Webtools 2007 - SynchManager Error message

I cannot get a green flag in the configuration screen, I get this message...
2008-04-17 18:12:01Z - Retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F69469} failed due to the following error: 80040154.
What's up with this?
thx, Richard.

Richard, I know I tried doing this on a box w/out SAP B1 installed and it threw the same exception. This is definitely due to the DI API .dlls not being registered (see MSDN posts [here|http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=765439&SiteID=1|Error 80040154 retreiving COM Class factory]). If you didn't install the DI API either by installing SAP B1 or some other fashion, make sure you do that. If you did install the DI API, then Bryce is probably correct in his assertion that something went wrong during the installation.

Similar Messages

ICloud outlook 2007 sync error message

Tried to install iCloud control panel to outlook 2007 and error message appears and says that I need to go to the windows control panel and repair the iCloud. I repair it and have uninstalled it and reinstalled icloud control panel but I still can't get outlook and iCloud to sync. Any ideas?

Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanow

Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support

Error message: Missing PDF maker files in Word 2007

OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
Thanks in advance!
Alycia

for Office 2007, see if this Microsoft product will work for you
http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

Excel 2007 = Refresh All = Error Message "Initialization Data Source Failed"

Excel 2007 => Data Tab - Refresh All => Error Message "Initialization Data Source Failed
2nd Error message:
The following data ranged failed to refresh: ExternalData1 - Continue to refresh all
How do I resolve this? Trying to connect to Oracle DB environment 12C

What will happen if you rebuild the PivotTable/Table ?
Make sure the external database is available and the Oracle Provider for OLE DB is installed correctly.
Wind Zhang
TechNet Community Support

Error message when opening a shared workbook with Excel 2007

Hello,
We would like to share a workbook outside BW (by saving into a serveur).Since we use Excel 2007, we can't anymore open this workbook.
We have a message error (see bellow).
For your information, it was ok with Excel 2003.
When whe save the workbook in local disk and then copy from local disk
to a serveur, it's ok.
We use SAPGUI 7.10 support package 8, patch 1 Revision 1443 & BI 7.0.
Best regards
Nicolas Triqnuand

hey Nicolas,
first of all, your error message is in French... not too many people out there will be able to understand. Eventhough I do understand French, it doesn't make much sense to me... BUT... in Excel2007 all macro's are by default disabled. When you enable them (you should get a "Security Warning" right under "the Ribbon"), your BI stuff should work again.
Just gave it a try, and it runs smoothly over here.
Cheers,
RafB

Error Message when we create a Service Ticket in SAP CRM 2007

Hi All we are having a serious production issue when we create a S.Ticket in SAP CRM 2007 We get the following error message we are not trying to send any information to R/3 We have a planned go live this saturday. So any help would be greatly appreciated.
An error occurred in system EDIES during account assignment
Message no. CRM_ORDER_MISC 060
Diagnosis
Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
Transfer Log
No controlling type could be determined (Notification E IAOM 012)
No controlling type could be determined (Notification E IAOM 012)
Regards
Sathya

Hi,
I have looked into your issue.
For this service ticket, kindly check the Org Unit maintained in Transaction and table OFIC_BILLORG_SRV are same. If not same kindly make changes in the following path in SPRO.
==> SAP Implementation Guide
==> Customer Relationship Management
==> Organizational Management
==> Cross-System Assignment of Organizational Units
==> Assign Billing Units to Service/Sales Organizations
If the above information is not helpful kindly take a look at note 861116.
I hope this helps.
Regards,
Venkat

Posting A Park document of year 2005 in 2007( Error message no. FP 041)

Hi All
I have a parked document in year 2005 and know the user want the same to post in 2007. while changing the header(posting date and making as 01.01 2007) through T.code MR44.
I am getting the following error.
Changing of document number or fiscal year not possible here
Message no. FP 041
Please let me know whether i can post a parked document of 2005 in 2007.
or any way to rectify the same.
regards
Ramesh

How can we change a parked document's fiscal year?
I parked a document in fiscal year 2011, period 01. now I want to post it in fiscal year 2010, period 12.
When I use FBV2 to change header information, it shown up an error message:
Changing of document number or fiscal year not possible here
Message no. FP041.
How can I do now?
Thanks.

Error Message when trying to "Save Email as Activity" on Outlook 2007

Hi all,
This is a problem that we have logged with SAP, but they cannot find any reasons as to why we are having the problem. So I'm hoping someone here might be able to shed some light...
After logging onto SAP through Outlook:
When "Saving an email as Activity" using the Outlook ADDON, we get the following error message:
AppName: bo_syncext.exe AppVer: 8.0.0.49 ModName: bo_syncext.exe
ModVer: 8.0.0.49 Offset: 000cc9d5
This does not seem to work on any of our computers, except one!
He is a Superuser, and he can save emails on his PC only.
I can also save the emails, if I am logged on his computer, and am set up as a Superuser. I cannot if I am not a Superuser.
He and I cannot send emails as a Superuser on my PC.
This would lead me to think that it is a problem with our PC settings (security settings?).
Has anyone else had this problem?
Outlook version: 2007 (12.0.6514.5000) SP2 MSO (12.0.6425.1000)
SAP Business One 2007.
Many thanks
Shaoni

Hi
I also have the same issue.
I can save an email as an activity for only one user, this user is a super user.
If i log on to that users machine as them, then sap as a user with the issue change them to a super user it works.
However logged on to any other machine it won't work. We get the error message ;-
Outlook itegration - error signature - AppName bo_syncext.exe, AppVer 8.0.0.49 Mod Name ntdll.dll ModVer 5.1.2600.3520
Has anyone fixed this on a system ???

Not able to install Logic on mac with OSX. 10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!

Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

HT1386 I've updated my 2007 MacBook to 10.6.8, and now my iPhone 3 (used as iPod) and iPhone 4 aren't recognized to be synced anymore or I get an error message telling me to update my phone to 11.1 or something. When I do that is appears to update and whe

I've updated my 2007 MacBook to 10.6.8, and now my iPhone 3 (used as iPod) and iPhone 4 aren't recognized to be synced anymore or I get an error message telling me to update my phone to 11.1 or something. When I do that is appears to update and when finished nothing appears to have updated.

It is possible one of the 10.6.8 updates may help:
Combo v1.1 (7/25/2011), 10.6.8 2013 Security Update 004, 2013-005 Java update.
Note, your machine is too old to use the latest Java from http://www.java.com/

Upgraded 2007 to 8.8 PL15 and get error message when opening sales orders

Hi , I have upgraded an SBO system from 2007 to 8.8, PL15 and I get an error message whenever I recall a sales order entered after June 9th 2010. I do not get any error messgas on orders before that date. I can add new order no problem. Teh error message is:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]The conversion of a nvarchar data type to a datetime data type resulted in an out-of-range value.
'' (CRD2)
I have not got any UDFs that are date type...
Any ideas?
Thanks in advance!
Simon

Dear Simon,
Issue could be related to SBO_SP_TransactionNotification. Please comment out the code in the store procedure SBO_SP_TransactionNotification (Section: ADD YOUR CODE HERE)
and try to reproduce the issue again.
Regards,
Ladislav Meszaros
SAP Business One Forum Team

I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars. I downloaded it for the first time a month ago and had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error. What do I do now? Can anyone help with this?

Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

WebTools 2007 - Messaging Set Up

Hello everyone,
Are there any instructions to setting up messaging in WebTools 2007? I am using patch 4, but cannot find any documentation out there to set this up. If someone could please point me in the right direction it would be greatly appreciated.
Thank you,
Kristen

Hi Fristen,
I just been working through this and finally have most of it working. The key for me for outbound emails was to use the local SMTP server instead of trying to send straight out to an external smtp server.   If you haven't done this I'd suggest:
1. admin/common/webconfig/webconfigs.aspx - Messaging options
    - Make sure you have C:\Inetpub\mailroot\Pickup (or relevant path for your local SMTP server pickup dir).
    - Make sure you have no value in the SMTP server host field (so it uses the local pickup dir)
    - Make sure you have any options tcked you need for sending emails (campaigns, orders, deliveries etc).
2. In IIS, for the SMTP server properties, go to the Delivery tab (windows server 2003) and choose advanced. You need to
   set the smart host value to the external SMTP server.
3. To test from here, firstly stop your local SMTP server and run your scenario. WebTools should generate the outbound
    emails and leave them in the Pickup directory. Open one and check the content is as expected.
4. Restart your SMTP server and it should send out the pending emails. If that works, but they never arrive you may have
    spam filtering or something else outside of webtools intercepting them.
The only loggin I know of is under Program File\SAP\SAP Business One Web Tools\Installer\logs. The current.log is an XML log capturing the high level steps of messaging. It will only tell you which phases of messaging it's going through though - I don't believe there's any way to enable low level loging.
Good luck with it. I have all the above working fine, but have not been able to get processing of bounce emails working - which is needed for campaign reporting. If you get that working I'd love to hear that!

HT204150 Getting error message ("The set of folders cannot be opened") when clicking on "iCloud' folder in Outlook 2007. Lost contacts and calendar in outlook 2007 while installing icloud.

Vista + Outlook 2007 + Icloud : Lost all contacts and calendar in outlook when installing/Synchronizing iCloud. Both still available on iphone and iCloud.
How to get them back in Outlook? Understand iCloud erased them and transferred them in an other outlook account. In Outlook 2007, I can see a folder called "iCloud" but get an error message ("The set of folders cannot be opened...") when clicking on it. I suspect all is there, but no access possible. I assume some Outlook settings are uncorrect, but wonder which settings...?

Well. Working just fine now, since uninstalling and re-installing icloud and syncing.

Webtools 2007 - SynchManager Error message

Similar Messages

Maybe you are looking for