there any chance to find?

    In order for a lost iPhone to be located you have to have set 'Find My iPhone' up on it before losing it, and it has to be on, not wiped, and able to connect to a network (how else could it transmit its location) - if any of these conditions is not true then locating it is not possible. You can't use the serial number or IMEI number to locate a phone: the former is only useful to identify it as yours if it turns up, and the latter can be used by most service providers to block it, rendering it useless and preventing anyone from spending your credit.

  • I cannot connect to internet eevnthough i have wifi,when im trying to login on FB it says unable to connect and same with YM it saysinternet connections appears to be offline,when in fact the WIFI smartbro is connected,and the signal is very strong...

    my itouch cannot connect to internet...but the other day i can use the wifi im connected,but since yesterday eventhough im connected to wifi and the signal is very strong,when im trying to login on FB it says unable to connect to FB,same with YM it says internet connection is offline when in fact i have a strong signal of wifi..

    - Reset the iPod. Nothing is lost
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    Do other devices successfully connect to the network?
    Does the iPod successfully connect to other networks?

  • After itunes update my ipod touch is not syncing correctly first I got error message..ipod failed to complete sync because connection was lost..now it wont sync new music

    After recent itunes update my ipod touch 4 is not syncing properly...I got error message twice "ipod failed to sync properly because connection was lost, please try again"... it continued acting weird, now when i click on "sync now" it says preparing to sync, it goes through steps quickly says sync finished but it doesnt update.. can anyone help?

    There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0

  • When I try and make a FaceTime call, it always says, 'Connection Lost'. Help?

    I was trying to FacceTime my friend and it was the usual screen that you get when you recieve a FaceTime call. I hit 'Accept' and it says connecting but, it always ends up saying, 'Connection Lost' or 'FaceTime Failed'. When I try and FaceTime them back it says connecting but again, says 'Connection Lost' or 'FaceTime Failed'. And help on what to do?

    There have been numerous reports of FaceTime connection issues for the last few days and it is unclear what the cause is. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?start=120&tstart=120

Maybe you are looking for